Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Long-Lived In-Situ Solar System Explorer (LLISSE)

Venus, while having similar size, mass, and location in the solar system to Earth, varies from Earth in many ways. The differences include its climate, atmosphere, and surface conditions. Surface conditions present formidable engineering challenges due to the high temperature and pressure. To date, landed missions have not been able to last more than about 2 hours on the surface [1]. This has resulted in significant knowledge gaps about the surface conditions of this important body in the solar system. The science community has effectively no in-situ temporal data on Venus surface conditions (temperature, pressure, winds and chemistry). These data are critical for the development of a thorough understanding of Venus' weather and the processes by which chemical species interact with each other, and are transported throughout the atmospheric column. This will help understand aspects of the atmosphere/planet interactions such as momentum exchange. To date, no capability has been available to enable a long lived surface probe to make these kinds of measurements. However, recently developed Silicon Carbide based electronics, sensors, and other technologies have matured to a state where a simple, but powerful long-life scientific probe would be feasible for Venus. It is now possible to directly qualify the durability and functionality of these components in a simulated Venus surface environment and demonstrate the ability to return valuable scientific data.

Probe↗

Titan's global map combining VIMS and ISS mosaics

Titan, Saturn’s largest moon, is the only ocean world, besides Earth, with a dense atmosphere. This outstanding feature is also a challenge since it was believed before the launch of the Cassini mission that optical cameras (visible and infrared) could not see the surface and that only radar instruments could map Titan’s surface. However, the Visual and Infrared Mapping Spectrometer (VIMS) and the Imaging Science Subsystem (ISS) onboard the Cassini spacecraft demonstrated that Titan’s surface can be observed in several infrared atmospheric windows.

Turtle, Elizabeth P.↗

A preliminary study of Mars rover/sample return missions

The Solar System Exploration Committee (SSEC) of the NASA Advisory Council recommends that a Mars Sample Return mission be undertaken before the year 2000. Comprehensive studies of a Mars Sample Return mission have been ongoing since 1984. The initial focus of these studies was an integrated mission concept with the surface rover and sample return vehicle elements delivered to Mars on a single launch and landed together. This approach, to be carried out as a unilateral U.S. initiative, is still a high priority goal in an Augmented Program of exploration, as the SSEC recommendation clearly states. With this background of a well-understood mission concept, NASA decided to focus its 1986 study effort on a potential opportunity not previously examined; namely, a Mars Rover/Sample Return (MRSR) mission which would involve a significant aspect of international cooperation. As envisioned, responsibility for the various mission operations and hardware elements would be divided in a logical manner with clearly defined and acceptable interfaces. The U.S. and its international partner would carry out separately launched but coordinated missions with the overall goal of accomplishing in situ science and returning several kilograms of surface samples from Mars. Important considerations for implementation of such a plan are minimum technology transfer, maximum sharing of scientific results, and independent credibility of each mission role. Under the guidance and oversight of a Mars Exploration Strategy Advisory Group organized by NASA, a study team was formed in the fall of 1986 to develop a preliminary definition of a flight-separable, cooperative mission. The selected concept assumes that the U.S. would undertake the rover mission with its sample collection operations and our international partner would return the samples to Earth. Although the inverse of these roles is also possible, this study report focuses on the rover functions of MRSR because rover operations have not been studied in as much detail as the sample return functions of the mission.

Source record↗

Ocean Surface Flux Algorithm Effects on Tropical Indo-Pacific Intraseasonal Precipitation

Surface latent heat fluxes help maintain tropical intraseasonal precipitation. We develop a latent heat flux diagnostic that depicts how latent heat fluxes vary with the near-surface specific humidity vertical gradient (Δq) and surface wind speed (|V|). Compared to fluxes estimated from |V| and Δq measured at tropical moorings and the Coupled Ocean Atmosphere Response Experiment 3.0 (COARE3.0) algorithm, tropical latent heat fluxes in the National Center for Atmospheric Research CEMS2 and Department of Energy E3SMv1 models are significantly overestimated at |V| and Δq extrema. Madden–Julian oscillation (MJO) sensitivity to surface flux algorithm is tested with offline and inline flux corrections. The offline correction adjusts model output fluxes toward mooring-estimated fluxes; the inline correction replaces the original bulk flux algorithm with the COARE3.0 algorithm in atmosphere-only simulations of each model. Both corrections indicate reduced latent heat flux feedback to intraseasonal precipitation, in better agreement with observations, suggesting that model-simulated fluxes are overly supportive for maintaining MJO convection.

