Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel cladding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Performance of U 3 Si 2 in an LWR following a cladding breach during normal operation

High-density fuels have been proposed as a possible replacement for uranium-dioxide as a fuel for light water reactors (LWRs) due to their increased loading of fissionable material. The objectives of this proposal are (1) to increase reactor cycle length and reactor power, and (2) to offset any neutronic penalty associated with advanced cladding systems. Of the high-density fuels under consideration, there is particular interest in triuranium disilicide (U 3 Si 2 ) due to its increased metal density and favorable thermal properties as compared to UO 2 . However, there are concerns regarding the chemical compatibility of U 3 Si 2 with water and steam as used for LWR coolant.This paper summarizes research on fuel-coolant chemical compatibility for UO 2 LWR fuel during a cladding breach and highlights that generally, because of its chemical inertness, UO 2 -coolant reactions are of little consequence to reactor operation. However, the volumetric expansion associated with the reaction of UO 2 and oxygen is a concern for possible conditions encountered during air ingress of dry storage. These same concerns arise for U 3 Si 2 , which exhibits greater volumetric expansion than UO 2 when exposed to water or steam. These reactions ultimately result in increased fuel volume that the cladding must accommodate, as well as additional heat generated as the fuel reacts.The BISON fuel performance code was used to perform a comparative analysis on the behavior of UO 2 and U 3 Si 2 under normal operation. Silicide fuel simulations were then extended to demonstrate how varying thermodynamic and chemical kinetics influence fuel expansion and subsequent cladding performance during a cladding breach. These simulations were further extended to a 3D subsection of a fuel rod to demonstrate the characteristics of the resulting cladding crack.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

New developments in ALCYONE 2.0 fuel performance code

ALCYONE is a multi-dimensional (1D, 2D or 3D) fuel performance code dedicated to pressurized water reactors (PWR). This code is co-developed in the PLEIADES platform by CEA, EDF and AREVA and simulates fuel pellets and cladding evolutions during base irradiation, power ramps and accidental situations. Sophisticated chemical and physical models are used. The thermal and mechanical behavior is solved with the finite element method based code CAST3M. ALCYONE 2.0 is the next release of the code and it includes several new features: improvements in incidental and accidental situations modeling, new models available for 2D and 3D schemes and an evolution of neutron model to simulate gadolinium fuel. ALCYONE 2.0 uses a new version of PLEIADES platform which allows the parallelized computation of rod axial slices in order to decrease computation times. To better simulate accidental situations, an axial transfer model for gases and a modeling of heaters for Loss Of Coolant Accident (LOCA) experiments have been added to the code. The axial transfer model can simulate an axial internal pressure gradient in the fuel rod. For power ramps simulations in the 1D scheme, a new model for dish filling is available. This version will be validated on more than 400 rods covering a wide range of irradiation conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Post-irradiation characterization of a high burnup mixed oxide fuel rod with minor actinides

The Advanced Fuels Campaign performed a series of irradiation tests of minor actinide-bearing mixed oxide fuel (MA-MOX), the so-called AFC-2C&D experiments, to investigate the transmutation of long-lived transuranic actinide isotopes contained in spent nuclear fuel via fast reactor technology at burnups exceeding 10 % fission of initial metallic atoms. This manuscript reports the test results derived from one of the five MA-MOX rodlets taken to higher burnup in the AFC-2D irradiation. This includes both non-destructive investigations, such as gamma and neutron spectrometry, and destructive investigations, such as fission gas release, ceramography, and chemical burnup analysis. In addition, the microstructure of the fuel was investigated using advanced electron microscopy techniques including electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). Here, it was observed with EBSD that the pellet had subdivision of the grains and the TEM observed migration of cladding material into the 5 metal precipitates in the fuel which could have been from the higher than desired oxygen/metal ratio. The TEM also showed an enrichment of Cr in fuel clad chemical interaction (FCCI) layer.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparisons of Peak Cladding Temperature and Effective Thermal Conductivity: CFD Simulation on PWR Spent Fuel Assemblies - 16278

