Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

High-Resolution OH and CH2O Visualization in a Premixed Cavity-Anchored Ethylene-Air Flame in a M = 0.6 Flowfield

OH and CH2O were imaged in a premixed, cavity-anchored, ethylene-air turbulent flame using a high resolution planar laser-induced fluorescence (PLIF) system. The electrically-heated, continuous flow facility (UVa Supersonic Combustion Facility, Configuration E) consisted of a Mach 2 nozzle, an isolator with fuel injectors, a test section with a cavity flame holder and optical access, and an extender. Standard test conditions comprised total temperature 1200 K, total pressure 300 kPa, local equivalence ratio near 0.4, and local Mach number near 0.6. OH PLIF data was also collected for a case with reduced total temperature and another with reduced equivalence ratio. OH and CH2O were excited in separate experiments with light sheets at 283.55 nm and 352.48 nm, respectively. A light sheet of approximate thickness 25 ?m illuminated the stream-wise midplane. This plane was imaged for 120 mm downstream of the backward-facing step. The intensified camera system imaged OH with magnification 1.97, a square 6.67 mm field of view, and in-plane resolution of 39 ?m. The smallest observed OH structures observed were approximately 100 ?m wide. The CH2O PLIF image signal was much weaker; the smallest observed structures were approximately 200 ?m wide. Composite fluorescence images were computed for the observed area.

Geipel, Clayton M.↗

Climate and Fuel Controls on North American Paleofires: Smoldering to Flaming in the Late-Glacial-Holocene Transition

Smoldering and flaming fires, which emit different proportions of organic (OC) and black carbon (BC, in the form of char and soot), have long been recognized in modern wildfire observations but never in a paleo-record, and little is known about their interactions with climate. Here we show that in the late glacial-early Holocene transition period, when the climate was moist, relatively high quantities of char were deposited in Linsley Pond, Connecticut, USA while soot was more abundant during the warmer and drier early Holocene interval. The highest soot mass accumulation rates (MARs) occurred at the beginning of the Holocene as fuel availability increased through the climatic transition when boreal forests were locally extirpated. These variations with time are related to the different formation pathways of char and soot, which are governed by combustion efficiency. This study provides an approach for differentiating smoldering from flaming combustion in paleo-wildfire reconstructions. Our results suggest that climate and fuel loads control the occurrence of different wildfire types and precipitation may play a key role.

Han, Y. M.↗

Area Monitoring for Detection of Leaks And/Or Flames

A solution for monitoring an area for the presence of a flame and/or a leak, such as from a pressurized fluid, is provided. An imaging device can be used that acquires image data based on electromagnetic radiation having wavelengths only corresponding to at least one region of the electromagnetic spectrum in which electromagnetic radiation from an ambient light source is less than the electromagnetic radiation emitted by at least one type of flame for which the presence within the area is being monitored. An acoustic device can be used that is configured to acquire acoustic data for the area and enhance acoustic signals in a range of frequencies corresponding to a leak of a pressurized fluid present in the area.

Mian, Zahid F.↗

Turbulent flame speeds and NOx kinetics of HHC fuels with contaminants and high dilution levels