54 ENVIRONMENTAL SCIENCES↗

Morphological stability of oxygen- and nitrogen-covered Ru(112¯1)

Morphological stability of the atomically rough Ru(112¯1) surface upon annealing in NO 2 , O 2 , and NH 3 at elevated temperatures has been studied using scanning tunneling microscopy (STM), low energy electron diffraction (LEED), and Auger electron spectroscopy. The surface becomes fully faceted and covered by oxygen after annealing at T ≥ 600 K in NO 2 (10 –8 Torr) or O 2 (10 –6 Torr). The LEED and STM studies reveal that the faceted surface consists of nanoscale ridges, exposing four facets (101¯1), (011¯1), (101¯0), and (011¯0) on the ridges, and the ridge size grows as the annealing temperature increases. Details of the facet structures and reconstructions have been observed. However, no evidence is found for faceting of Ru(112¯1) to occur upon annealing in NH 3 . As a result, our findings should be important for development of Ru-based catalysts under oxygen-rich conditions.

36 MATERIALS SCIENCE↗

Quantifying and Modelling the Effect of Cloud Shadows on the Surface Irradiance at Tropical and Midlatitude Forests

Cloud shadows lead to alternating light and dark periods at the surface, with the most abrupt changes occurring in the presence of low-level forced cumulus clouds. We examine multiyear irradiance time series observed at a research tower in a midlatitude mixed deciduous forest (Harvard Forest, Massachusetts, USA: 42.53°N, 72.17°W) and one made at a similar tower in a tropical rain forest (Tapajós National Forest, Pará, Brazil: 2.86°S, 54.96°W). Here, we link the durations of these periods statistically to conventional meteorological reports of sky type and cloud height at the two forests and present a method to synthesize the surface irradiance time series from sky-type information. Four classes of events describing distinct sequential irradiance changes at the transition from cloud shadow and direct sunlight are identified: sharp-to-sharp, slow-to-slow, sharp-to-slow, and slow-to-sharp. Lognormal and the Weibull statistical distributions distinguish among cloudy-sky types. Observers’ qualitative reports of ‘scattered’ and ‘broken’ clouds are quantitatively distinguished by a threshold value of the ratio of mean clear to cloudy period durations. Generated synthetic time series based on these statistics adequately simulate the temporal “radiative forcing” linked to sky type. Our results offer a quantitative way to connect the conventional meteorological sky type to the time series of irradiance experienced at the surface.

54 ENVIRONMENTAL SCIENCES↗

Superhydrophobic Coating (2008 R&D 100 winner)

A transparent coating that is not just impermeable to water, but actually makes it bounce off a surface to help prevent corrosion, protect electronic and antiquities, or provide a new, more efficient surface to collect pure water.

36 MATERIALS SCIENCE↗

Model data for infrastructure-aware simulation of compound flooding at Alligator Bayou Watershed, southeast Texas

This dataset supports infrastructure-aware hydrologic modeling and flood scenario analysis for the Alligator Bayou Watershed, a highly managed urban watershed in Southeast Texas. It includes Jupyter notebooks for figure reproduction, model configuration files, simulation outputs, and derived products used to quantify the influence of engineered stormwater infrastructure on flood behavior across multiple spatial scales. The dataset was generated using the Watershed Workflow Python package and the Advanced Terrestrial Simulator (ATS), enabling integrated surface–subsurface hydrologic simulations on a channel-aligned mesh with explicit representations of pump stations, gate structures, detention basins, and impervious surfaces. Outputs include time series of gate and pump flows, stage observations, and water balance components, as well as spatially explicit fields of peak ponded depth and flood duration across multiple infrastructure scenarios spanning a single-location detention basin expansion, distributed drainage limitations, and compound coastal flooding. These data facilitate full reproducibility of the manuscript figures and support further research on urban flood dynamics and the role of stormwater infrastructure in shaping watershed-scale flood response.