When spent fuel assemblies from the reactor of nuclear power plants (NPPs) are transported or stored, the assemblies are exposed to a variety of environments that can affect the peak cladding temperature of spent fuel assemblies. There are four methods to calculate the peak cladding temperature of spent fuel assemblies in a cask: Manteufel and Todreas's two-region model, Bahney Lotz's effective thermal conductivity model, Wooton-Epstein correlation, and computational fluid dynamics (CFD) simulation. The CFD simulation based on the FLUENT code is used to calculate the peak cladding temperature and effective thermal conductivity of a spent fuel assemblies used in Republic of Korea NPPs: 14x14, 16x16 ACE7, 16x16 PLUS7 and 17x17 PWR spent fuel assemblies. The CFD simulation results show that the effective thermal conductivity of the 16x16 ACE7 was more conservative than those for the other assemblies. Therefore the effective thermal conductivity using 16x16 ACE7 is used for thermal evaluation of the KORAD's developing cask which can load 14x14, 16x16 ACE7, 16x16 PLUS7 and 17x17 spent fuel assembly. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fabrication of fuel pin assemblies, phase 3

Five full size and eight reduced length fuel pins were fabricated for irradiation testing to evaluate design concepts for a fast spectrum lithium cooled compact space power reactor. These assemblies consisted of uranium mononitride fuel pellets encased in a T-111 (Ta-8W-2Hf) clad with a tungsten barrier separating fuel and clad. Fabrication procedures were fully qualified by process development and assembly qualification tests. Detailed specifications and procedures were written for the fabrication and assembly of prototype fuel pins.

Keeton, A. R.↗

Consideration of alternative coolants in AGR-like FHR designs

Replacing carbon-dioxide coolant in AGR-like reactor with molten salt significantly affects the reactor performance characteristics. Hence, a new core design is needed. In this work, a Multi-Objective Particle Swarm Optimisation is used to identify the most favourable configurations for a new system layout. The performed analysis examines each configuration with respect to its thermal-hydraulic performance to assess the power uprate potential which is limited by multiple temperature constraints (e.g. fuel centreline and cladding temperatures as well as the coolant freezing/boiling). The estimated maximum power was then used in the fuel burnup calculations, from which a discharge burnup and cycle average Coolant Temperature Coefficients (CTC) were obtained. As a result of the optimisation process, several families of possible solutions were identified, which form an optimal Pareto Front. The most attractive configurations in terms of achievable power density, however, were not necessarily on the Pareto front. Several coolant options are examined and compared in this paper. The newly identified design options have the potential to achieve power density that is higher than that of a typical AGR by up to a factor of five while maintaining negative CTC through the burnup cycle. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Validation of advanced in-pin metallic fuel models of SAS4A

The SAS4A safety analysis code has been extended to include mechanistic and physics-based models of U-Pu-Zr and U-Zr metallic fuel pins. The predictions of the code for various phenomena such as fission gas behavior, clad wastage formation, thermal expansion, creep, and gas swelling induced axial fuel relocation, in-pin molten fuel ejection, and clad failure models have been significantly improved. The paper presents the validation effort of the new code using the results of eight sets of TREAT MSeries overpower experiments, prior to clad failure. Fuel axial expansion reactivity and clad failure behavior was benchmarked. The results show that the code predictions are satisfactory. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Laser Shockwave Technique For Characterization Of Nuclear Fuel Plate Interfaces

The US National Nuclear Security Agency is tasked with minimizing the worldwide use of high-enriched uranium. One aspect of that effort is the conversion of research reactors to monolithic fuel plates of low-enriched uranium. The manufacturing process includes hot isostatic press bonding of an aluminum cladding to the fuel foil. The Laser Shockwave Technique (LST) is here evaluated for characterizing the interface strength of fuel plates using depleted Uranium/Mo foils. LST is a non-contact method that uses lasers for the generation and detection of large amplitude acoustic waves and is therefore well adapted to the quality assurance of this process. Preliminary results show a clear signature of well-bonded and debonded interfaces and the method is able to classify/rank the bond strength of fuel plates prepared under different HIP conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Redwing: A MOOSE application for coupling MPACT and BISON