This progress report documents the second year of the project, from October 1, 2011 through September 30, 2012. Characterization of the new turbulent flame speed vessel design was completed. Turbulence statistics of three impellers with different geometric features were measured using particle image velocimetry inside a Plexiglas model (~1:1 scale) of a cylindrical flame speed vessel (30.5 cm ID × 35.6 cm L). With four impellers arranged in a central-symmetric configuration, turbulence intensities between 1.2 and 1.7 m/s with negligible mean flow (0.1u´) were attained at the lowest fan speeds. Acceptable ranges for homogeneity and isotropy ratios of the velocity fields were set within a narrow bandwidth near unity (0.9-1.1). Homogeneity ratios were unaffected by changes to the impeller geometry, and the prototype with the higher number of blades caused the flow to become anisotropic. The integral length scale of the flow fields varied between 27 and 20 mm, which correlates well with those typically observed inside a gas turbine combustor. The mechanism to independently vary the intensity level and the integral length scale was established, where turbulence intensity level was dependent on the rotational speed of the fan, and the integral length scale decreased with increasing blade pitch angle. Ignition delay times of H₂/O₂ mixtures highly diluted with Ar and doped with various amounts of N₂O (100, 400, 1600, 3200 ppm) were measured in a shock tube behind reflected shock waves over a wide range of temperatures (940-1675 K). The pressure range investigated during this work (around 1.6, 13, and 30 atm) allows studying the effect of N₂O on hydrogen ignition at pressure conditions that have never been heretofore investigated. Ignition delay times were decreased when N₂O was added to the mixture only for the higher nitrous oxide concentrations, and some changes in the activation energy were also observed at 1.5 and 30 atm. When it occurred, the decrease in the ignition delay time was proportional to the amount of N₂O added and depended on pressure and temperature conditions. A detailed chemical kinetics model was developed using kinetic mechanisms from the literature. This model predicts well the experimental data obtained during this study and from the literature. The chemical analysis using this model showed that the decrease in the ignition delay time was mainly due to the reaction N₂O +M ⇌ N₂ + O +M which provides O atoms to strengthen the channel O + H₂ ⇌ OH + H. Ignition delay times have been measured behind reflected shock waves at 1.5, 12 and 30 atm for a mixture representative of a syngas produced from biomass (0.29659% CO / 0.29659% H₂ / 0.15748% CO₂ / 0.08924% CH₄ / 0.20997% H₂O / 0.95013% O₂ in 98% Ar (mol.%)) and for the same biomass-derived syngas mixture doped with 200 ppm of NH₃. The importance of the various constituents on the ignition delay time was investigated by comparing the results with data from various baseline mixtures (H₂/O₂/Ar, H₂/CO/O₂/Ar and H₂/CO/O₂/Ar with one of the other constituent of the syngas (i.e. CO₂, H₂O, CH₄ or NH₃)). The equivalence ratio was set to 0.5 during this study. Several recent detailed kinetics mechanisms from the literature were computed against these data, with fair agreement. Results showed that the mixture composition can have an important effect on the ignition delay time, with most of the effect being due to CH₄ addition through the reaction CH₄+OH⇌CH₃+H₂O. The ammonia impurity had very little effect on the ignition delay time over the range of conditions studied.

Petersen, Eric↗

Ignition, Flame Progation, and End-Gas Autoignition Studies of Natural Gas/ EGR Blends in a Rapid Compression Machine

The development of high efficiency, spark ignited natural gas engines is currently limited by engine knock at high power density (at high compression ratio and/or elevated boost pressures) and misfire (at lean conditions and/or high exhaust gas recirculation levels). The knock and misfire limits are further confounded by the wide variety in fuel reactivity observed in “pipeline quality” natural gas. In this study, a rapid compression machine (RCM) was used to characterize the effects of variation in natural gas fuel reactivity and exhaust gas recirculation (EGR) on homogeneous ignition delay, flame propagation rate and end-gas autoignition (EGAI) propensity for stoichiometric natural gas/oxidizer/EGR blends. Pipeline quality natural gas with variable reactivity (68 < Methane Number < 95) was simulated using mixtures of methane, ethane, and propane. EGR was simulated with mixtures of Ar, CO2, CO, and NO. EGR substitution rates were varied from 0 to 30 mass percent. Ignition delay period under homogeneous autoignition conditions was measured at compressed pressures of 24.0 to 33.1 bar and compressed temperatures of 667 to 980 K. Flame propagation rate and EGAI propensity was measured at spark-ignition pressures of 29.9 to 32.9 bar and temperatures of 721 to 782 K.

Mohr, Jeffrey↗

DNS of a Simplified Gas Turbine Premixer: Auto-Ignition and Flame Stabilization

With the increasing need for fuel-flexibility, an understanding of auto-ignition inside gas turbine premixers is crucial. Direct numerical simulation (DNS) is a great tool to reveal the fine grain details of physics inside the premixer and guide the choice of the models to use for less expensive simulations. We present numerical simulations of a simplified and downscaled premixer, with multiple air jets in rich fuel crossflow. The simulations show intense fuel-air mixing and flame-turbulence interaction. We examine flow acceleration by the incoming jets, and the combustion within the device. We observe low-temperature and high-temperature combustion signatures, and compute the flame index to quantify local stabilization modes.

combustion↗

In-Situ Species Concentration Measurements in Ammonia-Mix Flames Using FTIR Spectroscopy

Hydrogen and ammonia represent two carbon-free fuel sources that could be used in place of current fossil energy sources in combustion systems. To develop optimized ammonia combustion systems, validated modeling tools are needed. In the open literature, it has been shown that the complex chemistry associated with fuel-bound nitrogen contained in ammonia differs greatly from natural gas or hydrogen combustion. As a result, several new chemical kinetic mechanisms have been developed. Many of these mechanisms have been validated experimentally, however this has primarily focused on bulk parameters such as laminar flame speed and ignition delay time. Critically, high quality measurements of species concentrations are needed under controlled conditions which are easily represented by simple models. In this paper, direct, in-situ measurements of species concentrations and gas temperature are performed in a laminar flat-flame burner. This arrangement enables comparison with 1D model predictions, better isolating chemical kinetics from the fluid dynamics. Quantitative species concentrations are determined by absorption spectroscopy using an FTIR spectrometer. Fuel compositions representative of cracked ammonia (NH3/H2) and ammonia-natural gas (NH3/CH4) are considered for rich and lean equivalence ratios. A major focus of the paper is on the selection of spectral features for nitric oxide and ammonia and correcting for large amounts of baseline H2O absorption.

