Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Development and performance evaluation of an electromagnetic-type shock wave generator for lipolysis

This study aims at the design and development of electromagnetic-type intermittent shock wave generation in a liquid. The shock wave generated is focused at a focal point through an acoustic lens. This hardware device mainly consists of a full-wave bridge rectifier, 6 capacitors, a spark gap, and a flat coil. A metal disk is mounted in a liquid-filled tube and is placed in close proximity to the flat coil. Due to the repulsive force existing between the coil and disk shock waves are generated, while an eddy current is induced in the metal disk. Some components and materials associated with the device are also described. By increasing the capacitance content to enhance electric energy level, a highly focused pressure can be achieved at the focal point through an acoustic lens in order to lyse fat tissue. Focused pressures were measured at the focal point and its vicinity for different operation voltages. The designed shock wave generator with an energy intensity of 0.0016 mJ/mm{sup 2} (at 4 kV) and 2000 firings or higher energy intensities with 1000 firings is found to be able to disrupt pig fat tissue.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effects of sodium ions on trapping and transport of electrons at the SiO{sub 2}/4H-SiC interface

Capacitance-voltage (C-V) and Deep-Level-Transient Spectroscopy (DLTS) measurements were performed on Metal-Oxide-Semiconductor (MOS) capacitors fabricated on 4H-SiC with the SiO{sub 2} layer grown by Sodium-Enhanced Oxidation. This technique has yielded 4H-SiC MOS transistors with record channel mobility, although with poor bias stability. The effects of the mobile positive charge on the C-V characteristics and DLTS spectra were investigated by applying a sequence of positive and negative bias-temperature stresses, which drifted the sodium ions toward and away from the SiO{sub 2}/4H-SiC interface, respectively. Analytical modeling of the C-V curves shows that the drift of sodium ions in the SiO{sub 2} layer during the voltage sweep can explain the temperature dependence of the C-V curves. The effects of lateral fluctuations of the surface potential (due to a non-uniform charge distribution) on the inversion layer mobility of MOS transistors are discussed within a two-dimensional percolation model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Current transport and thermoelectric properties of very high power factor Fe{sub 3}O{sub 4}/SiO{sub 2}/p-type Si(001) devices

The current transport and thermoelectric properties of Fe{sub 3}O{sub 4}/SiO{sub 2}/p-type Si(001) heterostructures with Fe{sub 3}O{sub 4} thicknesses of 150, 200, and 350 nm have been investigated between 100 and 300 K. We observe a sharp drop of the in-plane resistivity at 200 K due to the onset of conduction along the Si/SiO{sub 2} interface related to tunneling of electrons from the Fe{sub 3}O{sub 4} into the accumulation layer of holes at the Si/SiO{sub 2} interface, whose existence was confirmed by capacitance-voltage measurements and a two band analysis of the Hall effect. This is accompanied by a large increase of the Seebeck coefficient reaching +1000 μV/K at 300 K that is related to holes in the p-type Si(001) and gives a power factor of 70 mW/K{sup 2}m when the Fe{sub 3}O{sub 4} layer thickness is reduced down to 150 nm. We show that most of the current flows in the Fe{sub 3}O{sub 4} layer at 300 K, while the Fe{sub 3}O{sub 4}/SiO{sub 2}/p-type Si(001) heterostructures behave like tunneling p-n junctions in the transverse direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design, fabrication, and analysis of p-channel arsenide/antimonide hetero-junction tunnel transistors

In this paper, we demonstrate InAs/GaSb hetero-junction (hetJ) and GaSb homo-junction (homJ) p-channel tunneling field effect transistors (pTFET) employing a low temperature atomic layer deposited high-κ gate dielectric. HetJ pTFET exhibited drive current of 35 μA/μm in comparison to homJ pTFET, which exhibited drive current of 0.3 μA/μm at V{sub DS} = −0.5 V under DC biasing conditions. Additionally, with pulsing of 1 μs gate voltage, hetJ pTFET exhibited enhanced drive current of 85 μA/μm at V{sub DS} = −0.5 V, which is the highest reported in the category of III-V pTFET. Detailed device characterization was performed through analysis of the capacitance-voltage characteristics, pulsed current-voltage characteristics, and x-ray diffraction studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A bootstrapped, low-noise, and high-gain photodetector for shot noise measurement

