Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Quantification of Lanthanides in a Molten Salt Reactor Surrogate Off-Gas Stream Using Laser-Induced Breakdown Spectroscopy

To enable the deployment of molten salt reactor technology, the development of off-gas treatment systems and advanced monitoring tools capable of operating with high temperatures and radiation fields while delivering near real-time information is necessary. Here, we aim to fulfill this requirement and proposes laser-induced breakdown spectroscopy (LIBS) for monitoring molten salt aerosol streams. A sheath gas measuring method was developed to protect optical elements from aerosol particles and to ensure a relatively constant aerosol stream for measurement. An aqueous system was studied to demonstrate the utility of LIBS for monitoring possible fission products in an aerosol stream: Gd, Nd, and Sm up to 2000 parts per million (ppm). A calibration model was built using partial least squares (PLS) regression with five, six, and nine latent variables for Gd, Nd, and Sm, respectively. This calibration model successfully estimated the concentrations of three test samples, which were validated with inductively charged plasma optical emission spectroscopy measurements at a 99.9% confidence interval. To enhance these models, a genetic algorithm was used to filter the spectra before entering the PLS model, thereby limiting the spectral features being regressed to those with greater correlations to concentration. This allowed for the number of latent variables used in the PLS models to be reduced to four, three, and three for Gd, Nd, and Sm, respectively. Finally, the genetic algorithm-filtered PLS models were used to predict the concentrations of the aerosol stream on a real-time dataset and resulted in a 73%, 18%, and 25% improvement in root mean squared error of prediction compared to the original PLS models developed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Characterization of the Multi-Coincident Bismuth Germanate Oxide Spectrometer at the Nuclear Counting Facility

A multi-detector γ-ray spectroscopy system including 3 high-purity germanium (HPGe) detectors has been developed at the Nuclear Counting Facility at Lawrence Livermore National Laboratory. This system operates not only in conventional singles γ-ray detection mode but also incorporates features like coincidence and anti-coincidence techniques. These advanced detection modes can significantly enhance the system’s sensitivity, making it a powerful tool for isotope identification and quantification, especially for complex samples with high background and overlapping peaks. In this re port, we present a comprehensive performance characterization of the Multi-Coincident Bismuth Oxide Spectrometer (MCBOS) using a variety of sample types, including 60 Co, 48 Sc, and mixed fission product samples. Each sample provides unique tests for the MCBOS capabilities. Additionally, a GEANT4 model of the MCBOS has been generated to aid with the characterization of the system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Relation Between the Defect Interactions and the Serration Dynamics in a Zr-Based Bulk Metallic Glass

For this study, the effects of thermal annealing and compressive strain rate on the complexity of the serration behavior in a Zr-based bulk metallic glass (BMG) was investigated. Here, as-cast and thermally-annealed (300 °C, 1 week) Zr 52.5 Cu 17.9 Ni 14.6 Al 10 Ti 5 BMG underwent room-temperature compression tests in the unconstrained condition at strain rates of 2 × 10 -5 s -1 and 2 × 10 -4 s -1 . The complexity of the serrated flow was determined, using the refined composite multiscale entropy technique. Nanoindentation testing and X-ray diffraction characterization were performed to assess the changes in the microstructure and mechanical properties of the BMG that occurred during annealing. The results indicated that the BMG did not crystallize during annealing in the prescribed heating condition. Nanoindentation tests revealed that annealing led to a significant increase in the depth-dependent nanoindentation hardness and Young’s modulus, which were attributed to the structural relaxation in the glass. Furthermore, both annealing and an increased strain rate resulted in a marked enhancement in the complexity of the serrated flow during compression. It was concluded that the increase in the sample entropy with increasing strain rate is related to an increase in the number of defect interactions during the serrated flow.

