Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuse radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Fabrication and subband gap optical properties of silicon supersaturated with chalcogens by ion implantation and pulsed laser melting

Topographically flat, single crystal silicon supersaturated with the chalcogens S, Se, and Te was prepared by ion implantation followed by pulsed laser melting and rapid solidification. The influences of the number of laser shots on the atomic and carrier concentration-depth profiles were measured with secondary ion mass spectrometry and spreading resistance profiling, respectively. We found good agreement between the atomic concentration-depth profiles obtained from experiments and a one-dimensional model for plane-front melting, solidification, liquid-phase diffusion, with kinetic solute trapping, and surface evaporation. Broadband subband gap absorption is exhibited by all dopants over a wavelength range from 1 to 2.5 microns. The absorption did not change appreciably with increasing number of laser shots, despite a measurable loss of chalcogen and of electronic carriers after each shot.

36 MATERIALS SCIENCE↗

Control of the local devitrification on oxyfluoride glass doped with Er{sup 3+} ions under diode laser irradiation

Temperature control of the devitrification process in an erbium doped oxyfluoride glass under laser irradiation is reported. The green upconversion emissions around 525 and 545 nm originated from the thermalized {sup 2}H{sub 11/2} and {sup 4}S{sub 3/2} levels were studied when the glass structure changes to glass ceramic during irradiation with a laser beam. Power dependence of the fluorescence intensity ratio was used to determine the temperature of the irradiated zone. The transition from glass to glass ceramic takes place under 2300 mW of laser power with an estimated temperature around 783 K. This result agrees with the one obtained in the samples devitrified under conventional furnace treatment. Therefore, the estimation of the temperature of the irradiated zone through the fluorescence intensity ratio method allows a controlled devitrification. Moreover, an irradiated line has been written in the glass showing an important diffusion of the Pb{sup 2+} and F{sup -} ions. These results confirm that nanocrystals have been created due to the laser action.

36 MATERIALS SCIENCE↗

Nonlinear dependence of complex plasma parameters on applied electric field

This paper presents an analysis of the effect of an applied static or alternating electric field on the electron density and temperature, charge on the particles, the electron collision frequency, the electronic conductivity, and the coefficient of electron diffusion in a complex plasma (i) when not illuminated by light, which can cause photoelectric emission from the particles, and (ii) when so illuminated. A parametric analysis based on computations for some typical sets of parameters has also been made. The significance of this work to (i) the disappearance of a polar mesospheric summer echoes structure by radio wave and (ii) magneto-hydrodynamic (MHD) power generation has also been indicated. The time dependence of the various parameters after the application of the electric field has also been discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of early stages of island growth during pulsed deposition: Role of closed compact islands

After a brief review of recent modeling of growth during Pulsed Laser Deposition (PLD), we present the study of a role of adatom interactions on growth of surface islands during PLD in submonolayer regime. We employ kinetic Monte Carlo simulation with reversible growth. Attachment of monomers to islands is irreversible at low temperatures while it becomes reversible at higher temperatures, small islands become unstable with growing temperature. In the case of real system we have to take into account not only diffusion of monomers but also diffusivity of dimers and larger clusters and theirs stability. Our new code allows us to study processes which proceed on different time scales which are typical in PLD experiments: fast deposition (on scale order of 10{sup -5} s) during individual pulses, and relaxation of a system between pulses (on scale order of 0.1 s). We calculate and compare the temperature dependence of island density for two modes pulsed deposition and continuous Molecular Beam Epitaxy (MBE) growth. The island densities in PLD mode are substantially higher than in MBE mode, provided the temperature is sufficiently high. In the case of PLD, we observe anomalous temperature dependence of the island density in a certain temperature interval. It is due to the interplay between a cluster decay time and an interval between pulses. The cluster decay time depends not only on temperature but also on clusters size and shape. The anomalous behavior is caused by the temperature limited stability of the closed--compact clusters. This scenario was revealed for the simplified model with only nearest-neighbor interaction. Now, it is elucidated further and we also include interaction to second and third neighbors. We analyze role of the closed-compact surface island in kinetics of both growth modes. Furthermore, by varying interactions energies, diffusion barrier and parameters of deposition, we compare results of simulations with the PLD experiment for Fe/Mo system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of ZnO Nanocrystalline via Facile Non-Hydrolytic Route