Fuel performance and whole core neutron transport programs are often used to analyze fuel behavior as it is depleted in a reactor. For fuel performance programs, internal models provide the local intra-pin power density, fast neutron flux, burnup, and fission rate density, which are needed for a fuel performance analysis. The fuel performance internal models have a number of limitations. These include effects on the intra-pin power distribution by nearby assembly elements, such as water channels and control rods, and the further limitation of applicability to a specified fuel type such as low enriched UO2. In addition, whole core neutron transport codes need an accurate intra-pin temperature distribution in order to calculate neutron cross sections. Fuel performance simulations are able to model the intra-pin fuel displacement as the fuel expands and densifies. These displacements must be accurately modeled in order to capture the eventual mechanical contact of the fuel and the clad; the correct radial gap width is needed for an accurate calculation of the temperature distribution of the fuel rod. Redwing is a MOOSE-based application that enables coupling between MPACT and BISON for transport and fuel performance coupling. MPACT is a 3D neutron transport and reactor core simulator based on the method of characteristics (MOC). The development of MPACT began at the University of Michigan (UM) and now is under the joint development of ORNL and UM as part of the DOE CASL Simulation Hub. MPACT is able to model the effects of local assembly elements and is able calculate intra-pin quantities such as the local power density on a volumetric mesh for any fuel type. BISON is a fuel performance application of Multi-physics Object Oriented Simulation Environment (MOOSE), which is under development at Idaho National Laboratory. BISON is able to solve the nonlinearly coupled mechanical deformation and heat transfer finite element equations that model a fuel element as it is depleted in a nuclear reactor. Redwing couples BISON and MPACT in a single application. Redwing maps and transfers the individual intra-pin quantities such as fission rate density, power density, and fast neutron flux from the MPACT volumetric mesh to the individual BISON finite element meshes. For a two-way coupling Redwing maps and transfers the individual pin temperature field and axially dependent coolant densities from the BISON mesh to the MPACT volumetric mesh. Details of the mapping are given. Redwing advances the simulation with the MPACT solution for each depletion time step and then advances the multiple BISON simulations for fuel performance calculations. Sub-cycle advancement can be applied to the individual BISON simulations and allows multiple time steps to be applied to the fuel performance simulations. Currently, only loose coupling where data from a previous time step is applied to the current time step is performed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Investigating Accident Tolerant Fuel Concepts using the BISON Fuel Performance Code

There has been an increased interest in research of accident tolerant fuels (ATF) and claddings for use in commercial reactors ever since the events that occurred at the Fukushima Daiichi nuclear power plant in 2011. The economic impact of these events on the nuclear energy sector is significant. As a result, the United States Department of Energy's Office of Nuclear Energy accelerated research in nuclear fuel concepts with enhanced accident tolerance as part of its Fuel Cycle Research and Development (FCRD) Advanced Fuels Campaign (AFC). A report produced by the AFC entitled Light Water Reactor Accident Tolerant Fuel Performance Metrics outlines a set of metrics that can be used to guide selection of promising ATF concepts. Moreover, the report specifies that a down-selection is to occur in the 2016-2017 time frame, at which time the program will move from a proof-of-concept to a proof-of-principle stage with continued research and development into a small set of concepts. Given the time necessary for comprehensive irradiation experiments and post-irradiation examination, it is impossible to perform a complete set of experiments for material characterization. Therefore, the AFC is utilizing computational analysis tools in an effort to understand the proposed materials under a variety of normal operating and accident conditions. For some time, the DOE's Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has been developing computational analysis tools for nuclear fuel simulation. These codes include BISON and Marmot which investigate fuel behavior at the continuum and microstructural scales, respectively. In 2014, NEAMS introduced what it calls High Impact Problems (HIPs) into its program plan. These HIPs are intended to make significant advancements in a particular area of nuclear power research in a short period of time (3 years or less). NEAMS has chosen an ATF project, which emphasizes utilizing BISON and Marmot to model proposed materials, as its first HIP. This summary focuses on the methodology being utilized for investigation of ATF concepts using the BISON fuel performance code. First, we give an overview of the model development for two candidate ATF materials, FeCrAl for cladding and uranium silicide (U{sub 3}Si{sub 2}) for fuel. Then, we present the approach for deciding which simulations are necessary given the importance of such simulations in providing a detailed report into the fuel performance behavior of these materials by the conclusion of the HIP. In absence of experimental data and given the aggressive schedule outlined by the AFC for ATF research and development, computational analysis tools are required. These tools are being used to help guide experiment design and to perform bounding and sensitivity studies to gain valuable information for which experimental data is limited. In support of this effort, models have been incorporated into BISON for simulation of U{sub 3}Si{sub 2} and FeCrAl. Continued material model development and engineering analysis will help address questions related to the performance of these ATF materials under normal operating and accident conditions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Milestone 1.2.9: Radiolytic Gas Generation Measurements from Helium Backfilled Samples of AA1100 and AA6061 Coupons