36 MATERIALS SCIENCE↗

Tetrafluoroboric Acid Digestion for Accurate Determination of Rare Earth Elements in Coal and Fly Ash by ICP-MS Analysis

Coal and coal-related fly ash often contain rare earth elements (REEs) that have the potential to be utilized as valuable mineral resources. Accurately determining the REE content in coal and fly ash is crucial for resource evaluation. The conventional approach involves using hydrofluoric acid (HF) to dissolve silicates and release REEs, which, however, prolongs the digestion process due to the additional step of complexing fluoride ions (F−) with boric acid (H3BO3). Determining the correct amount of H3BO3 for neutralization can be challenging, and in some instances, the binding of fluoride ions with certain lanthanides (Lns) hampers the accurate determination of all 14 naturally occurring rare earth elements in a single digestion batch by inductively coupled plasma mass spectrometry (ICP-MS). In this study, we present an alternative method that achieves the accurate determination of all 14 naturally occurring REEs using tetrafluoroboric acid (HBF4) followed by ICP-MS analysis. This approach eliminates the need for an F− complexing step. We tested this method on certified REE reference materials, including NIST 1632e (coal) and NIST 1633c (fly ash), as well as the REE geological reference material USGS AGV-1 (andesite). Our results demonstrated excellent recovery rates (relative standard deviation, RSD < ±10%), with a correlation coefficient (r2) exceeding 0.99. Using this method, we investigated the concentrations of all 14 REEs in coal and fly ash samples collected from various locations in the southwestern USA. This improved digestion technique streamlines the analysis process and enhances the accuracy of REE determination, facilitating a more comprehensive evaluation of REE-rich coal and fly ash deposits for resource exploration.

58 GEOSCIENCES↗

Centrifuge Techniques and Apparatus for Transport Experiments in Porous Media

This paper describes experimental approaches and apparatus that we have developed to study solute and colloid transport in porous media using Idaho National Laboratory's 2-m radius centrifuge. The ex-perimental techniques include water flux scaling with applied acceleration at the top of the column and sub-atmospheric pressure control at the column base, automation of data collection, and remote experimental con-trol over the internet. These apparatus include a constant displacement piston pump, a custom designed liquid fraction collector based on switching valve technology, and modified moisture monitoring equipment. Suc-cessful development of these experimental techniques and equipment is illustrated through application to transport of a conservative tracer through unsaturated sand column, with centrifugal acceleration up to 40 gs. Development of such experimental equipment that can withstand high accelerations enhances the centrifuge technique to conduct highly controlled unsaturated solute/colloid transport experiments and allows in-flight liquid sample collection of the effluent.

58 GEOSCIENCES↗

Effects of dietary glucose and sodium chloride on intestinal glucose absorption of common carp (Cyprinus carpio L.)

Highlights: • Glucose absorption was primarily occurred in proximal and mid intestine in carp. • Food intake promoted SGLT1 and GLUT2 expressions, glucose transport in carp. • Dietary glucose promoted SGLT1 and GLUT2 expressions, glucose transport in carp. • Dietary NaCl enhanced SGLT1 and GLUT2 expressions, glucose transport in carp. • High-glucose diet increased while high-NaCl decreased intestinal villus height. The co-transport of sodium and glucose is the first step for intestinal glucose absorption. Dietary glucose and sodium chloride (NaCl) may facilitate this physiological process in common carp (Cyprinus carpio L.). To test this hypothesis, we first investigated the feeding rhythm of intestinal glucose absorption. Carps were fed to satiety once a day (09:00 a.m.) for 1 month. Intestinal samples were collected at 01:00, 05:00, 09:00, 13:00, 17:00 and 21:00. Result showed that food intake greatly enhanced sodium/glucose cotransporter 1 (SGLT1) and glucose transporter type 2 (GLUT2) expressions, and improved glucose absorption, with highest levels at 09:00 a.m.. Then we designed iso-nitrogenous and iso-energetic diets with graded levels of glucose (10%, 20%, 30%, 40% and 50%) and NaCl (0%, 1%, 3% and 5%), and submitted to feeding trial for 10 weeks. The expressions of SGLT1 and GLUT2, brush border membrane vesicles (BBMVs) glucose transport and intestinal villus height were determined after the feeding trial. Increasing levels of dietary glucose and NaCl up-regulated mRNA and protein levels of SGLT1 and GLUT2, enhanced BBMVs glucose transport in the proximal, mid and distal intestine. As for histological adaptive response, however, high-glucose diet prolonged while high-NaCl diet shrank intestinal villus height. Furthermore, we also found that higher mRNA levels of SGLT1 and GLUT2, higher glucose transport capacity of BBMVs, and higher intestinal villus were detected in the proximal and mid intestine, compared to the distal part. Taken together, our study indicated that intestinal glucose absorption in carp was primarily occurred in the proximal and mid intestine, and increasing levels of dietary glucose and NaCl enhanced intestinal glucose absorption in carp.

