Search NASA⌕ Search

SEARCH · Search NASA

Results for “Learning control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Basic Research Needs Workshop on Quantum Materials for Energy Relevant Technology

Imagine future computers that can perform calculations a million times faster than today’s most powerful supercomputers at only a tiny fraction of the energy cost. Imagine power being generated, stored, and then transported across the national grid with nearly no loss. Imagine ultrasensitive sensors that keep us in the loop on what is happening at home or work, warn us when something is going wrong around us, keep us safe from pathogens, and provide unprecedented control of manufacturing and chemical processes. And imagine smart windows, smart clothes, smart buildings, supersmart personal electronics, and many other items — all made from materials that can change their properties “on demand” to carry out the functions we want. The key to attaining these technological possibilities in the 21st century is a new class of materials largely unknown to the general public at this time but destined to become as familiar as silicon. Welcome to the world of quantum materials — materials in which the extraordinary effects of quantum mechanics give rise to exotic and often incredible properties. To realize the tantalizing potential of quantum materials, there is much basic scientific research to be done. Recognizing the high potential impact of quantum materials, nations around the world are already investing in this effort. We must learn how the astonishing properties of quantum materials can be tailored to address our most pressing technological needs, and we must dramatically improve our ability to synthesize, characterize, and control quantum materials. To accelerate the progress of quantum materials research, the U.S. Department of Energy’s Office of Science, Office of Basic Energy Sciences (BES), sponsored a “Basic Research Needs Workshop on Quantum Materials for Energy-relevant Technology,” which was held near Washington, D.C. on February 8–10, 2016. Attended by more than 100 leading national and international scientific experts in the synthesis, characterization, and theory of quantum materials, the workshop identified four priority research directions (PRDs) that will lay the foundation to better understand quantum materials and harness their rich technological potential.

36 MATERIALS SCIENCE↗

A systematic comparison of machine learning methods for modeling of dynamic processes applied to combustion emission rate modeling

Ten established, data-driven dynamic algorithms are surveyed and a practical guide for understanding these methods generated. Existing Python programming packages for implementing each algorithm are acknowledged, and the model equations necessary for prediction are presented. A case study on a coal-fired power plant’s NO x emission rates is performed, directly comparing each modeling method’s performance on a mutual system. Each model is evaluated by its root mean squared error (RMSE) on out-of-sample future horizon predictions. Optimal hyperparameters are identified using either an exhaustive search or genetic algorithm. The top five model structures of each method are used to recursively predict future NO x emission rates over a 60-step time horizon. The RMSE at each future timestep is determined, and the recursive output prediction trends compared against measurements in time. The GRU neural network is identified as the best candidate for representing the system, demonstrating accurate and stable predictions across the future horizon by all considered models, while satisfactory performance was observed in several of the ARX/NARX formulations. Finally, these efforts have contributed 1) a concise resource of multiple proven dynamic machine learning methods, 2) a practical guide explaining the use of these methods, effectively lowering the “barrier-to-entry” of deploying such models in control systems, 3) a comparison study evaluating each method’s performance on a mutual system, 4) demonstration of accurate multi-timestep emissions modeling suitable for systems-level control, and 5) generalizable results demonstrating the suitability of each method for prediction over a multi-step future horizon to other complex dynamic systems.

42 ENGINEERING↗

Coupling High-Throughput Experiments and Regression Algorithms to Optimize PGM-Free ORR Electrocatalyst Synthesis

Over the past decades, significant improvement has been achieved in the performance of platinum group metal-free (PGM-free) materials as an alternative to Pt-based electrocatalysts for oxygen reduction reaction (ORR). However, further progress in ORR activity requires evaluation of precursors and synthesis approaches. In response to this challenge, we generated a first of its kind experimental data set of 36 samples using high-throughput synthesis and activity measurements. Several control parameters (e.g., Fe precursor identity, the precursor content, and pyrolysis temperature) were varied. We then developed several state-of-the-art machine learning (ML) based regression models to predict ORR activity, dependent on selected synthesis variables. Through an iterative algorithm, higher prediction accuracy (smaller root-mean-square error) was achieved. We identified that gradient boosting regression (GBR) and support vector regression (SVR), among several methods, work best for this data set. Aided by our ML-based surrogate models, we decided to alter catalyst synthesis conditions, which resulted in a 36% increase in measured ORR activity in comparison to the maximum ORR mass activity value of 21.9 A/g catalyst in the original data set. Overall, this combined experiment and machine learning approach represents a promising path forward toward developing highly efficient next-generation ORR electrocatalysts and, more generally, functional materials.

