Search NASA⌕ Search

SEARCH · Search NASA

Results for “Integrated Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Experimental study for the feasibility of using hard x-rays for micro-XRF analysis of multilayered metals

Application of polycapillary optical systems to improve a spatial resolution for the μ-XRF analysis by focusing a primary x-ray beam and/or by collecting fluorescence emission is well known. The challenge is to optimize them in combination with x-ray source for exciting K-lines above 20 keV that could allow characterization of many materials composed by heavy elements. To pursue this goal, preliminary studies on possible polycapillary lens employment in thickness determination for multilayer metal materials will be presented in this work. In this paper, the results of first attempts of integrating PyMCA with Monte Carlo simulation code (XMI-MSIM) that takes into account the secondary fluorescence effects on quantitative analysis of homogeneous matrices, in particular, metal alloys, are presented.

36 MATERIALS SCIENCE↗

Coherent kilo-electron-volt backscattering from plasma-wave boosted relativistic electron mirrors

A different parameter regime of laser wakefield acceleration driven by sub-petawatt femtosecond lasers is proposed, which enables the generation of relativistic electron mirrors further accelerated by the plasma wave. Integrated particle-in-cell simulation, including both the mirror formation and Thomson scattering, demonstrates that efficient coherent backscattering up to keV photon energy can be obtained with moderate driving laser intensities and high density gas targets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of the Marble experimental platform at the National Ignition Facility

The Marble experimental platform at the National Ignition Facility (NIF) was developed to quantify the influence of heterogeneous mix on fusion burn. The platform utilizes a plastic capsule filled with a deuterated plastic foam of controlled coarseness, with tritium gas filling the voids in the foam. The capsule implosion is driven with x rays generated in an NIF Hohlraum in which the time-dependent symmetry of the implosion can be controlled via dynamic beam phasing. Importantly, the Hohlraum drive conditions can be understood via integrated 2D radiation-hydrodynamic simulations, and capsule implosions can be reliably calculated. After several years of development and experimentation, the NIF Marble platform has become successful and has produced important experimental results. Here, the experimental results, which will be presented in a future publication by the LANL Marble team, provide the first definitive examination of the influence of heterogeneous mix on thermonuclear burn.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of the drive design on ablation front hydrodynamic instability growth in a capsule implosion at the National Ignition Facility

A critical aspect of inertial confinement fusion experiments lies in the control of ablation front instabilities during the implosion process. The growth of Rayleigh–Taylor and Richtmyer–Meshkov instabilities, seeded by target defects, can significantly degrade the performance of the implosion. Here, this study explores the influence of drive design on ablation front stability using the hydro-growth radiography platform at the National Ignition Facility. This platform allows the measurement of the ablation front hydrodynamic instability growth. Because these measurements are restricted to early convergence, their primary role is to constrain the initial instability growth and benchmark the simulations used to infer shell integrity and performance at peak velocity and ignition. Three ignition designs, Hybrid-E (HyE), SQ-n (“S” for scaling and “Q” for quality), and High temperature, High thickness (HiT) were analyzed. The results demonstrated a high dependence of the growth factor on the choice of design, capsule scale as well as the hohlraum conditions, mainly the radiative temperature and the gold M-band emission. HyE and SQ-n display a similar growth factor range, but their evolution is different due to the design differences in hohlraum conditions. HiT has the lowest growth factor of the studied designs, which is a result of a higher radiative temperature. These results highlight the importance of design choices in controlling instability dynamics. These insights inform future drive design strategies to enhance stability and efficiency in fusion ignition experiments.

Physics↗

Structured electrolytes facilitate Grotthuss-type transport for enhanced proton-coupled electron transfer reactions

