Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Nanostructures evolution assessment and spectroscopic properties modification induced by electronic energy loss in KTaO 3 crystal

Modifications of micro/nanostructure and photoelectric properties under swift ion irradiation (645 MeV Xe 35+ ) of KTaO 3 crystal with varying electronic energy losses (7.2–31.4 keV/nm) and ion velocities (0.18–5.00 MeV/u) have been studied by combining experimental and calculated approaches. The i-TS calculations combined with molecular dynamics simulations are compared with the experimental observations, revealing the inner track fine structures from individual spherical defects to continuous ion tracks with core–shell morphologies, and a quantitative relationship, including the melting (0.42 eV/atom), damage (0.75 eV/atom), and amorphous (1.71 eV/atom) thresholds, is established to successfully predict the inner disorder/amorphous proportions and track damage morphologies. The surface nanostructures of nanohillocks (isolated or partial overlaps) and nanopits (serious overlaps) directly depend on the combined action of the deposited potential and kinetic energies of incident ions, which induce local melting and sublimation in the near-surface region. Owing to the decreased recombination and the increased separation efficiency between electrons and holes, the higher photogenerated charge carrier mobility enhanced the photocurrent effect, further optimizing the photoconductivity performance in Xe 35+ -irradiated KTaO 3 . Therefore, controlled defect engineering using the ion irradiation technique, as an effective strategy, could design tailored nanostructure systems and regulate photoelectric properties, further promoting the development of novel technological applications.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of SnO{sub 2} nanorods: Morphology dependence, growth mechanism and surface properties

Graphical abstract: - Highlights: • Urchin-like nanorod clusters were synthesized by a facile hydrothermal process. • The influence of synthetic parameters on formation of SnO{sub 2} products was studied. • The growth mechanism of SnO{sub 2} nanorods was proposed from valuable insights. • The surface properties of SnO{sub 2} nanorods were investigated. - Abstract: Uniform tetragonal-shaped SnO{sub 2} nanorods and their urchin-like clusters were successfully synthesized via a template-free hydrothermal process. The resulting nanorods were characterized by power X-ray diffraction (PXRD), field emission scanning electron microscope (FESEM), high resolution transmission electron microscope (HRTEM), infrared absorption spectra (IR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TG) and ultraviolet–visible (UV–vis) absorption spectra. The influence of precursor, solvent, hydrothermal temperature and treatment time on the formation of SnO{sub 2} nanostructures was investigated. Moreover, the surface properties of SnO{sub 2} nanorods were studied.

36 MATERIALS SCIENCE↗

A facile approach to prepare graphene via solvothermal reduction of graphite oxide

Highlights: • Graphene was prepared via a novel and facile solvothermal reduction method for graphite oxide. • Most of the oxygen functional groups of graphite oxide were removed. • The reduced graphene oxide obtained was featured with bilayer nanosheets. - Abstract: In this work, a facile reduction strategy is reported for the fabrication of graphene. Graphite oxide (GO) is reduced via a novel solvothermal reaction in a mixed solution of acetone and sodium hypochlorite (NaClO). The structure, surface chemistry, morphology and thermal stability of the as-prepared reduced graphene oxide (RGO) are characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, transmission electron microscopy (TEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). The results indicate that most of the oxygenated groups in GO are effectively removed in this solvothermal reaction. The novel reduction method provides a simple, cost-effective and efficient strategy for the fabrication of graphene.

36 MATERIALS SCIENCE↗

Investigation of deformation mechanisms in an advanced FeCrAl alloy using in-situ SEM-EBSD testing

The deformation mechanisms associated with uniaxial tensile testing are observed by conducting tensile experiments of an FeCrAl alloy using scanning electron microscopy (SEM) coupled with electron backscattered diffraction (EBSD). Prior to the deformation, investigated alloy was consisting grain and precipitate size of ~63.0 μm and ~6.7 μm, respectively. The recorded SEM micrographs and EBSD data at increasing levels of strains revealed the complex phenomena of slip bands’ formation in the presence of surface grain morphology evolution and their (001), (110) and (111) crystallographic planes distortions. The grains with orientation (110)||tensile direction (TD) shows higher shape change; however, (001)||TD and (111)||TD oriented grains show higher lattice gradient formation. Extracted information from the EBSD indicates that the crystallographic rotations drive towards specific, fiber-like texture in relation to the loading direction. Postmortem analysis of the recorded microstructure during the tensile deformation explains the phenomena of crack formation in the hard-intermetallic particles before the ultimate tensile strength (UTS). However, after the UTS, pores were identified in the neck that resulted from extensive plastic deformation. In-depth analysis was carried out to identify the cause of cracks and pores formation phenomena during the tensile test.

