Search NASA⌕ Search

SEARCH · Search NASA

Results for “BASE PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Integration of a supersonic unsteady aerodynamic code into the NASA FASTEX system

A supersonic unsteady aerodynamic loads prediction method based on the constant pressure method was integrated into the NASA FASTEX system. The updated FASTEX code can be employed for aeroelastic analyses in subsonic and supersonic flow regimes. A brief description of the supersonic constant pressure panel method, as applied to lifting surfaces and body configurations, is followed by a documentation of updates required to incorporate this method in the FASTEX code. Test cases showing correlations of predicted pressure distributions, flutter solutions, and stability derivatives with available data are reported.

Appa, Kari↗

Numerical simulation of pressure oscillations in a ramjet combustor

Large-eddy simulations of compressible cold flow in a ramjet combustor configuration were performed. The objectives were to investigate the mechanisms for vortex-acoustic interaction in such a device and to develop a simulation method that can be extended to cases with combustion heat release to study combustion instability. From the simulation, it was found that the separated shear layer rolls up into concentrated vortices that merge to form large coherent structures. These vortices interact with the choked nozzle downstream to produce an axial acoustic dipole. The spectrum of the pressure fluctuation at the base of the backward-facing step shows that there are two types of oscillations: an acoustic resonant mode and a vortex-acoustic coupled mode. Based on the flow physics observed in the simulations, a simple one-dimensional model for the vortex-acoustic coupled mode was proposed. The eigenvalue problem based on this model was solved to obtain the frequency of the coupled mode.

Jou, Wen-Huei↗

Preliminary results from a subsonic high angle-of-attack flush airdata sensing (HI-FADS) system: Design, calibration, and flight test evaluation

A nonintrusive high angle-of-attack flush airdata sensing (HI-FADS) system was installed and flight-tested on the F-18 high alpha research flight vehicle. The system is a matrix of 25 pressure orifices in concentric circles on the nose of the vehicle. The orifices determine angles of attack and sideslip, Mach number, and pressure altitude. Pressure was transmitted from the orifices to an electronically scanned pressure module by lines of pneumatic tubing. The HI-FADS system was calibrated and demonstrated using dutch roll flight maneuvers covering large Mach, angle-of-attack, and sideslip ranges. Reference airdata for system calibration were generated by a minimum variance estimation technique blending measurements from two wingtip airdata booms with inertial velocities, aircraft angular rates and attitudes, precision radar tracking, and meteorological analyses. The pressure orifice calibration was based on identifying empirical adjustments to modified Newtonian flow on a hemisphere. Calibration results are presented. Flight test results used all 25 orifices or used a subset of 9 orifices. Under moderate maneuvering conditions, the HI-FADS system gave excellent results over the entire subsonic Mach number range up to 55 deg angle of attack. The internal pneumatic frequency response of the system is accurate to beyond 10 Hz. Aerodynamic lags in the aircraft flow field caused some performance degradation during heavy maneuvering.

Whitmore, Stephen A.↗

Experimental investigation of terminal shock sensors in mixed-compression inlets

This paper describes experimental investigations of devices designed for the nonintrusive detection of terminal shock location in mixed-compression inlets at high supersonic flight speeds. Systems based on sensing wall pressures by an array of wall-mounted transducers were selected for detailed study. Pressure signals were processed by three different methods: (1) interpretation of instantaneous pressure distributions, (2) detection of the turbulent intensity amplification occurring at the shock, and (3) determination of the upstream limit to which a search-tone, introduced at the downstream end of the channel, can propagate. The first two of these methods were tested in real time. The third method appeared feasible for weak shocks only; at high shock strengths, propagation upstream of the source could not be detected.

Sajben, Miklos↗

A numerical method for relating two- and three-dimensional pressure distributions on transonic wings

This paper presents a preliminary design method for determining a wing's design pressure distribution and geometry based on airfoil normal Mach numbers and airfoil loading. In this method, the perturbation velocities in supercritical regions are computed from airfoil transonic normal Mach numbers and include the influence of local sweep, taper, and three-dimensional induced velocities, so that the appearance and strength of shocks can be expected to resemble those of the airfoil. The velocities in subcritical wing regions are scaled first with simple sweep theory, and then to achieve the desired load distribution. The method was applied to the design of an oblique flying wing, using a linear potential method. The required wing area could be reduced by 14 percent using this method rather than simple sweep theory.

Kroo, Ilan↗

Estimating Liquid And Gas Contents In A Tank

General approach to estimation of amounts of liquid and gas in tank based on measurements of pressure perturbations and temperatures and use of thermodynamic relationships among pressures, temperatures, and volumes. Although approach approximate and indirect, advantageous where such direct and precise methods as observation of stationary liquid/gas interface in gravitational field cannot be used. Used in presence or absence of gravitation or acceleration, and regardless of numbers, shapes, and movements of liquid/gas interfaces in tank. Also useful where liquid stationary but too hazardous to permit direct observation. Implemented in variety of ways, depending on type of liquid and conditions of operation and design of tank system.