Concentrated hydrogen-bonded electrolytes (CoHBEs) are structured, electrochemically stable, less-volatile alternatives to aqueous and dilute nonaqueous electrolytes, however, with high viscosities that limit molecular diffusion. This work provides an understanding of the proton conduction mechanism in CoHBEs based on mixtures of acids and azoles and establishes a link between the structurally dictated transport properties and the proton-coupled electron transfer (PCET) reaction rates that can be leveraged for enhancing electrochemical reactions. Diffusion and relaxation NMR studies suggest a breaking of the viscosity–conductivity tradeoff, where at high azole concentrations (>45 mol%), Grotthuss transport is more likely with lowered proton transfer energy barriers between the azole and the acid according to the machine learning (ML) accelerated ab initio path integral MD (AI-PIMD) simulations. Proton conduction pathways are found to be switchable between the hydrogen bonding networks of the acid and the azole, with imidazole chain forming structures better facilitating Grotthuss hopping. Supported by small-angle neutron scattering studies, the chains are found to have six member molecules on average with maximum of 3 to 4 imidazole/imidazoliums at 50 to 60 mol%. Despite their high viscosities, the measured PCET rates for quinones and phenazines measured in the protic CoHBEs present relatively high electron transfer rate constants (k 0 ~ 10 −4 cm/s), validated by rotating disc electrode and scanning electrochemical microscopy measurements. The results demonstrate that strategic tuning of hydrogen-bond donor–acceptor interactions enables the decoupling of proton transport and viscosity, thereby impacting PCET reactions.

electrokinetics↗

Code Benchmark of the HTTF Pressurized Conduction Cooldown Test Using SAM

The High Temperature Test Facility (HTTF) at Oregon State University is an integral system test facility to simulate postulated reactor transients of prismatic high-temperature gas-cooled reactors(HTGRs). A series of test campaigns was launched, providing abundant test data that could be used to benchmark reactor system analysis codes like the System Analysis Module (SAM). In this study, a SAM model of the facility is developed based on the two-dimensional (2D) ring model approach. All components including the ceramic matrix, graphite heaters, helium coolant channels, core barrel, upcomer, pressure vessel, and reactor cavity cooling system are modeled as concentric cylindrical rings. The model is used to simulate one of the benchmark problems-Pressurized Conduction Cooldown (PCC)-within the scope of the Organisation for Economic Co-operation and Development Nuclear Energy Agency International HTTF Benchmark. The simulations consist of two parts. In the first part, operating and boundary conditions as well as thermophysical properties of materials are specified for the benchmark problem. In this work, results from the first part will be used in code-to-code comparison. In the second part, the SAM model is used to simulate Test PG-27, which is the first PCC test carried out in the HTTF, with only two of the ten heater banks activated. The results in the second part are used for code-to-data comparison. Because the helium coolant flow rate is not measured in this facility, it is estimated using the input power and inlet/outlet coolant temperatures. Additionally, radial heat flow in the ceramic blocks is complicated by hundreds of cylindrical coolant channels and heater rods embedded in them. As such, it is necessary to deduce an effective thermal conductivity for the ceramic to analyze the core thermal behavior. SAM predictions of the helium coolant and ceramic temperatures are compared with test data measured in three equivalent sectors. Overall, the SAM results agree reasonably well with test data within the variation of data among the three sectors, which demonstrates SAM's capability in capturing transient effects in HTGR using the simplified 2D ring model.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Core-Pedestal Plasma Configurations in Advanced Tokamaks

Here, several configurations for the core and pedestal plasma are examined for a predefined tokamak design by implementing multiple heating/current drive (H/CD) sources to achieve an optimum configuration of high fusion power in a noninductive operation while maintaining an ideally magnetohydrodynamic (MHD) stable core plasma using the IPS-FASTRAN framework. IPS-FASTRAN is a component-based lightweight coupled simulation framework that is used to simulate magnetically confined plasma by integrating a set of high-fidelity codes to construct the plasma equilibrium (EFIT, TOQ, and CHEASE), calculate the turbulent heat and particle transport fluxes (TGLF), model various H/CD systems (TORIC, TORAY, GENRAY, and NUBEAM), model the pedestal pressure and width (EPED), and estimate the ideal MHD stability (DCON). The TGLF core transport model and EPED pedestal model are used to self-consistently predict plasma profiles consistent with ideal MHD stability and H/CD (and bootstrap) current sources. In order to evaluate the achievable and sustainable plasma beta, varying configurations are produced ranging from the no-wall stability to with-wall stability regimes, simultaneously subject to the self-consistent TGLF, EPED, and H/CD source profile predictions that optimize configuration performance. The pedestal density, plasma current, and total injected power are scanned to explore their impact on the target plasma configuration, fusion power, and confinement quality. A set of fully noninductive scenarios are achieved by employing ion-cyclotron, neutral beam injection, helicon, and lower-hybrid H/CDs to provide a broad profile for the total current drive in the core region for a predefined tokamak design. These noninductive scenarios are characterized by high fusion gain (Q ~ 4) and power (P fus ~ 600 MW), optimum confinement quality (H 98 ~ 1.1), and high bootstrap current fraction (f BS ~ 0.7) for Greenwald fraction below unity. The broad current profile configurations identified are stable to low-n kink modes either because the normalized pressure β N is below the no-wall limit or a wall is present.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DARK MATTER SUB-HALO COUNTS VIA STAR STREAM CROSSINGS

