Search NASA⌕ Search

SEARCH · Search NASA

Results for “BALLISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Evaluation of candidate metals in a simulated space shuttle main engine environment for application as turbine blade dampers

The high-pressure pumps for the space shuttle main engine are driven by combustion products which are 50 percent H2 and 50 percent H2O (by weight). The Haynes alloy 188, used in the dampers, experienced erosion. The erosion producing characteristics of wet H2 were evaluated using a controlled environment produced by a ballistic compressor. Four candidate materials were evaluated: H-188, A-286, Pt/Rh and Rh. Rh was clearly the most erosion resistant. Comparisons with AISI 4340 and Fe specimens of known uniformity indicate that metallurgical defects in the candidate materials are primary contributors to the higher than usual erosion.

Caveny, L. H.↗

Conference on Helicopter Structures Technology, Moffett Field, Calif., November 16-18, 1977, Proceedings

Work on advanced concepts for helicopter designs is reported. Emphasis is on use of advanced composites, damage-tolerant design, and load calculations. Topics covered include structural design flight maneuver loads using PDP-10 flight dynamics model, use of 3-D finite element analysis in design of helicopter mechanical components, damage-tolerant design of the YUH-61A main rotor system, survivability of helicopters to rotor blade ballistic damage, development of a multitubular spar composite main rotor blade, and a bearingless main rotor structural design approach using advanced composites.

Source record↗

Performance comparison of earth and space storable bipropellant systems in interplanetary missions

The paper evaluates and compares the performance of earth-storable and space-storable liquid bipropellant propulsion systems in high-energy planetary mission applications, including specifically Saturn and Mercury orbiters, as well as asteroid and comet rendezvous missions. The discussion covers a brief review of the status of space-storable propulsion technology, along with an illustrative propulsion module design for a three-axis stabilized outer planet and cometary mission spacecraft of the Mariner class. The results take revised Shuttle/Upper Stage performance projections into account. It is shown that in some of the missions the performance improvement achievable in the ballistic transfer mode with space-storable spacecraft propulsion can provide a possible alternative to the use of solar-electric propulsion.

Meissinger, H. F.↗

Determination of effective aerodynamic characteristics for entry of External Tank /Space Shuttle/ debris

The effective aerodynamic characteristics for the debris resulting from the Space Shuttle External Tank (ET) are required for estimating the impact points of the debris. The paper develops a methodology that determines the effective values of the aerodynamic parameters required for performing the less complex three-degree-of-freedom (DOF) debris impact analyses. For all of the debris types, 6-DOF mass property and aerodynamic data are computed. From many 6-DOF trajectory simulations, standard deviation range values are calculated. With 3-DOF trajectory matching, these range values are used to determine the effective ballistic coefficient and the range of lift-to-drag ratios for each of the ET debris types defined.

Bonson, S. P.↗

The solar power satellite concept - The past decade and the next decade

Results of studies on the solar power satellite concept, currently under evaluation by NASA and the Department of Energy, are summarized. The basic advantages provided by the concept are the near-continuous access to sunlight and the freedom from atmospheric effects and cloud cover. The systems definition studies have considered photovoltaic and thermal energy conversion systems and found both to be technically feasible, with the photovoltaic approach being currently preferred. A microwave test program is under way which will provide quantitative data on critical parameters, including beam forming and steering accuracy. Ballistic and winged launch vehicles have been defined for the transportation of construction materials, with the Shuttle expected to provide low-cost transportation to and from space. A reference system has been outlined for evaluating the concept in terms of environmental and other considerations. Preliminary estimates of natural resource requirements and energy payback intervals are encouraging.

Kraft, C. C., Jr.↗

Wind-tunnel studies of the effects of simulated damage on the aerodynamic characteristics of airplanes and missiles

In order to assess the effects on static aerodynamic characteristics of battle damage to an aircraft or missile, wind tunnel studies were performed on models from which all or parts of the wing or horizontal or vertical tail had been removed. The effects of damage on the lift, longitudinal stability, lateral stability and directional stability of a swept-wing fighter are presented, along with the effects of wing removal on the control requirements of a delta-wing fighter. Results indicate that the loss of a major part of the vertical tail will probably result in the loss of the aircraft at any speed, while the loss of major parts of the horizontal tail generally results in catastrophic instability at subsonic speeds but, at low supersonic speeds, may allow the aircraft to return to friendly territory before pilot ejection. Major damage to the wing may be sustained without the loss of aircraft or pilot. The loss of some of the aerodynamic surfaces of cruise or surface-to-air missiles may result in catastrophic instability or may permit a ballistic trajectory to be maintained, depending upon the location of the lost surface with respect to the center of gravity of the missile.