25 ENERGY STORAGE↗

Regional variability in the environmental controls of precipitation regimes in the tropics

The environmental factors that control precipitation regimes in Boreal winter rainfall in the tropics and their regional variabilities are examined using a simple statistical analysis and a machine learning model. Radar-derived precipitation from field campaigns at Darwin Australia, Manaus Brazil, and the Equatorial Indian Ocean, along with the corresponding large-scale environmental variables from ERA5 reanalysis, are used. The dependence of marginal distributions of frequencies of these regimes on five environmental variables are calculated. The variables are hourly column integrated precipitable water (PW), convective available potential energy (CAPE), convective inhibition (CIN), and lower and upper tropospheric wind shear. The simple machine learning model that predicts the probability of transition from suppressed to an active regime as a function of the environmental variables is designed and optimized for a potential application as a trigger function for convection parameterizations. To the first order the analysis shows an abrupt increase in the probability of an active regime near PW > 60 mm and CIN of <100 J kg -1 . The key differences in the frequencies of active regimes among the regions are found to be related to the fact that over Darwin there is strong variability in PW while CIN is generally low. Over Amazon, on the other hand, both PW and CIN are quite variable. Over the DYNAMO domain the comparatively frequent low PW is compensated for by consistently low CIN resulting in a moderate frequency of an active regime.

54 ENVIRONMENTAL SCIENCES↗

Laser aberration signatures in expelled electrons from a tenuous gas

We describe a mechanism by which the aberration content of a focused, multiterawatt laser is imprinted upon the forward angular distribution of electrons ionized within and ponderomotively expelled from the focal volume. In our experiments, the laser aberration type and magnitude are controllably varied, and the measured electron distributions are correspondingly modified in a way consistent with predictions from numerical simulations. This imprint mechanism shows potential for enabling the development of accurate focal-spot characterization of intense lasers when fired at full power and is being developed for extension to petawatt laser systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Adaptive Sequential Monte Carlo for Multiple Changepoint Analysis

Process monitoring and control requires detection of structural changes in a data stream in real time. This paper introduces an efficient sequential Monte Carlo algorithm designed for learning unknown changepoints in continuous time. The method is intuitively simple: new changepoints for the latest window of data are proposed by conditioning only on data observed since the most recent estimated changepoint, as these observations carry most of the information about the current state of the process. The proposed method shows improved performance over the current state of the art. Another advantage of the proposed algorithm is that it can be made adaptive, varying the number of particles according to the apparent local complexity of the target changepoint probability distribution. This saves valuable computing time when changes in the changepoint distribution are negligible, and enables re-balancing of the importance weights of existing particles when a significant change in the target distribution is encountered. The plain and adaptive versions of the method are illustrated using the canonical continuous time changepoint problem of inferring the intensity of an inhomogeneous Poisson process, although the method is generally applicable to any changepoint problem. Performance is demonstrated using both conjugate and non-conjugate Bayesian models for the intensity. Lastly, appendices to the article are available online, illustrating the method on other models and applications.

97 MATHEMATICS AND COMPUTING↗

Physics-constrained, low-dimensional models for magnetohydrodynamics: First-principles and data-driven approaches

Plasmas are highly nonlinear and multiscale, motivating a hierarchy of models to understand and describe their behavior. However, there is a scarcity of plasma models of lower fidelity than magnetohydrodynamics (MHD), although these reduced models hold promise for understanding key physical mechanisms, efficient computation, and real-time optimization and control. Galerkin models, obtained by projection of the MHD equations onto a truncated modal basis, and data-driven models, obtained by modern machine learning and system identification, can furnish this gap in the lower levels of the model hierarchy. This work develops a reduced-order modeling framework for compressible plasmas, leveraging decades of progress in projection-based and data-driven modeling of fluids. We begin by formalizing projection-based model reduction for nonlinear MHD systems. To avoid separate modal decompositions for the magnetic, velocity, and pressure fields, we introduce an energy inner product to synthesize all of the fields into a dimensionally consistent, reduced-order basis. Next, we obtain an analytic model by Galerkin projection of the Hall-MHD equations onto these modes. We illustrate how global conservation laws constrain the model parameters, revealing symmetries that can be enforced in data-driven models, directly connecting these models to the underlying physics. We demonstrate the effectiveness of this approach on data from high-fidelity numerical simulations of a three-dimensional spheromak experiment. Finally, this manuscript builds a bridge to the extensive Galerkin literature in fluid mechanics and facilitates future principled development of projection-based and data-driven models for plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stimulated Emission of Signal Photons from Dark Matter Waves

