Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERSTITIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Lithium-Ion Battery Materials as Tunable, “Redox Non-Innocent” Catalyst Supports

The development of general strategies for the electronic tuning of a catalyst’s active site is an ongoing challenge in heterogeneous catalysis. To this end, herein, we describe the application of Li-ion battery cathode and anode materials as redox non-innocent catalyst supports that can be continuously modulated as a function of lithium intercalation. A zero-valent nickel complex was oxidatively grafted onto the surface of lithium manganese oxide (Li x Mn 2 O 4 ) to yield isolated Ni2+ occupying the vacant interstitial octahedral site in the Li diffusion channel on the surface and subsurface of the spinel structure (Ni/Li x Mn 2 O 4 ). Additionally, the activity of Ni/Li x Mn 2 O 4 for olefin hydrogenation, as a representative probe reaction, was found to increase monotonically as a function of support reductive lithiation. Simulation of Ni/Li x Mn 2 O 4 reveals the dramatic impact of surface redox states on the viability of the homolytic oxidative addition mechanism for H 2 activation. Catalyst control through support lithiation was extended to an organotantalum complex on Li x TiO 2 , demonstrating the generality of this phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations and Experiments Reveal Effect of Nanopores on Helium Diffusion in Quartz

The diffusion properties of noble gases in minerals are widely used to reconstruct the thermal histories of rocks. In this work, we combine density functional theory (DFT) calculations with laboratory experiments to investigate controls on helium diffusion in quartz. DFT calculations for perfect α-quartz predict substantially lower activation energies and frequency factors for helium diffusion than observed in laboratory experiments, especially in the [001] direction. These results imply that no helium could be retained in quartz at Earth surface temperatures, which conflicts with observations of partial cosmogenic 3 He retention over geologic time scales. Here, we implement a model of helium diffusion in α-quartz modulated by nanopore defects that disrupt energetically favorable diffusion pathways. In this model, we find that laboratory-determined diffusivities can be most closely reproduced when a helium atom encounters ~70 nanopore sites per million interstitial sites. The results of our model indicate that diffusion of helium in natural quartz, like other noble gases in other minerals, can be significantly modulated by extended defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine-Learning-Guided Insights into Solid-Electrolyte Interphase Conductivity: Are Amorphous Lithium Fluorophosphates the Key?

Despite decades of study, the identity of the dominant Li + -conducting phase within the inorganic SEI of Li-ion batteries remains unresolved. While the mosaic model describes LiF/Li 2 O/Li 2 CO 3 nanocrystallites within a disordered matrix, these crystalline phases inherently offer limited ionic conductivity. Growing evidence suggests that interfaces, grain boundaries, and amorphous phases may instead host the primary fast-ion pathways. Using diffusion-based generative structure prediction and machine-learning interatomic potentials (MLIPs), we investigate lithium difluorophosphate (LiPO 2 F 2 ), a key mixed-anion decomposition product of phosphorus- and fluorine-containing electrolytes. We identify a stable crystalline polymorph and demonstrate that the amorphous counterpart is conductive, with projected room-temperature σ ≈ 0.18 mS cm –1 and E a ≈ 0.40 eV. Here, this enhancement stems from structural disorder flattening the Li site-energy landscape and a low formation energy for Li-interstitial defects, which supplies additional mobile carriers. We propose amorphous mixed-anion Li-P-O-F phases as a promising conducting medium in the SEI, offering a specific target for engineering improved battery interfaces.

Zhong, Peichen [University of California, Berkeley↗

Confinement-Driven Segregation Enables Glassy Polymer Hybrid Materials Featuring Disordered Hyperuniformity and Integrated Self-Healing

The blending of glassy copolymer-brush modified colloids with a viscoelastic linear copolymer featuring intrinsic self-healing enabled disordered hyperuniform hybrid materials that combined mechanical robustness with structural color, processability, environmental stability, and the ability to recover structure and properties after incurring physical damage via ‘integrated self-healing’. Symmetric linear n-butyl acrylate/methyl methacrylate (BA/MMA) were co-assembled with asymmetric glassy BA/MMA statistical copolymer brush (silica) particles. ‘Confinement-driven segregation’ resulted in a microphase-separated morphology in which the linear copolymer resided within the interstitial regions of a rigid (∼1 GPa) copolymer brush particle template with disordered hyperuniform microstructure. Diffusion of the self-healing copolymer additive into damage regions drove the recovery after damage, along with the restoration of structural color due to the materials hyperuniform microstructure. The synergistic action of intrinsic and extrinsic healing mechanisms could provide a versatile platform for the bottom-up fabrication of multifunctional hybrid materials with increased damage resistance and functional longevity.