60 APPLIED LIFE SCIENCES↗

ENHANCED DENSE GAS FRACTION IN ULTRALUMINOUS INFRARED GALAXIES

We present a detailed analysis of the relation between infrared luminosity and molecular line luminosity, for a variety of molecular transitions, using a sample of 34 nearby galaxies spanning a broad range of infrared luminosities (10{sup 10} L{sub sun} < L{sub IR} < 10{sup 12.5} L{sub sun}). We show that the power-law index of the relation is sensitive to the critical density of the molecular gas tracer used, and that the dominant driver in observed molecular line ratios in galaxies is the gas density. As most nearby ultraluminous infrared galaxies (ULIRGs) exhibit strong signatures of active galactic nuclei (AGNs) in their center, we revisit previous claims questioning the reliability of HCN as a probe of the dense gas responsible for star formation in the presence of AGNs. We find that the enhanced HCN(1-0)/CO(1-0) luminosity ratio observed in ULIRGs can be successfully reproduced using numerical models with fixed chemical abundances and without AGN-induced chemistry effects. We extend this analysis to a total of 10 molecular line ratios by combining the following transitions: CO(1-0), HCO{sup +}(1-0), HCO{sup +}(3-2), HCN(1-0), and HCN(3-2). Our results suggest that AGNs reside in systems with higher dense gas fraction, and that chemistry or other effects associated with their hard radiation field may not dominate (NGC 1068 is one exception). Galaxy merger could be the underlying cause of increased dense gas fraction, and the evolutionary stage of such mergers may be another determinant of the HCN/CO luminosity ratio.

79 ASTRONOMY AND ASTROPHYSICS↗

Exfoliation and thermal transformations of Nb-substituted layered titanates

Single-layer Nb-substituted titanate nanosheets of ca. 1 nm thickness were obtained by exfoliating tetrabutylammonium (TBA)-intercalated Nb-substituted titanates in water. AFM images and turbidity measurements reveal that the exfoliated nanosheets crack and corrugate when sonicated. Upon heating, the thermal transformation into anatase and further to rutile is retarded. This suppression of the phase transition upon higher valent substitution may promote technological applications of anatase thin films, hereunder development of films with TCO properties. Depending on the oxygen partial pressure during the transformation, the Nb-substitution into TiO{sub 2} provokes different defect situations and also electronic properties. At reducing conditions, Nb is incorporated as Nb{sup V} and an equivalent amount of Ti{sup IV} is transformed to Ti{sup III} as evidenced by XPS. Magnetic susceptibility data show accordingly paramagnetic behavior. For samples heated in air Ti{sup IV} and Nb{sup V} cations prevail, the latter is compensated by cation vacancies. {sup 93}Nb MAS NMR data prove that Nb is finely dispersed into the transformed (Ti,Nb)O{sub 2} oxide matrices without sign of Nb{sub 2}O{sub 5} (nano)precipitates. The Nb-O-Ti bonds and defects at cation sites are considered key factors for increasing the transformation temperatures for conversion of the nanosheets to anatase and finally into rutile. It is further tempting to link the delay in crystallization to morphology limitations originating from the nanosheets. The present work shows that layered Nb-titanates are appropriate precursors for formation of highly oriented Nb-substituted anatase thin films via delamination, reconstruction and subsequent heat treatment. - Graphical abstract: Layered Nb-titanates are appropriate precursors for formation of highly oriented Nb-substituted anatase thin films via delamination, reconstruction and subsequent heat treatment. Highlights: Black-Right-Pointing-Pointer Single layer Nb-substituted nanosheets were obtained by exfoliation of layered titanates. Black-Right-Pointing-Pointer Nb(V) successfully introduced into anatase and rutile solid solutions. Black-Right-Pointing-Pointer Anatase obtained from reconstructed nanosheets exhibit enhanced thermal stability. Black-Right-Pointing-Pointer Oxygen partial pressure influences the valence of Nb in heat-treated samples. Black-Right-Pointing-Pointer Deposition of oriented thin Ti(Nb)O{sub 2} layers by spray coating was demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation, characterization and applications of novel carbon and nitrogen codoped TiO{sub 2} nanoparticles from annealing TiN under CO atmosphere

