Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Movement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Stationary Spatial Charging Demand Distribution for Commercial Electric Vehicles in Urban Area

The electric vehicle (EV) is an increasingly popu- lar mobility solution today. It is especially appealing for urban commercial usage including serving commuters and delivering goods. Commercial EVs, defined as electric taxi fleets in this paper, contribute a lot to the energy consumption and emission. One critical component to facilitate the adoption of EVs is to provide sufficient charging infrastructures for road users to alleviate the range anxiety. In this study, we develop an analytical model to profile the stationary spatial distribution of charging demand for any given fleet of commercial EVs, which serves as the necessary input for planning the location of charging infrastructures. Our model considers the movement of EVs as a random walk, with the underlying Markov process driven by the spatial demand that the commercial EV fleet needs to serve. We then define the electricity consumption and charging models and develop the probability distribution that an EV may need to recharge its battery at any given location in the city, based on the stationary distribution of the random walk process. We calibrate the performance parameters of EVs from the trip record and present numerical experiments based on New York City taxi trip data and compare the solution from simulation with our analytical solution. The result shows that analytical solution is quite close to the simulation result. This paper provides insights to the city agencies and private companies to make charging infrastructure location planning.

Qian, Xinwu↗

SSRS (Stochastic Soaring Raptor Simulator)

SSRS (Stochastic Soaring Raptor Simulator) is a generalizable, probabilistic, and predictive tool for wind energy developers, ecologists, wildlife managers and industry consultants to estimate the potential for soaring raptors to interact with operating wind turbines, without the need for site-specific data collection. Rapid expansion of wind energy development across the world has exposed the risk of turbine collisions for birds and bats. The risk to obligate soaring raptors such as golden eagles is of particular concern due to their small population and influence on ecological balance. Golden eagles rely heavily on updrafts to subsidize their flight, putting them in direct conflict with operational wind turbines that utilize the same wind resource. Understanding the behavior of soaring raptors with varying atmospheric conditions is crucial for predicting and mitigating the risk of turbine collision. This software contains a predictive movement model that simulates individual flight paths of golden eagles during updraft-subsidized long-distance flight, including migration. For a given set of atmospheric conditions, the model simulates thousands of eagles at turbine-scale spatial resolution (50m) to produce a relative presence density map. The simulated eagles rely on updrafts to pursue uninterrupted directional flight with minimal energy expenditure, following fluid-flow principles. The simulator includes a stochastic model of eagle behavior and a systematic method of accounting for spatiotemporal variations in atmospheric conditions. This framework only requires publicly available atmospheric data to estimate orographic and thermal updrafts, ensuring general usability.

Sandhu, Rimple↗

SOLAR MERIDIONAL CIRCULATION FROM DOPPLER SHIFTS OF THE Fe I LINE AT 5250 A AS MEASURED BY THE 150-FOOT SOLAR TOWER TELESCOPE AT THE MT. WILSON OBSERVATORY

Doppler shifts of the Fe I spectral line at 5250 A from the full solar disk obtained over the period 1986 to 2009 are analyzed to determine the circulation velocity of the solar surface along meridional planes. Simultaneous measurements of the Zeeman splitting of this line are used to obtain measurements of the solar magnetic field that are used to select low field points and impose corrections for the magnetically induced Doppler shift. The data utilized is from a new reduction that preserves the full spatial resolution of the original observations so that the circulation flow can be followed to latitudes of 80{sup 0} N/S. The deduced meridional flow is shown to differ from the circulation velocities derived from magnetic pattern movements. A reversed circulation pattern is seen in polar regions for three successive solar minima. A surge in circulation velocity at low latitudes is seen during the rising phases of cycles 22 and 23.