Dark matter sub-halos create gaps in the stellar streams orbiting in the halos of galaxies. We evaluate the sub-halo stream crossing integral with the guidance of simulations to find that the linear rate of gap creation, R{sub U}, in a typical cold dark matter (CDM) galactic halo at 100 kpc is R{sub U}{approx_equal}0.0066 M-hat{sub 8}{sup -0.35}kpc{sup -1}Gyr{sup -1}, where M-hat{sub 8}({identical_to} M-hat /10{sup 8} M{sub Sun }) is the minimum mass halo that creates a visible gap. The relation can be recast entirely in terms of observables, as R{sub U}{approx_equal}0.059w{sup -0.85}kpc{sup -1}Gyr{sup -1}, for w in kpc, normalized at 100 kpc. Using published data, the density of gaps is estimated for M31's NW stream and the Milky Way Pal 5 stream, Orphan stream, and Eastern Banded Structure. The estimated rates of gap creation all have errors of 50% or more due to uncertain dynamical ages and the relatively noisy stream density measurements. The gap-rate-width data are in good agreement with the CDM-predicted relation. The high density of gaps in the narrow streams requires a total halo population of 10{sup 5} sub-halos above a minimum mass of 10{sup 5} M{sub Sun }.

79 ASTRONOMY AND ASTROPHYSICS↗

NEAR-INFRARED IMAGING OF A z = 6.42 QUASAR HOST GALAXY WITH THE HUBBLE SPACE TELESCOPE WIDE FIELD CAMERA 3

We report on deep near-infrared F125W (J) and F160W (H) Hubble Space Telescope Wide Field Camera 3 images of the z = 6.42 quasar J1148+5251 to attempt to detect rest-frame near-ultraviolet emission from the host galaxy. These observations included contemporaneous observations of a nearby star of similar near-infrared colors to measure temporal variations in the telescope and instrument point-spread function (PSF). We subtract the quasar point source using both this direct PSF and a model PSF. Using direct subtraction, we measure an upper limit for the quasar host galaxy of m{sub J} > 22.8 and m{sub H} > 23.0 AB mag (2 {sigma}). After subtracting our best model PSF, we measure a limiting surface brightness from 0.''3 to 0.''5 radius of {mu}{sub J} > 23.5 and {mu}{sub H} > 23.7 AB mag arcsec{sup -2} (2 {sigma}). We test the ability of the model subtraction method to recover the host galaxy flux by simulating host galaxies with varying integrated magnitude, effective radius, and Sersic index, and conducting the same analysis. These models indicate that the surface brightness limit ({mu}{sub J} > 23.5 AB mag arcsec{sup -2}) corresponds to an integrated upper limit of m{sub J} > 22-23 AB mag, consistent with the direct subtraction method. Combined with existing far-infrared observations, this gives an infrared excess log (IRX) > 1.0 and corresponding ultraviolet spectral slope {beta} > -1.2 {+-} 0.2. These values match those of most local luminous infrared galaxies, but are redder than those of almost all local star-forming galaxies and z {approx_equal} 6 Lyman break galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Smart pixel sensors: towards on-sensor filtering of pixel clusters with deep learning