Graphical abstract: Carbon and nitrogen codoped TiO{sub 2} nanoparticles were firstly fabricated by calcining TiN powder under CO atmosphere at different temperatures between 400 and 600 °C, both the improved photocatalytic activity for degradation of methylene blue and enhanced photovoltaic performance for dye sensitized solar cells were demonstrated. - Highlights: • CN-codoped TiO{sub 2} nanoparticles were prepared by calcining TiN under CO atmosphere. • More visible light response was confirmed by UV–vis DRS and photocatalytic results. • Enhanced conversion efficiency was observed for the DSSCs from CN-TiO{sub 2} photoanode. • CN-codoping played an important role to improve the photocatalytic performance. - Abstract: Carbon and nitrogen codoped titania (CN-TiO{sub 2}) nanoparticles were fabricated by calcining titanium nitride (TiN) nanoparticles under carbon monoxide (CO) atmosphere at four different temperatures in a range of 400–600 °C. The as-prepared samples were characterized with X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectroscopy (XPS). Enhanced light absorption in both the UV and visible light region was observed for the resulted CN-TiO{sub 2} nanoparticles in ultraviolet-visible diffuse reflectance spectroscopy (UV–vis DRS). Improved photocatalytic activity toward the degradation of methylene blue by the CN-TiO{sub 2} nanoparticles was demonstrated under UV and visible light, respectively. The highest degradation rate was achieved for CN-TiO{sub 2} nanoparticles (13%) compared to N-TiO{sub 2} (10%) and the commercial P25 (5%) under visible light illumination for 40 min. Furthermore, the improved photocatalytic activity of CN-TiO{sub 2} was also confirmed by the degradation of colorless resorcinol under UV–vis light irradiation. Dye-sensitized solar cells (DSSCs) were fabricated using P25, N-TiO{sub 2} and CN-TiO{sub 2} photoanodes, respectively. The highest conversion efficiency of 3.31% was achieved by the DSSCs based on the CN-TiO{sub 2} photoanodes in comparison with the commercial P25 (1.61%) and N-TiO{sub 2} (2.44%) photoanodes. This work demonstrates that thermal treatment of TiN nanoparticles under CO atmosphere has shown to be a rapid, direct and clean approach to synthesize photocatalysts with enhanced photocatalytic and photovoltaic performance.