Nearly 18 metric tons of aluminum-clad spent nuclear fuel (ASNF) is safely managed by the U.S. Department of Energy (DOE). These assemblies are currently in interim storage, with the intention of extended storage (>50 years) until final disposal. Strategies for the continued safe storage of this material are under evaluation, of which a key criterion is the extent of molecular hydrogen gas (H2) formation from the radiolysis of hydrated (oxy)hydroxide aluminum corrosion layers arising from in-reactor and wet storage conditions. Radiation-induced H2 formation has the potential to compromise cladding and storage canister integrity, in addition to promoting the formation of unfavorable gaseous environments. Consequently, understanding this radiation-induced phenomenon is essential for the development of predictive modeling capabilities to support technical considerations and the identification of radiation related challenges for the extended storage of ASNF. Here, we report radiolytic H2 yields (G-values, G(H2)) from the gamma irradiation of ‘pristine’ and pre-corroded aluminum coupons in helium (He) environments as a function of alloy composition (AA1100 and AA6061), relative humidity, and absorbed gamma dose. Measured yields were lower than corresponding values reported for argon environments, a positive result for proposed extended dry storage strategies that would employ helium as a backfill gas. Interestingly, the presented G(H2)He values are comparable to those previously measured in nitrogen environments, suggesting a He mediated H2 inhibition process, attributed here to Penning ionization.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

A study on texture stability and the biaxial creep behavior of as-hydrided CWSR Zircaloy-4 cladding at the effective stresses from 55 MPa to 65 MPa and temperatures from 300°C to 400°C

The creep rupture of high burnup used nuclear fuel (> 45 GWD/MTU) cladding is regarded as one of the failure mechanisms during long-term dry storage. A high amount of zirconium hydride in the cladding matrix would degrade the mechanical properties of the cladding especially leading to delayed hydride cracking. To better understand the influence of zirconium hydride on the biaxial thermal creep performance and the crystalline texture stability of Zircaloy-4 cladding, the pressurized tube technique is applied to test the durability of the as-hydrided material. Tests were performed on as-received Zircaloy-4 tubular specimens as well as-hydrided ones with targeted 300 wt parts per million (wppm) or 750 wppm hydrogen. The biaxial creep experiments were conducted at temperatures from 300 degrees C to 400 degrees C and at equivalent stresses at mid-wall from 55 MPa to 65 MPa. The hydridation process prior to creep tests induces the formation of FCC delta-hydride platelets along the circumferential direction of the tube. This alignment and phase structure of hydride show no significant change after biaxial creep tests. The creep strain-rate negatively depends on the hydrogen content. The synchrotron wide-angle X-ray diffraction (WAXD) technique and electron backscatter diffraction (EBSD) analysis were applied for the study of the crystallographic orientation relationship. zirconium-to-hydride grain orientation follows Shoji-Nishiyama crystallographic relationship. This relationship is stable before and after creep deformation. These results of creep performance and texture stability of Zircaloy-4 claddings can help support the design basis of interim and long-term dry storage facilities.

creep↗

Effects of fuel thickness on thermal and mechanical performance of U10-Mo monolithic fuel plates

