Search NASA⌕ Search

SEARCH · Search NASA

Results for “summary data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Summary of forward velocity effects on fan noise

Available experimental data comparing the in-flight and static behavior of fan noise are reviewed. These results are then compared with recent data obtained for a fan stage tested with forward velocity in a low speed wind tunnel. Tentative conclusions are presented about the significance and nature of the changes in noise observed when a forward velocity is imposed. Finally, the implications of the emerging picture of in-flight fan source noise for suppressor design are discussed.

Feiler, C. E.↗

An analysis of maximum vertical gusts recorded at NASA's 150-meter ground winds tower facility at Kennedy Space Center, Florida

A statistical summary is presented of vertical wind speed data recorded at NASA's 150-Meter Ground Winds Tower Facility on Merritt Island, Kennedy Space Center, Florida. One year of continuous around-the-clock vertical wind speed measurements processed by the Automatic Data Acquisition System (ADAS) is classified as a function of tower level (10, 18, 60, and 150 meters) and period of reference day, month, season: winter (October through March) and summer (April through September), and annual. Intensity, frequency, time of occurrence, prevailing conditions, etc., of the daily maximum vertical gusts (i.e., updraft and downdraft) are determined. The results are compared with the vertical gusts associated with the daily maximum horizontal gust. The intent of this summarization of vertical wind speed data is to provide a general description of wind flow in the lower 150 meters of the atmosphere for the identification of hazards involved in wind shear encounters relative to ascent and descent of the Space Shuttle and conventional aircraft.

Alexander, M. B.↗

Stiffness and damping of elastomeric O-ring bearing mounts

A test rig to measure the dynamic stiffness and damping of elastomer O rings was described. Test results for stiffness and loss coefficient in the frequency range from 50 Hz to 1000 Hz are presented. Results are given for three different materials, for five temperatures, for three amplitudes, for five values of squeeze for three values of stretch for three values of cross-section diameter and for three values of groove width. All test data points were plotted. In addition, trend summary plots were presented which compare the effect of material, temperature, amplitude, squeeze, stretch, cross-section diameter, and groove width. O ring deflections under a static load for different material were presented; and effective static stiffness values were compared with dynamic values.

Smalley, A. J.↗

Noise characteristics of upper surface blown configurations: Summary

A systematic experimental program was conducted to develop a data base for the noise and related flow characteristics of upper surface blown configurations. The effect of various geometric and flow parameters was investigated experimentally. The dominant noise was identified from the measured flow and noise characteristics to be generated downstream of the trailing edge. The possibilities of noise reduction techniques were explored. An upper surface blown (USB) noise prediction program was developed to calculate noise levels at any point and noise contours (footprints). Using this noise prediction program and a cruise performance data base, aircraft design studies were conducted to integrate low noise and good performance characteristics. A theory was developed for the noise from the highly sheared layer of a trailing edge wake. Theoretical results compare favorably with the measured noise of the USB model.

Reddy, N. N.↗

Product pricing in the Solar Array Manufacturing Industry - An executive summary of SAMICS

Capabilities, methodology, and a description of input data to the Solar Array Manufacturing Industry Costing Standards (SAMICS) are presented. SAMICS were developed to provide a standardized procedure and data base for comparing manufacturing processes of Low-cost Solar Array (LSA) subcontractors, guide the setting of research priorities, and assess the progress of LSA toward its hundred-fold cost reduction goal. SAMICS can be used to estimate the manufacturing costs and product prices and determine the impact of inflation, taxes, and interest rates, but it is limited by its ignoring the effects of the market supply and demand and an assumption that all factories operate in a production line mode. The SAMICS methodology defines the industry structure, hypothetical supplier companies, and manufacturing processes and maintains a body of standardized data which is used to compute the final product price. The input data includes the product description, the process characteristics, the equipment cost factors, and production data for the preparation of detailed cost estimates. Activities validating that SAMICS produced realistic price estimates and cost breakdowns are described.

Chamberlain, R. G.↗

Outdoor tests of the concentric-tube collector

Seventy two element, air-filled version of concentric-tube solar collector recently underwent 2 month performance evaluation at Marshall Space Flight Center solar house. Summary of results, along with other relevant data, is presented in 27 page report.

Source record↗

Eutectic alloys. Citations from the International Aerospace Abstracts data base

These 250 abstracts from the international literature provide summaries of the preparation, treatments, composition and structure, and properties of eutectic alloys. Techniques for directional solidification and treatments including glazing, coating, and fiber reinforcement are discussed. In addition to the mechanical and thermal properties, the superconducting, corrosion, resistance, and thermionic emission and adsorption properties are described.

Moore, P.↗

Applications of HCMM satellite data to the study of urban heating patterns

A research summary is presented and is divided into two major areas, one developmental and the other basic science. In the first three sub-categories are discussed: image processing techniques, especially the method whereby surface temperature image are converted to images of surface energy budget, moisture availability and thermal inertia; model development; and model verification. Basic science includes the use of a method to further the understanding of the urban heat island and anthropogenic modification of the surface heating, evaporation over vegetated surfaces, and the effect of surface heat flux on plume spread.