The manipulation of quantum states of light has resulted in significant advancements in both dark matter searches and gravitational wave detectors. Current dark matter searches operating in the microwave frequency range use nearly quantum-limited amplifiers. Future high frequency searches will use photon counting techniques to evade the standard quantum limit. We present a signal enhancement technique that utilizes a superconducting qubit to prepare a superconducting microwave cavity in a nonclassical Fock state and stimulate the emission of a photon from a dark matter wave. By initializing the cavity in an | n = 4 ⟩ Fock state, we demonstrate a quantum enhancement technique that increases the signal photon rate and hence also the dark matter scan rate each by a factor of 2.78. Using this technique, we conduct a dark photon search in a band around 5.965 GHz ( 24.67 μ eV ), where the kinetic mixing angle ε ≥ 4.35 × 10 − 13 is excluded at the 90% confidence level. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deep Reinforcement Learning in Buildings: Implicit Assumptions and their Impact

As deep reinforcement learning (DRL) continues to gain interest in the smart building research community, there is a transition from simulation-based evaluations to deploying DRL control strategies in actual buildings. While the efficacy of a solution could depend on a particular implementation, there are common obstacles that developers have to overcome to deliver an effective controller. Additionally, a deployment in a physical building can invalidate some of the assumptions made during the controller development. Assumptions on the sensor placement or on the equipment behavior can quickly come undone. This paper presents some of the significant assumptions made during the development of DRL based controllers that could affect their operations in a physical building. Furthermore, a preliminary evaluation revealed that controllers developed with some of these assumptions can incur twice the expected costs when they are deployed in a building.

Prakash, Anand Krishnan↗

Sensor Recommendations for Long Term Monitoring of the F-Area Seepage Basins

In mid-2018, a new paradigm for long-term monitoring was developed after of decade of applied research projects funded by the Department of Energy’s office of Environmental Management Technology Development program. The program at SRNL was focused on transitioning complex environmental waste sites from active to passive remediations strategies. A key result of these studies was that the use of enhanced attenuation approaches at radiologically contaminated sites will result in the creation of secondary source areas in the subsurface that will require monitoring for decades. Alternative monitoring approaches are being developed and tested at the Savannah River Site’s F-Area Hazardous Waste Management Facility, the new paradigm provides innovative solutions that will significantly lower costs of monitoring through the coupling of data collection, machine learning and deterministic groundwater modeling. The foundation of this approach is a well-optimized network of sensors for measuring hydrogeochemical master variables that control, and therefore act as indicators of groundwater contaminant transport. By monitoring changes in the controlling master variables over time arising from geological and environmental shifts, predictive modelling can assist with identifying new strategies for ensuring regulatory requirements are met if trends toward conditions for potential remobilization of attenuated contaminants are detected. In this report, we evaluated commercially available single parameter sensor platforms (e.g., temperature/depth) and configurable multi-parameter sensor platforms (e.g., pH, oxidation-reduction potential, temperature, depth, dissolved oxygen, and conductivity). Each was scored using an optimization function based on how well the system supports the proposed long-term monitoring paradigm, in general, and the site-specific conditions at F-Area, in particular. Several viable sensor systems were identified. Of these, a combined platform including the In-Situ Aqua TROLL 500 multi-parameter sensor platform and the In-Situ temperature/depth sensor had the highest rating and was identified as the most suitable candidate for installation and monitoring of the master variables and potentiometric surface that control groundwater contaminant plumes emanating from the F-Area Seepage Basins. The discussion of recommended potential deployment locations builds upon recommendations made by Denham et al (2019).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of a Traveling-Wave (TW) SRF cavity

Traveling-wave technology can push the accelerator field gradient of niobium SRF cavity to 70MV/m or higher beyond the fundamental limit of 50~60MV/m in Standing-Wave regime. The 1st demonstration of TW resonance excitation in a proof-of-principle 3-cell SRF cavity in 2K liquid helium was successfully carried out at Fermilab in collaboration with Euclid Techlabs. In parallel with that, to advancing TW technologies necessary more for future accelerator-scale one, Fermilab has proposed a preliminary RF design of a half-meter scale TW SRF cavity by considering the physical dimensions of existing SRF facilities and the lessons learned from the 3-cell,. It consists of a 7-cell structure and a power feedback waveguide (WG) loop with new RF configurations to control TW resonance. Development efforts toward a TW 7-cell has been in progress. Here we report the recent activities and progresses of those.