EARTH SCIENCE > OCEANS > COASTAL PROCESSES↗

Fundamental Insights into Cathode Stability: Linking Compositional Tuning and Local Coordination in Complex Metal Oxides under Aqueous Transformations

Compositional tuning of complex metal oxides in Li-ion battery materials influences their performance as well as their end-of-life behavior, in particular, the tendency to release toxic metal cations in aqueous solution. We modeled ternary variants of a parent LiCoO 2 delafossite structure by varying the metal identity and relative amounts. This yielded ten model formulations of Li(A 4/6 B 1/6 C 1/6 )O 2 , where the material is enriched with the A metal and doped with B and C, with Ni, Mn, Co, Fe, Al, V, and Ti as constituent metals. To assess their stability in aqueous conditions, metal release energetics were calculated using a combination of Density Functional Theory calculations and thermodynamics. Metal release in ternary oxides is dictated by subtle variations in the coordination environment of the leaving group. To identify governing chemical features across diverse compositions with varying local coordination environments, we leverage random forest regression and descriptor importance analysis. A key result is that metal–oxygen orbital hybridization, quantified using a projected density-of-states-derived descriptor, H d/p , provides a physically grounded measure of interaction strength that governs metal release energetics. This refined perspective goes beyond conventional oxidation state considerations and offers more robust insights for materials science. Finally, we model defect surface-bound O 2 dimer formation as a proxy for reactive oxygen species (ROS) generation. The results show that Ni-rich compositions more readily stabilize spin-polarized O 2 dimers, corroborating experimental reports of an increased ROS-driven biological response. In conclusion, our results establish a compositional and electronic basis for metal release and surface oxygen reactivity that form a rationale for complex metal oxide design principles.

36 MATERIALS SCIENCE↗

Surface‐Atmosphere Decoupling Prolongs Cloud Lifetime Under Warm Advection Due To Reduced Entrainment Drying

Abstract An initially well‐mixed stratocumulus deck can remain overcast for several tens of hours under warm‐advection conditions, although moisture supply is cut off from the ocean due to surface‐atmosphere decoupling (stabilization of the surface‐atmosphere interface). In this study, a set of idealized large‐eddy simulations were performed to investigate the physical mechanism of how warm‐air advection impacts the evolution of a pre‐existing stratocumulus deck. To mimic warm‐air advection, we decrease the sea surface temperature linearly over time in a doubly periodic domain. Given the same initial conditions, the stratocumulus deck is more persistent when experiencing warm‐air advection than cold‐air advection. This persistence is caused by reduced cloud‐top entrainment drying due to decoupling, a process more influential than the decoupling‐induced cutoff of moisture supply. This mechanism is more notable when the free troposphere becomes more humid. The relevance of the mechanism to previous observations of less low‐level cloudiness under warm‐advection conditions is discussed.

54 ENVIRONMENTAL SCIENCES↗

Data Validation Package - April and July 2015 Groundwater and Surface Water Sampling at the Gunnison, Colorado, Processing Site

This event included annual sampling of groundwater and surface water locations at the Gunnison, Colorado, Processing Site. Sampling and analyses were conducted as specified in Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites. Samples were collected from 28 monitoring wells, three domestic wells, and six surface locations in April at the processing site as specified in the 2010 Ground Water Compliance Action Plan for the Gunnison, Colorado, Processing Site. Domestic wells 0476 and 0477 were sampled in July because the homes were unoccupied in April, and the wells were not in use. Duplicate samples were collected from locations 0113, 0248, and 0477. One equipment blank was collected during this sampling event. Water levels were measured at all monitoring wells that were sampled. No issues were identified during the data validation process that requires additional action or follow-up.