We presented a low-noise, high-gain photodetector based on the bootstrap structure and the L-C (inductance and capacitance) combination. Electronic characteristics of the photodetector, including electronic noise, gain and frequency response, and dynamic range, were verified through a single-frequency Nd:YVO{sub 4} laser at 1064 nm with coherent output. The measured shot noise of 50 μW laser was 13 dB above the electronic noise at the analysis frequency of 2 MHz, and 10 dB at 3 MHz. And a maximum clearance of 28 dB at 2 MHz was achieved when 1.52 mW laser was illuminated. In addition, the photodetector showed excellent linearities for both DC and AC amplifications in the laser power range between 12.5 μW and 1.52 mW.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spatio-temporal characteristics of Trichel pulse at low pressure

Trichel pulses are investigated using a needle-to-plane electrode geometry at low pressure. The evolution of current and voltage, the spatio-temporal discharge images of Trichel pulse are measured. The rising time and duration time in a pulse are about 10 μs and several tens of microseconds, respectively. One period of pulse can be divided into three stages: the stage preceding cathode breakdown, cathode glow formation, and discharge decaying process. Besides a cathode glow and a dark space, an anode glow is also observed. The emission spectra mainly originate from the C{sup 3}Π{sub u} → B{sup 3}Π{sub g} transition for nitrogen. In addition, the capacitances in parallel connected with the discharge cell have important influence on the pulsing frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Note: Long-range scanning tunneling microscope for the study of nanostructures on insulating substrates

The scanning tunneling microscope (STM) is a powerful tool for studying the electronic properties at the atomic level, however, it is of relatively small scanning range and the fact that it can only operate on conducting samples prevents its application to study heterogeneous samples consisting of conducting and insulating regions. Here we present a long-range scanning tunneling microscope capable of detecting conducting micro and nanostructures on insulating substrates using a technique based on the capacitance between the tip and the sample and performing STM studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on negative incident photon-to-electron conversion efficiency of quantum dot-sensitized solar cells

Recently, negative signals are frequently observed during the measuring process of monochromatic incident photon-to-electron conversion efficiency (IPCE) for sensitized solar cells by DC method. This phenomenon is confusing and hindering the reasonable evaluation of solar cells. Here, cause of negative IPCE values is studied by taking quantum dot-sensitized solar cell (QDSC) as an example, and the accurate measurement method to avoid the negative value is suggested. The negative background signals of QDSC without illumination are found the direct cause of the negative IPCE values by DC method. Ambient noise, significant capacitance characteristics, and uncontrolled electrochemical reaction all can lead to the negative background signals. When the photocurrent response of device under monochromatic light illumination is relatively weak, the actual photocurrent signals will be covered by the negative background signals and the resulting IPCE values will appear negative. To improve the signal-to-noise ratio, quasi-AC method is proposed for IPCE measurement of solar cells with weak photocurrent response based on the idea of replacing the absolute values by the relative values.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The E3 center in zinc oxide: Evidence for involvement of hydrogen

Proton implantation is shown to increase the concentration of the so called and commonly observed E3 defect level in zinc oxide (ZnO). Box and single profiles of protons with doses ranging from 6×10{sup 10} cm{sup −2} to 4.3×10{sup 12} cm{sup −2} were implanted into hydrothermally grown ZnO samples with original concentrations of E3 below 5×10{sup 14} cm{sup −3}. Capacitance-Voltage profiling and junction spectroscopy measurements showed that the charge carrier concentration and absolute concentration of E3 centers increase by more than one order of magnitude compared to the as-grown samples as well as control samples implanted with He ions. The results provide strong evidence for the involvement of H in the formation of the E3 center, and a complex involving interstitial H and an oxygen sub-lattice primary defect are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental verification of effects of barrier dopings on the internal electric fields and the band structure in InGaN/GaN light emitting diodes

We experimentally clarify the effects of barrier dopings on the polarization induced electric fields and the band structure in InGaN/GaN blue light emitting diodes. Both effects were independently verified by using electric field modulated reflectance and capacitance-voltage measurement. It is shown that the Si barrier doping does reduce the polarization induced electric field in the quantum wells. But the benefit of Si-doping is nullified by modification of the band structure and depletion process. With increased number of doped barriers, smaller number of quantum wells remains in the depletion region at the onset of the diffusion process, which can reduce the effective active volume and enhance the electron overflow.