Highly granular pixel detectors allow for increasingly precise measurements of charged particle tracks. Next-generation detectors require that pixel sizes will be further reduced, leading to unprecedented data rates exceeding those foreseen at the High- Luminosity Large Hadron Collider. Signal processing that handles data incoming at a rate of $\mathcal{O}$(40 MHz) and intelligently reduces the data within the pixelated region of the detector at rate will enhance physics performance at high luminosity and enable physics analyses that are not currently possible. Using the shape of charge clusters deposited in an array of small pixels, the physical properties of the traversing particle can be extracted with locally customized neural networks. In this first demonstration, we present a neural network that can be embedded into the on-sensor readout and filter out hits from low momentum tracks, reducing the detector's data volume by 57.1%–75.7%. The network is designed and simulated as a custom readout integrated circuit with 28 nm CMOS technology and is expected to operate at less than 300 μW with an area of less than 0.2 mm 2 . The temporal development of charge clusters is investigated to demonstrate possible future performance gains, and there is also a discussion of future algorithmic and technological improvements that could enhance efficiency, data reduction, and power per area.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Storage of arbitrary two-charge-qubit states in a single {sup 87}Rb cold-atom ensemble

We propose a scheme for storing arbitrary states of two superconducting charge qubits in a single {sup 87}Rb cold-atom ensemble. The information of the two charge qubits is transferred sequentially into the single atomic ensemble, via a transmission line resonator serving as 'data bus'. We simulate the storage process by integrating the master equation that takes into account all kinds of decoherence mechanisms, and show that the mean storage fidelity is very high with the present experimental parameters. Moreover, the storage efficiency of the single ensemble in our scheme is double that of previous schemes. Finally, we also briefly discuss the possibilities and difficulties of extending it to multiqubit cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Beam-dynamics driven design of the LHeC energy-recovery linac

The LHeC study is a possible upgrade of the LHC that aims at delivering an electron beam for collisions with the existing hadronic beams. The current baseline design for the electron facility consists of a multi-pass superconducting energy-recovery linac operating in a continuous wave mode. Here, we summarize the overall layout of such ERL complex located on the LHC site and introduce the most recent developments. We review of the lattice components, presenting their baseline design along with possible alternatives that aims at improving the overall machine performance. The detector bypass has been designed and integrated into the lattice. Tracking simulations allowed us to verify the high current (~150 mA in the linacs) beam operation required for the LHeC to serve as an Higgs Factory. The impact of single and multi-bunch wake-fields, synchrotron radiation and beam-beam effects has been assessed in this paper.

43 PARTICLE ACCELERATORS↗

Neural Lyapunov Differentiable Predictive Control

We present a learning-based predictive control methodology using the differentiable programming framework with sufficient Lyapunov-based guarantees. The neural Lyapunov differentiable predictive control (NLDPC) learns the policy by constructing a computational graph encompassing the system dynamics, state, and input constraints, and the necessary Lyapunov certification constraints, and thereafter using the automatic differentiation to update the neural policy parameters. In conjunction, our approach jointly learns a Lyapunov function that certifies the regions of state-space with stable dynamics. We also provide an initial condition sampling-based statistical guarantee for the training of NLDPC. Our offline training approach provides a computationally efficient and scalable alternative to classical model predictive control solutions, which now directly comes with Lyapunov based guarantees as shown in this paper. We substantiate the advantages of the proposed approach with simulations to stabilize the double integrator model and on an example of controlling an aircraft model.

Mukherjee, Sayak↗

A Comparison of Machine Learning Methods for Frequency Nadir Estimation in Power Systems

An increasing penetration level of inverter-based renewable energy resources changes the inertia of power systems, posing challenges for maintaining the desired system frequency stability. An accurate frequency nadir estimation is crucial for power system operators to prepare preventive actions against large frequency excursions. In this paper, five machine learning methods - linear regression, gradient boosting, support vector regression, an artificial neural network, and XGBoost - are applied to two different datasets, i.e., 1) the unit generation dataset and 2) the system total inertia and headroom dataset, for the prediction of the frequency nadir. The training and testing datasets are generated through extensive generation scheduling simulations using Multi-timescale Integrated Dynamic and Scheduling (MI-DAS) toolbox on the Western Electricity Coordinating Council 240-bus system with high renewable penetration levels. Numerical results show that all five machine learning methods perform well in predicting the nadir frequency of the system. Among them, the gradient boosting and the XGBoost are clear winners yielding the best prediction accuracy in terms of four evaluation metrics.