54 ENVIRONMENTAL SCIENCES↗

Tuning of Plasmons in Transparent Conductive Oxides by Carrier Accumulation

A metal naturally displays dramatic changes in its optical properties near the plasma frequency where the permittivity changes from a negative to a positive value, and the material turns from highly reflective to transparent. For many applications, it is desirable to achieve such large optical changes by electrical gating. However, this is challenging given the high carrier density of most metals, which causes them to effectively screen externally applied electrical fields. Indium tin oxide (ITO) is a low-electron-density metal that does afford electric tuning of its permittivity in the infrared spectral range. In this paper, we experimentally show the tunability of the plasma frequency of an ITO thin film by changing its sheet carrier density via gating with an ionic liquid. By applying moderate gate bias values up to 1.4 V, the electron density increases in a thin (~3 nm) accumulation layer at the surface of the 15-nm-thick ITO film. This results in notable blue shifts in the plasma frequency. These optical and electrical changes are monitored simultaneously, which facilitates construction of a model that provides a consistent picture for the dc electrical and infrared optical properties. It can be used to quantitatively predict the optical changes in the ITO layer with applied bias. Finally, this work builds our understanding of electrically tunable plasmonic materials and aids the design of ultracompact, active nanophotonic elements.

36 MATERIALS SCIENCE↗

Laser-Interference Surface Preparation for Enhanced Coating Adhesion and Adhesive Joining of Multi-Materials (Final Project Report)

This report investigates a laser-interference surface treatment as a non-contact, i.e., without major solid/liquid medium application or abrasion, and non-chemical surface preparation method for aerospace coating systems. It was proposed to use the laser-interference technique to structure surfaces of Al and/or Ti, creating "rough" surfaces with pre-engineered series of ridges and valleys at submicron scale. The science goal of this study was to develop an understanding of the surface microstructure, topology, and physical mechanisms that would improve adhesion and corrosion protection of Al2024-T3. Microstructure analysis indicates that the laser-interference structuring (LIS) was found to reduce the formation of CuMn-rich precipitates in Al 2024-T3 over a 500-800 nm depth from top surface. The X-cut and cross-hatch coating adhesion ratings indicate that the LIS specimens meet the performance requirements in the coating adhesion specifications by having a higher or identical ranking to those specimens prepared with current state-of-the-art chemical conversion or sulfuric acid anodizing. After the ASTM B117 corrosion exposure, it was found that the laser processed specimens exhibited only few blisters. It was found that the corrosion damage was minimized at a laser rastering speed of 4 mm/s, for which only 33% of specimens developed very minor corrosion damage. The ASTM D1654 creepage ratings, used to evaluate corrosion damage along the scribe lines, were found to be at least nine for all coated panels. These results indicate that the laser-interference technique with the additional acetone wiping has the potential to be further developed as a minor chemical surface preparation technique for chromate-containing epoxy primers coatings.

36 MATERIALS SCIENCE↗

Surface water nitrogen and sediment potential nitrate reduction rates, nutrient stocks, and stable isotopes from nine wetlands at the Tanglewood Biological Station, Alabama

This dataset supports a broader study investigating wetland hydrologic and biogeochemical responses to inundation disturbances. Bimonthly surface water and sediment sampling events were conducted at nine wetland sites situated within the Tanglewood Biological Station in Alabama from April 2023 to February 2024. The contents included in the data package include surface water nitrogen (nitrogen oxides and ammonium) and sediment potential nitrate reduction rates (measured as potential denitrification and dissimilatory nitrate reduction to ammonium processing), nutrient stocks (total carbon, total nitrogen, and organic matter), and stable isotopes (carbon and nitrogen). Water level data related to each wetland location can be found at https://data.ess-dive.lbl.gov/view/doi:10.15485/2530253 (Kirker et al., 2024) and related water geochemistry data can be found at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/3001967 (Forbes et al., 2025). In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. This dataset is comprised of (1) file-level metadata; (2) data dictionary; (3) field metadata and international generic sample numbers (IGSNs); (4) readme; (5) the field protocol; and (6) a subfolder with sample data. The sample data subfolder contains (1) sediment potential denitrification rate, (2) sediment potential dissimilatory nitrate reduction to ammonium (DNRA) rate, (3) sediment total carbon and nitrogen content, (4) sediment stable isotopes (delta nitrogen-15 and delta carbon-13), (5) sediment percent organic matter, (6) surface water nitrous oxides, (7) surface water ammonium, and (8) methods codes. All files are .csv or .pdf.

