Search NASA⌕ Search

SEARCH · Search NASA

Results for “Implicit method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Solving Inverse Radiation Transport Problems with Multi-Sensor Data in the Presence of Correlated Measurement and Modeling Errors

Inverse radiation transport focuses on identifying the configuration of an unknown radiation source given its observed radiation signatures. The inverse problem is traditionally solved by finding the set of transport model parameter values that minimizes a weighted sum of the squared differences by channel between the observed signature and the signature predicted by the hypothesized model parameters. The weights are inversely proportional to the sum of the variances of the measurement and model errors at a given channel. The traditional implicit (often inaccurate) assumption is that the errors (differences between the modeled and observed radiation signatures) are independent across channels. Here, an alternative method that accounts for correlated errors between channels is described and illustrated using an inverse problem based on the combination of gamma and neutron multiplicity counting measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Accelerating an iterative process by explicit annihilation

A slowly convergent stationary iterative process can be accelerated by explicitly annihilating (i.e., eliminating) the dominant eigenvector component of the error. The dominant eigenvalue or complex pair of eigenvalues can be estimated from the solution during the iteration. The corresponding eigenvector or complex pair of eigenvectors can then be annihilated by applying an explicit Richardson process over the basic iterative method. This can be done entirely in real arithmetic by analytically combining the complex conjugate annihilation steps. The technique is applied to an implicit algorithm for the calculation of two dimensional steady transonic flow over a circular cylinder using the equations of compressible inviscid gas dynamics. This demonstrates the use of explicit annihilation on a nonlinear problem.

Jespersen, D. C.↗

Numerical solution of the two-dimensional Euler equations by second-order upwind difference schemes

Two time-level, five-point explicit and implicit upwind difference schemes based on the characteristic flux difference splitting concept have been developed for the two-dimensional Euler equations. The method is conservative, second-order accurate in time and space, and general coordinate systems are used to treat complex geometries. Nonlinear flux limiters are employed to yield oscillation free sharp shock profiles. Upstream interpolation is used to yield a class of higher-order upwind schemes which closely mimic the locally one-dimensional method of characteristics (with fixed time intervals) through operator splitting. Numerical results have been obtained for a plane shock reflection and for flow over a circular arc in a channel. Characteristics of upwind TVD schemes, as applied to two-dimensional flows with embedded shocks are discussed.

Yang, J. Y.↗

Accelerating an iterative process by explicit annihilation

A slowly convergent stationary iterative process can be accelerated by explicitly annihilating (i.e., eliminating) the dominant eigenvector component of the error. The dominant eigenvalue or complex pair of eigenvalues can be estimated from the solution during the iteration. The corresponding eigenvector or complex pair of eigenvectors can then be annihilated by applying an explicit Richardson process over the basic iterative method. This can be done entirely in real arithmetic by analytically combining the complex conjugate annihilation steps. The technique is applied to an implicit algorithm for the calculation of two dimensional steady transonic flow over a circular cylinder using the equations of compressible inviscid gas dynamics. This demonstrates the use of explicit annihilation on a nonlinear problem.

Jespersen, D. C.↗

Comparison between the PISO algorithm and preconditioning methods for compressible flow

Two widely used family of algorithms, pressure-based and density-based methods, have been developed for computational fluid dynamics (CFD) problems over the years. Pressure-based methods (such as SIMPLE and PISO) use a Poisson-like equation for updating pressure instead of the continuity equation, while density-based methods use the continuity equation to update density (an equation of state is used to provide density in pressure based schemes and pressure in density based schemes). Pressure-based methods were developed originally for incompressible flows at low Reynolds numbers and were then extended to high Reynolds numbers and compressible applications. On the other hand, density based methods were originally developed for transonic flows and have been extended down to low Mach numbers through the use of preconditioning techniques. We compare these two very different approaches to solving the Navier-Stokes equations in order to gain an understanding of their similarities and differences. Specifically, we consider the PISO scheme as a representative pressure-based method and contrast it with a recently developed preconditioning scheme. We also compare the relative performance of the PISO algorithm with a Euler implicit algorithm that is employed to solve the preconditioned equations by means of a vector stability analysis.

Merkle, Charles L.↗

Transition and Breakdown to Turbulence in Incompressible Boundary Layers

We have developed a code where the nonlinear terms are treated implicitly. The equations are discretized using the two-point fourth order compact scheme in the y-direction and the backward Euler method in the x-direction. We investigated the transition process in a Blasius boundary layer due to fundamental type breakdown. With 8 modes in the w and 3 planes, we could compute the evolution of disturbances up to Re(x)=910, which is well into the strongly nonlinear region. The transition onset point is located around Re(x)=850. The comparison with the measurements and with the DNS computations are very good up to Re(x)=880.