79 ASTRONOMY AND ASTROPHYSICS↗

Lifelong population connectivity between large rivers and their tributaries: A case study of shovelnose sturgeon from the Mississippi and Wisconsin rivers

Fishes that depend on large–river habitats have declined in many regions due to human alteration of both mainstems and tributaries. Conserving these species is often complicated by their dependence on long–distance movements to complete their life cycle, but the location of key habitats is difficult to assess across multiple life history stages. Movement of large–river fishes between mainstems and major tributaries is commonly observed, but the role of these exchanges at the population level is uncertain. We used shovelnose sturgeon ( Scaphirhynchus platorynchus ) as a case study for assessing the lifelong spatial ecology of large–river fishes. Fin ray microchemistry data indicate that shovelnose sturgeon from the Mississippi and Wisconsin rivers represent a unified population that relies on connections among multiple large–river habitats throughout life history. The tributary serves as an important spawning area, but fin ray chemistry data suggest larvae subsequently drift downstream to nursery habitats in the mainstem; an assertion that is supported by extensive field survey data. Our analyses underscore the lifelong importance of connections within river networks for maintaining viable populations of this, and likely other large–river species that have been documented to use tributary habitats. Furthermore, these findings support a metapopulation perspective on species that depend on large–river habitats, many of which are now highly altered and fragmented. For shovelnose sturgeon and species with similar life history, protecting or restoring linkages between mainstem rivers and their tributaries should be a conservation priority.

59 BASIC BIOLOGICAL SCIENCES↗

Geological Carbon Sequestration: A New Approach for Near-Surface Assurance Monitoring

There are two distinct objectives in monitoring geological carbon sequestration (GCS): Deep monitoring of the reservoir's integrity and plume movement and near-surface monitoring (NSM) to ensure public health and the safety of the environment. However, the minimum detection limits of the current instrumentation for NSM is too high for detecting weak signals that are embedded in the background levels of the natural variations, and the data obtained represents point measurements in space and time. A new approach for NSM, based on gamma-ray spectroscopy induced by inelastic neutron scatterings (INS), offers novel and unique characteristics providing the following: (1) High sensitivity with a reducible error of measurement and detection limits, and, (2) temporal- and spatial-integration of carbon in soil that results from underground CO{sub 2} seepage. Preliminary field results validated this approach showing carbon suppression of 14% in the first year and 7% in the second year. In addition the temporal behavior of the error propagation is presented and it is shown that for a signal at the level of the minimum detection level the error asymptotically approaches 47%.

54 ENVIRONMENTAL SCIENCES↗

Comparison of Heat Transfer from Airfoil in Natural and Simulated Icing Conditions

An investigation of the heat transfer from an airfoil in clear air and in simulated icing conditions was conducted in the NACA Lewis 6- by 9-foot icing-research tunnel in order to determine the validity of heat-transfer data as obtained in the tunnel. This investiation was made on the same model NACA 65,2-016 airfoil section used in a previous flight study, under similar heating, icing, and operating conditions. The effect of tunnel turbulence, in clear air and in icingwas indicated by the forward movement of transition from laminar to turbulent heat transfer. An analysis of the flight results showed the convective heat transfer in icing to be considerably different from that measured in clear air and. only slightly different from that obtained in the icing-research tunnel during simulated icing.

