Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Efficient and bright white light-emitting diodes based on single-layer heterophase halide perovskites

At present, electric lighting accounts for ~15% of global power consumption and thus the adoption of efficient, low-cost lighting technologies is important. Here, halide perovskites have been shown to be good emitters of pure red, green and blue light, but an efficient source of broadband white electroluminescence suitable for lighting applications is desirable. Here, we report a white light-emitting diode (LED) strategy based on solution-processed heterophase halide perovskites that, unlike GaN white LEDs, feature only one broadband emissive layer and no phosphor. Our LEDs operate with a peak luminance of 12,200 cd m –2 at a bias of 6.6 V and a maximum external quantum efficiency of 6.5% at a current density of 8.3 mA cm –2 . Systematic in situ and ex situ characterizations reveal that the mechanism of efficient electroluminescence is charge injection into the α phase of CsPbI 3 , α to δ charge transfer and α–δ balanced radiative recombination. Future advances in fabrication technology and mechanistic understanding should lead to further improvements in device efficiency and luminance.

36 MATERIALS SCIENCE↗

Bright and stable light-emitting diodes made with perovskite nanocrystals stabilized in metal–organic frameworks

Perovskite nanocrystals are exceptional candidates for light-emitting diodes (LEDs). However, they are unstable in the solid film and tend to degrade back to the bulk phase, which undermines their potential for LEDs. Here we demonstrate that perovskite nanocrystals stabilized in metal–organic framework (MOF) thin films make bright and stable LEDs. The perovskite nanocrystals in MOF thin films can maintain the photoluminescence and electroluminescence against continuous ultraviolet irradiation, heat and electrical stress. As revealed by optical and X-ray spectroscopy, the strong emission originates from localized carrier recombination. Bright LEDs made from perovskite-MOF nanocrystals are demonstrated with a maximum external quantum efficiency of over 15% and a high brightness of over 10 5 cd m -2 after the device reaches stabilization. During LED operation, the nanocrystals can be well preserved, free of ion migration or crystal merging through protection by the MOF matrix, leading to a stable performance over 50 hours.

36 MATERIALS SCIENCE↗

Scintillation event imaging with a single photon avalanche diode camera

Position and time measurements of scintillation events encode information about the radiation source. Single photon avalanche diode (SPAD) arrays offer multiple-megapixel spatial resolution and tens of picoseconds temporal resolution for detecting single photons. Current lensless designs for measuring scintillation events use sensors that are lower in spatial resolution. Camera-based designs use sensors that are lower in temporal resolution or readout rate and cannot image individual interactions. Here we propose to image scintillation events in a thick, monolithic scintillator using a high-resolution SPAD camera. We demonstrate that a commercial SPAD camera is able to gather sufficient signal to image individual scintillation events and observe 3D shifts in their spatial distribution. Simulations show that a SPAD camera can localize individual scintillation events in 3D. We report direct imaging of gamma-ray interactions in a scintillator with a SPAD camera. The proposed design may allow to measure complex signatures of individual particles interacting in the scintillator.

47 OTHER INSTRUMENTATION↗

A New Class of Non-Conjugated Bipolar Hybrid Hosts for Phosphorescent Organic Light-Emitting Diodes

Comprising hole- and electron-transporting moieties with flexible linkages, representative non-conjugated bipolar hybrids have been synthesized and characterized for a demonstration of their potential use as host materials for the fabrication of phosphorescent organic light-emitting diodes. The advantages of this material class include solution processing into amorphous films with elevated glass transition temperatures, stability against phase separation and crystallization, and provision of LUMO/HOMO levels and triplet energies contributed by the two independent moieties without constraint by the electrochemical energy gap. While exciplex formation between the hole- and electron-transporting moieties is inevitable, its adverse effects on spectral purity and device efficiency can be avoided by trapping charges on triplet emitters, as demonstrated for Ir(mppy)3 in TRZ-3Cz(MP)2, and TRZ-1Cz(MP)2. With these two bipolar hybrids and hole-transporting Cz(MP)2 as the host, the maximum current efficiency of the bilayer PhOLED is achieved with TRZ-3Cz(MP)2, but the driving voltage decreases monotonically with an increasing TRZ content.