Spearman, M. L.↗

Configuration considerations in the design of earth-to-orbit transports

The various configuration options for earth-to-orbit transports are discussed with specific attention given to: ballistic vs. winged vehicles; horizontal takeoff vs. vertical takeoff; two stage vs. single stage; rocket propulsion system options; structure and thermal protection systems options; and weight growth vs. size. It is suggested that the single-stage system has many attractive features such as the elimination of booster-to-orbiter mating problems and the elimination of the need for the development of a cruise system. From the standpoint of weight reduction, it appears desirable to combine as many functions as possible in the outer shell of the transport system.

Macconochie, I. O.↗

Monte Carlo analysis of satellite debris footprint dispersion

A comprehensive study is performed to investigate satellite debris impact point dispersion using a combination of Monte Carlo statistical analysis and parametric methods. The Monte Carlo technique accounts for nonlinearities in the entry point dispersion, which is represented by a covariance matrix of position and velocity errors. Because downrange distance of impact is a monotonic function of debris ballistic coefficient, a parametric method is useful for determining dispersion boundaries. The scheme is applied in the present analysis to estimate the Skylab footprint dispersions for a controlled reentry. A significant increase in the footprint dispersion is noticed for satellite breakup above a 200,000-ft altitude. A general discussion of the method used for analysis is presented together with some typical results obtained for the Skylab deboost mission, which was designed before NASA abandoned plans for a Skylab controlled reentry.

Rao, P. P.↗

Solid Rocket Motor Technology

These Conference Proceedings contain the 36 papers presented at the AGARD Propulsion and Energetics Panel 53rd Symposium on "Solid Rocket Motor Technology", which was held in Oslo, Norway, 2-5 April 1979. The questions and answers after the various presentations are included as well as the Round Table Discussion. The Symposium was organized into seven sessions: Survey Papers (2); Ignition, Extinction and Internal Ballistics (8); Burn Rate Modelling and Combustion of Metal (5); New Propellants (5); Combustion Instability (7); Heat Transfer and Materials (3); and Testing and Instrumentation (6).The Symposium provided a forum for discussion and exchange between research scientists ,propellant formulators and motor technologists. Though main emphasis was placed on transient processes like ignition and extinction and on combustion instability with the various related aspects there were a number of papers dealing with propellants, their characteristics and their development. Whether the symposium achieved its initial aim, i.e. furnishing a comprehensive survey of the technology available for solid propellant rocket motors and its further development capabilities, will be assessed in a Technical Evaluation Report, to be published as AGARD Advisory Report AR 151.

Advisory Group for Aerospace Research and Developm↗

Development of silicon nitride of improved toughness

The application of reaction sintered Si2N4 energy absorbing surface layers to hot-pressed Si3N4 was investigated. The surface layer was formed by in-place nitridation of silicon powder. It was found that reaction sintered Si3N4 layers of 1 mm thickness, fabricated from either -100, +200, -200, or -325 mesh Si powder and nitrided in 96% N2/4% H2 so that approximately 20-25 vol % unnitrided Si remained in the layer, resulted in a sevenfold increase in ballistic impact resistance of a 0.64 cm thick hot-pressed SI3N4 substrate from RT 1370 C. Both NC-132 SI3N4, with MgO additive, and NCX-34 Si3N4, with Y2O3 additive, were evaluated as substrate material. The finer grain size -200 and -325 mesh nitrided Si layers were for their smoothness and relatively high density. It was found that nitriding in N2/H2 mixtures, rather than pure N2, resulted in a microstructure that did not substantially degrade the strength of the hot-pressed Si3N4 substrate. Thermal cycling tests on the RSSN/HPSN combinations from 200 C to 1370 C for 75 cycles in air did not degrade the impact resistance nor the interfacial bonding, although a large amount of internal silica formation occurred within the RSSN layer. Mach 0.8, 5 hr, hot gas erosion tests showed no surface recession of RSSN layers at 1200 C and slight surface recession at 1370 C.

Brennan, J. J.↗

Feasibility of SiC composite structures for 1644 deg gas turbine seal applications

The feasibility of silicon carbide composite structures was evaluated for 1644 K gas turbine seal applications. The silicon carbide composites evaluated consisted of Si/SiC Silcomp (Trademark) - and sintered silicon carbide as substrates, both with attached surface layers containing BN as an additive. A total of twenty-eight candidates with variations in substrate type and density, and layer chemistry, density, microstructure, and thickness were evaluated for abradability, cold particle erosion resistance, static oxidation resistance, ballistic impact resistance, and fabricability. The BN-free layers with variations in density and pore size were later added for evaluation. The most promising candidates were evaluated for Mach 1.0 gas oxidation/erosion resistance from 1477 K to 1644 K. The as-fabricated rub layers did not perform satisfactorily in the gas oxidation/erosion tests. However, preoxidation was found to be beneficial in improving the hot gas erosion resistance. Overall, the laboratory and rig test evaluations show that material properties are suitable for 1477 K gas turbine seal applications.