Gelder, Thomas F.↗

A Miniaturized Video System for Monitoring Drosophila Behavior

Long-term spaceflight may induce a variety of harmful effects in astronauts, resulting in altered motor and cognitive behavior. The stresses experienced by humans in space - most significantly weightlessness (microgravity) and cosmic radiation - are difficult to accurately simulate on Earth. In fact, prolonged and concomitant exposure to microgravity and cosmic radiation can only be studied in space. Behavioral studies in space have focused on model organisms, including Drosophila melanogaster. Drosophila is often used due to its short life span and generational cycle, small size, and ease of maintenance. Additionally, the well-characterized genetics of Drosophila behavior on Earth can be applied to the analysis of results from spaceflights, provided that the behavior in space is accurately recorded. In 2001, the BioExplorer project introduced a low-cost option for researchers: the small satellite. While this approach enabled multiple inexpensive launches of biological experiments, it also imposed stringent restrictions on the monitoring systems in terms of size, mass, data bandwidth, and power consumption. Suggested parameters for size are on the order of 100 mm3 and 1 kg mass for the entire payload. For Drosophila behavioral studies, these engineering requirements are not met by commercially available systems. One system that does meet many requirements for behavioral studies in space is the actimeter. Actimeters use infrared light gates to track the number of times a fly crosses a boundary within a small container (3x3x40 mm). Unfortunately, the apparatus needed to monitor several flies at once would be larger than the capacity of the small satellite. A system is presented, which expands on the actimeter approach to achieve a highly compact, low-power, ultra-low bandwidth solution for simultaneous monitoring of the behavior of multiple flies in space. This also provides a simple, inexpensive alternative to the current systems for monitoring Drosophila populations in terrestrial experiments, and could be especially useful in field experiments in remote locations. Two practical limitations of the system should be noted: first, only walking flies can be observed - not flying - and second, although it enables population studies, tracking individual flies within the population is not currently possible. The system used video recording and an analog circuit to extract the average light changes as a function of time. Flies were held in a 5-cm diameter Petri dish and illuminated from below by a uniform light source. A miniature, monochrome CMOS (complementary metal-oxide semiconductor) video camera imaged the flies. This camera had automatic gain control, and this did not affect system performance. The camera was positioned 5-7 cm above the Petri dish such that the imaging area was 2.25 sq cm. With this basic setup, still images and continuous video of 15 flies at one time were obtained. To reduce the required data bandwidth by several orders of magnitude, a band-pass filter (0.3-10 Hz) circuit compressed the video signal and extracted changes in image luminance over time. The raw activity signal output of this circuit was recorded on a computer and digitally processed to extract the fly movement "events" from the waveform. These events corresponded to flies entering and leaving the image and were used for extracting activity parameters such as inter-event duration. The efficacy of the system in quantifying locomotor activity was evaluated by varying environmental temperature, then measuring the activity level of the flies.

Bhattacharya, Sharmila↗

Gimbal Bearing Friction in the SLS Core Stage Thrust Vector Control System

The Space Launch System (SLS) Core Stage Thrust Vector Control (TVC) system is comprised of eight mechanical feedback Shuttle heritage Type III TVC actuators that vector the four Shuttle heritage RS-25 engines about a Shuttle heritage gimbal block/bearing. The MSFC Controls community has long regarded gimbal friction to be a negligible effect on the overall control of gimbaled RS-25 engines. This is corroborated by Space Shuttle test and flight data that does not appear to show degraded effects, nor limit cycling at the end of the shuttle flight. For this reason, friction was not expected to be a driving factor of performance and control of the reused RS-25 engines aboard the SLS. However, after test data showed a large shift in frequency behavior and a highly damped step-response in the time series, there was further investigation into what could have caused this behavior. Heritage friction models used in previous gimbal and ball bearings were evaluated such as Coulomb, Dahl and LuGre, but the single degree of freedom friction models alone were not enough to explain the behavior and shifts seen in the test data. This paper presents the additional findings and modeling efforts regarding friction on the RS-25 engines. Using the Two Actuator Operational Simulation (TAOS), the difference from modeling separate friction degrees of freedom to coupled degrees of freedom was investigated to deduce the effects of one axis’s movement on the other. Next, due to the vibration environment, a modified LuGre model has been proposed that adds an additional term to decrease the friction coefficient at low engine velocity amplitudes. Lastly, the addition of the stiffness in each half of the gimbal bearing has increased modeling fidelity by also adding the effect on the gimbal bearing bending in compliance to both the friction torque on the surface of the gimbal bearing and the actuator force that is forcing the engine in a specified direction. Through these effects, the time and frequency domain behavior seen in test can be characterized accurately.