Ammonium↗

Computationally Tractable High-Fidelity Representation of Global Hydrology in ESMs via Machine Learning Approaches to Scale-Bridging

Focal Areas: This paper responds primarily to Focal Area 2, focusing on AI techniques to improve model fidelity. Science Challenge: “Hyperresolution” [1, 2] land surface models (LSMs) running at far higher resolution than typically employed in global Earth system models (ESMs) can help answer critical questions about the water cycle and associated ecosystem and biogeochemical feedbacks. Even with all foreseeable advances in computing power and efficient solver algorithms, however, employing hyperresolution LSMs inside ESMs for studies of long-term global climate is not computationally feasible. Instead, we argue for incorporating the fidelity of hyperresolution LSMs only where and when it is needed by using machine learning approaches to scale-bridging.

54 ENVIRONMENTAL SCIENCES↗

Simulations of the surfaces of soda lime aluminoborosilicate glasses exposed to water

Molecular dynamics simulations of 7 compositionally different sodium calcium alumino–borosilicate glasses showed formation of 4 B and 5 Al more consistent with experimental data without compromising the other structural features that match experimental results observed in recent simulations of these glasses. Analysis of the dry surfaces of these glasses show a lack of 4 B in the top 5–6 Å of the surface in comparison to the bulk concentration for all glasses and no 5 Al. Upon exposure to water, the simulations show that the 3 B in the top 5–6 Å of the glasses are preferentially attacked, decreasing the number of B bonds to O originally from the glass, indicating a change in the glass network. Inclusion of all B–O bonds in the top 5–6 Å (i.e., including O from water) shows a decrease in 3 B but an increase in 4 B that is consistent with NEXAFS analysis, which the simulations show are hydroxylated. Furthermore, there is an increase in the concentration of 3 Al in the dry surface in comparison to the bulk, but exposure to water converts almost all of these 3 Al to 4 Al. Hydroxyl concentrations vary from 2.6/nm 2 to 4.1/nm 2 , with SiOH and BOH dominating these surface hydroxyls. Upon exposure to water, network linkages to B are preferentially ruptured. This, and the preferential loss of the nonbridging oxygen sites attached to Na, provide atomistic evidence of the initial stages of removal of B and Na from glass surfaces exposed to water.

36 MATERIALS SCIENCE↗

Power Requirements for The NASA Mars Design Reference Architecture (DRA) 5.0

This paper summarizes the power systems analysis results from NASA s recent Mars DRA 5.0 study which examined three architecture options and resulting mission requirements for a human Mars landing mission in the post-2030 timeframe. DRA 5.0 features a long approximately 500 day surface stay split mission using separate cargo and crewed Mars transfer vehicles. Two cargo flights, utilizing minimum energy trajectories, pre-deploy a cargo lander to the surface and a habitat lander into a 24-hour elliptical Mars parking orbit where it remains until the arrival of the crew during the next mission opportunity approximately 26 months later. The pre-deployment of cargo poses unique challenges for set-up and emplacement of surface assets that results in the need for self or robotically deployed designs. Three surface architecture options were evaluated for breadth of science content, extent of exploration range/capability and variations in system concepts and technology. This paper describes the power requirements for the surface operations of the three mission options, power system analyses including discussion of the nuclear fission, solar photovoltaic and radioisotope concepts for main base power and long range mobility.

Cataldo, Robert L.↗