Walter, Richard T.↗

Natural laminar flow application to transport aircraft

A major goal of NASA during the last 15 years has been the development of laminar flow technology for aircraft drag reduction. Of equal importance is achieving a state of readiness that will allow the successful application of this technology by industry to large, long-range aircraft. Recent progress in achieving extensive laminar flow with limited suction on the Boeing 757 has raised the prospects from practical application of the hybrid laminar flow control (HLFC) concept to subsonic aircraft. Also, better understanding of phenomena affecting laminar flow stability and response to disturbances has encouraged consideration of natural laminar flow (NLF), obtained without suction or active mechanical means, for application to transport aircraft larger than previously thought feasible. These ideas have inspired the current NASA/ASEE project with goals as follows: explore the feasibility of extensive NLF for aircraft at high Reynolds number under realistic flight conditions; determine the potential applications of NLF technology and the conditions under which they may be achieved; and identify existing aircraft that could be adapted to carry out flight experiments to validate NLF technology application. To achieve these objectives, understanding of the physical limits to natural laminar flow and possible ways to extend these limits was sought. The primary factors involved are unit Reynolds number, Mach number, wing sweep, thickness, and lift coefficients as well as surface pressure gradients and curvature. Based on previous and ongoing studies using laminar boundary layer stability theory, the interplay of the above factors and the corresponding transition limits were postulated.

Gratzer, Louis B.↗

A novel gas-droplet numerical method for spray combustion

This paper presents a non-iterative numerical technique for computing time-dependent gas-droplet flows. The method is a fully-interacting combination of Eulerian fluid and Lagrangian particle calculation. The interaction calculations between the two phases are formulated on a pressure-velocity coupling procedure based on the operator-splitting technique. This procedure eliminates the global iterations required in the conventional particle-source-in-cell (PSIC) procedure. Turbulent dispersion calculations are treated by a stochastic procedure. Numerical calculations and comparisons with available experimental data, as well as efficiency assessments are given for some sprays typical of spray combustion applications.

Chen, C. P.↗

Prediction of cascade performance using an incompressible Navier-Stokes technique

A fully elliptic, control volume solution of the two-dimensional incompressible Navier-Stokes equations for the prediction of cascade performance over a wide incidence range is presented. The numerical technique is based on a new pressure substitution method. A Poisson equation is derived from the pressure weighted substitution of the full momentum equations into the continuity equation. The analysis of a double circular arc compressor cascade is presented, and the results are compared with the available experimental data at various incidence angles. Good agreement is obtained for the blade pressure distribution, boundary layer and wake profiles, skin friction coefficient, losses and outlet angles. Turbulence effects are simulated by the Low-Reynolds-Number version of the k-epsilon turbulence model.

Hobson, G. V.↗

The Energetic Transient Array ETA - A network of 'space buoys' in solar orbit for observations of gamma-ray bursts

The Energetic Transient Array (ETA) is a concept for a dedicated interplanetary network of about 40 microsatellites ('space buoys') deployed in an about 1 AU radius solar orbit for the observation of cosmic gamma ray bursts (GRBs). Such a network is essential for the determination of highly accurate (about 0.1 arcsec) error boxes for GRBs. For each of about 100 bursts which would be detectable per year of observation by such a network, high resolution spectra could be obtained through the use of passively-cooled Ge gamma-ray detectors. Stabilization of each microsatellite would be achieved by a novel technique based on the radiation pressure exerted on 'featherable' solar paddles. It should be possible to have a fully functional array of satellites in place before the end of the decade for a total cost of about $20M, exclusive of launcher fees.

Ricker, George R.↗

Support activities to maintain SUMS flight readiness

The Shuttle Upper Atmosphere Mass Spectrometer (SUMS), a component experiment of the NASA Orbital Experiments Program (OEX), was flown aboard the shuttle Columbia (OV102) mounted at the forward end of the nose landing gear well with an atmospheric gas inlet system fitted to the lower fuselage (chin panel) surface. The SUMS was designed to provide atmospheric data in flow regimes inaccessible prior to the development of the Space Transportation System (STS). The experiment mission operation began about one hour prior to shuttle de-orbit entry maneuver and continued until reaching 1.6 torr (about 86 km altitude). The SUMS mass spectrometer consists of the spare unit from the Viking mission to Mars. Bendix Aerospace under contract to NASA LaRC incorporated the Viking mass spectrometer, a microprocessor based logic card, a pressurized instrument case, and the University of Texas at Dallas provided a gas inlet system into a configuration suited to interface with the shuttle Columbia. The SUMS experiment underwent static and dynamic calibration as well as vacuum maintenance before and after STS 40 shuttle flight. The SUMS flew a total of 3 times on the space shuttle Columbia. Between flights the SUMS was maintained in flight ready status. The flight data has been analyzed by the NASA LaRC Aerothermodynamics Branch. Flight data spectrum plots and reports are presented in the Appendices to the Final Technical Report for NAS1-17399.