Monolithic fuels are being considered for conversion of high performance research and test reactors. These plate-type fuels are comprised of a low enrichment, high density U-Mo alloy fuels within an aluminum cladding. Although the plates have demonstrated satisfactory performance; still, use of a high density fuel in a foil form retains technical challenges that could affect the overall performance. To understand performance of this new design during fabrication and irradiation, the plates have been evaluated for various geometrical and operational variables. As a part of these set of parametric sensitivity studies, effects of foil thickness on performance were studied. Because high performance research reactors will utilize different fuel thicknesses, it is necessary to evaluate possible effects for a range of thicknesses that are being considered for various designs. Based on the preliminary design specifications, the fuel thicknesses were varied between the limiting cases. The bounding fuel thicknesses were 0.203 mm as minimum that is projected for ATR, and 0.635 mm as maximum that is projected for MITR. To study possible effects, a behavioral model was developed for a selected plate from RERTR-12 experiments and the plate was simulated with as run irradiation history. The simulations were repeated for a range of fuel thicknesses, while keeping the cladding thickness and the operational parameters the same. The results have indicated that the plates with thicker fuels would have higher temperatures, deformations and shutdown stresses. To investigate the effects of fuel thickness exclusively, operational parameters were scaled. In particular, a second set of simulations with prorated volumetric heat generation rates were performed. The results indicated that the fabrication stresses in the fuel foil decrease with an increasing fuel thickness. On contrary, irradiation stresses of the fuel at shutdown are higher for the plates with thicker fuels. Greater peak deformations occurred in plates with thicker fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Fuels Campaign Execution Plan

The Advanced Fuels Campaign (AFC) Execution Plan details the strategy, mission, scope, and goals—both near-term and long-term—along with the structure and organization of nuclear fuels and materials research, development, and demonstration (RD&D) activities within the Fuel Cycle Technologies (FCT) program. The FCT program, tasked by the U.S. Department of Energy (DOE), employs a science-based approach to advance fuel technologies. This approach integrates theory, experiments, and multi-scale modeling and simulation (M&S) to develop a predictive understanding of fuel fabrication processes and fuel/cladding performance under irradiation, moving beyond traditional empirical methods. The long-term goals of the AFC are guided by the AFC Strategic Plan and align with the DOE Office of Nuclear Energy (NE) Roadmap [1], which outlines a multi-decade vision for demonstrating and qualifying advanced fuel forms to support diverse fuel cycle options. Near-term goals focus on enhancing accident tolerant fuels (ATF) for Light Water Reactors (LWR), a significant challenge that demands balancing immediate objectives with ongoing progress toward advanced reactor missions. Accelerating the traditional fuel qualification process to meet ATF objectives is another critical challenge. A detailed set of 5-year goals, summarized below, has been developed in line with the overarching science-based fuel development approach: • Advanced LWR Fuel Technologies: By 2027, support the development of advanced LWR fuel technologies with improved performance and enhanced accident tolerance. This includes high burnup (HBu), low enriched uranium (LEU)+, coated cladding, and doped fuel, aimed at complementing industry-led significant LWR uprates and plant refurbishments. • Tristructural Isotropic (TRISO) Fuel: Achieve qualification by 2028 and develop improved designs for emerging markets. • Metal Fuel: Achieve qualification by 2028 and develop improved designs for emerging markets. • Molten Salt Fuel: By 2027, deploy a robust program that enables fuel salt qualification technologies needed to support fuel salt research and development (R&D), focusing on emergent needs to derisk fuel salt production and utilization in advanced reactors. • Long-Term ATF: Develop fuel technologies that enable significant power uprates (~50%) in refurbished or new LWRs while optimizing fissile material utilization and waste disposal. The 5-year milestones in the AFC Execution Plan are contingent on an assumed budget. This Execution Plan will be updated annually to reflect actual funding profiles as budget guidance becomes available, ensuring milestones are adjusted accordingly. In summary, the AFC Execution Plan presents a comprehensive strategy to advance nuclear fuel technologies through a science-based approach, addressing both near-term and long-term goals while adapting to funding realities.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development and formulation of physics based metallic fuel models and comparison to integral irradiation data