36 MATERIALS SCIENCE↗

The effect of heat treatment on structural and electronic properties of niobium nitride prepared by a thermal diffusion method

NbN coatings are prepared onto Nb substrate by thermal diffusion at high temperatures. The formation of NbN coating by thermal diffusion was studied in the range of 1250-1500 °C at constant nitrogen background gas pressure (1.3x10 -3 Pa) and processing time (180 min). The electronic and crystal structures of the NbN coatings were investigated. It was found that nitrogen diffuses into Nb forming the Nb-N solid solution (bcc) a-NbN phase that starts to appear above 1250 °C. Increasing the processing temperature gives richer a-phase concentration. Besides, X-ray absorption spectroscopy (XAS) was performed to study the electronic structure of the NbN layer. The results of the electronic structural study corroborate the crystal structural analysis. The Nb M 3,2 edge X-ray absorption spectroscopy (XAS) spectrum shows strong temperature dependence. At the highest processing temperature (1500 °C), the number of d holes increased. Nitrogen diffusion into Nb is resulting to increase electrostatic interaction between d electron and core hole. Lastly, for the studied conditions, only the α-NbN was observed in the X-ray diffraction patterns.

36 MATERIALS SCIENCE↗

Insights into Mechanisms of Screw Feeder Plugging by Heated Pine Forestry Residues Using in-situ and Correlative Microscopy

Increasing concerns about global carbon emissions due to fossil fuel use has created interest in renewable fuel alternatives, such as lignocellulosic biomass. With an estimated global biomass production probability ten-fold higher than projected need, functionalizing and scaling biomass conversion processes, like pyrolysis, is a promising component of a diverse sustainable energy program (Kan, Strezov, & Evans, 2016). Pyrolysis reactors employed in biomass conversion often encounter the known problem of screw feeder plugging, halting work and reducing efficiency of biorefineries. Although the screw feeder is not heated directly, conductive heat transfer from the fluidized bed pyrolysis reactor creates a temperature gradient, where particles experience temperatures between 22°C and 500°C from the time they enter the feeder to being emptied into the reactor (Digman, Joo, & Kim, 2009; Nieminen & Folke, 1982). The impact of unintentional heating on this highly variable feedstock may result in particle morphology modification, surface texture transformation, and the evolution of viscous compounds and may contribute to screw feeder plugging (Haas, Nimlos, & Donohoe, 2009; Ingram et al., 2008). We hypothesized that particles of various anatomical fractions (including needles, branches, bark, cambium, and whitewood) will experience dramatic changes during this heating regime, which will be characterized by decreased particle size, increased surface roughness, degradation of key structural macromolecules, and generation of viscous compounds that would result in increased particle friction and cohesion, contributing to screw feeder plugging.

biofuels↗

Synthesis of Large Mesoporous–Macroporous and High Pore Volume, Mixed Crystallographic Phase Manganese Oxide, Mn 2 O 3 /Mn 3 O 4 Sponge

The controlled synthesis of mixed crystallographic phase Mn 2 O 3 /Mn 3 O 4 sponge material by varying heating rates and isothermal segments provides valuable information about the morphological and physical properties of the obtained sample. The well-characterized Mn 2 O 3 /Mn 3 O 4 sponge and applicability of difference in reactivity of H 2 and CO 2 desorbed during the synthesis provide new developments in the synthesis of metal oxide materials with unique morphological and surface properties. Here, we report the preparation of a Mn 2 O 3 /Mn 3 O 4 sponge using a metal nitrate salt, water, and Dextran, a biopolymer consisting of glucose monomers. The Mn 2 O 3 /Mn 3 O 4 sponge prepared at 1 °C·min –1 heating rate to 500 °C and held isothermally for 1 h consisted of large mesopores–macropores (25.5 nm, pore diameter) and a pore volume of 0.413 mL/g. Furthermore, the prepared Mn 2 O 3 /Mn 3 O 4 and 5 mol %–Fe-Mn 2 O 3 /Mn 3 O 4 sponges provide potential avenues in the development of solid-state catalyst materials for alcohol and amine oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Structure of Adsorbed Water Phases in Silica Nanopores