36 MATERIALS SCIENCE↗

Phase Synergy Enables Low‐Power Ferroelectric Switching in HfO 2 Epitaxial Films

HfO 2 -based ferroelectric materials have emerged as leading candidates for next-generation non-volatile memory technologies, owing to their nanoscale robust ferroelectricity and complementary metal–oxide–semiconductor (CMOS) compatibility. However, challenges and debates persist in advancing and comprehensively understanding their ferroelectric behavior. In particular, conventional approaches typically regard non-ferroelectric phases as detrimental and primarily focus on suppressing their formation, yet overlooking their potentially synergistic contributions—particularly those of the tetragonal (T) phase. Here, we unambiguously clarify the beneficial role of the T-phase and introduce a phase-boundary engineering strategy that deliberately harnesses it to enhance ferroelectricity in HfO 2 films. By stabilizing optimal coherent boundaries between ferroelectric orthorhombic (O) and T phases in epitaxial La-doped HfO 2 films, we achieve significant improvements in ferroelectric properties—doubling the remanent polarization (P r ∼ 30 µC/cm 2 ) and substantially reducing the coercive field (E c ∼ 3 MV/cm) by 30% compared to low-La doped samples without such boundaries. Atomic-scale electron microscopy reveals the structural nature of the atomically sharp, coherent O–T boundaries. Combined with deep-learning enhanced molecular dynamics simulations, our results unravel that these boundaries facilitate intermediate polarization states that lower the switching energy barrier. Consequently, phase coexistence shifts from an inherent drawback to a tunable design element, offering a broadly applicable route to ultra-low-power HfO 2 -based nanoelectronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced hybridization in the electronic ground state of the intercalated honeycomb iridate Ag 3 LiIr 2 O 6

In this work, we use x-ray spectroscopy at the Ir L 3 /L 2 absorption edge to study powder samples of the intercalated honeycomb magnet Ag 3 LiIr 2 O 6 . Based on x-ray absorption and resonant inelastic x-ray scattering measurements, and exact diagonalization calculations including nearest-neighbor Ir-Ir electron hopping integrals, we argue that the intercalation of Ag atoms results in a delocalized electronic structure with enhanced Ir-O hybridization, departing from the local relativistic j eff =1/2 state. We find that the relative orbital contribution to the magnetic moment is increased and the magnetization density is spatially extended and asymmetric in this hybridized state. Our results confirm the importance of metal-ligand hybridization in the magnetism of transition metal oxides and provide empirical guidance for understanding the collective magnetism in intercalated honeycomb iridates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of BiFeO{sub 3} for photocatalytic degradation of azo dye

A novel approach is reported to synthesize single phase BiFeO{sub 3} via. sol-gel auto combustion method using glycine as fuel. Synthesized powder was subjected to annealing at different temperatures, i.e. 400 °C, 450 °C, 500 °C, 550 °C, and 600°C. Crystal structure of BiFeO{sub 3} samples examined by X-ray diffraction indicates that the samples were single-phased with different particle sizes, as particle sizes are temperature dependent and crystallized in rhombohedral structure. As the temperature was increased, the diffraction peak intensity of BiFeO3 in the XRD spectra gradually enhanced and the diffraction peaks became sharper. The optical properties of the resultant BiFeO{sub 3} were characterized using UV-Vis spectrophotometer over the range of 350-800 nm. UV-vis spectra of all the samples indicate that optical band gap lies in the visible region in the range of 2.2-2.07 eV at all temperatures. Moreover, photocatalytic properties of the BiFeO{sub 3} powders were investigated by the photodegradation of Reactive Black-5 (RB-5)

36 MATERIALS SCIENCE↗

A novel transfer learning framework for sorghum biomass prediction using UAV-based remote sensing data and genetic markers

Yield for biofuel crops is measured in terms of biomass, so measurements throughout the growing season are crucial in breeding programs, yet traditionally time- and labor-consuming since they involve destructive sampling. Modern remote sensing platforms, such as unmanned aerial vehicles (UAVs), can carry multiple sensors and collect numerous phenotypic traits with efficient, non-invasive field surveys. However, modeling the complex relationships between the observed phenotypic traits and biomass remains a challenging task, as the ground reference data are very limited for each genotype in the breeding experiment. In this study, a Long Short-Term Memory (LSTM) based Recurrent Neural Network (RNN) model is proposed for sorghum biomass prediction. The architecture is designed to exploit the time series remote sensing and weather data, as well as static genotypic information. As a large number of features have been derived from the remote sensing data, feature importance analysis is conducted to identify and remove redundant features. A strategy to extract representative information from high-dimensional genetic markers is proposed. To enhance generalization and minimize the need for ground reference data, transfer learning strategies are proposed for selecting the most informative training samples from the target domain. Consequently, a pre-trained model can be refined with limited training samples. Field experiments were conducted over a sorghum breeding trial planted in multiple years with more than 600 testcross hybrids. The results show that the proposed LSTM-based RNN model can achieve high accuracies for single year prediction. Further, with the proposed transfer learning strategies, a pre-trained model can be refined with limited training samples from the target domain and predict biomass with an accuracy comparable to that from a trained-from-scratch model for both multiple experiments within a given year and across multiple years.