36 MATERIALS SCIENCE↗

Nonadditive Interactions Unlock Small-Particle Mobility in Binary Colloidal Monolayers

We examine the organization and dynamics of binary colloidal monolayers composed of micron-scale silica particles interspersed with smaller-diameter silica particles that serve as minority component impurities. These binary monolayers are prepared at the surface of ionic liquid droplets over a range of size ratios (σ = 0.16–0.66) and are studied with low-dose minimally perturbative scanning electron microscopy (SEM). The high resolution of SEM imaging provides direct tracking of all particle coordinates over time, enabling a complete description of the microscopic state. In these bidisperse size mixtures, particle interactions are nonadditive because interfacial pinning to the droplet surface causes the equators of differently sized particles to lie in separate planes. By varying the size ratio, we control the extent of nonadditivity in order to achieve phase behavior inaccessible to additive 2D systems. Across the range of size ratios, we tune the system from a mobile small-particle phase (σ < 0.24) to an interstitial solid (0.24 < σ < 0.33) and furthermore to a disordered glass (σ > 0.33). These distinct phase regimes are classified through measurements of hexagonal ordering of the large-particle host lattice and the lattice’s capacity for small-particle transport. Altogether, we explain these structural and dynamic trends by considering the combined influence of interparticle interactions and the colloidal packing geometry. Our measurements are reproduced in molecular dynamics simulations of 2D nonadditive disks, suggesting an efficient method for describing confined systems with reduced dimensionality representations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pick-and-Place Transfer of Arbitrary-Metal Electrodes for van der Waals Device Fabrication

Van der Waals electrode integration is a promising strategy to create nearly perfect interfaces between metals and 2D materials, with advantages such as eliminating Fermi-level pinning and reducing contact resistance. However, the lack of a simple, generalizable pick-and-place transfer technology has greatly hampered the wide use of this technique. Here, we demonstrate the pick-and-place transfer of prefabricated electrodes from reusable polished hydrogenated diamond substrates without the use of any sacrificial layers due to the inherent low-energy and dangling-bond-free nature of the hydrogenated diamond surface. The technique enables transfer of arbitrary-metal electrodes and an electrode array, as demonstrated by successful transfer of eight different elemental metals with work functions ranging from 4.22 to 5.65 eV. We also demonstrate the electrode array transfer for large-scale device fabrication. The mechanical transfer of metal electrodes from diamond to van der Waals materials creates atomically smooth interfaces with no interstitial impurities or disorder, as observed with cross-section high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. As a demonstration of its device application, we use the diamond transfer technique to create metal contacts to monolayer transition metal dichalcogenide semiconductors with high-work-function Pd, low-work-function Ti, and semimetal Bi to create n- and p-type field-effect transistors with low Schottky barrier heights. We also extend this technology to air-sensitive materials (trilayer 1T’ WTe 2 ) and other applications such as ambipolar transistors, Schottky diodes, and optoelectronics. This highly reliable and reproducible technology paves the way for new device architectures and high-performance devices.

2D materials↗

Extreme Nanoconfinement Dramatically Enhances Small Molecule Solubility in Nonpolar Polymers

Elucidating gas solubility in confined polymer systems addresses a fundamental gap in polymer physics and has important implications for gas barrier and separation technologies and polymer upcycling reactions. In this study, we examine the solubility of methanol and n-hexane in polystyrene and low-density polyethylene confined within the interstitial pores of disordered silica nanoparticle packings. Using capillary rise infiltration, these polymers are infiltrated into the nanoparticle packings. Gas solubility in these confined polymers is measured using a quartz crystal microbalance. Remarkably, confinement leads to a 10- to ∼100-fold increase in gas solubility. Systematic experiments reveal that pore size plays a dominant role in increasing solubility. In contrast, the molecular weight of the polymer and the surface wetting characteristics of the nanoparticles, achieved by hydrophobically modifying the nanoparticles, have minimal effects. By systematically varying penetrant polarity, polymer crystallinity, pore size, and nanopore surface chemistry, this study isolates geometric nanoconfinement as the dominant factor governing solubility enhancement in confined polymers. Atomistic simulations revealed that confinement and surface−polymer interactions both contribute to enhanced solubility, with polymer packing playing a significant role in modulating gas uptake. Here, these results suggest that the changes in the molecular arrangements of polymer segments underlie the observed trends. This study highlights the potential of confined polymers in engineering the separation performance of membranes and heterogeneously catalyzed polymer upcycling reactions.