Balakumar, Ponnampalam↗

Efficient Preconditioning of a High-Order Solver for Multiple Physics

This work addresses preconditioning approaches for an implicit high-order solver frame-work applied to multiple physics. The solver is based on a space-time spectral element method and matrix-free Newton-Krylov solver developed at NASA over the recent years. Within this context, most preconditioning methods are impractical, as the computational time and memory requirements scale poorly with increasing polynomial orders. To improve computational efficiency, we first describe a novel entity-based Block Jacobi preconditioner for the continuous-Galerkin solution of the linear-elasticity and linear-shell equations. Second, we introduce a multigrid algorithm to further reduce time-to-solution on stiff cases arising from continuous-and discontinuous-Galerkin discretizations. Results obtained on relevant single-physics reference solutions, demonstrate the feasibility of the methods, paving the way for high-order solutions of fully coupled multi-physics problems.

STMD↗

Accounting for correlated errors in inverse radiation transport problems.

Inverse radiation transport focuses on identifying the configuration of an unknown radiation source given its observed radiation signatures. The inverse problem is solved by finding the set of transport model variables that minimizes a weighted sum of the squared differences by channel between the observed signature and the signature predicted by the hypothesized model parameters. The weights per channel are inversely proportional to the sum of the variances of the measurement and model errors at a given channel. In the current treatment, the implicit assumption is that the errors (differences between the modeled and observed radiation signatures) are independent across channels. In this paper, an alternative method that accounts for correlated errors between channels is described and illustrated for inverse problems based on gamma spectroscopy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A fast platform for simulating semi-flexible fiber suspensions applied to cell mechanics

We present a novel platform for the large-scale simulation of three-dimensional fibrous structures immersed in a Stokesian fluid and evolving under confinement or in free-space in three dimensions. One of the main motivations for this work is to study the dynamics of fiber assemblies within biological cells. For this, we also incorporate the key biophysical elements that determine the dynamics of these assemblies, which include the polymerization and depolymerization kinetics of fibers, their interactions with molecular motors and other objects, their flexibility, and hydrodynamic coupling. This work, to our knowledge, is the first technique to include many-body hydrodynamic interactions (HIs), and the resulting fluid flows, in cellular assemblies of flexible fibers. We use non-local slender body theory to compute the fluid–structure interactions of the fibers and a second-kind boundary integral formulation for other rigid bodies and the confining boundary. A kernel-independent implementation of the fast multipole method is utilized for efficient evaluation of HIs. The deformation of the fibers is described by nonlinear Euler–Bernoulli beam theory and their polymerization is modeled by the reparametrization of the dynamic equations in the appropriate non-Lagrangian frame. We use a pseudo-spectral representation of fiber positions and implicit time-stepping to resolve large fiber deformations, and to allow time-steps not excessively constrained by temporal stiffness or fiber–fiber interactions. The entire computational scheme is parallelized, which enables simulating assemblies of thousands of fibers. We use our method to investigate two important questions in the mechanics of cell division: (i) the effect of confinement on the hydrodynamic mobility of microtubule asters; and (ii) the dynamics of the positioning of mitotic spindle in complex cell geometries. Finally to demonstrate the general applicability of the method, we simulate the sedimentation of a cloud of semi-flexible fibers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Space-Dependent Wielandt Shift Methods for Multigroup Diffusion Eigenvalue Problems

In the calculation of neutronic eigenfunctions and eigenvalues, it is often desirable to approximate the neutron transport equation by a diffusion equation that requires significantly less computational resources to solve. Even when a full transport solution is needed, the solution of the diffusion system can be used to accelerate iterative methods for calculating the transport eigenfunction and eigenvalue. The convergence rate of the basic power iteration method for eigenvalue problems is governed by the dominance ratio; realistic reactor core problems often have high dominance ratios and the power iteration method can converge slowly as a result. A common technique for accelerating the convergence of power iteration is the Wielandt shift (WS) method, which reduces the dominance ratio by 'shifting' the eigenvalue spectrum using an estimate of the desired eigenvalue. WS provides a significant speedup over power iteration if the eigenvalue estimate is close to the true eigenvalue, but it can be difficult to obtain such an estimate. In practice, the shift in the WS method can be dynamically updated in the iteration scheme, in a way that depends on the eigenvalue estimates from the most recent iterations. We present a physically-motivated Space-Dependent Wielandt Shift (SDWS) for solving multigroup diffusion eigenvalue problems. The space-dependence of the eigenvalue shift in SDWS enables a more effective acceleration of the power iteration scheme than WS at the beginning of the iteration scheme, when the current estimate of the eigenvalue is not close to the actual eigenvalue. Several variants of SDWS are discussed here, including an SDWS method that combines the strengths of SDWS (in the early iterations) with those of standard WS (in the later iterations). Numerical results from a 1-D multigroup diffusion problem demonstrate an order of magnitude speedup over power iteration and a 41% speedup over a standard WS technique. This speedup is problem-dependent and appears to be greater for 'more difficult' problems. In this summary, the term 'speedup' refers to a reduction in the number of iterations required to converge to the correct eigenvalue and eigenfunction. Because the scattering is treated fully implicitly (i.e., it is part of the left-hand side of the diffusion system and directly inverted), the computational cost of a single iteration does not vary significantly among the methods discussed in this summary. The number of iterations is therefore representative of the total computational cost for a method. We acknowledge that certain iterative solvers for linear systems (e.g., GMRES) require more computational time to converge when the system is nearly singular (i.e., when a very aggressive Wielandt shift is applied). Nonetheless, when using SDWS in the manner described in this summary, we have seen that the reduction in computational time from reducing the number of power iterations generally outweighs the extra computational time required by iterative solvers such as GMRES. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Numerical Solution of Incompressible Navier-Stokes Equations Using a Fractional-Step Approach