data driven↗

Robust Decentralized Secondary Frequency Control in Power Systems: Merits and Trade-Offs

Frequency restoration in power systems is conven- tionally performed by broadcasting a centralized signal to local controllers. As a result of the energy transition, technological advances, and the scientific interest in distributed control and optimization methods, a plethora of distributed frequency control strategies have been proposed recently that rely on communication amongst local controllers. In this paper we propose a fully decentralized leaky integral controller for frequency restoration that is derived from a classic lag element. We study steady-state, asymptotic optimality, nominal stability, input-to-state stability, noise rejection, transient performance, and robustness properties of this controller in closed loop with a nonlinear and multivariable power system model. Here, we demonstrate that the leaky integral controller can strike an acceptable trade-off between performance and robustness as well as between asymptotic disturbance rejection and transient convergence rate by tuning its DC gain and time constant. We compare our findings to conventional decentralized integral control and distributed- averaging-based integral control in theory and simulations.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Distribution System State Estimation Using a Multiple Iteration Extended Kalman Filter Approach

To support the operation of modern distribution systems, operators require real-time visibility into system states. Due to a lack of measurements and unbalanced operation, the state estimation in distribution systems is challenging as compared to transmission systems. This paper proposes the utilization of a Multiple Iteration - Extended Kalman Filter based approach for the distribution system state estimation. This modified version of the baseline extended Kalman filter iterates over the update step multiple times thereby reducing the estimation error. The proposed algorithm along with the auxiliary algorithms such as bad data detection is integrated into a co-simulation environment. Case studies show that the proposed state estimation method can result in a lesser estimation error as compared to the baseline approach.

Bhatti, Bilal Ahmad↗

Physiological Controls on Carbon Fluxes and Biomass Production in Miscanthus: Insights From a Process‐Based Agroecosystem Model

Biomass crops serve as essential feedstocks for renewable energy and bioproducts and play a critical role in achieving lower emissions in the transportation sector. However, dedicated perennial biomass crops such as Miscanthus × giganteus (Miscanthus) remain underrepresented in process-based agroecosystem models, limiting robust evaluation of their economic and environmental performance. In this study, we developed a data-constrained representation of the sterile triploid Miscanthus (IL clone) within the process-based model ecosys, integrating global sensitivity analysis, ensemble simulation, and parameter calibration. Planting, harvesting, and fertilization practices consistent with field management were incorporated, and phenology was constrained using PhenoCam-derived Green Chromatic Coordinate (GCC) data. Using the Morris global sensitivity analysis method, we identified 11 key physiological parameters governing plant carbon, water, and nutrient relations, particularly processes associated with CO 2 assimilation. We then conducted ensemble simulations by perturbing these parameters and calibrated the model against eddy covariance fluxes and field-measured biomass. Building on the calibrated operating state, parameter-response analyses show that different photosynthetic processes influence productivity in different ways. Protein allocation determines whether productivity increases toward a higher level, whereas electron transport capacity controls additional gains once protein allocation approaches saturation. These findings demonstrate that parameter importance depends on physiological context and on which photosynthetic processes remain limiting. Calibration and validation against observations show that ecosys can reliably reproduce carbon and water fluxes, as well as both above- and belowground biomass, with post-calibration GPP R 2 improving from 0.67 to 0.95 during the calibration period and remaining high during validation (R 2 = 0.95). These results provide a mechanistic foundation for regional simulations and sustainable bioenergy assessments.

ecosys↗

Investigation of the spectrum of high-energy muons by the method of multiple interactions on the basis of data from the Baksan underground scintillation telescope

Experimental data obtained with the aid of the Baksan underground scintillation telescope over a long period of its operation are analyzed with the aim of searches for an excess flux of ultrahigh-energy ({>=}100 TeV)muons. The multiple-interaction method, which is based on the ideas of the pair-meter technique, is used to analyze the energy spectrum of the muons. The phenomenological parameters of this method and its sensitivity to the shape of the spectrum are discussed. The experimental distributions are compared with the results of calculations for various versions of the muon spectrum. The possibility of separating ultrahigh-energy muons that fly in the vicinity of the axis of extensive air showers is assessed on the basis of the integrated number of recorded and simulated events featuring large energy depositions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