Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Self-generating oscillating pressure exercise device

An exercise device, especially suitable for zero gravity workouts, has a collapsible chamber which generates negative pressure on the lower portion of a body situated therein. The negative pressure is generated by virtue of leg, hand and shoulder interaction which contracts and expands the chamber about the person and by virtue of air flow regulation by valve action.

Watenpaugh, Donald E.↗

Phase 2: HGM air flow tests in support of HEX vane investigation

Following the start of SSME certification testing for the Pratt and Whitney Alternate Turbopump Development (ATD) High Pressure Oxidizer Turbopump (HPOTP), cracking of the leading edge of the inner HEX vane was experienced. The HEX vane, at the inlet of the oxidizer bowl in the Hot Gas Manifold (HGM), accepts the HPOTP turbine discharge flow and turns it toward the Gaseous Oxidizer Heat Exchanger (GOX HEX) coil. The cracking consistently initiated over a specific circumferential region of the hex vane, with other circumferential locations appearing with increased run time. Since cracking had not to date been seen with the baseline HPOTP, a fluid-structural interaction involving the ATD HPOTP turbine exit flowfield and the HEX inner vane was suspected. As part of NASA contract NAS8-36801, Pratt and Whitney conducted air flow tests of the ATD HPOTP turbine turnaround duct flowpath in the MSFC Phase 2 HGM air flow model. These tests included HEX vane strain gages and additional fluctuating pressure gages in the turnaround duct and HEX vane flowpath area. Three-dimensional flow probe measurements at two stations downstream of the turbine simulator exit plane were also made. Modifications to the HPOTP turbine simulator investigated the effects on turbine exit flow profile and velocity components, with the objective of reproducing flow conditions calculated for the actual ATD HPOTP hardware. Testing was done at the MSFC SSME Dynamic Fluid Air Flow (Dual-Leg) Facility, at air supply pressures between 50 and 250 psia. Combinations of turbine exit Mach number and pressure level were run to investigate the effect of flow regime. Information presented includes: (1) Descriptions of turbine simulator modifications to produce the desired flow environment; (2) Types and locations for instrumentation added to the flow model for improved diagnostic capability; (3) Evaluation of the effect of changes to the turbine simulator flowpath on the turbine exit flow environment; and (4) Comparison of the experimental turbine exit flow environment to the environment calculated for the ATD HPOTP.

Cox, G. B., Jr.↗

Guidance, navigation, and control study for a solar electric propulsion spacecraft

A preliminary investigation of a lunar-comet rendezvous mission using a solar electric propulsion (SEP) spacecraft was performed in two phases.The first phase involved exploration of the moon and the second involved rendezvous with a comet. The initial phase began with a chemical propulsion translunar injection and chemical insertion into a lunar orbit, followed by a low thrust SEP transfer to a circular, polar, low-lunar orbit. After collecting scientific data at the moon, the SEP spacecraft performed a spiral lunar escape maneuver to begin the interplanetary leg of the mission. After escape from the Earth-moon system, the SEP spacecraft maneuvered in interplanetary space and performed a rendezvous with a comet.The immediate goal of this study was to demonstrate the feasibility of using a low-thrust SEP spacecraft for orbit transfer to both the moon and a comet. Another primary goal was to develop a computer optimization code which would be robust enough to obtain minimum-fuel rendezvous trajectories for a wide range of comets.

Kluever, Craig A.↗

Coronal mass ejections in the solar wind at high solar latitudes: An overview

Ulysses provided the first direct measurements of coronal mass ejections (CME's) in the solar wind at high heliographic latitudes. An overview of new results from the plasma experiment on Ulysses and magnetic field measurements, during the spacecraft's first excursion to high solar latitudes are summarized. A striking aspect of the high-latitude CME's observed is that they all had high speeds, with the overall average speed being 730 km/sec. A new class of forward-reverse shock pairs, associated with expansion of CME's was discovered at high latitudes. Of six certain CME's observed at high latitudes, three have associated shock pairs of this nature. Combined Ulysses and Yohkoh observations suggest that the flux rope topology characteristic of some CME's results from reconnection within the legs of neighboring magnetic loops embedded within the escaping CME's.