36 MATERIALS SCIENCE↗

Lattice Structured Lightweight Structural Materials

The development of lightweight structural materials is crucial for enhancing the performance and deployment feasibility of fission batteries. This study aims to produce lightweight structural materials whose strength-to-weight ratios exceed those of current widely used structural materials. To achieve this, advanced modeling and simulation tools were employed to design lattice structures with different lattice parameters and different lattice types. A process was successfully developed for transforming lattice-structured models into Multiphysics Object Oriented Simulation Environment (MOOSE) inputs. Finite element modeling (FEM) was used to simulate the uniaxial tensile testing of the lattice-structured parts to investigate the stress distribution at a given displacement. The modeling results showed that the lattice-structured sample displayed a lower Young’s modulus in comparison to the solid material; the increase in solid shell thickness and blend radius enhances the mechanical performance; and the effect of unit cell size on macro scale stress is minimal. Tensile testing was conducted on the solid and lattice-structured materials fabricated by laser powder bed fusion (LPBF) additive manufacturing. The experimental results agreed well with the model prediction. The approach of using modeling as a guiding tool for preliminary material design can significantly save time and cost for new material development.

lightweight material↗

One-step synthesis of Fe–N–S-tri-doped TiO{sub 2} catalyst and its enhanced visible light photocatalytic activity

Graphical abstract: FeNS-TiO{sub 2} exhibits stronger SPS response than that of pure TiO{sub 2}, indicating that the FeNS-TiO{sub 2} should have a higher separation rates of photoinduced charge carriers. Further, for the sample FeNS-TiO{sub 2} a broad shoulder SPS response can be seen at the wavelength range from 390 to 550 nm, suggesting that the light absorption in visible region of FeNS-TiO{sub 2} was greatly improved, which is beneficial to the enhancement of photocatalytic activity. Display Omitted Highlights: ► FeNS-TiO{sub 2} catalyst has been synthesized in the presence of ammonium ferrous sulfate. ► The light absorption edge of FeNS-TiO{sub 2} catalyst was red-shifted to visible region. ► The separation efficiency of photoinduced charge carriers of FeNS-TiO{sub 2} was improved. ► The activity enhanced mechanism of FeNS-TiO{sub 2} was discussed in detail. -- Abstract: Fe–N–S-tridoped TiO{sub 2} was synthesized through simple one step sol–gel reactions in the presence of ammonium ferrous sulfate. The resulting materials were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance spectrum and surface photovoltage spectroscopy. Results revealed that Fe and S were incorporated into the lattice of TiO{sub 2} by substituting for some Ti atoms and N for O atoms in the lattice of TiO{sub 2}. Tri-doping with Fe, N and S could inhibit the phase transformation of TiO{sub 2} from anatase to rutile, restrain the growth of crystallite sizes, extended the light absorption into the visible region and separate photoinduced charge carriers. The visible photocatalytic activity of Fe–N–S-tridoped TiO{sub 2} was higher than that of N-TiO{sub 2} and P25 TiO{sub 2}. The enhanced photocatalytic activity was attributed to the small crystallite size, high crystallinity, the intense light absorption in visible region, narrow band gap and high separation efficiency of photoinduced charge carriers.