Darolia, R.↗

The solar power satellite concepts: The past decade and the next decade

Results of studies on the solar power satellite concept are summarized. The basic advantages are near continuous access to sunlight and freedom from atmospheric effects and cloud cover. The systems definition studies consider photovoltaic and thermal energy conversion systems and find both to be technically feasible, with the photovoltaic approach preferred. A microwave test program is under way which will provide quantitative data on critical parameters, including beam forming and steering accuracy. Ballistic and winged launch vehicles are defined for the transportation of construction materials, with the shuttle expected to provide low cost transportation to and from space. A reference system is outlined for evaluating the concept in terms of environmental and other considerations. Preliminary estimates of natural resource requirements and energy payback intervals are encouraging.

Kraft, C. C., Jr.↗

Problems and strategy of the first flight to the comets

Substantiation is given for the urgency of using space equipment to study comets in order to work out the basic problem of the origin and evolution of the solar system. The potentialities and advantages of selecting ballistically-accessible objects among the newly discovered comets are shown (as a preliminary study). The technique of early detection of such objects is discussed.

Davydov, V. D.↗

Silicone containing solid propellant

The addition of a small amount, for example 1% by weight, of a liquid silicone oil to a metal containing solid rocket propellant provides a significant reduction in heat transfer to the inert nozzle walls. Metal oxide slag collection and blockage of the nozzle are eliminated and the burning rate is increased by about 5% to 10% thus improving ballistic performance.

Ramohalli, K. N. R.↗

Halley's comet 1985-86: space exploration

A coordinated program to explore Halley's comet in 1985 to 86 is proposed. The program employs a variety of observational systems for remote observations and utilizes spacecraft encounters with the comet to obtain in-situ measurements. Included in the observational network are groundbased observatories, the Space Telescope, a Spacelab cometary observatory, small astronomical satellites, and experiments carried on airborne observatories and sounding rockets. It is assumed that a ballistic flythrough technique will be used to carry out the spacecraft encounters. The proposed strategy calls for the simultaneous launch of two spacecraft towards an intercept with Halley in March 1986. Following the Halley encounter one spacecraft is retargeted to intercept comet Borrelly in January 1988, while the other spacecraft proceeds to an encounter with comet Tempel 2 in September 1988.

Farquhar, R. W.↗

The ion drive program - Comet rendezvous issues for SEPS developers

Preliminary steps have been taken in a joint high-priority project between NASA and the European Space Agency, whereby a Solar Electric Propulsion System (SEPS), using ion drive of a 25-30 kilowatt power level, will be utilized for the first time, as part of the Space Transportation System, in powering a probe to be deployed toward Halley's comet in 1985 and a separate spacecraft which will rendezvous with the Temple 2 comet in 1988 and study it for one year. Unlike ballistically-launched vehicles, an unprecedented long-term interaction between the SEPS, the primary source of power and attitude control, and the spacecraft, responsible for data handling (at a rate of 10-120 kilobits per second), and command and telecommunications to earth (requiring capabilities at both X- and S-band frequencies, for dual-frequency navigational tracking), is required, as mission phases alternate between powered flight and science data-taking. Different design sensitivities are presented graphically.

Atkins, K. L.↗

Uranus mission options

Options for delivery of Uranus payloads are covered extensively. Launch energy charts are supplied for ballistic trajectories to Uranus for direct, Jupiter gravity-assist, and Saturn gravity-assist missions launching from 1982 to 1995. Both early reconnaissance (flyby) and orbiter missions are considered. Performance charts for low-thrust, Delta Vega, planetary gravity-assist, and combinations of these modes are plotted in terms of net orbited mass and trip time to Uranus. Discussion and illustration of the effects of the unique Uranus system oritentation on Uranus encounter geometry with trajectory arrival date is covered. Example mission designs are characterized for several delivery modes.

Wallace, R. A.↗

Space Shuttle solid rocket motor /SRM/ development and qualification

The configuration of the reusable Space Shuttle solid rocket motors is described. In addition, their design evolution is reviewed, noting that the requirement that certain components be recovered, refurbished, and used on as many as 20 flights dictated a conservative design approach, the validity of which has been proven by successful testing of all development and qualification motors. Aspects discussed include ballistics, the motor case, nozzle, nozzle materials, and the ignition system. Finally, summary results of the first two of three qualification motor firings designated QM-1 and QM-2 are presented.

Lund, R. K.↗