Zinc oxide (ZnO) nanocrystalline were synthesized via oxidizing Zn powder in non-aqueous solvent with addition of Diethanolamine (DEA) as a stabilizing agent. The influence of DEA on the structural, optical properties and the formation of ZnO nanocrystalline were studied. The synthesized ZnO were polycrystalline in structures where sample without the addition of DEA shows high intensity peak of (002) phase compared with sample in the presence of DEA which preferred to grow in (101) direction. SEM micrograph displays the morphology of ZnO nanocrystalline for both of the samples which shows micron size and non-uniform particles for sample without DEA whereas for sample with DEA exhibit smaller size ({approx}110 nm) and nearly spherical in shape despite of some agglomeration occurs at the interparticle separation. The photoluminescence (PL) spectra shows UV emission peak for both of the samples where sample with the absence of DEA possess lower intensity of UV emission peak compared to samples with DEA which demonstrate stronger intensity despite of having very weak visible secondary emission peak at 530 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reactivation of sub-bandgap absorption in chalcogen-hyperdoped silicon

Silicon doped with nonequilibrium concentrations of chalcogens using a femtosecond laser exhibits near-unity absorption of sub-bandgap photons to wavelengths of at least 2500 nm. Previous studies have shown that sub-bandgap absorptance decreases with thermal annealing up to 1175 K and that the absorption deactivation correlates with chalcogen diffusivity. In this work, we show that sub-bandgap absorptance can be reactivated by annealing at temperatures between 1350 and 1550 K followed by fast cooling (>50 K/s). Our results suggest that the defects responsible for sub-bandgap absorptance are in equilibrium at high temperatures in hyperdoped Si:chalcogen systems.

36 MATERIALS SCIENCE↗

Scattering of Radio Frequency Waves by Edge Density Blobs in Tokamak Plasmas

The density blobs and fluctuations present in the edge region of magnetic fusion devices can scatter radio frequency (RF) waves through refraction and diffraction. The scattering can diffuse the rays in space and in wave-vector space. The diffusion in space can make the rays miss their intended target region, while the diffusion in wave-vector space can broaden the wave spectrum and modify the wave damping and current profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An in situ approach to study trace element partitioning in the laser heated diamond anvil cell

Data on partitioning behavior of elements between different phases at in situ conditions are crucial for the understanding of element mobility especially for geochemical studies. Here, we present results of in situ partitioning of trace elements (Zr, Pd, and Ru) between silicate and iron melts, up to 50 GPa and 4200 K, using a modified laser heated diamond anvil cell (DAC). This new experimental set up allows simultaneous collection of x-ray fluorescence (XRF) and x-ray diffraction (XRD) data as a function of time using the high pressure beamline ID27 (ESRF, France). The technique enables the simultaneous detection of sample melting based to the appearance of diffuse scattering in the XRD pattern, characteristic of the structure factor of liquids, and measurements of elemental partitioning of the sample using XRF, before, during and after laser heating in the DAC. We were able to detect elements concentrations as low as a few ppm level (2-5 ppm) on standard solutions. In situ measurements are complimented by mapping of the chemical partitions of the trace elements after laser heating on the quenched samples to constrain the partitioning data. Our first results indicate a strong partitioning of Pd and Ru into the metallic phase, while Zr remains clearly incompatible with iron. This novel approach extends the pressure and temperature range of partitioning experiments derived from quenched samples from the large volume presses and could bring new insight to the early history of Earth.

36 MATERIALS SCIENCE↗

Time-resolved multiple probe spectroscopy

Time-resolved multiple probe spectroscopy combines optical, electronic, and data acquisition capabilities to enable measurement of picosecond to millisecond time-resolved spectra within a single experiment, using a single activation pulse. This technology enables a wide range of dynamic processes to be studied on a single laser and sample system. The technique includes a 1 kHz pump, 10 kHz probe flash photolysis-like mode of acquisition (pump-probe-probe-probe, etc.), increasing the amount of information from each experiment. We demonstrate the capability of the instrument by measuring the photolysis of tungsten hexacarbonyl (W(CO){sub 6}) monitored by IR absorption spectroscopy, following picosecond vibrational cooling of product formation through to slower bimolecular diffusion reactions on the microsecond time scale.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Generation of mirage effect by heated carbon nanotube thin film

Mirage effect, a common phenomenon in nature, is a naturally occurring optical phenomenon in which lights are bent due to the gradient variation of refraction in the temperature gradient medium. The theoretical analysis of mirage effect generated by heated carbon nanotube thin film is presented both for gas and liquid. Excellent agreement is demonstrated through comparing the theoretical prediction with published experimental results. It is concluded from the theoretical prediction and experimental observation that the mirage effect is more likely to happen in liquid. The phase of deflected optical beam is also discussed and the method for measurement of thermal diffusivity of medium is theoretically verified. Furthermore, a method for measuring the refractive index of gas by detecting optical beam deflection is also presented in this paper.