Gosling, Jack T.↗

Observational tests for nonequilibrium ionization in the solar corona

Nonequilibrium ionization may be produced by a variety of processes in the solar corona, for example, by mass flows through the large temperature gradients of the transition region or by impulsive heating and cooling. Any deviation from equilibrium ionization would have a strong effect on the radiation from the corona and on the interpretation of solar observations; hence, it is important to determine observational signatures of nonequilibrium. The temperature-sensitive line ratios can be used as such signatures. We examine the line ratios: C IV I(1548.2 A)/I(312.4 A), O IV I(789.4 A)/I(554.4 A), O V I(629.7 A)/I(172.2 A), O VI I(1031.9 A)/I(173.0 A) and O VI I(1031.9 A)/I(150.1 A). These line ratios are calculated for four coronal loop models that have a steady flow and that are known to have significant departures from equilibrium ionization. Our results indicate that, in general, nonequilibrium causes a considerable reduction in the line ratios, more than an order of magnitude in the downflowing leg of the loop model with the largest mass flows. We find that the C IV line ratio is the most sensitive to nonequilibrium. We discuss the implications of our results for observations, specifically, the observations expected from the upcoming SOHO mission.

Spadaro, D.↗

A forward-reverse shock pair in the solar wind driven by over-expanison of a coronal mass ejection: Ulysses observations

A previously unidentified type of solar wind forward-reverse shock pair has been observed by Ulysses at 4.64 AU and S32.5 deg. In contrast to most solar wind forward-reverse shock pairs, which are driven by the speed difference between fast solar wind plasma and slower plasma ahead, this particular shock pair was driven purely by the over-expansion of a coronal mass ejection (CME) in transit from the Sun. A simple numerical simulation indicates that the over-expansion was a result of a high initial internal plasma and magnetic field pressure within the CME. The CME observed at 4.64 AU had the internal field structure of a magnetic flux rope. This event was associated with a solar disturbance in which new magnetic loops formed in the corona almost directly beneath Ulysses approximately 11 days earlier. This association suggests that the flux rope was created as a result of reconnection between the 'legs' of neighboring magnetic loops within the rising CME.

Gosling, J. T.↗

Vertical velocity in oceanic convection off tropical Australia

Time series of 1-Hz vertical velocity data collected during aircraft penetrations of oceanic cumulonimbus clouds over the western Pacific warm pool as part of the Equatorial Mesoscale Experiment (EMEX) are analyzed for updraft and downdraft events called cores. An updraft core is defined as occurring whenever the vertical velocity exceeds 1 m/sec for at least 500 m. A downdraft core is defined analogously. Over 19,000 km of straight and level flight legs are used in the analysis. Five hundred eleven updraft cores and 253 downdraft cores are included in the dataset. Core properties are summarized as distributions of average and maximum vertical velocity, diameter, and mass flux in four altitude intervals between 0.2 and 5.8 km. Distributions are approximately lognormal at all levels. Examination of the variation of the statistics with height suggests a maximum in vertical velocity between 2 and 3 km; slightly lower or equal vertical velocity is indicated at 5 km. Near the freezing level, virtual temperature deviations are found to be slightly positive for both updraft and downdraft cores. The excess in updraft cores is much smaller than that predicted by parcel theory. Comparisons with other studies that use the same analysis technique reveal that EMEX cores have approximately the same strength as cores of other oceanic areas, despite warmer sea surface temperatures. Diameter and mass flux are greater than those in the Global Atmospheric Research Program (GATE) but smaller than those in hurricane rainbands. Oceanic cores are much weaker and appear to be slightly smaller than those observed over land during the Thunderstorm Project. The markedly weaker oceanic vertical velocities below 5.8 km (compared to the continental cores) cannot be attributed to smaller total convective available potential energy or to very high water loading. Rather, it is suggested that water loading, although less than adiabatic, is more effective in reducing buoyancy of oceanic cores because of the smaller potential buoyancy below 5.8 km. Entrainment appears to be more effective in reducing buoyancy to well below adiabatic values in oceanic cores, a result consistent with the smaller oceanic core diameters in the lower cloud layer. It is speculated further that core diameters are related to boundary layer depth, which is clearly smaller over the oceans.