Carlson, T. N.↗

Venus gravity anomalies and their correlations with topography

This report provides a summary of the high-resolution gravity data obtained from the Pioneer Venus Orbiter radio tracking data. Gravity maps, covering a 70 deg latitude band through 360 deg of longitude, are displayed as line-of-sight and vertical gravity. Topography converted to gravity and Bouguer gravity maps are also shown in both systems. Topography to gravity ratios are made over several regions of the planet. There are markedly different ratios for the Aphrodite area as compared to the Beta and Atla areas.

Sjogren, W. L.↗

Space station needs, attributes and architectural options. Volume 1: Executive summary NASA

The uses alignment plan was implemented. The existing data bank was used to define a large number of station requirements. Ten to 20 valid mission scenarios were developed. Architectural options as they are influenced by communications operations, subsystem evolvability, and required technology growth are defined. Costing of evolutionary concepts, alternative approaches, and options, was based on minimum design details.

Source record↗

Initial placement of STO instruments

The current plans for the placement of the Solar Terrestrial Observatory (STO) space station will make use of each of the currently planned space station elements - the manned space station, the polar platform, and the coorbiting platform. A designation of the instrument placement on each element along with a summary of the mass, volume, power and data requirements which these instrument will impose is provided in tabular form.

Source record↗

Initial placement of STO instruments

The current plans for the placement of the Solar Terrestrial Observatory (STO) space station will make use of each of the currently planned space station elements - the manned space station, the polar platform, and the coorbiting platform. A designation of the instrument placement on each element along with a summary of the mass, volume, power and data requirements which these instrument will impose is provided in tabular form.

Source record↗

Shuttle/spacelab contamination environment and effects handbook

This handbook is intended to assist users of the Spacelab/Space Transportation System by providing contamination environments and effects information that may be of value in planning, designing, manufacturing, and operating a space flight experiment. A summary of available molecular and particulate contamination data on the Space Transportation System and its facilities is presented. Contamination models, contamination effects, and protection methods information are also presented. In addition to contamination, the effects of the space environments at STS altitudes on spacecraft materials are included. Extensive references, bibliographies, and contacts are provided.

Bareiss, L. E.↗

NASA Marshall Space Flight Center solar observatory

A description is provided of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility and a summary is given of its observations and data reduction during Jan. to Mar. 1988. The systems that make up the facility are a magnetograph telescope, an H-alpha telescope, a Questar telescope, and a computer center. The data are represented by longitudinal contours with azimuth plots.

Smith, James E.↗

Comparison of aerobic fitness and space motion sickness during the Shuttle program

Space motion sickness (SMS) is an important problem for short-duration space flight; 71 percent of STS crewmembers develop SMS symptoms. The search for effective countermeasures and factors that correlate with sensitivity has been extensive. Recently, several investigators have linked aerobic fitness with motion sickness sensitivity in the 1-G or high-G environment. This paper compares the aerobic fitness of 125 Shuttle crewmembers with their SMS symptom category. Aerobic fitness data were obtained from the exercise tolerance test conducted nearest the time of launch. SMS data were derived from the medical debrief summaries. Mean maximum oxygen consumption values for crewmembers in four SMS categories (none, mild, moderate, severe) were 44.55, 44.08, 46.5, and 44.24 ml/kg per min, respectively. Scattergrams with linear regression analysis, comparing aerobic fitness and SMS symptom classification are presented. Correlation coefficients comparing SMS categories vs. aerobic fitness for men and women reveal no definite relationship between the two factors.

Jennings, Richard T.↗

Earth Sciences Requirements for the Information Sciences Experiment System

The purpose of the workshop was to further explore and define the earth sciences requirements for the Information Sciences Experiment System (ISES), a proposed onboard data processor with real-time communications capability intended to support the Earth Observing System (Eos). A review of representative Eos instrument types is given and a preliminary set of real-time data needs has been established. An executive summary is included.

Bowker, David E.↗

An investigation of mechanisms other than lightning to explain certain wideband plasma wave bursts detected in the Venusian nightside ionosphere

Several related topics are briefly discussed. Reviewed here is work on an investigation of plasma wave phenomena associated with the question of lightning on Venus. The work supported the contention that lightning is at least a candidate explanation for many of the 100 Hz-only Pioneer Venus orbital electric field detector (OEFD) signals. A review of the work on the investigation of mechanisms other than lightning to explain certain wideband plasma wave bursts detected in the Venusian nightside ionosphere is given. A summary is given of our analysis of data from 23 OEFD observing periods as well as a discussion of the properties of specifically multifrequency events. Our opportunity to work on this topic was not sufficient to draw any firm conclusions about the origins of the multifrequency bursts, but we call attention to what we consider to be several candidate sources. Also discussed are case studies to test for evidence of whistler mode propagation from subionospheric sources, results of a search for dispersive effects in the OEFD data, the results for a search for simultaneous 100 Hz and 730 Hz observations at altitudes below 150 km, changes with altitude in dispersive broadening effects in the time signatures of 100 Hz bursts, and a survey of activity at altitudes above 1000 km.

Carpenter, D. L.↗

Bodies with noncircular cross sections and bank-to-turn missiles

A development status evaluation is presented for the aerodynamics of missile configurations with noncircular cross-sections and bank-to-turn maneuvering systems, giving attention to cases with elliptical and square cross-sections, as well as bodies with variable cross-sections. The assessment of bank-to-turn missile performance notes inherent stability/control problems. A summary and index are provided for aerodynamic data on monoplanar configurations, including those which incorporate airbreathing propulsion systems.

Jackson, C. M., Jr.↗