36 MATERIALS SCIENCE↗

On the evolution of cured voxel in bulk photopolymerization upon focused Gaussian laser exposure

Unconstrained depth photopolymerization is emerging as a promising technique for fabrication of several polymer microstructures such as self propagating waveguides, 3D freeform structures by bulk lithography, and polymer nanoparticles by flash exposure. Experimental observations reveal governing physics beyond Beer Lambert's law and scattering effects. This paper seeks to model unconstrained depth photopolymerization using classical nonlinear Schrödinger equation coupled with transient diffusion phenomenon. The beam propagation part of the proposed model considers scattering effects induced due to spatial variation of the refractive index as a function of the beam intensity. The critical curing energy model is used to further predict profile of polymerized voxel. Profiles of photopolymerized voxel simulated using proposed model are compared with the corresponding experimental results for several cases of exposure dose and duration. The comparison shows close match leading to conclusion that the experimentally observed deviation from Beer Lambert's law is indeed due to combined effect of diffusion of photoinitiator and scattering of light because of change in the refractive index.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control of light diffusion in a disordered photonic waveguide

We control the diffusion of light in a disordered photonic waveguide by modulating the waveguide geometry. In a single waveguide of varying cross-section, the diffusion coefficient changes spatially in two dimensions due to localization effects. The intensity distribution inside the waveguide agrees with the prediction of the self-consistent theory of localization. Our work shows that wave diffusion can be efficiently manipulated without modifying the structural disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanodot formation induced by femtosecond laser irradiation

The femtosecond laser generation of ZnSe nanoscale features on ZnSe surfaces was studied. Irradiation with multiple exposures produces 10–100 nm agglomerations of nanocrystalline ZnSe while retaining the original single crystal structure of the underlying material. The structure of these nanodots was verified using a combination of scanning transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. The nanodots continue to grow hours after irradiation through a combination of bulk and surface diffusion. We suggest that in nanodot formation the result of ultrafast laser induced point defect formation is more than an order of magnitude below the ZnSe ultrafast melt threshold fluence. This unique mechanism of point defect injection will be discussed.

36 MATERIALS SCIENCE↗

Interface study and performance of large layer pair ultra-short period W/B{sub 4}C X-ray multilayer

The nature of interfaces in ultra short period W/B{sub 4}C multilayers (MLs) is studied using hard x-ray reflectivity and cross sectional transmission electron microscope. W/B{sub 4}C MLs are fabricated using magnetron sputtering system with systematic varying thickness of both W and B{sub 4}C layers from ∼5 to 30 Å keeping number of layer pairs fixed at 10. It is observed that in low period W/B{sub 4}C ML, as the layer thickness decreases, the interdiffusion plays a significant role because of the discontinuous nature of film. This gives variation of density and roughness of the layer as well as generates thickness errors in the ML structure due to volume changes which is originated by interdifusion process. Finally, W/B{sub 4}C MLs with large number of layer pairs (300) are fabricated with periodicity d= 20 Å which gives ∼54 % of reflectivity at energy 8.047 keV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interface structure in nanoscale multilayers near continuous-to-discontinuous regime

Interfacial atomic diffusion, reaction, and formation of microstructure in nanoscale level are investigated in W/B{sub 4}C multilayer (ML) system as functions of thickness in ultrathin limit. Hard x-ray reflectivity (XRR) and x-ray diffuse scattering in conjunction with x-ray absorption near edge spectroscopy (XANES) in soft x-ray and hard x-ray regimes and depth profiling x-ray photoelectron spectroscopy (XPS) have been used to precisely evaluate detailed interfacial structure by systematically varying the individual layer thickness from continuous-to-discontinuous regime. It is observed that the interfacial morphology undergoes an unexpected significant modification as the layer thickness varies from continuous-to-discontinuous regime. The interfacial atomic diffusion increases, the physical density of W layer decreases and that of B{sub 4}C layer increases, and further more interestingly the in-plane correlation length decreases substantially as the layer thickness varies from continuous-to-discontinuous regime. This is corroborated using combined XRR and x-ray diffused scattering analysis. XANES and XPS results show formation of more and more tungsten compounds at the interfaces as the layer thickness decreases below the percolation threshold due to increase in the contact area between the elements. The formation of compound enhances to minimize certain degree of disorder at the interfaces in the discontinuous region that enables to maintain the periodic structure in ML. The degree of interfacial atomic diffusion, interlayer interaction, and microstructure is correlated as a function of layer thickness during early stage of film growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Method of measuring blood oxygenation based on spectroscopy of diffusely scattered light