Bedick, Clinton↗

The Sensitivity of Chemical Kinetic Models on Flame Transfer Functions in High Frequency Acoustic Fluctuation Environments

This paper investigates how different chemical kinetics models are able to capture the dynamics of laminar premixed methane/air flames. In particular, this paper computes flame transfer functions and compares the performance of different global kinetic models as well as detailed kinetic models. This is accomplished using a sequence of one-dimensional incompressible simulations implemented in OpenFOAM. The detailed GRI Mech 3.0 is used as a baseline for comparison. Detailed kinetic analysis will be conducted to understand the underlying kinetics-dynamics coupling.

Girdhar, Anant↗

Combined TDLAS and chemiluminescence imaging in a flat flame burner operated with NH3/H2 blends

Ammonia is a promising hydrogen carrier due to its favorable storage and transport characteristics. However, its direct use in combustion systems is limited by low flammability and potential for high nitrogen oxide emissions. To better understand ammonia combustion, researchers conducted experiments using a flat flame burner and measured species profiles using tunable-diode-laser-absorption-spectroscopy and chemiluminescence imaging. They tested three flame conditions with different ammonia-hydrogen blends and oxygen levels. The results were compared to simulations using various kinetic mechanisms, including one that accounts for excited species chemistry. The goal is to provide direct information about species profiles in a simple system, isolating chemical kinetics from fluid dynamic effects, which can inform the development of more efficient and low-emission combustion systems using ammonia.

ammonia combustion↗

Scalar filtered mass density functions in nonpremixed turbulent jet flames

Filtered mass density functions (FMDFs) of mixture fraction and temperature are studied by analyzing experimental data obtained from one-dimensional Raman/Rayleigh/LIF measurements of nonpremixed CH{sub 4}/H{sub 2}/N{sub 2} turbulent jet flames at Reynolds numbers of 15,200 and 22,800 (DLR-A and -B). The experimentally determined FMDFs are conditioned on the Favre filtered values of the mixture fraction and its variance. Filter widths are selected as fixed multiples of the experimentally determined dissipation length scale at each measurement location. One-dimensional filtering using a top-hat filter is performed to obtain the filtered variables used for conditioning. The FMDFs are obtained by binning the mass and filter kernel weighted samples. Emphasis is placed on the shapes of the FMDFs in the fuel-rich, fuel-lean, and stoichiometric intervals for the Favre filtered mixture fraction, and low, medium, and high values for the Favre filtered mixture fraction variance. It is found that the FMDFs of mixture fraction are unimodal in samples with low mixture fraction variance and bimodal in samples with high variance. However, the FMDFs of mixture fraction at the smallest filter size studied are unimodal for all values of the variance. The FMDFs of temperature are unimodal in samples with low mixture fraction variance, and either unimodal or bimodal, depending on the mixture fraction mean, in samples with high variance. The influence of the filter size and the jet Reynolds number on the FMDFs is also considered. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A numerical study of soot aggregate formation in a laminar coflow diffusion flame

Soot aggregate formation in a two-dimensional laminar coflow ethylene/air diffusion flame is studied with a pyrene-based soot model, a detailed sectional aerosol dynamics model, and a detailed radiation model. The chemical kinetic mechanism describes polycyclic aromatic hydrocarbon formation up to pyrene, the dimerization of which is assumed to lead to soot nucleation. The growth and oxidation of soot particles are characterized by the HACA surface mechanism and pyrene-soot surface condensation. The mass range of the solid soot phase is divided into thirty-five discrete sections and two equations are solved in each section to model the formation of the fractal-like soot aggregates. The coagulation model is improved by implementing the aggregate coagulation efficiency. Several physical processes that may cause sub-unitary aggregate coagulation efficiency are discussed. Their effects on aggregate structure are numerically investigated. The average number of primary soot particles per soot aggregate n{sub p} is found to be a strong function of the aggregate coagulation efficiency. Compared to the available experimental data, n{sub p} is well reproduced with a constant 20% aggregate coagulation efficiency. The predicted axial velocity, OH mole fraction, and C{sub 2}H{sub 2} mole fraction are validated against experimental data in the literature. Reasonable agreements are obtained. Finally, a sensitivity study of the effects of particle coalescence on soot volume fraction and soot aggregate nanostructure is conducted using a coalescence cutoff diameter method. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relevance of the Bray number in the small-scale modeling of turbulent premixed flames