Lucas, Christopher↗

A test of source-surface model predictions of heliospheric current sheet inclination

The orientation of the heliospheric current sheet predicted from a source surface model is compared with the orientation determined from minimum-variance analysis of International Sun-Earth Explorer (ISEE) 3 magnetic field data at 1 AU near solar maximum. Of the 37 cases analyzed, 28 have minimum variance normals that lie orthogonal to the predicted Parker spiral direction. For these cases, the correlation coefficient between the predicted and measured inclinations is 0.6. However, for the subset of 14 cases for which transient signatures (either interplanetary shocks or bidirectional electrons) are absent, the agreement in inclinations improves dramatically, with a correlation coefficient of 0.96. These results validate not only the use of the source surface model as a predictor but also the previously questioned usefulness of minimum variance analysis across complex sector boundaries. In addition, the results imply that interplanetary dynamics have little effect on current sheet inclination at 1 AU. The dependence of the correlation on transient occurrence suggests that the leading edge of a coronal mass ejection (CME), where transient signatures are detected, disrupts the heliospheric current sheet but that the sheet re-forms between the trailing legs of the CME. In this way the global structure of the heliosphere, reflected both in the source surface maps and in the interplanetary sector structure, can be maintained even when the CME occurrence rate is high.

Burton, M. E.↗

Solar flare model atmospheres

Solar flare model atmospheres computed under the assumption of energetic equilibrium in the chromosphere are presented. The models use a static, one-dimensional plane-parallel geometry and are designed within a physically self-consistent coronal loop. Assumed flare heating mechanisms include collisions from a flux of nonthermal electrons and X-ray heating of the chromosphere by the corona. The heating by energetic electrons accounts explicitly for variations of the ionized fraction with depth in the atmosphere. X-ray heating of the chromosphere by the corona incorporates a flare loop geometry by approximating distant portions of the loop with a series of point sources, while treating the loop leg closest to the chromospheric footpoint in the plane-parallel approximation. Coronal flare heating leads to increased heat conduction, chromospheric evaporation and subsequent changes in coronal pressure; these effects are included self-consistently in the models. Cooling in the chromosphere is computed in detail for the important optically thick H I, Ca II and Mg II transitions using the non-local thermodynamic equilibrium (non-LTE) prescription in the program MULTI. Hydrogen ionization rates from X-ray photoionization and collisional ionization by nonthermal electrons are included explicitly in the rate equations. The models are computed in the 'impulsive' and 'equilibrium' limits, and in a set of intermediate 'evolving' states. The impulsive atmospheres have the density distribution frozen in the pre-flare configuration, while the equilibrium models assume the entire atmosphere is in hydrostatic and energetic equilibrium. The evolving atmospheres represent intermediate stages where hydrostatic equilibrium has been established in the chromosphere and corona, but the corona is not yet in energetic equilibrium with the flare heating source. Thus, for example, chromospheric evaporation is still in the process of occurring. We have computed the chromospheric radiation that results from a range of coronal heating rates, with particular emphasis on the widely observed diagnostic H(alpha). Our conclusion is that the H(alpha) fluxes and profiles actually observed in flares can only be produced under conditions of a low-pressure corona with strong beam heating. Therefore we suggest that H(alpha) in flares is produced primarily at the footprints of newly heated loops where significant evaporation has not yet occurred. As a single loop evolves in time, no matter how strong the heating rate may become, the H(alpha) flux will diminish as the corona becomes denser and hence more effective at stopping the beam. This prediction leads to several observable consequences regarding the spatial and temporal signatures of the X-ray and H(alpha) radiation during flares.