Zeng, L↗

Evaluation of propylene-, meta-, and para-linked triazine and tert-butyltriphenylamine as bipolar hosts for phosphorescent organic light-emitting diodes

Three representative bipolar hybrids - tBu-TPA-p-TRZ, tBu-TPA-m-TRZ, and tBu-TPA-L -TRZ with triplet energies, ET = 2.5, 2.7 and 3.0 eV, respectively - were synthesized and characterized for a comprehensive evaluation of their potential as a host for phosphorescent organic light-emitting diodes (PhOLEDs) using red-emitting Ir(piq)3 as the dopant with an ET value of 2.1 eV. Formation of charge transfer complexes, CTCs, was diagnosed by fluorescence bathochromism in increasingly polar solvents. Both intra- and inter-molecular charge transfer processes are invoked to explain CTC formation in all three hybrids. The p-hybrid is by far the most susceptible to CTC formation both in solution and neat solid film, resulting in PhOLEDs with reduced external quantum efficiency, EQE, despite the best balance between charge fluxes across the emitting layer, EML, as revealed by the electron- and hole-only devices in addition to PhOLEDs containing a sensing layer. The highest EQE is achieved with the m-hybrid thanks to the compromise between balanced charge fluxes and CTC formation. The L-hybrid is the least prone to CTC formation while suffering charge flux imbalance to yield an EQE intermediate between those of the m- and p-hybrids. The least CTC formation involving the L-hybrid is advantageous in accommodating the most singlets and triplets readily transferrable to both red and blue phosphors on account of its relatively high ET value. Furthermore, the L-hybrid offers the best morphological stability of the desired glassy EML, thus holding promise for the fabrication of superior PhOLEDs overall.

36 MATERIALS SCIENCE↗

Spatial exciton allocation strategy with reduced energy loss for high-efficiency fluorescent/phosphorescent hybrid white organic light-emitting diodes

Due to the poor operational lifetime of blue phosphorescent dopants and blue thermally activated delayed fluorescent (TADF) materials, hybrid white organic light-emitting diodes (WOLEDs) with conventional blue fluorescent emitters are still preferred for commercial applications in general lighting. However, the improvement in the overall efficiency of hybrid WOLEDs has been limited due to energy losses during the energy transfer process and exciton quenching after the spatial separation of the singlet and triplet excitons. Here we demonstrate the development of a Spatial Exciton Allocation Strategy (SEAS) to achieve close to 100% internal quantum efficiency (IQE) in blue-yellow complementary color hybrid WOLEDs. The employed blue fluorophore not only has a resonant triplet level with the yellow phosphor to reduce energy loss during energy transfer processes and triplet–triplet annihilation (TTA), but also has a resonant singlet level with the electron transport layer to extend singlet exciton distribution and enhance both singlet and triplet exciton utilization. Thus, the resulting hybrid WOLEDs exhibited 104 lm W -1 efficacy at 100 cd m -2 and 74 lm W -1 at 1000 cd m -2 with CIE coordinates of (0.42, 0.44) which is warm white and suitable for indoor lighting.

36 MATERIALS SCIENCE↗

Highly efficient saturated visible up-conversion photoluminescent Y 2 O 3 :Er 3+ microspheres pumped with a 1.55 μm laser diode

Highly efficient saturation up-conversion (UC) luminescent Y2O3:Er3+ microspheres have been successfully prepared via a hydrothermal-homogeneous precipitation method. Bright visible luminescence can be clearly seen with a 1.55 mu m laser diode excitation power as low as similar to 0.03 W cm(-2). The up-conversion (UC) emission spectra indicate that the strongest red emission with a peak situated at similar to 660 nm originated from the I-4(9/2) -> I-4(15/2) transition of Er3+. The peaks situated at similar to 520 and 550 nm can be assigned to the transition from H-2(11/2)/S-4(3/2) state to the ground state of Er3+. The high efficient saturation up-conversion emission is related to the highly crystalline structure. These results indicate a new way to enhance UC radiation in rare-earth ion-doped materials prepared using a hydrothermal-homogeneous precipitation method.