A fractional step method for the solution of steady and unsteady incompressible Navier-Stokes equations is outlined. The method is based on a finite volume formulation and uses the pressure in the cell center and the mass fluxes across the faces of each cell as dependent variables. Implicit treatment of convective and viscous terms in the momentum equations enables the numerical stability restrictions to be relaxed. The linearization error in the implicit solution of momentum equations is reduced by using three subiterations in order to achieve second order temporal accuracy for time-accurate calculations. In spatial discretizations of the momentum equations, a high-order (3rd and 5th) flux-difference splitting for the convective terms and a second-order central difference for the viscous terms are used. The resulting algebraic equations are solved with a line-relaxation scheme which allows the use of large time step. A four color ZEBRA scheme is employed after the line-relaxation procedure in the solution of the Poisson equation for pressure. This procedure is applied to a Couette flow problem using a distorted computational grid to show that the method minimizes grid effects. Additional benchmark cases include the unsteady laminar flow over a circular cylinder for Reynolds Numbers of 200, and a 3-D, steady, turbulent wingtip vortex wake propagation study. The solution algorithm does a very good job in resolving the vortex core when 5th-order upwind differencing and a modified production term in the Baldwin-Barth one-equation turbulence model are used with adequate grid resolution.

Kiris, Cetin↗

High-order solution methods for grey discrete ordinates thermal radiative transfer

This work presents a solution methodology for solving the grey radiative transfer equations that is both spatially and temporally more accurate than the canonical radiative transfer solution technique of linear discontinuous finite element discretization in space with implicit Euler integration in time. We solve the grey radiative transfer equations by fully converging the nonlinear temperature dependence of the material specific heat, material opacities, and Planck function. The grey radiative transfer equations are discretized in space using arbitrary-order self-lumping discontinuous finite elements and integrated in time with arbitrary-order diagonally implicit Runge–Kutta time integration techniques. Iterative convergence of the radiation equation is accelerated using a modified interior penalty diffusion operator to precondition the full discrete ordinates transport operator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sonic Boom Prediction and Minimization of the Douglas Reference OPT5 Configuration

Conventional CFD methods and grids do not yield adequate resolution of the complex shock flow pattern generated by a real aircraft geometry. As a result, a unique grid topology and supersonic flow solver was developed at Northrop Grumman based on the characteristic behavior of supersonic wave patterns emanating from the aircraft. Using this approach, it was possible to compute flow fields with adequate resolution several body lengths below the aircraft. In this region, three-dimensional effects are diminished and conventional two-dimensional modified linear theory (MLT) can be applied to estimate ground pressure signatures or sonic booms. To accommodate real aircraft geometries and alleviate the burdensome grid generation task, an implicit marching multi-block, multi-grid finite-volume Euler code was developed as the basis for the sonic boom prediction methodology. The Thomas two-dimensional extrapolation method is built into the Euler code so that ground signatures can be obtained quickly and efficiently with minimum computational effort suitable to the aircraft design environment. The loudness levels of these signatures can then be determined using a NASA generated noise code. Since the Euler code is a three-dimensional flow field solver, the complete circumferential region below the aircraft is computed. The extrapolation of all this field data from a cylinder of constant radius leads to the definition of the entire boom corridor occurring directly below and off to the side of the aircraft's flight path yielding an estimate for the entire noise "annoyance" corridor in miles as well as its magnitude. An automated multidisciplinary sonic boom design optimization software system was developed during the latter part of HSR Phase 1. Using this system, it was found that sonic boom signatures could be reduced through optimization of a variety of geometric aircraft parameters. This system uses a gradient based nonlinear optimizer as the driver in conjunction with a computationally efficient Euler CFD solver (NIIM3DSB) for computing the three-dimensional near-field characteristics of the aircraft. The intent of the design system is to identify and optimize geometric design variables that have a beneficial impact on the ground sonic boom. The system uses a simple wave drag data format to specify the aircraft geometry. The geometry is internally enhanced and analytic methods are used to generate marching grids suitable for the multi-block Euler solver. The Thomas extrapolation method is integrated into this system, and hence, the aircraft's centerline ground sonic boom signature is also automatically computed for a specified cruise altitude and yields the parameters necessary to evaluate the design function. The entire design system has been automated since the gradient based optimization software requires many flow analyses in order to obtain the required sensitivity derivatives for each design variable in order to converge on an optimal solution. Hence, once the problem is defined which includes defining the objective function and geometric and aerodynamic constraints, the system will automatically regenerate the perturbed geometry, the necessary grids, the Euler solution, and finally the ground sonic boom signature at the request of the optimizer.