Friction↗

Gimbal Bearing Friction in the SLS Core Stage Thrust Vector Control System

The Space Launch System (SLS) Core Stage Thrust Vector Control (TVC) system is comprised of eight mechanical feedback Shuttle heritage Type III TVC actuators that vector the four Shuttle heritage RS-25 engines about a Shuttle heritage gimbal block/bearing. The MSFC Controls community has long regarded gimbal friction to be a negligible effect on the overall control of gimbaled RS-25 engines. This is corroborated by Space Shuttle test and flight data that does not appear to show degraded effects, nor limit cycling at the end of the shuttle flight. For this reason, friction was not expected to be a driving factor of performance and control of the reused RS-25 engines aboard the SLS. However, after test data showed a large shift in frequency behavior and a highly damped step-response in the time series, there was further investigation into what could have caused this behavior. Heritage friction models used in previous gimbal and ball bearings were evaluated such as Coulomb, Dahl and LuGre, but the single degree of freedom friction models alone were not enough to explain the behavior and shifts seen in the test data. This paper presents the additional findings and modeling efforts regarding friction on the RS-25 engines. Using the Two Actuator Operational Simulation (TAOS), the difference from modeling separate friction degrees of freedom to coupled degrees of freedom was investigated to deduce the effects of one axis’s movement on the other. Next, due to the vibration environment, a modified LuGre model has been proposed that adds an additional term to decrease the friction coefficient at low engine velocity amplitudes. Lastly, the addition of the stiffness in each half of the gimbal bearing has increased modeling fidelity by also adding the effect on the gimbal bearing bending in compliance to both the friction torque on the surface of the gimbal bearing and the actuator force that is forcing the engine in a specified direction. Through these effects, the time and frequency domain behavior seen in test can be characterized accurately.

Friction↗

Developing Soret Transport Coefficients for Lanthanides from Experimental Results

Understanding the nature of lanthanide transport in metallic fuels and its relation to fuel clad chemical interaction (FCCI) has been has been a topic that is long on interest and short on data. Recent experiments have shown a strong temperature-gradient based diffusion (Soret diffusion) and have thus provided vitally important information for modelers. However, details about the actual coefficients and many of the relevant processes that crucially participate in the cerium migration and precipitation process have not yet been disclosed. Using a combination of computing tools (primarily python and BISON) we are exploring methods that may extract useful information from visual data. In this specific example, we are using what is formally called 'blob detection' algorithms to analyzed the precipitate distribution of cerium in a U-Zr metal that has had a fixed temperature gradient enforced upon it for a specified period of time. These algorithms, once properly adapted to the problem at hand, may be useful at extracting information from radial and axial scans of metallic fuels which are much more abundant than direct measurements of lanthanides. We have developed a model that qualitatively works to move mass along a temperature gradient and precipitate heavily in the cold regions. Additionally, we have observed that the solubility of cerium in U-Zr held under this kind of temperature gradient is subject to some amount of U-Zr constituent redistribution. Our results predict movement of the Zr toward the hot end of the rod followed by a U-rich layer with the cooler 3/5 of the rod staying close the the initial U-Zr distribution. A more complete analysis will define groups of correlated parameters that correctly simulate the resulting distribution of precipitates. This restricted parameters space will give smaller bounds to modelers and will expedite the analysis of future works as new and more accurate data are made available. A follow-up experiment that started with 1/10 of the initial concentration of cerium may provide valuable additional information with regard to the effect of the rates of precipitation and dissolution as well as demonstrating the potential rapidity of migration in a lower burnup scenario. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhancing trap and fault seal analyses by integrating observations from HR3D seismic data with well logs and conventional 3D seismic data, Texas inner shelf