The present study is devoted to the analysis of the influence of expansion phenomena on turbulent small scales in premixed reactive flows. It is shown that, under certain conditions, the expansion that takes place across wrinkled laminar flamelet can be sufficient to control the fluctuating velocity gradients and associated dissipation rate functions. These conditions are fixed by the respective values of a set of nondimensional parameters, namely the turbulence Reynolds number Re{sub T}, the Bray number, and the ratio between integral length scale of turbulence and thermal flame front thickness. A new criterion is introduced that makes it possible to delineate the influence of expansion phenomena on small-scale turbulent premixed reactive flows. The relevance of this criterion is analyzed in the light of experimental results represented in the classical diagram of combustion regime. The present analysis confirms that special care is required to represent and include the influence of expansion phenomena when using either RANS or LES closures to model turbulent premixed combustion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of soot, OH, and PAH concentrations in turbulent ethylene/air jet flames

This paper presents results from an investigation of soot formation in turbulent, non-premixed, C{sub 2}H{sub 4}/air jet flames. Tests were conducted using a H{sub 2}-piloted burner with fuel issuing from a 2.18 mm i.d. tube into quiescent ambient air. A range of test conditions was studied using the initial jet velocity (16.2-94.1 m/s) as a parameter. Fuel-jet Reynolds numbers ranged from 4000 to 23,200. Planar laser-induced incandescence (LII) was employed to determine soot volume fractions, and laser-induced fluorescence (LIF) was used to measure relative hydroxyl radical (OH) concentrations and polycyclic aromatic hydrocarbons (PAHs) concentrations. Extensive information on the structure of the soot and OH fields was obtained from two-dimensional imaging experiments. Quantitative measurements were obtained by employing the LII and LIF techniques independently. Imaging results for soot, OH, and PAH show the existence of three soot formation/oxidation regions: a rapid soot growth region, in which OH and soot particles lie in distinctly different radial locations; a mixing-dominated region controlled by large-scale motion; and a soot-oxidation region in which the OH and soot fields overlap spatially, resulting in the rapid oxidation of soot particles. Detailed quantitative analyzes of soot volume fractions and OH and soot zone thicknesses were performed along with the temperature measurement using the N{sub 2}-CARS system. Measurements of OH and soot zone thicknesses show that the soot zone thickness increases linearly with axial distance in the soot formation region, whereas the OH zone thickness is nearly constant in this region. The OH zone thickness then rapidly increases with downstream distance and approximately doubles in the soot-oxidation region. Probability density functions also were obtained for soot volume fractions and OH concentrations. These probability density functions clearly define the spatial relationships among the OH, PAH concentrations, the soot formation, and oxidation processes. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of multi-scale oscillation of laminar lifted flames with low-frequency AC electric fields

The oscillation behavior of laminar lifted flames under the influence of low-frequency AC has been investigated experimentally in coflow jets. Various oscillation modes were existed depending on jet velocity and the voltage and frequency of AC, especially when the AC frequency was typically smaller than 30 Hz. Three different oscillation modes were observed: (1) large-scale oscillation with the oscillation frequency of about 0.1 Hz, which was independent of the applied AC frequency, (2) small-scale oscillation synchronized to the applied AC frequency, and (3) doubly-periodic oscillation with small-scale oscillation embedded in large-scale oscillation. As the AC frequency decreased from 30 Hz, the oscillation modes were in the order of the large-scale oscillation, doubly-periodic oscillation, and small-scale oscillation. The onset of the oscillation for the AC frequency smaller than 30 Hz was in close agreement with the delay time scale for the ionic wind effect to occur, that is, the collision response time. Frequency-doubling behavior for the small-scale oscillation has also been observed. Possible mechanisms for the large-scale oscillation and the frequency-doubling behavior have been discussed, although the detailed understanding of the underlying mechanisms will be a future study. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiple mapping conditioning of velocity in turbulent jet flames