Zhao, Jinbo↗

Carbazole-substituted benzobisoxazoles: near-UV fluorescent emitters and ambipolar hosts for organic light-emitting diodes

The design of organic light emitting diode (OLED) materials with the potential for exhibiting thermally-activated delayed fluorescence (TADF) is reported. Using computational methods (DFT/TD-DFT) as a guiding tool, six materials with a benzobisoxazole (BBO) core and donor–acceptor–donor architectures were designed by changing the conjugation position of carbazole-substituted phenyl substituents and the type of BBO isomer (cis- vs. trans-). Experimental steady-state and transient absorption spectroscopic techniques were utilized to probe the TADF activity of these molecules. Each material was then used in host–guest OLED devices as either near-UV dopants or host with low singlet-triplet energy differences. The electroluminescent properties show that when used as dopants these materials provide near-UV emission (CIE y < 0.06 and CIE x = 0.16), whereas when used as hosts, these materials show reduced operating voltages and increased performance efficiencies when compared to commercial materials.

36 MATERIALS SCIENCE↗

Experimental observation of RF avalanche gain in GaN‐based PN junction diodes

Radio‐frequency (RF) reflection gain in GaN homojunction p‐n diode structures has been observed experimentally. A vertical p + /n structure grown on a native GaN substrate was used to achieve the high internal electric fields necessary to induce impact ionisation in GaN while minimising the effects of dislocations on the device performance. Amplitude and phase signatures in the measured RF reflection coefficient indicate the onset of impact ionisation within the device, with reflection gain observed at frequencies above 350 MHz. The magnitude of the measured gain is consistent with theoretical estimates of impact ionisation parameters, and the bias dependence of the measured reflection phase response is consistent with avalanche as the gain mechanism.

Fay, P.↗

Reproducible, rugged, and inexpensive photocathode x-ray diode

The photoemissive cathode type of x-ray diode (XRD) is popular for measuring time and spectrally resolved output of pulsed power experiments. Vitreous carbon XRDs currently used on the Sandia National Laboratories Z-machine were designed in the early 1980s and use materials and processes no longer available. Additionally cathodes used in the high x-ray flux and dirty vacuum environment of a machine such as Z suffer from response changes requiring recalibration. In searching for a suitable replacement cathode, we discovered very high purity vitreous-carbon planchets are commercially available for use as biological substrates in scanning electron microscope (SEM) work. After simplifying the photocathode mounting to use commercially available components, we constructed a set of 20 XRDs using SEM planchets that were then calibrated at the National Synchrotron Light Source at Brookhaven National Laboratory. We present comparisons of the reproducibility and absolute calibrations between the current vitreous-carbon XRDs and our new design.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Relative frequency stabilization of extended-cavity diode lasers for the re-pumping of Ca ion

Traditional stabilization methods of multiple lasers using Fabry-Perot interferometers need several optical devices for combining and separating the laser beams. Therefore, laser beams with similar frequencies are difficult to stabilize because they cannot be easily optically separated. For this reason, we built a new laser frequency stabilization system which does not require the optical separation of the laser beams. We achieved the frequency stabilization of two extended-cavity diode lasers using an FPI within {+-}5 MHz per hour.

74 ATOMIC AND MOLECULAR PHYSICS↗

Investigation of spectra unfolded for a filtered x-ray diode array with improved smoothness

An unfolding algorithm using parabolic B-splines to smoothly reconstruct the soft x-ray spectra from the measurements of a filtered x-ray diode array is proposed. This array has been fabricated for the study of the soft x ray emitted by Z-pinch plasma. Unfolding results show that for the simulated noise-free blackbody spectra with temperature ranging from 20 to 250 eV, both the spectra and the total power are accurately recovered. Typical experimental waveforms along with the unfolded spectra and total power of x rays are presented. Possible defects due to the adoption of parabolic B-splines instead of conventionally used histograms are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A relativistic planar diode