alcohols↗

High Tolerance to Iron Contamination in Lead Halide Perovskite Solar Cells

The relationship between charge-carrier lifetime and the tolerance of lead halide perovskite (LHP) solar cells to intrinsic point defects has drawn much attention by helping to explain rapid improvements in device efficiencies. However, little is known about how charge-carrier lifetime and solar cell performance in LHPs are affected by extrinsic defects (i.e., impurities), including those that are common in manufacturing environments and known to introduce deep levels in other semiconductors. Here, we evaluate the tolerance of LHP solar cells to iron introduced via intentional contamination of the feedstock and examine the root causes of the resulting efficiency losses. We find that comparable efficiency losses occur in LHPs at feedstock iron concentrations approximately 100 times higher than those in p-type silicon devices. Photoluminescence measurements correlate iron concentration with nonradiative recombination, which we attribute to the presence of deep-level iron interstitials, as calculated from first-principles, as well as iron-rich particles detected by synchrotron-based X-ray fluorescence microscopy. At moderate contamination levels, we witness prominent recovery of device efficiencies to near-baseline values after biasing at 1.4 V for 60 s in the dark. We theorize that this temporary effect arises from improved charge-carrier collection enhanced by electric fields strengthened from ion migration toward interfaces. Lastly, our results demonstrate that extrinsic defect tolerance contributes to high efficiencies in LHP solar cells, which inspires further investigation into potential large-scale manufacturing cost savings as well as the degree of overlap between intrinsic and extrinsic defect tolerance in LHPs and 'perovskite-inspired' lead-free stable alternatives.

14 SOLAR ENERGY↗

Charge-Transport Mechanisms in CuInSe x S 2– x Quantum-Dot Films

Colloidal quantum dots (QDs) have attracted considerable attention as promising materials for solution-processable electronic and optoelectronic devices. Copper indium selenium sulfide (CuInSe x S 2–x or CISeS) QDs are particularly attractive as an environmentally benign alternative to the much more extensively studied QDs containing toxic metals such as Cd and Pb. Carrier transport properties of CISeS-QD films, however, are still poorly understood. Here, we aim to elucidate the factors that control charge conductance in CISeS QD solids and, based on this knowledge, develop practical approaches for controlling the polarity of charge transport and carrier mobilities. To this end, we incorporate CISeS QDs into field-effect transistors (FETs) and perform detailed characterization of these devices as a function of the Se/(Se+S) ratio, surface treatment, thermal annealing, and the identity of source and drain electrodes. We observe that as-synthesized CuInSe x S 2–x QDs exhibit degenerate p-type transport, likely due to metal vacancies and CuIn’’ anti-site defects (Cu 1+ on an In 3+ site) that act as acceptor states. Moderate-temperature annealing of the films in the presence of indium source and drain electrodes leads to switching of the transport polarity to nondegenerate n-type, which can be attributed to the formation of In-related defects such as In Cu •• (an In 3+ cation on a Cu 1+ site) or In i ••• (interstitial In3+) acting as donors. We observe that the carrier mobilities increase dramatically (by 3 orders of magnitude) with increasing Se/(Se+S) ratio in both n- and p-type devices. To explain this observation, we propose a two-state conductance model, which invokes a high-mobility intrinsic band-edge state and a low-mobility defect-related intragap state. These states are thermally coupled, and their relative occupancies depend on both QD composition and temperature. Here, our observations suggest that the increase in the relative fraction of Se moves conduction- and valence band edges closer to low-mobility intragap levels. This results in increased relative occupancy of the intrinsic band-edge states and a corresponding growth of the measured mobility. Further improvement in charge-transport characteristics of the CISeS QD samples as well as their stability is obtained by infilling the QD films with amorphous Al 2 O 3 using atomic layer deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Borophene Synthesis on Au(111)