A new approach to the measurement of blood oxygenation is developed and implemented, based on an original two-step algorithm reconstructing the relative concentration of biological chromophores (haemoglobin, water, lipids) from the measured spectra of diffusely scattered light at different distances from the radiation source. The numerical experiments and approbation of the proposed approach using a biological phantom have shown the high accuracy of the reconstruction of optical properties of the object in question, as well as the possibility of correct calculation of the haemoglobin oxygenation in the presence of additive noises without calibration of the measuring device. The results of the experimental studies in animals agree with the previously published results obtained by other research groups and demonstrate the possibility of applying the developed method to the monitoring of blood oxygenation in tumour tissues. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

ESTIMATION OF THE RECONNECTION ELECTRIC FIELD IN THE 2003 OCTOBER 29 X10 FLARE

The electric field in the reconnecting current sheet of the 2003 October 29 X10 flare is estimated to be a few kV m{sup -1} in this study, based on the rate of change in the photospheric magnetic flux in the newly brightened areas of Transition Region and Coronal Explorer (TRACE) UV ribbons. For comparison, the motion speed of Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) hard X-ray (HXR) footpoints and the photospheric magnetic field strength are also used for the electric field calculation. This X10 flare event is selected due to its distinct two-phase HXR kernel motion, two arcade systems with different magnetic shear, and the high cadence and complete coverage of the TRACE 1600 A Michelson Doppler Imager (MDI) magnetogram and RHESSI HXR observations. We pay particular attention to the electric field characteristics in different flare phases, as well as the temporal correlation with the HXR emission and its power-law spectral index and the photospheric magnetic field strength. We found that in the early impulsive phase, the reconnection electric field peaks just before the HXR emission peaks and the energy spectrum hardens. The result is consistent with the scenario that more particles are accelerated to higher energies by larger reconnection electric fields and then precipitate into the lower chromosphere to produce stronger HXR emissions. Such a particle acceleration mechanism plays its most significant role in the impulsive phase of this flare. In addition, our results provide evidence that the highly sheared magnetic field lines are mapped to the magnetic reconnection diffusion region to produce a large reconnection electric field.

79 ASTRONOMY AND ASTROPHYSICS↗

CHARACTERIZING COSMIC-RAY PROPAGATION IN MASSIVE STAR-FORMING REGIONS: THE CASE OF 30 DORADUS AND THE LARGE MAGELLANIC CLOUD

Using infrared, radio, and {gamma}-ray data, we investigate the propagation characteristics of cosmic-ray (CR) electrons and nuclei in the 30 Doradus (30 Dor) star-forming region in the Large Magellanic Cloud (LMC) using a phenomenological model based on the radio-far-infrared correlation within galaxies. Employing a correlation analysis, we derive an average propagation length of {approx}100-140 pc for {approx}3 GeV CR electrons resident in 30 Dor from consideration of the radio and infrared data. Assuming that the observed {gamma}-ray emission toward 30 Dor is associated with the star-forming region, and applying the same methodology to the infrared and {gamma}-ray data, we estimate a {approx}20 GeV propagation length of 200-320 pc for the CR nuclei. This is approximately twice as large as for {approx}3 GeV CR electrons, corresponding to a spatial diffusion coefficient that is {approx}4 times higher, scaling as (R/GV){sup {delta}} with {delta} Almost-Equal-To 0.7-0.8 depending on the smearing kernel used in the correlation analysis. This value is in agreement with the results found by extending the correlation analysis to include {approx}70 GeV CR nuclei traced by the 3-10 GeV {gamma}-ray data ({delta} Almost-Equal-To 0.66 {+-} 0.23). Using the mean age of the stellar populations in 30 Dor and the results from our correlation analysis, we estimate a diffusion coefficient D{sub R} Almost-Equal-To (0.9-1.0) Multiplication-Sign 10{sup 27}(R/GV){sup 0.7} cm{sup 2} s{sup -1}. We compare the values of the CR electron propagation length and surface brightness for 30 Dor and the LMC as a whole with those of entire disk galaxies. We find that the trend of decreasing average CR propagation distance with increasing disk-averaged star formation activity holds for the LMC, and extends down to single star-forming regions, at least for the case of 30 Dor.

79 ASTRONOMY AND ASTROPHYSICS↗