36 MATERIALS SCIENCE↗

Paper-based ultracapacitors with carbon nanotubes-graphene composites

In this paper, a paper-based ultracapacitors were fabricated by the rod-rolling method with the ink of carbon nanomaterials, which were synthesized by arc discharge under various magnetic conditions. Composites of carbon nanostructures, including high-purity single-walled carbon nanotubes (SWCNTs) and graphene flakes were synthesized simultaneously in a magnetically enhanced arc. These two nanostructures have promising electrical properties and synergistic effects in the application of ultracapacitors. Scanning electron microscope, transmission electron microscope, and Raman spectroscopy were employed to characterize the properties of carbon nanostructures and their thin films. The sheet resistance of the SWCNT and composite thin films was also evaluated by four-point probe from room temperature to the cryogenic temperature as low as 90 K. In addition, measurements of cyclic voltammetery and galvanostatic charging/discharging showed the ultracapacitor based on composites possessed a superior specific capacitance of up to 100 F/g, which is around three times higher than the ultracapacitor entirely fabricated with SWCNT.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Grain size effect on the giant dielectric constant of CaCu{sub 3}Ti{sub 4}O{sub 12} nanoceramics prepared by mechanosynthesis and spark plasma sintering

In the present work, CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) nanoceramics with different grain sizes were prepared by spark plasma sintering (SPS) at different temperatures (SPS-800, SPS-900, SPS-975, and SPS-1050) of the mechanosynthesized nano-powder. Structural and microstructural properties were studied by XRD and field-emission scanning electron microscope measurements. The grain size of CCTO nanoceramics increases from 80 nm to ∼200 nm for the ceramics sintered at 800 °C and 975 °C, respectively. Further increase of SPS temperature to 1050 °C leads to micro-sized ceramics of 2–3 μm. The electrical and dielectric properties of the investigated ceramics were studied by impedance spectroscopy. Giant dielectric constant was observed in CCTO nanoceramics. The dielectric constant increases with increasing the grain size of the nanoceramics with values of 8.3 × 10{sup 3}, 2.4 × 10{sup 4}, and 3.2 × 10{sup 4} for SPS-800, SPS-900, and SPS-975, respectively. For the micro-sized SPS-1050 ceramics, the dielectric constant dropped to 2.14 × 10{sup 4}. The dielectric behavior is interpreted within the internal barrier layer capacitance picture due to the electrical inhomogeneity of the ceramics. Besides the resistive grain boundaries that are usually observed in CCTO ceramics, domain boundaries appear as a second source of internal layers in the current nanoceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An ECT/ERT dual-modality sensor for oil-water two-phase flow measurement

This paper presents a new sensor for ECT/ERT dual-modality system which can simultaneously obtain the permittivity and conductivity of the materials in the pipeline. Quasi-static electromagnetic fields are produced by the inner electrodes array sensor of electrical capacitance tomography (ECT) system. The results of simulation show that the data of permittivity and conductivity can be simultaneously obtained from the same measurement electrode and the fusion of two kinds of data may improve the quality of the reconstructed images. For uniform oil-water mixtures, the performance of designed dual-modality sensor for measuring the various oil fractions has been tested on representative data and the results of experiments show that the designed sensor broadens the measurement range compared to single modality.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Transparent capacitors based on nanolaminate Al{sub 2}O{sub 3}/TiO{sub 2}/Al{sub 2}O{sub 3} with H{sub 2}O and O{sub 3} as oxidizers

Transparent capacitors with nanolaminate Al{sub 2}O{sub 3}/TiO{sub 2}/Al{sub 2}O{sub 3} (ATA) hybrid dielectrics have been prepared on quartz glass by atomic layer deposition. The maximal capacitance density of 14 fF/μm{sup 2} at 1 kHz was obtained. Moreover, an ultralow leakage current density of 2.1 × 10{sup −9} A/cm{sup 2} at 1 V was realized by using O{sub 3} as the oxidizer. Fowler-Nordheim tunneling is the main mechanism of the leakage current at high fields, while several conduction mechanisms coexist at low fields. The AlZnO/ATA/AlZnO transparent capacitors exhibit an average optical transmittance of more than 80% in the visible range, which serve as good candidates for integration in transparent circuits.