Borophene (the first two-dimensional (2D) allotrope of boron) is emerging as a groundbreaking system for boron-based chemistry and, more broadly, the field of low-dimensional materials. Exploration of the phase space for growth is critical because borophene is a synthetic 2D material that does not have a bulk layered counterpart and thus cannot be isolated via exfoliation methods. Furthermore, we report synthesis of borophene on Au(111) substrates. Unlike previously studied growth on Ag substrates, boron diffuses into Au at elevated temperatures and segregates to the surface to form borophene islands as the substrate cools. These observations are supported by ab initio modeling of interstitial boron diffusion into the Au lattice. Borophene synthesis also modifies the surface reconstruction of the Au(111) substrate, resulting in a trigonal network that templates growth at low coverage. This initial growth is composed of discrete borophene nanoclusters, whose shape and size are consistent with theoretical predictions. As the concentration of boron increases, nanotemplating breaks down and larger borophene islands are observed. Spectroscopic measurements reveal that borophene grown on Au(111) possesses a metallic electronic structure, suggesting potential applications in 2D plasmonics, superconductivity, interconnects, electrodes, and transparent conductors.

36 MATERIALS SCIENCE↗

Deconvoluting Structures of Component Plant Biopolymers Using Deuterium Labeled Brassica oleracea Stems

Several Brassica species are cultivated globally for the production of seed oils as food, lubricants, and increasingly biofuels. The stem and leaf residues of these herbaceous dicotyledonous crops constitute another feedstock for biofuels and other products. Plant cell walls are complex, multipolymeric structures that consist primarily of polysaccharides and lignin. Cellulose chains coalesce to form crystalline microfibrils while the amorphous biopolymers, hemicellulose, and lignin form a network structure and fill the interstitial space. Neutron scattering has been used for the structural study of the assembly and deconstruction of the plant cell walls. However, similar neutron sensitivity of the different amorphous biopolymers has made structural association to individual component biopolymers nontrivial and ambiguous. To improve the association of structural features to specific biopolymer components, partial deuteration of the plant cell wall can be employed to increase the difference in the neutron scattering length density between amorphous carbohydrate and lignin plant polymers. Vegetative stems from partially deuterated Brassica oleracea acephala (kale) plants were obtained commercially, and the plant cell wall structures were studied by contrast-variation small-angle neutron scattering (CV-SANS) and Fourier-transform infrared spectroscopy (FTIR). FTIR results indicated that deuterium substitution for hydrogen in the carbohydrates was higher than that in lignin. By combining CV-SANS and FTIR results, the neutron scattering length density (nSLD) of the polysaccharides and lignin was determined to match nSLD of 65%:35% and 48%:52% D 2 O/H 2 O solvent mixtures, respectively. These nSLD values were higher than the nSLD values of polysaccharides and lignin for H 2 O grown biopolymers. The nSLD increase correlates to replacing about 42.5% of hydrogens present as both C–H and O–H groups in cellulose with deuterium atoms, while only 21% for lignin. In conclusion, this study lays the foundation to use partially deuterated plants to deconvolute structural features of the different component biopolymers, especially cellulose, hemicellulose, and lignin, of the plant cell wall without introducing unintended structural modifications due to the pretreatment extraction processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thallium Mercury Chalcobromides, TlHg 6 Q 4 Br 5 (Q = S, Se)

The new compounds TlHg6Q4Br5 (Q = S, Se) are reported along with their syntheses, crystal structures, and thermal and optical properties, as well as electronic band structure calculations. Both compounds crystallize in the tetragonal I4/m space group with a = 14.145(1) Å, c = 8.803(1) Å, and dcalc = 7.299 g/cm3 for TlHg6S4Br5 (compound 1) and a = 14.518(2) Å, c = 8.782(1) Å, and dcalc = 7.619 g/cm3 for TlHg6Se4Br5 (compound 2). They consist of cuboid Hg12Q8 building units interconnected by trigonal pyramids of BrHg3, forming a three-dimensional structure. The interstitial spaces are filled with thallium and bromide ions. Compounds 1 and 2 melt incongruently and show band gaps of 3.03 and 2.80 eV, respectively, which agree well with the calculated ones. First-principles electronic structure calculations at the density functional theory level reveal that both compounds have indirect band gaps, but there also exist direct transitions at energies similar to the indirect gaps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of phase-pure U 2 N 3 microspheres and its decomposition into UN