Siclari, Michael J.↗

Numerical method for predicting flow characteristics and performance of nonaxisymmetric nozzles, theory

The theoretical foundation and formulation of a numerical method for predicting the viscous flowfield in and about isolated three dimensional nozzles of geometrically complex configuration are presented. High Reynolds number turbulent flows are of primary interest for any combination of subsonic, transonic, and supersonic flow conditions inside or outside the nozzle. An alternating-direction implicit (ADI) numerical technique is employed to integrate the unsteady Navier-Stokes equations until an asymptotic steady-state solution is reached. Boundary conditions are computed with an implicit technique compatible with the ADI technique employed at interior points of the flow region. The equations are formulated and solved in a boundary-conforming curvilinear coordinate system. The curvilinear coordinate system and computational grid is generated numerically as the solution to an elliptic boundary value problem. A method is developed that automatically adjusts the elliptic system so that the interior grid spacing is controlled directly by the a priori selection of the grid spacing on the boundaries of the flow region.

Thomas, P. D.↗

On the asymptotic preserving property of the unified gas kinetic scheme for the diffusion limit of linear kinetic models

The unified gas kinetic scheme (UGKS) of K. Xu et al. (2010) [37], originally developed for multiscale gas dynamics problems, is applied in this paper to a linear kinetic model of radiative transfer theory. While such problems exhibit purely diffusive behavior in the optically thick (or small Knudsen) regime, we prove that UGKS is still asymptotic preserving (AP) in this regime, but for the free transport regime as well. Moreover, this scheme is modified to include a time implicit discretization of the limit diffusion equation, and to correctly capture the solution in case of boundary layers. Contrary to many AP schemes, this method is based on a standard finite volume approach, it does neither use any decomposition of the solution, nor staggered grids. Several numerical tests demonstrate the properties of the scheme.

97 MATHEMATICS AND COMPUTING↗

A Simple, Scalable Large Deformation Solid Mechanics Implementation in the MOOSE Framework

This article describes a large deformation solid mechanics solver implemented as part of the freely available and open source MOOSE finite element simulation framework. The article documents the choices made in developing the solid mechanics framework and describes novel formulations for the gradient operator and constitutive modeling framework made to simplify implementations of different coordinate systems, stabilized gradient operators, and different constitutive model inputs and outputs. In the process, the article describes a new formulation that casts objective integration of the Cauchy stress as a linear transformation of the small stress rate. Finally, the article presents key implementation details and examines the parallel efficiency of the solid mechanics solver implemented in MOOSE. The implementation retains a good weak scaling efficiency beyond 1,000 parallel processes. The article includes a discussion of the factors limiting the parallel efficiency of implicit, large deformation solid mechanics codes on current high-performance computers, with the main current limitation being the scalability of the algebraic multigrid methods used to solve the linearized equilibrium equations.

Applied computing → Computer-aided design↗

Inference-Engine v0.1.0

Given a pre-trained neural network, Inference-Engine performs maps network inputs to outputs by executing the forward pass through the provided network. Although the predominant programming language for machine-learning is Python, most high-performance computing (HPC) applications are written in Fortran, C, or C++. Inference-Engine aims to support HPC programs and is written in Fortran, a language with a large feature set supporting interoperability with C. This software exposes concurrency in a portable way by using standard language features that some modern Fortran compilers can exploit with various optimizations, including offloading computation to a Graphics Processing Unit (GPU). In particular, this software makes extensive use of Fortran's "do concurrent" parallel loop construct, implicitly parallel array statements, and pure procedures that can be invoked inside "do concurrent" blocks. Inference-Engine also supports dynamic choice of inference methods at runtime. Two current options include one method that uses Fortran's "dot_product" intrinsic function inside "do concurrent" blocks and another method that instead uses Fortran' "matmul" array intrinsic function. We plan to investigate automatic compiler offloading of "do concurrent" calculations to GPUs and compile-time substitution of optimized libraries such as the Basic Linear Algebra Library (BLAS) for "matmul" invocations. We also envision the potential for the choice of which method to use could happen at program launch based on in situ performance measurements on any given platform.

Rouson, Damian↗