An understanding of trap and fault seal quality is critical for assessing hydrocarbon prospectivity. To achieve this, modern analytical techniques leverage well data and conventional industry-standard 3D seismic data to evaluate the trap, and any faults displacing the reservoir and top seal intervals. Above all, geological interpretation provides the framework of trap and fault seal analyses, but can be hindered by the data resolution, quality and acquisition style of the conventional seismic data. Furthermore, limiting the analysis to only the petroleum system at depth may lead to erroneous perceptions because interpreting overburden features, such as shallow faults or gas chimneys, can provide valuable observations with respect to container performance, and can to help validate trap and fault seal predictions. Here, a supplement to conventional 3D data are high-resolution 3D seismic (HR3D) data, which provide detailed images of the overburden geology. This study utilizes an HR3D seismic volume in the San Luis Pass area of the Texas inner shelf, where shallow fault tips and a sizeable gas chimney are interpreted over an unsuccessful hydrocarbon prospect. Static post-drill fault seal and trap analyses suggest that the primary fault displacing the structural closure could have withheld columns of gas c. 100 m high, but disagree with our HR3D seismic interpretations and dry-well analyses. From our results, we hypothesize that tertiary gas migration through fault conduits reduced the hydrocarbon column in the prospective Early Miocene reservoir, and may have resulted from continued movement along the intersecting faults. Overall, this study reinforces the importance of understanding the overburden geology and geohistory of faulted prospects, and demonstrates the utility of pre-drill HR3D acquisition when conducting trap and fault seal analyses.

3D seismic↗

Radionuclide surrogate aerosolization, resuspension and suppression in hazardous situations

Radioactive fire following nuclear accidents causes resuspension of radioactive contamination that can spread over large areas. Although many papers focus on particle deposition and resuspension, a limited number of studies model its suppression. Even less data is available for the comparison of emissions across particle size, surface, and mode of resuspension. In this study, cerium dioxide surrogate for internal hazards such as radionuclide particle matter was aerosolized into a large chamber and subsequently resuspended after sedimentation. Resuspension was induced by common modes of human movement including walking, wind, and driving on common surfaces including polyvinyl chloride (PVC), artificial grass (turf), and concrete in a 5.8 m long, 3.7 m wide and 3 m high tent. The resuspension was experimentally measured for two particle sizes (1 and 10 μm) at three different heights (0.3 m, 1.2 m, and 2.4 m) and compared across size, surface, and mode of resuspension. Particle size distribution was measured using an aerodynamic particle sizer and the resuspended particles were collected with the wetted wall cyclone aerosol collector and quantitated using inductively coupled plasma mass spectrometry. The testing was repeated with the F-500 fire retardant application to study its effect on resuspension. In this study, artificial grass flooring was found to generate the most resuspension, with walking on turf for the 1 μm particle testing yielding the highest factor overall. Concrete had the lowest resuspension, showing variations in the size distribution of aerosol as a function of height from the source resuspension factors. The application of fire retardant was found to significantly reduce surrogate resuspension, regardless of resuspension method or testing surface. Here, the results provide impactful information regarding the different modes of resuspension including human transport (walking and driving) and wind for the resuspension of radionuclide surrogate particles deposited onto common surfaces and the effect of fire retardant application on their resuspension, leading to higher levels of safety for nuclear energy plants and facilities.

42 ENGINEERING↗

Simulator evaluation of display concepts for pilot monitoring and control of space shuttle approach and landing. Phase 2: Manual flight control

A study of the display requirements for final approach management of the space shuttle orbiter vehicle is presented. An experimental display concept, providing a more direct, pictorial representation of the vehicle's movement relative to the selected approach path and aiming points, was developed and assessed as an aid to manual flight path control. Both head-up, windshield projections and head-down, panel mounted presentations of the experimental display were evaluated in a series of simulated orbiter approach sequence. Data obtained indicate that the experimental display would enable orbiter pilots to exercise greater flexibility in implementing alternative final approach control strategies. Touchdown position and airspeed dispersion criteria were satisfied on 91 percent of the approach sequences, representing various profile and wind effect conditions. Flight path control and airspeed management satisfied operationally-relevant criteria for the two-segment, power-off orbiter approach and were consistently more accurate and less variable when the full set of experimental display elements was available to the pilot. Approach control tended to be more precise when the head-up display was used; however, the data also indicate that the head-down display would provide adequate support for the manual control task.