Potential and velocity distributions in a relativistic, planar diode are presented in the form of graphs for a range of initial injection velocities. The important stability conditions for distributions with a potential (velocity) minimum are also established.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spectrally narrowed edge emission from leaky waveguide modes in organic light-emitting diodes

A dramatic spectral line narrowing of the edge emission at room temperature from tris(quinolinolate) Al (Alq{sub 3}), N,N{prime}-diphenyl-N,N{prime}-bis(1-naphthylphenyl)-1,1{prime}-biphenyl-4,4{prime}-diamine (NPD), 4,4{prime}-bis(2,2{prime}-diphenyl-vinyl)-,1{prime}-biphenyl (DPVBi), and some guest-host small molecular organic light-emitting diodes (OLEDs), fabricated on indium tin oxide (ITO)-coated glass, is described. In all but the DPVBi OLEDs, the narrowed emission band emerges above a threshold thickness of the emitting layer, and narrows down to a full width at half maximum of only 5-10 nm. The results demonstrate that this narrowed emission is due to irregular waveguide modes that leak from the ITO to the glass substrate at a grazing angle. While measurements of variable stripe length l devices exhibit an apparent weak optical gain 0 {le} g {le} 1.86 cm{sup -1}, there is no observable threshold current or bias associated with this spectral narrowing. In addition, in the phosphorescent guest-host OLEDs, there is no decrease in the emission decay time of the narrowed edge emission relative to the broad surface emission. It is suspected that the apparent weak optical gain is due to misalignment of the axis of the waveguided mode and the axis of the collection lens of the probe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced electron capture and symmetrized carrier distribution in GaInN light-emitting diodes having tailored barrier doping

The confinement of electrons to the active region of GaInN light-emitting diodes(LEDs) is limited by the (i) inefficient electron capture into polar quantum wells, (ii) electron-attracting properties of electron-blocking layers (EBL), (iii) asymmetry in electron and hole transport, and (iv) unfavorable p-doping in the EBL for high Al content. To counteract these mechanisms, we employ tailored Si-doping in the quantum barriers (QBs). Experiments show a 37.5% enhancement in light-output power at high currents of one-QB-doped LEDs over all-QB-doped LEDs. These results are consistent with simulations showing that QB doping can be used to symmetrize the electron and hole distribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time resolved studies of catastrophic optical mirror damage in red-emitting laser diodes

We have observed the changing light intensity during catastrophic optical mirror damage (COMD) on the timescale of tens of nanoseconds using red-emitting AlGaInP quantum well based laser diodes. Using as-cleaved facets and this material system, which is susceptible to COMD, we recorded the drop in light intensity and the area of damage to the facet, as a function of current, for single, high current pulses. We found that in the current range up to 40 A, the total COMD process up to the drop of light intensity to nonlasing levels takes place on a timescale of hundreds of nanoseconds, approaching a limiting value of 200 ns, and that the measured area of facet damage showed a clear increase with drive current. Using a straightforward thermal model, we propose an explanation for the limiting time at high currents and the relationship between the time to COMD and the area of damaged facet material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spatially resolved argon microplasma diagnostics by diode laser absorption

Microplasmas were diagnosed by spatially resolved diode laser absorption using the Ar 801.4 nm transition (1s{sub 5}-2p{sub 8}). A 900 MHz microstrip split ring resonator was used to excite the microplasma which was operated between 100-760 Torr (13-101 kPa). The gas temperatures and the Ar 1s{sub 5} line-integrated densities were obtained from the atomic absorption lineshape. Spatially resolved data were obtained by focusing the laser to a 30 {mu}m spot and translating the laser path through the plasma with an xyz microdrive. At 1 atm, the microplasma has a warm core (850 K) that spans 0.2 mm and a steep gradient to room temperature at the edge of the discharge. At lower pressure, the gas temperature decreases and the spatial profiles become more diffuse.

74 ATOMIC AND MOLECULAR PHYSICS↗