Multiple mapping conditioning (MMC) has emerged as a new approach to model turbulent reacting flows. This study revises the standard MMC closure for velocity in turbulent jet flows from linearity in the reference space to linearity in the composition space. This modeling amendment ensures that the standard velocity model in conditional moment closure studies can now be used for MMC computation as well. A simplified model for the velocity-dependence of MMC drift coefficients is derived without loss of generality and is implemented for the revised velocity closure. Modeling results have been corroborated against the Direct Numerical Simulation database of a spatially evolving, planar turbulent jet flame. The revised model shows marked improvement over standard MMC closure in predicting velocity statistics close to the nozzle. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular diffusion effects in LES of a piloted methane-air flame

Molecular diffusion effects in LES of a piloted methane-air (Sandia D) flame are investigated on a series of grids with progressively increased resolution. The reacting density, temperature and chemical composition are modeled based on the mixture fraction approach combined with a steady flamelet model. With a rationale to minimize interpolation uncertainties that are routinely introduced by a flamelet table look-up, quadratic splines relationships are employed to represent thermochemical variables. The role of molecular diffusivity in effecting spatial transport is studied by drawing a comparison with the turbulent diffusivity and analyzing their statistics conditioned on temperature. Statistical results demonstrate that the molecular diffusivity in the near-field almost always exceeds the turbulent diffusivity, except at low temperatures (less than 500 K). Thus, by altering the jet near-field, molecular transport plays an important role in the further downstream jet development. Molecular diffusivity continues to dominate in the centerline region throughout the flow field. Overall, the results suggest the strong necessity to represent molecular transport accurately in LES studies of turbulent reacting flows. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study on premixed combustion in cylindrical micro combustors: Transient flame behavior and wall heat flux

The micro combustor is a key component of the micro thermophotovoltaic (TPV) system. Improving the wall temperature of the micro combustor is an effective way to elevate the system efficiency. An experimental study on the wall temperature and radiation heat flux of a series of cylindrical micro combustors (with a backward-facing step) was carried out. For the micro combustors with d = 2 mm, the regime of successful ignition (under the cold wall condition) was identified for different combustor lengths. Acoustic emission was detected for some cases and the emitted sound was recorded and analyzed. Under the steady-state condition, the effects of the combustor diameter (d), combustor length (L), flow velocity (u{sub 0}) and fuel-air equivalence ratio ({phi}) on the wall temperature distribution were investigated by measuring the detailed wall temperature profiles. In the case that the micro combustor is working as an emitter, the optimum efficiency was found at {phi} {approx} 0.8, independent of the combustor dimensions (d and L) and the flow velocity. Under the experimental conditions employed in the present study, the positions of the peak wall temperature were found to be about 8-11 mm and 4-6 mm from the step for the d = 3 mm and d = 2 mm micro combustors, respectively, which are 8-11 and 8-12 times of their respective step heights. This result suggests that the backward-facing step employed in the combustor design is effective in stabilizing the flame position. (author)

30 DIRECT ENERGY CONVERSION↗

A detailed kinetic modeling study of toluene oxidation in a premixed laminar flame

An improved chemical kinetic model for the toluene oxidation based on experimental data obtained in a premixed laminar low-pressure flame with vacuum ultraviolet (VUV) photoionization and molecular beam mass spectrometry (MBMS) techniques has been proposed. The present mechanism consists of 273 species up to chrysene and 1740 reactions. The rate constants of reactions of toluene, decomposition, reaction with oxygen, ipso-additions and metatheses with abstraction of phenylic H-atom are updated; new pathways of C{sub 4} + C{sub 2} species giving benzene and fulvene are added. Based on the experimental observations, combustion intermediates such as fulvenallene, naphtol, methylnaphthalene, acenaphthylene, 2-ethynylnaphthalene, phenanthrene, anthracene, 1-methylphenanthrene, pyrene and chrysene are involved in the present mechanism. The final toluene model leads to an overall satisfactory agreement between the experimentally observed and predicted mole fraction profiles for the major products and most combustion intermediates. The toluene depletion is governed by metathese giving benzyl radicals, ipso-addition forming benzene and metatheses leading to C{sub 6}H{sub 4}CH{sub 3} radicals. A sensitivity analysis indicates that the unimolecular decomposition via the cleavage of a C-H bond has a strong inhibiting effect, while decomposition via C-C bond breaking, ipso-addition of H-atom to toluene, decomposition of benzyl radicals and reactions related to C{sub 6}H{sub 4}CH{sub 3} radicals have promoting effect for the consumption of toluene. Moreover, flow rate analysis is performed to illustrate the formation pathways of mono- and polycyclic aromatics.

30 DIRECT ENERGY CONVERSION↗