36 MATERIALS SCIENCE↗

Performance study of polycrystalline CVD diamond detectors for fast neutron monitoring

Diamond detectors using polycrystalline CVD diamond substrates of thickness 300μm and 100μm were fabricated for fast neutron monitoring application.. The characterization of detectors was carried out using various tests such as leakage current, capacitance and alpha particle response. The performance of detectors was evaluated for fast neutrons at different neutron yields. The results presented in this work demonstrate that the diamond detectors will be suitable for monitoring fast neutrons.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Energy band line-up of atomic layer deposited Al{sub 2}O{sub 3} on β-Ga{sub 2}O{sub 3}

Electrical properties of atomic layer deposited Al{sub 2}O{sub 3}/β-Ga{sub 2}O{sub 3} interface were investigated. We determined the conduction band offset and interface charge density of Al{sub 2}O{sub 3}/β-Ga{sub 2}O{sub 3} interface by analyzing the capacitance-voltage characteristics. The conduction band offset at the Al{sub 2}O{sub 3}/β-Ga{sub 2}O{sub 3} interface was found to be 1.7 eV. A large positive sheet charge density of 3.6 × 10{sup 12} cm{sup −2} is induced at the Al{sub 2}O{sub 3}/β-Ga{sub 2}O{sub 3} interface, which caused a non-zero field of 0.7 MV/cm in the Al{sub 2}O{sub 3} under flat-band conditions in the β-Ga{sub 2}O{sub 3}. The forward current-voltage characteristics were found to be related to trap-assisted tunneling.

36 MATERIALS SCIENCE↗

Simulation and characterization of millimeter-wave InAlN/GaN high electron mobility transistors using Lombardi mobility model

A gate length of 0.2 μm InAlN/GaN high electron mobility transistor on SiC substrate is obtained with a maximum current gain cutoff frequency (f{sub T}) of 65.8 GHz and a maximum power gain cutoff frequency (f{sub max}) of 143.6 GHz. Lombardi model, which takes interface roughness scattering into consideration, has been introduced to model the transconductance (g{sub m}) degradation. The simulated g{sub m} and f{sub T} with Lombardi model are 69% and 58% lower than the ones without considering interface roughness scattering, respectively. Further analysis show experimental g{sub m}, gate capacitance (C{sub g}), and f{sub T} are consistent with results based on Lombardi model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interaction of Sn atoms with defects introduced by ion implantation in Ge substrate

The interaction of Sn atoms with defects induced by Sn implantation of Ge substrates with antimony (Sb) as an n-type dopant and the impact of H{sub 2} annealing on these defects were investigated by comparison with defects induced by Ge self-implantation. In the Ge samples implanted with either Sn or Ge, and annealed at temperatures of less than 200 °C, divacancies, Sb-vacancy complexes with single or double acceptor-like states, and defects related to Sb and interstitial Ge atoms were present. On the other hand, after annealing at 500 °C in an N{sub 2} or H{sub 2} atmosphere, defects with different structures were observed in the Sn-implanted samples by deep level transition spectroscopy. The energy levels of the defects were 0.33 eV from the conduction band minimum and 0.55 eV from the valence band maximum. From the capacitance-voltage (C-V) characteristics, interaction between Sn atoms and defects after annealing at 500 °C was observed. The effect of H{sub 2} annealing at around 200 °C was observed in the C-V characteristics, which can be attributed to hydrogen passivation, and this effect was observed in both the Ge- and Sn-implanted samples. These results suggest the presence of defects that interact with Sn or hydrogen atoms. This indicates the possibility of defect control in Ge substrates by Sn or hydrogen incorporation. Such defect control could yield high-performance Ge-based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