Hawley, Suzanne L.↗

Evidence for siphon flows with shocks in solar magnetic flux tubes

We synthesize profiles of the infrared line Fe I 15648.5 A (g = 3) for a recently developed theoretical model of siphon flows along photospheric magnetic loops. The synthesized line profiles are compared with the observations from which Rueedi et al. (1992) deduced the presence of such flows across the neutral line of an active region plage. This comparison supports the interpretation of Rueedi et al. (1992). It also suggests that the average footpoint separation of the observed loops carrying the siphon flow is 8-15 sec and that the siphon flow experiences a standing tube shock in the downstream leg near the top of the arch.

Degenhardt, D.↗

A case study of the mountain lee wave event of January 6, 1992

A mountain wave event, observed at the southern tip of Greenland on January 6, 1992, was corroborated by three experiments: the Meteorological Measurement System (MMS), the Microwave Temperature Profiler (MTP), and the Reactive Nitrogen Instrument (NO/NO(y)). Gravity wave signatures with classical phase relationship between wind and temperature were observed on both the outbound and inbound legs at different altitudes. The waves showed both vertically propagating and evanescent properties. Characteristics of the dominant wave mode are: wavelength about = 35 km; vertical displacement about = 0.8 km, and peak-to-peak vertical wind about = 6/ms. With the prevailing wind at about = 37/ms, the stratospheric temperature was reduced by 6K to 195.5 K within 8 minutes. The implication and potential impact of mountain lee waves on the formation of polar stratospheric clouds (PSC's) are discussed.

Chan, K. R.↗

Observations of topographic planetary waves in the Bering Slope Current using the Geosat altimeter

Topographic planetary waves associated with the downstream leg of the Bering Slope Current are observed in measurements of sea surface height anomalies acquired by the Geosat altimeter during 1987 and 1988 The waves are most prominent from May to August 1987, during which time the estimated wave period and wavelength are about 72 days and 103 km, respectively. The direction of propagation is roughly north-northeast.

Okkonen, Stephen R.↗

Galileo: Challenges enroute to Jupiter

The Galileo spacecraft is now on its three-year direct Earth-to-Jupiter transfer trajectory. Jupiter arrived (Probe entry) is scheduled for 2:05 pm PST, December 7, 1995. The Galileo Probe will be the first human-made object to enter the atmosphere of an outer planet, while the Orbiter will be the first artificial satellite of an outer planet. A two-year Jupiter orbital mission is planned. Following launch on October 18, 1989, Galileo spent just over three years executing its Venus-Earth-Earth Gravity Assist (VEEGA) mission phase to achieve the heliocentric energy necessary to reach Jupiter. Midway through its Earth-to-Earth leg, on October 29, 1991, Galileo became the first spacecraft to encounter an asteroid. Six months earlier in April 1991, the spacecraft's high-gain antenna (HGA) failed to deploy properly. The special guidance, navigation, and control (GN&C) problems associated with a 20-month campaign of maneuvers to free the stuck antenna and successfully perform the asteroid encounter without it are described. The overall mission and spacecraft status are also reported.

O'Neil, William J.↗

NASA's extended duration orbiter medical program

The physiological issues involved in safely extending Shuttle flights from 10 to 16 days have been viewed by some as academic. After all, they reasoned, humans already have lived and worked in space for periods exceeding even 28 days in the United States Skylab Program and onboard the Russian space stations. The difference in the Shuttle program is in the physical position of the astronauts as they reenter the Earth's atmosphere. Crewmembers in the earlier Apollo, Skylab, and Russian programs were returned to Earth in the supine position. Space Shuttle crewmembers, in contrast, are seated upright during reentry and landing; reexperiencing the Earth's g forces in this position has far more pronounced effects on the crewmember's physiological functions. The goal of the Extended Duration Orbiter (EDO) Medical Project (EDOMP) has been to ensure that crewmembers maintain physiological reserves sufficient to perform entry, landing, and egress safely. Early in the Shuttle Program, it became clear that physiological deconditioning during space flight could produce significant symptoms upon return to Earth. The signs and symptoms observed during the entry, landing, and egress after Shuttle missions have included very high heart rates and low blood pressures upon standing. Dizziness, 'graying out,' and fainting have occurred on ambulation or shortly thereafter. Other symptoms at landing have included headache, light-headedness, nausea and vomitting, leg cramping, inability to stand for several minutes after wheel-stop, and unsteadiness of gait.