Furuta, F.↗

Mock-Up Waveguide Loop Development toward a Half-Meter Scale Traveling-Wave SRF Cavity

Mock-up waveguide loop development toward a half-meter scale traveling-wave SRF cavity ABSTRACT = Traveling-Wave (TW) technology can push the accelerator field gradient of niobium SRF cavity to 70MV/m or higher beyond the fundamental limit of 50~60MV/m in Standing-Wave regime. The success of TW resonance excitation in a proof-of-principle 3-cell SRF cavity in 2K liquid helium encouraged to advance TW technologies necessary more for future accelerator-scale one. Fermilab has proposed a preliminary RF design of a half-meter scale TW cavity by considering the physical dimensions of existing SRF facilities and the lessons learned from the 3-cell. It consists of a 7-cell structure and a power feedback waveguide (WG) loop with new TW excitation and control schemes such as, double directional coupler and two WG tuners. Mock-up waveguide loop development was launched under Fermilab LDRD program to demonstrate those new RF schemes at a room temperature. Fabrication drawings of a mock-up loop were completed. More details and plans of the development will be presented.

Furuta, Fumio [Fermilab]↗

Potential applications of microbial genomics in nuclear non-proliferation

As nuclear technology evolves in response to increased demand for diversification and decarbonization of the energy sector, new and innovative approaches are needed to effectively identify and deter the proliferation of nuclear arms, while ensuring safe development of global nuclear energy resources. Preventing the use of nuclear material and technology for unsanctioned development of nuclear weapons has been a long-standing challenge for the International Atomic Energy Agency and signatories of the Treaty on the Non-Proliferation of Nuclear Weapons. Environmental swipe sampling has proven to be an effective technique for characterizing clandestine proliferation activities within and around known locations of nuclear facilities and sites. However, limited tools and techniques exist for detecting nuclear proliferation in unknown locations beyond the boundaries of declared nuclear fuel cycle facilities, representing a critical gap in non-proliferation safeguards. Microbiomes, defined as “characteristic communities of microorganisms” found in specific habitats with distinct physical and chemical properties, can provide valuable information about the conditions and activities occurring in the surrounding environment. Microorganisms are known to inhabit radionuclide-contaminated sites, spent nuclear fuel storage pools, and cooling systems of water-cooled nuclear reactors, where they can cause radionuclide migration and corrosion of critical structures. Microbial transformation of radionuclides is a well-established process that has been documented in numerous field and laboratory studies. These studies helped to identify key bacterial taxa and microbially-mediated processes that directly and indirectly control the transformation, mobility, and fate of radionuclides in the environment. Expanding on this work, other studies have used microbial genomics integrated with machine learning models to successfully monitor and predict the occurrence of heavy metals, radionuclides, and other process wastes in the environment, indicating the potential role of nuclear activities in shaping microbial community structure and function. Results of this previous body of work suggest fundamental geochemical-microbial interactions occurring at nuclear fuel cycle facilities could give rise to microbiomes that are characteristic of nuclear activities. These microbiomes could provide valuable information for monitoring nuclear fuel cycle facilities, planning environmental sampling campaigns, and developing biosensor technology for the detection of undisclosed fuel cycle activities and proliferation concerns.

59 BASIC BIOLOGICAL SCIENCES↗

Advanced Electron Microscopy of Nanophased Synthetic Polymers and Soft Complexes for Energy and Medicine Applications

After decades of developments, electron microscopy has become a powerful and irreplaceable tool in understanding the ionic, electrical, mechanical, chemical, and other functional performances of next-generation polymers and soft complexes. The recent progress in electron microscopy of nanostructured polymers and soft assemblies is important for applications in many different fields, including, but not limited to, mesoporous and nanoporous materials, absorbents, membranes, solid electrolytes, battery electrodes, ion- and electron-transporting materials, organic semiconductors, soft robotics, optoelectronic devices, biomass, soft magnetic materials, and pharmaceutical drug design. For synthetic polymers and soft complexes, there are four main characteristics that differentiate them from their inorganic or biomacromolecular counterparts in electron microscopy studies: (1) lower contrast, (2) abundance of light elements, (3) polydispersity or nanomorphological variations, and (4) large changes induced by electron beams. Since 2011, the Center for Nanophase Materials Sciences (CNMS) at Oak Ridge National Laboratory has been working with numerous facility users on nanostructured polymer composites, block copolymers, polymer brushes, conjugated molecules, organic–inorganic hybrid nanomaterials, organic–inorganic interfaces, organic crystals, and other soft complexes. This review crystalizes some of the essential challenges, successes, failures, and techniques during the process in the past ten years. It also presents some outlooks and future expectations on the basis of these works at the intersection of electron microscopy, soft matter, and artificial intelligence. Machine learning is expected to automate and facilitate image processing and information extraction of polymer and soft hybrid nanostructures in aspects such as dose-controlled imaging and structure analysis.