Wright, Willie↗

An efficient pressure-velocity procedure for gas-droplet two-phase flow calculations

This paper presents a noniterative numerical technique for computing time-dependent gas-droplet flows. The method is a fully interacting combination of Eulerian fluid and Lagrangian particle calculations. The interaction calculations between the two phases are formulated on a pressure-velocity-coupling procedure based on the operator-splitting technique. This procedure eliminates the global iterations required in the conventional particle-source-in-cell procedure. Turbulent dispersion calculations are treated by a stochastic procedure. Numerical calculations and comparisons with available experimental data as well as efficiency assessments are given for some sprays typical of spray combustion applications.

Chen, C. P.↗

The effects of Venusian mantle convection with multiple phase transitions

Recently there was a flurry of activities in studying the effects of phase transitions in the Earth's mantle. From petrological and geophysical considerations, phase-transitions would also play an important role in venusian dynamics. The basic differences between the two planets are the surface boundary conditions, both thermally and mechanically. In this vein we have studied time-dependent mantle convection with multiple phase transitions and depth-dependent thermal expansivity (alpha is approximately rho(exp -6)), based on high-pressure and temperature measurements. Both the olivine-spinel and spinel-perovskite transitions were simulated by introducing an effective thermal expansivity, as described. Used together with the extended Boussinesq Approximation this method serves as a powerful tool to examine the effects of phase transitions on convection at relatively low computational costs.

Steinbach, V.↗

Model for the formation of silicon carbide from the pyrolysis of dichlorodimethylsilane in hydrogen. I - Silicon formation from chlorosilanes. II - Silicon carbide formation from silicon and methane

In the first part of this work, a model is developed for the deposition of silicon from the reduction of silicon tetrachloride with hydrogen in a tubular reactor at 700-1100 C, at atmospheric pressure. The model is based on gas chromatography of the volatile products of the reaction, followed by gravimetric analysis of total Si deposition on the tube. In the second part of this work, a model is developed for the case of SiC deposition from the pyrolysis of dichlorodimethylsilane in hydrogen under the same reactor conditions. The rate constants derived from a nonlinear regression analysis are reported.

Cagliostro, Domenick E.↗

The scientific objectives of the Atlas-1 Shuttle mission

Six remote sensing atmospheric instruments aboard the 9-day Atlas-1 Space Shuttle mission covered an unprecedented spectrum of regions in the 15-300 km altitude range, yielding a unique data base for the temperature, pressure, and compositions found therein. In addition, experiments were conducted in space plasma physics, which included aurora-induction for photometric imaging camera observations. Measurements were also made of the precipitation of energetic neutrals from the ring current.

Torr, Marsha R.↗

Numerical vorticity capturing for vortex-solid body interaction problems

A new numerical method based on adding a term to the Euler/Navier-Stokes equations has been demonstrated it can effectively treat vortex-dominated flows using low-order numerical schemes and coarse grids. The numerical diffusion introduced by convection schemes can be eliminated by modifying the velocity field as a result of solving the modified flow governing equations. The modification of the velocity field, which conserves the total vorticity, essentially convects the vorticity toward its local extreme to offset the numerical diffusion. This method preserves the vortex structure even when vortices travel on coarse grid region. The method is implemented with two distinctive codes: a Navier-Stokes flow solver based on vorticity-velocity formulation and an Euler code based on velocity-pressure formulation. Problems presented in this paper include airfoil dynamic stall, vortex airfoil interaction, and vortex-fuselage interactions.

Wang, Clin M.↗

Standard atmosphere

This report was prepared at the request of the National Advisory Committee for Aeronautics and discusses the need of a standard set of values of pressure, temperature and density at various altitudes and points out the desirability of adopting such values as are most in accord with actual average conditions, in order that corrections in individual cases may be as small as possible. To meet this need, so far as the united states is concerned, all free-air observations obtained by means of kites and balloons at several stations in this country near latitude 40 degrees N., have been used, and average values of pressure, temperature, and density, based upon those observations, have been determined for summer, winter, and the year, and for all altitudes up to 20,000 meters (65,000 feet). These values are presented in tables and graphs in both metric and english units; and in the tables of densities there are also included values of density for other parts of the world, more particularly for Europe. A comparison with these values shows that, except in the lowest levels, the agreement is very satisfactory.

Gregg, Willis Ray↗