Pool, Sam Lee↗

Structure of mass-loading shocks. 2: Comparison of theory and observation at comet Halley

The multifluid diffusive model of G. P. Zank et al. (1994), which describes the interaction of the solar wind with a cometary plasma in the outer coma, has been used to model the structure of the Halley bow shock. The theoretical results are compared to in situ observations made by Giotto. We compare the solar wind and cometary ion number densities and pressures upstream and through the quasi-perpendicular and quasi-parallel shocks (observed on the inbound and outbound legs of the encounter, respectively). In general, good agreement is found between theory and observations in terms of shock structure, strength, and location, especially for the quasi-parallel shock. The comparison between tha quasi-perpendicular shock observations and theory is complicated by the apparently nonstationary behavior of the shock, a feature which has been remarked upon by other investigators. The cometary bow shock appears to be an excellent example of an energetic-particle-mediated shock where the energetic particles comprise less than 10% of the total number density.

Zank, G. P.↗

Optimal lunar trajectories for a combined chemical-electric propulsion spacecraft

Spacecraft which utilize electric propulsion (EP) systems are capable of delivering a greater payload fraction compared to spacecraft using conventional chemical propulsion systems. Several researchers have investigated numerous applications of low-thrust EP including a manned Mars mission, scientific missions to the outer planets, and lunar missions. In contrast, the study of optimal combined high and low-thrust spacecraft trajectories has been limited. In response to the release of NASA's 1994 Announcement of Opportunity (AO) for Discovery class interplanetary exploration missions, a preliminary investigation of a lunar comet rendezvous mission using a solar electric propulsion (SEP) spacecraft was performed. The Discovery mission (eventually named Diana) was envisioned to be a two-phase scientific exploration mission: the first phase involved exploration of the moon and second phase involved rendezvous with a comet. The initial phase began with a chemical propulsion translunar injection and chemical insertion into a lunar orbit, followed by a low-thrust SEP transfer to a circular, polar, low-lunar orbit (LLO). After scientific data was collected at the moon, the SEP spacecraft performed a spiral lunar escape maneuver to begin the interplanetary leg of the mission. After escape from the Earth-moon system, the SEP spacecraft maneuvered in interplanetary space and performed a rendezvous with a short period comet. An initial study that demonstrated the feasibility of using EP for the lunar and comet orbit transfer was performed under the grant NAG3-1581. This final report is a continuation of the initial research efforts in support of the Discovery mission proposal that was submitted to NASA Headquarters in October 1994. Section 2 discusses the lunar orbit transfer phase of the Diana mission which involves both chemical and electric propulsion stages. Section 3 discusses the chemical lunar orbit insertion (LOI) burn optimization. Finally, section 4 presents the conclusions of this research effort.

Kluever, Craig A.↗

Design and development of an F/A-18 inlet distortion rake: A cost and time saving solution

An innovative inlet total pressure distortion measurement rake has been designed and developed for the F/A-18 A/B/C/D aircraft inlet. The design was conceived by NASA and General Electric Aircraft Engines personnel. This rake has been flight qualified and flown in the F/A-18 High Alpha Research Vehicle at NASA Dryden Flight Research Center, Edwards, California. The eight-legged, one-piece, wagon wheel design of the rake was developed at a reduced cost and offered reduced installation time compared to traditional designs. The rake features 40 dual-measurement ports for low- and high-frequency pressure measurements with the high-frequency transducer mounted at the port. This high-frequency transducer offers direct absolute pressure measurements from low to high frequencies of interest, thereby allowing the rake to be used during highly dynamic aircraft maneuvers. Outstanding structural characteristics are inherent to the design through its construction and use of lightweight materials.

Yuhas, Andrew J.↗

Space-Suit-Sizing Device

Report describes device for adjusting length of arm or leg portion of space suit to fit more than one astronaut.

Vykukal, Hubert C.↗