Metallic fuel has an important historical significance in the development of nuclear reactors and continues to be relevant to the progression of advanced test and power reactors. A number of models, ranging from empirical to mechanistic, have been developed and implemented in various fuel performance codes to describe U-Zr and U-Pu-Zr fuel and typical fast reactor cladding materials. One challenge of using these models to simulate fuel performance is the inevitable tangling of coupled phenomena that can cloud proper implementation, calibration, and eventual utilization of new models. Here in an effort to provide a baseline capability that will facilitate the use of advanced models, new capabilities have been implemented into the fuel performance code BISON specific to metallic fuel simulations, ranging from materials properties, fission gas release and swelling calculations, coolant channel models, and cladding correlations. These models have been applied to the X441/X441A EBR-II experimental assembly data, a set of irradiated metallic UPuZr fuel rods of varying pin designs. The models implemented in BISON are able to capture the general trend of the expected response of the fuel and cladding to irradiation in EBR-II, especially when considering the spread in experimental measurements and the uncertainties inherited from the historical material models. Ultimately, the models outlined here provide the baseline capabilities on which new models can build upon in order to improve the prediction of metallic fuel performance simulations in off-normal designs or operations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced fuels campaign 2013 accomplishments

The mission of the Advanced Fuels Campaign (AFC) is to perform Research, Development, and Demonstration (RD&D) activities for advanced fuel forms (including cladding) to enhance the performance and safety of the nation’s current and future reactors; enhance proliferation resistance of nuclear fuel; effectively utilize nuclear energy resources; and address the longer-term waste management challenges. This includes development of a state-of-the art Research and Development (R&D) infrastructure to support the use of “goal-oriented science-based approach.” In support of the Fuel Cycle Research and Development (FCRD) program, AFC is responsible for developing advanced fuels technologies to support the various fuel cycle options defined in the Department of Energy (DOE) Nuclear Energy Research and Development Roadmap, Report to Congress, April 2010. Accomplishments made during fiscal year (FY) 2013 are highlighted in this report, which focuses on completed work and results. The process details leading up to the results are not included; however, the technical contact is provided for each section.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A User Guide to PARET/ANL (V.7.6) (Rev.1)

PARET was originally created in 1969 at what is now Idaho National Laboratory (INL), to analyze reactivity insertion events in research and test reactor cores cooled by light or heavy water, with fuel composed of either plates or pins. The use of PARET is also appropriate for fuel assemblies with curved fuel plates when their radii of curvatures are large with respect to the fuel plate thickness. The PARET/ANL version of the code has been developed at Argonne National Laboratory (ANL) under the sponsorship of the U.S. Department of Energy/NNSA, and has been used by the Reactor Conversion Program to determine the expected transient behavior of a large number of reactors. PARET/ANL models the various fueled regions of a reactor core as channels. Each of these channels consists of a single flat fuel plate/pin (including cladding and, optionally, a gap) with water coolant on each side. In slab geometry the coolant channels for a given fuel plate are of identical dimensions (mirror symmetry), but they can be of different thickness in each channel. There can be many channels, but each channel is independent and coupled only through reactivity feedback effects to the whole core. The time-dependent differential equations that represent the system are replaced by an equivalent set of finite-difference equations in space and time, which are integrated numerically. PARET/ANL uses fundamentally the same numerical scheme as RELAP5 for the time-integration of the point-kinetics equations. The one-dimensional thermal-hydraulic model includes temperature-dependent thermal properties of the solid materials, such as heat capacity and thermal conductivity, as well as the transient heat production and heat transfer from the fuel meat to the coolant. Temperature- and pressure-dependent thermal properties of the coolant such as enthalpy, density, thermal conductivity, and viscosity are also used in determining parameters such as friction factors and heat transfer coefficients. The code first determines the steady-state solution for the initial state. Then the solution of the transient is obtained by integration in time and space. Multiple heat transfer, DNB and flow instability correlations are available. The code was originally developed to model reactors cooled by an open loop, which was adequate for rapid transients in pool-type cores. An external loop model appropriate for Miniature Neutron Source Reactors (MNSR’s) was also added to PARET/ANL to model natural circulation within the vessel, heat transfer from the vessel to pool and heat loss by evaporation from the pool. PARET/ANL also contains models for decay heat after shutdown, control rod reactivity versus time or position, time-dependent pump flow, and loss-of-flow event with flow reversal as well as logic for trips on period, power, and flow. Feedback reactivity effects from coolant density changes and temperature changes are represented by tables. Feedback reactivity from fuel heat-up (Doppler Effect) is represented by a four-term polynomial in powers of fuel temperature. Photo-neutrons produced in beryllium or in heavy water may be included in the point-kinetics equations by using additional delayed neutron groups.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