The adsorption of water vapor in silica nanopores with different pore morphologies and surface hydrophilicities was studied to quantify the densities and thicknesses of the water sorption layers and deduce their molecular structures. Water adsorption to surface hydroxyls is described by a multilayer sorption model. At low pressure, the water adsorption isotherms are largely independent of pore size and the adsorbed amounts scale with the surface hydroxyl density. Adsorbed-phase densities corresponding to the adsorption of two water molecules per surface hydroxyl group are found in the first adsorbed water layer for a wide range of surface hydroxyl densities. The densities and layer thickness values found in narrow pores indicate that patchy adsorbed layers form if not enough water molecules exist for a full layer, which coexist with dry pore surface regions. This behavior indicates cooperative adsorption effects, i.e., a preference for the formation of hydrogen bonds between water molecules bound to surface hydroxyls. In narrow pores, pore condensation limits further growth of the sorption layer, and in larger pores and at the planar quartz surface, a second adsorbed water layer is formed, which can hold up to approximately 4 additional water molecules per surface hydroxyl group. The water molecules in these thicker adsorption layers arrange such that the sorption layer density is similar to the bulk water density. Pore confinement limitations on the sorption layers are observed in pores with radii of as large as 8 nm. Molecular dynamics modeling reveals two preferential orientations for water molecules adsorbing to surface hydroxyl groups and suggests an intralayer structuring in the adsorbed monolayer. Furthermore, adsorbed water molecules in the sorption layer are bonded to the surface hydroxyl group via the donation and acceptance of hydrogen bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MoS 2 Nanoclusters Grown on TiO 2 : Evidence for New Adsorption Sites at Edges and Sulfur Vacancies

MoS 2 clusters have been grown on a TiO 2 (110) substrate to provide a model surface for better understanding the adsorbate interactions and chemical activity on titania-supported MoS 2 clusters. Scanning tunneling microscopy experiments show that clusters with elongated shapes and flat tops are formed, and the long axes of the clusters have specific orientations with respect to the [001] direction on TiO 2 (110). In contrast, deposition of Mo in the absence of H 2 S results in a high density of smaller, round clusters that cover the majority of the surface. The morphologies of the MoS 2 clusters do not change after exposure to various gases (D 2 , CO, O 2 , H 2 O, and methanol) in ultrahigh vacuum. However, exposure to higher pressures of O 2 , H 2 O, or methanol (10 Torr), as well as exposure to air, causes the clusters to disintegrate as Mo in the clusters becomes oxidized. Temperature-programmed desorption studies with CO on the MoS 2 clusters show a distinct desorption peak at 280 K, which is not observed on metallic Mo or titania. Finally, density functional theory calculations suggest that these new adsorption sites for CO are at the edges of the elongated MoS 2 clusters, particularly along the ($10\bar{1}0$) edge containing sulfur vacancy sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into Waterflooding in Hydrocarbon-Bearing Nanochannels of Varying Cross Sections from Mesoscopic Multiphase Flow Simulations

Waterflooding is one of the geotechnique used to recover fuel sources from nanoporous geological formations. The scientific understanding of the process that involves the multiphase flow of nanoconfined fluids, however, has lagged, mainly due to the complex nanopore geometries and chemical compositions. To enable benchmarked flow of nanoconfined fluids, the architected geomaterials, such as synthesized mesoporous silica with tunable pore shapes and surface chemical properties, are used for designing and conducting experiments and simulations. This work uses a modified many-body dissipative particle dynamics (mDPD) model with accurately calibrated parameters to perform parametric flow simulations for studying the influences of waterflooding driven power, pore shape, surface roughness, and surface wettability on the multiphase flow in heptane-saturated silica nanochannels. Remarkably, up to 80\% reduction in the effective permeability is found for water-driven heptane flow in a baseline 4.5 nm-wide slit channel, when compared with the Hagen–Poiseuille equation. In the 4.5 nm-wide channels with architected surface roughness, the flow rate is found either higher or lower than the baseline case, depending on the shape and size of cross-sections. High wettability of the solid surface to water is essential for achieving high recovery of heptane, regardless of surface roughness. When the solid surface is less wetting or non-wetting to water, the existence of an optimal waterflooding driven power is found to allow for the highest possible recovery. A detailed analysis on the evolution of the transient water-heptane interface in those nanochannels is presented to elucidate the underlying mechanisms that impact or dictate the multiphase flow behaviors.

58 GEOSCIENCES↗

Model Lung Surfactant Films: Why Composition Matters

Lung surfactant replacement therapies, Survanta and Infasurf, and two lipid-only systems both containing saturated and unsaturated phospholipids and one containing additional palmitic acid were used to study the impact of buffered saline on the surface activity, morphology, rheology, and structure of Langmuir monolayer model membranes. Isotherms and Brewster angle microscopy show that buffered saline subphases induce a film expansion, except when the cationic protein, SP-B, is present in sufficient quantities to already screen electrostatic repulsion, thus limiting the effect of changing pH and adding counterions. Grazing incidence X-ray diffraction results indicate an expansion not only of the liquid expanded phase but also an expansion of the lattice of the condensed phase. The film expansion corresponded in all cases with a significant reduction in the viscosity and elasticity of the films. The viscoelastic parameters are dominated by liquid expanded phase properties and do not appear to be dependent on the structure of the condensed phase domains in a phase separated film. Here, the results highlight that the choice of subphase and film composition is important for meaningful interpretations of measurements using model systems.