Uranium mononitride (UN) is important as a nuclear fuel. Fabrication of UN in its microspherical form also has its own merits since the advent of the concept of accident-tolerant fuel, where UN is being considered as a potential fuel in the form of TRISO particles. But, not many processes have been well established to synthesize kernels of UN. Therefore, a process for synthesis of microspherical UN with a minimum amount of carbon is discussed herein. First, a series of single-phased microspheres of uranium sesquinitride (U 2 N 3 ) were synthesized by nitridation of UO 2 +C microspheres at a few different temperatures. Resulting microspheres were of low-density U 2 N 3 and decomposed into low-density UN. The variation of density of the synthesized sesquinitrides as a function of its chemical composition indicated the presence of extra (interstitial) nitrogen atoms corresponding to its hyperstoichiometry, which is normally indicated as α-U 2 N 3 . Average grain sizes of both U 2 N 3 and UN varied in a range of 1–2.5 μm. In addition, these had a considerably large amount of pore spacing, indicating the potential sinterability of UN toward its use as a nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of Dopant Distribution on the Plasmonic Properties of Indium Tin Oxide Nanocrystals

Doped metal oxide nanocrystals represent an exciting frontier for colloidal synthesis of plasmonic materials, displaying unique optoelectronic properties and showing promise for a variety of applications. However, fundamental questions about the nature of doping in these materials remain. In this article, the strong influence of radial dopant distribution on the optoelectronic properties of colloidal indium tin oxide nanocrystals is reported. Comparing elemental depth-profiling by X-ray photoelectron spectroscopy (XPS) with detailed modeling and simulation of the optical extinction of these nanocrystals using the Drude model for free electrons, a correlation between surface segregation of tin ions and the average activation of dopants is observed. A strong influence of surface segregation of tin on the line shape of the localized surface plasmon resonance (LSPR) is also reported. Samples with tin segregated near the surface show a symmetric line shape that suggests weak or no damping of the plasmon by ionized impurities. It is suggested that segregation of tin near the surface facilitates compensation of the dopant ions by electronic defects and oxygen interstitials, thus reducing activation. A core shell model is proposed to explain the observed differences in line shape. These results demonstrate the nuanced role of dopant distribution in determining the optoelectronic properties of semiconductor nanocrystals and suggest that more detailed study of the distribution and structure of defects in plasmonic colloidal nanocrystals is warranted.

Lounis, SD↗

Supramolecular Assembly of U(IV) Clusters and Superatoms with Unconventional Countercations

Superatoms are nanometer-sized molecules or particles that form ordered lattices, mimicking their atomic counterparts. Hierarchical assembly of superatoms gives rise to emergent properties in lattices of quantum dots, p-block clusters, and fullerenes. In this report, we introduce a family of uranium-oxysulfate cluster anions whose hierarchical assembly in water is controlled by two parameters: acidity and the lanthanide or transition-metal countercation. In acid, larger Ln III (Ln = La–Ho) link hexamer (U 6 ) oxoclusters into body-centered cubic frameworks, while smaller Ln III (Ln = Er–Lu and Y) promote linking of 14 U 6 clusters into hollow superclusters (U 84 superatoms). U 84 assembles into superlattices including cubic-closest packed, body-centered cubic, and interpenetrating networks, bridged by interstitial countercations and U 6 clusters. Divalent transition metals (TM = Mn II and Zn II ) charge-balance and promote the fusion of 10 U 6 and 10 U monomers into a wheel-shaped cluster (U 70 ). Dissolution of U 70 in organic media shows (by small-angle X-ray scattering) that differing supramolecular assemblies are accessed, controlled by TM II -linking of U 70 clusters. Magnetic measurements of these assemblies reveal Curie–Weiss behavior at high temperatures, without pairing of the 5f 2 -electrons down to 2 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Recipe for a Great Meal: A Benchtop Route from Elemental Se to Superior Thermoelectric β-Ag 2 Se