36 MATERIALS SCIENCE↗

Germanium–Tin/Cadmium Sulfide Core/Shell Nanocrystals with Enhanced Near-Infrared Photoluminescence

Ge 1–x Sn x alloy nanocrystals and Ge 1–x Sn x /CdS core/shell nanocrystals were prepared via solution phase synthesis, and their size, composition, and optical properties were characterized. We found that the diameter of the nanocrystal samples ranged from 6 to 13 nm. Furthermore, the crystal structure of the Ge 1–x Sn x materials was consistent with a cubic diamond phase, while the CdS shell was consistent with the zinc blende polytype. Inclusion of Sn alone does not result in enhanced photoluminescence intensity; however, adding an epitaxial CdS shell onto the Ge 1–x Sn x nanocrystals does enhance the photoluminescence up to 15-fold versus that of Ge/CdS nanocrystals with a pure Ge core. There is more effective passivation of surface defects, and a consequent decrease in the level of surface oxidation, by the CdS shell as a result of improved epitaxy (smaller lattice mismatch) is the most likely explanation for the increased photoluminescence observed for the Ge 1–x Sn x /CdS materials. With enhanced photoluminescence in the near-infrared region, Ge 1–x Sn x core/shell nanocrystals might be useful alternatives to other materials for energy capture and conversion applications and as imaging probes.

36 MATERIALS SCIENCE↗

Plasmonic Nonlinear Energy Transfer Enhanced Second Harmonic Generation Nanoscopy

Nonlinear optical response is a fingerprint of various physicochemical properties of materials related to symmetry, including crystallography, interfacial configuration, and carrier dynamics. However, the intrinsically weak nonlinear optical susceptibility and the diffraction limit of far-field optics restrict probing deep-subwavelength-scale nonlinear optics with measurable signal-to-noise ratio. Here, we propose an alternative approach toward efficient second harmonic generation (SHG) nanoscopy for SHG-active sample (zinc oxide nanowire; ZnO NW) using an SHG-active plasmonic nanotip. Our full-wave simulation suggests that the experimentally observed high near-field SHG contrast is possible when the nonlinear response of ZnO NW is enhanced and/or that of the tip is suppressed. Here, this result suggests possible evidence of quantum mechanical nonlinear energy transfer between the tip and the sample, modifying the nonlinear optical susceptibility. Further, this process probes the nanoscale corrosion of ZnO NW, demonstrating potential use in studying various physicochemical phenomena in nanoscale resolution.

36 MATERIALS SCIENCE↗

Effect of Gd substitution on the structure and magnetic properties of YFeO{sub 3} ceramics

High quality Gd-doped YFeO{sub 3} polycrystalline samples were synthesized by solid-state reaction method. The crystal structure of the samples can be described by the space group of Pbnm (No. 62). {sup 57}Fe Moessbauer spectra show that only the high spin Fe{sup 3+} exists and the samples are magnetic ordering at room temperature. The spontaneous magnetization at room temperature was observed and the paramagnetic contribution from Gd{sup 3+} ions was confirmed by the significant enhancement of the magnetization. Temperature-dependent magnetization data correlate with the Gd concentration x and follow the Curie-Weiss law above the ferromagnetic transition temperature. Magnetic measurements suggest that the substitution of Y{sup 3+} ions by Gd{sup 3+} ions effectively enhance the magnetization of YFeO{sub 3}. This is achieved by the additional Gd-Gd interactions, Gd-Fe interactions and the variation of Fe-O-Fe superexchange bond caused by distortion of the crystal structure. - Graphical abstract: The crystallographic structure of YFeO{sub 3} and the magnetic hysteresis loops of Y{sub 1-x}Gd{sub x}FeO{sub 3} (x=0, 0.1, 0.5, and 1) samples at room temperature. Highlights: Black-Right-Pointing-Pointer Y{sub 1-x}Gd{sub x}FeO{sub 3} (0{<=}x{<=}1) ceramics were synthesized by solid state reaction method. Black-Right-Pointing-Pointer Y{sub 1-x}Gd{sub x}FeO{sub 3} (0{<=}x{<=}1) samples are ferromagnetic ordering at room temperature. Black-Right-Pointing-Pointer Results of {sup 57}Fe Moessbauer spectra are typical for Fe{sup 3+} high spin state. Black-Right-Pointing-Pointer Substitution of Y{sup 3+} ions by Gd{sup 3+} ions enhances the magnetization of YFeO{sub 3} obviously.

36 MATERIALS SCIENCE↗