36 MATERIALS SCIENCE↗

High-precision Galaxy Clustering Predictions from Small-volume Hydrodynamical Simulations via Control Variates

Abstract Cosmological simulations of galaxy formation are an invaluable tool for understanding galaxy formation and its impact on cosmological parameter inference from large-scale structures. However, their high computational cost is a significant obstacle for running simulations that probe cosmological volumes comparable to those analyzed by contemporary large-scale structure experiments. In this work, we explore the possibility of obtaining high-precision galaxy clustering predictions from small-volume hydrodynamical simulations such as MillenniumTNG and FLAMINGO via control variates. In this approach, the hydrodynamical full-physics simulation is paired with a matched low-resolution gravity-only simulation. By learning the galaxy–halo connection from the hydrodynamical simulation and applying it to the gravity-only counterpart, one obtains a galaxy population that closely mimics the one in the more expensive simulation. One can then construct an estimator of galaxy clustering that combines the clustering amplitudes in the small-volume hydrodynamical and gravity-only simulations with clustering amplitudes in a large-volume gravity-only simulation. Depending on the galaxy sample, clustering statistic, and scale, this galaxy clustering estimator can have an effective volume of up to around 100 times the volume of the original hydrodynamical simulation in the nonlinear regime. With this approach, we can construct galaxy clustering predictions from existing simulations that are precise enough for mock analyses of next-generation large-scale structure surveys such as the Dark Energy Spectroscopic Instrument and the Legacy Survey of Space and Time.

Doytcheva, Alexandra (ORCID:0009000111254888)↗

Engaging Tenants in Reducing Plug Load Energy Use

Plug and Process Loads (PPLs) account for an increasingly large percentage of commercial building energy use in the U.S. due to the rising number of energy intensive plug-in devices. In addition, buildings are becoming more and more efficient and plug load energy use has become an increasingly pertinent component to achieving aggressive energy targets and netzero energy status. For multi-tenant buildings, controlling plug loads in tenant spaces can be a significant challenge. Luckily, there are a number of PPL reduction strategies, best practices, and lessons learned from numerous commercial real estate and higher education leaders who have successfully engaged building occupants and tenants in reducing PPL energy use. This paper provides actionable PPL reduction strategies and best practices that building owners and managers can immediately apply to their own buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Optimizing Ventilation Using Low-Cost Sensors to Improve Health, Safety, and Energy Efficiency

Air is the primary carrier of hazards within a space, whether it be hazardous byproducts of laboratory research activities or airborne pathogens. As a result, building ventilation is a primary defense against unseen airborne hazards. Critical laboratory facilities require effective mitigation of exposure to research-related, airborne hazards, providing a proving ground for effective ventilation strategies that optimize safety of occupants and reduce energy use. The heart of smart laboratory building operation is dynamic, analytics-based ventilation, which requires an in-depth intimate knowledge of building environmental conditions achieved through contaminant-detection systems. Unfortunately, currently many contaminant-detection solutions are expensive, elaborate systems that raise barriers for building managers. Through the successful deployment of a novel low-cost, modular sensor technology, we have developed a demand-control ventilation protocol effective in improving safety and reducing energy in critical laboratory environments. In this article, we will highlight best practices and lessons learned through this deployment that can be applied beyond laboratories. This article describes a low-cost sensor to support providing a safe, healthy building environment and reduce energy use through effective and efficient ventilation.

dynamic management of indoor air quality↗

Installation and Initial Operation of an On-line Target Imaging System for SNS

After several years of operation, the SNS now enters an era of megawatt class operation. At this intensity level, the target will be operating closer to its engineering limits and the beam profile on target must be carefully controlled. During commissioning and early operations, a temporary imaging system was used to measure the proton density on target. This system was not designed to survive the increasing power levels and it had to be removed in the second half of 2006. Since then, no direct measurement of beam properties at the target has been available. A collaboration was forged to remedy this situation, and has resulted in a new imaging system consisting of three major components: a thermal-sprayed luminescent coating deposited on the target nose, a radiation-tolerant optical system installed upstream of the target, and an image acquisition system integrated with the accelerator controls network. The design, installation, and integration of these components will be described. Initial beam measurements and image analysis results will be presented. Lessons learned during this initial operating experience have been documented and will guide the collaboration s future plans.

43 PARTICLE ACCELERATORS↗