36 MATERIALS SCIENCE↗

Inhibition of AlF3·3H2O Impurity Formation in Ti3C2Tx MXene Synthesis under a Unique CoFx/HCl Etching Environment

MXenes, most commonly transition metal carbides, are a family of two-dimensional (2D) materials with promising potential in, among other applications, supercapacitors and batteries. MXenes are synthesized by etching of aluminum or gallium layers in its parent MAX phase directly by HF or by HF in situ formation using a fluoride salt and strong acid. A commonly undesired byproduct of MXene synthesis is AlF3·3H2O. To relieve MXenes from AlF3·3H2O impurity, it is important to elucidate the factors that drive its formation. Here, we dually deduce the conditions that lead to AlF3·3H2O formation while exploring etching with cobalt fluorides (CoF2/CoF3). Previously uncharacterized, etching with cobalt fluorides offers a forthright method to etch MXenes while intercalating cobalt cations. The influence of this etching environment and AlF3·3H2O formation on MXene’s structure, morphology, and surface bonding is investigated. Ionic strength of solution used for etching is found to be a critical driving factor in the formation of AlF3·3H2O impurity formation. Specifically, when the ionic strength falls between ~8.5 and 10 M, AlF3 complexation is stable. As a result, Ti3C2Tx MXene phase with AlF3·3H2O impurity is obtained. In contrast, near-pure MXene is the only solid state product when I is smaller than 8.5 M or larger than 10 M. Hence, high purity MXene phase can be synthesized by subtle compositional tuning to manipulate the ionic strength of the etching environment.

Cockerham, Cody B.↗

Na 2 Ti 3 O 7 Nanoplatelets and Nanosheets Derived from a Modified Exfoliation Process for Use as a High-Capacity Sodium-Ion Negative Electrode

The increasing interest in Na-ion batteries (NIBs) can be traced to sodium abundance, its low cost compared to lithium, and its intercalation chemistry being similar to that of lithium. We report that the electrochemical properties of a promising negative electrode material, Na 2 Ti 3 O 7 , are improved by exfoliating its layered structure and forming 2D nanoscale morphologies, nanoplatelets, and nanosheets. Exfoliation of Na 2 Ti 3 O 7 was carried out by controlling the amount of proton exchange for Na + and then proceeding with the intercalation of larger cations such as methylammonium and propylammonium. An optimized mixture of nanoplatelets and nanosheets exhibited the best electrochemical performance in terms of high capacities in the range of 100–150 mA h g –1 at high rates with stable cycling over several hundred cycles. These properties far exceed those of the corresponding bulk material, which is characterized by slow charge-storage kinetics and poor long-term stability. The results reported in this study demonstrate that charge-storage processes directed at 2D morphologies of surfaces and few layers of sheets are an exciting direction for improving the energy and power density of electrode materials for NIBs.

25 ENERGY STORAGE↗

SnO 2 Nanostructured Thin Films for Room-Temperature Gas Sensing of Volatile Organic Compounds

Here, we demonstrated room-temperature gas sensing of volatile organic compounds (VOCs) using SnO 2 nanostructured thin films grown via the aerosol chemical vapor deposition process at deposition temperatures ranging from 450 to 600 °C. We investigated the film’s sensing response to the presence of three classes of VOCs: apolar, monopolar, and biopolar. The synthesis process was optimized, with the most robust response observed for films grown at 550 °C as compared to other temperatures. The role of film morphology, exposed surface planes, and oxygen defects were explored using experimental techniques and theoretical calculations to improve the understanding of the room-temperature gas sensing mechanism, which is proposed to be through the direct adsorption of VOCs on the sensor surface. Overall, the improved understanding of the material characteristics that enable room-temperature sensing gained in this work will be beneficial for the design and application of metal oxide gas sensors at room temperature.

36 MATERIALS SCIENCE↗

Nanoporous Gold: Understanding the Origin of the Reactivity of a 21st Century Catalyst Made by Pre-Columbian Technology

Nanoporous gold (np-Au), a three-dimensional nanoporous bulk material, is made by selective corrosion of Ag from Ag–Au alloys, a technique already applied by the pre-Columbian cultures of South America. Nanoporous gold is actually a Au-rich Ag–Au alloy which, specifically the Ag 0.03 Au 0.97 composition, combines high reactivity and selectivity for a wide variety of oxidation reactions, from simple CO oxidation to complex oxygen-assisted coupling reactions. Its catalytic reactivity is surprising because np-Au is a nonsupported Au catalyst with relatively large feature sizes on the order of tens of nanometers, thus breaking the generally accepted notion that gold must be in the form of small particles (about a few nanometers) to be an active catalyst. The ease of sample preparation in combination with high reactivity, selectivity, and long-term stability suggests that nanoporous gold has the potential to bring Au catalysis closer to practical applications. We provide a critical review of the current understanding of the origin of the high catalytic activity of nanoporous gold in context of morphology and surface composition in this perspective.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