The low-temperature modification of β-Ag 2 Se has proven to be useful as a near-room-temperature thermoelectric material. Over the past years, research has been devoted to interstitial, vacancy, and substitutional doping into the parent β-Ag 2 Se structure, aiming at tuning the material’s charge and heat transport properties to enhance thermoelectric performance. The transformation of β-Ag 2 Se into α-Ag 2 Se at ~134 °C and the low solubility of dopants are the main obstacles for the doping approach. Herein, we report a facile, safe, scalable, and cost-effective benchtop approach to successfully produce metal-doped β-Ag 2 Se. The doped materials display a remarkable enhancement of thermoelectric performance with a record-high peak zT of 1.30 at 120 °C and an average zT of ~1.15 in the 25–120 °C range for 0.2 at. % Zn-doped Ag 2 Se. The enhancement in zT is attributed to point defects created by Zn doping into Ag vacancies/interstitials, which enhances the scattering of phonons and tunes the charge carrier properties, leading to the significant suppression of thermal conductivity. In conclusion, the simplicity of the synthetic method developed herein and the high performance of the final products provide an avenue to produce high-quality Ag 2 Se-based thermoelectric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomistic Origin of Microsecond Carrier Lifetimes at Perovskite Grain Boundaries: Machine Learning-Assisted Nonadiabatic Molecular Dynamics

The polycrystalline nature of perovskites, stemming from their facile solution-based fabrication, leads to a high density of grain boundaries (GBs) and point defects. However, the impact of GBs on perovskite performance remains uncertain, with contradictory statements found in the literature. We developed a machine learning force field, sampled GB structures on a nanosecond time scale, and performed nonadiabatic (NA) molecular dynamics simulations of charge carrier trapping and recombination in stoichiometric and doped GBs. The simulations reveal long, microsecond carrier lifetimes, approaching experimental data, stemming from charge separation at the GBs and small NA coupling, 0.01–0.1 meV. Stoichiometric GBs exhibit transient trap states, which, however, are not particularly detrimental to the carrier lifetime. Halide dopants form interstitial defects in the bulk, but have a stabilizing influence on the GB structure by passivating undersaturated Pb atoms and reducing the transient trap state formation. On the contrary, excess Pb destabilizes GBs, allowing formation of persistent midgap states that trap charges. Still, the charge carrier lifetime reduces relatively little, because the midgap states decouple from the bands, and charges are more likely to escape back into bands upon a GB structural fluctuation. The atomistic study into the structural dynamics of perovskite GBs and its influence on charge carrier trapping and recombination provides valuable insights into the complex properties of perovskites and the intricate role of GBs in the material performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topochemical Oxidation of Ruddlesden–Popper Nickelates Reveals Distinct Structural Family: Oxygen-Intercalated Layered Perovskites

Layered perovskites─including the Dion–Jacobson, Ruddlesden–Popper, and Aurivillius families─exhibit a wide range of correlated electron phenomena, from high-temperature superconductivity to multiferroicity. Here, in this study, we report a new family of layered perovskites realized through topochemical oxidation of La n+1 Ni n O 3n+1+δ (n = 1–4) Ruddlesden–Popper nickelate thin films. Postgrowth ozone annealing induces a substantial c-axis expansion─17.8% for La 2 NiO 4+δ (n = 1)─that monotonically decreases with increasing n. Surface synchrotron X-ray diffraction and coherent Bragg rod analysis (COBRA) reveal that this structural expansion arises from the intercalation of approximately δ ≈ 0.7–1.0 oxygen atoms into interstitial sites within the rock salt spacer layers, far exceeding the previous record of δ ≈ 0.3 for any Ruddlesden–Popper oxide. These oxygen-intercalated phases form a new class of layered perovskites with a spacer layer composition intermediate between the Ruddlesden–Popper and Aurivillius phases. Furthermore, oxygen intercalation induces metallicity, enhances nickel–oxygen hybridization, and suppresses oxygen octahedral rotations, a feature associated with high-temperature superconductivity in Ruddlesden–Popper nickelates. Our work establishes topochemical oxidation as a powerful approach to accessing highly oxidized, metastable phases across a broad range of layered oxide systems, offering new platforms to engineer electronic properties via intercalation chemistry.

Ferenc Segedin, Dan [Harvard Univ., Cambridge, MA ↗