Gartner, W. B.↗

Weak dynamical effects in the Uranian ring system

Published data on the orbits of the rings and satellites of Uranus are analyzed in terms of their dynamic interaction, in an attempt to explain discrepancies between current kinematic models of the ring system and recent, very accurate occultation observations. Apse precession, short-term perturbations, satellite resonance, and the movement of the planet and rings with respect to the barycenter of the planet-satellite system are investigated. It is found that the five known satellites could cause the observed ring residuals by shifting the barycenter, but not by direct or resonance effects. Hypothetical interring shepherd satellites of limited mass (such as about 10 to the 19th g for a shepherd between rings 4 and 5), possibly affected by known-satellite resonances, could influence the rings directly.

Freedman, A. P.↗

Evidence of ongoing crustal deformation related to magmatic activity near Socorro, New Mexico

Leveling measurements conducted in 1980-1981 by the National Geodetic Survey in the Socorro area of the Rio Grande rift are analyzed. Crustal uplift related to magma inflation in the midcrustal magma body is detected; an uplift of 0.18 cm/yr is measured for the time between 1951-1980. The survey data of 1911 and 1959 are compared to the present data and good correlation is observed. The systematic leveling errors including height-dependence and refraction errors are studied. The 30-km-wide subsidence in the area is examined. The spatial correlation between seismic activity, the Socorro magma body, and crustal deformation in Socorro is investigated. The crustal movement from magma reservior activities is modeled using the formulations of Dieterich and Decker (1975). The modeling of the deformation reveals that the movement in the Socorro area is associated with the 19-km deep Socorro magma body.

Larsen, S.↗

M.I.T./Canadian vestibular experiments on the Spacelab-1 mission. IV - Space motion sickness: Symptoms, stimuli, and predictability

Three cases of motion sickness that occurred on Spacelab-1 are described. The relation between head movements and symptom intensity is examined. The effects of visual, tactile, and proprioceptive orientation cues on motion sickness are studied. The effectiveness of the drugs used is evaluated and it is observed that the drugs reduce the frequency of vomiting and overall discomfort. Preflight and postflight motion sickness susceptibility data are presented.

Oman, C. M.↗

Resolving Sensory Conflict: the Effect of Muscle Vibration on Postural Stability

The otolith-tilt reinterpretation hypothesis (OTTR) proposes that the central nervous system adapts to weightlessness by reinterpreting all otolith input as linear motion. While interpreting otolith input exclusively as linear motion is functionally useful in space, it is maladaptive upon return to Earth. Astronauts have reported experiencing illusory sensations during head movement which contributes to postural instability. The effect is assessed of muscle vibration in combination with a variety of sensory conflicts on postural equilibrium. The equilibrium of six healthy subjects was tested using the EquiTest sensory test protocol, with and without the confounding influence of triceps surea vibration. The data were analyzed with repeated measures with vibration, vision status, and platform status as independent variables. All main effects and an interaction between the presence of vision and platform sway referencing were found to be significant. Overall, a 4.5 pct. decrease in postural stability was observed with vibration. The trend of the difference scores between conditions with and without vibration suggests that vibration is most destabilizing when the triceps surea is able to change length during postural sway (i.e., conditions with a fixed support surface). The impact of sway referencing vision was virtually identical to that of eye closure, providing compelling evidence that sway referencing 'nulls out' useful cues about subject sway.

Layne, Charles S.↗

Preconditioning electromyographic data for an upper extremity model using neural networks

A back propagation neural network has been employed to precondition the electromyographic signal (EMG) that drives a computational model of the human upper extremity. This model is used to determine the complex relationship between EMG and muscle activation, and generates an optimal muscle activation scheme that simulates the actual activation. While the experimental and model predicted results of the ballistic muscle movement are very similar, the activation function between the start and the finish is not. This neural network preconditions the signal in an attempt to more closely model the actual activation function over the entire course of the muscle movement.

Roberson, D. J.↗