Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

On the dynamics of the reentrant spin-glass state of the Fe{sub 100−x}Zr{sub x} (x = 9, 10) amorphous alloys

Low temperature magnetization (M) and ac susceptibility (χ{sub ac}) data were used to investigate the reentrant spin-glass state in lengths of melt-spun ribbons of Fe{sub 100−x}Zr{sub x} (x = 9, 10) amorphous alloys. The temperature range investigated was from 2 to 300 K, while the applied magnetic field H was varied in the range of ±85 kOe. The magnetic properties were found to be strongly influenced by the sample composition despite the fact that the amount of Fe varies by 1 at. %. For instance, the Curie temperature (T{sub C}) is reduced from 232.5 K to 213.0 K with decreasing Fe concentration, while M for the lower Fe concentration, measured at the highest applied magnetic field (H = 85 kOe) was nearly double the value for that of the higher; the coercivity in the ferromagnetic regime is reduced by a factor close to five when x is increased from 9 at. % to 10 at. %. The ac susceptibility measured for frequencies f in the range of 10–10{sup 4 }Hz showed a sharp drop in the magnitude of the in-phase contribution (χ{sub ac}{sup ′}) and a peak at the out-of-phase component (χ{sub ac}{sup ″}), which shifts to higher temperatures with increasing values of f. The Voguel-Fulcher law applied to the χ{sub ac}{sup ″} data yielded an activation energy E{sub a}/k{sub B} = 21.3 K (40.1 K), the glassy temperature T{sub G} = 15.5 K (38.2 K), and a relaxation time τ{sub 0}=9.1×10{sup −7} s (8.3×10{sup −7} s), for the sample with x = 10 (x = 9). A plot of χ{sub ac}{sup ″}vsχ{sub ac}{sup ′} for a broad range of T and f yielded a broad maximum near the glassy temperature T{sub G} for both sample concentrations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Room temperature long range ferromagnetic ordering in Ni{sub 0.58}Zn{sub 0.42}Co{sub 0.10}Cu{sub 0.10}Fe{sub 1.8}O{sub 4} nano magnetic system

The structural and magnetic behavior of sol-gel autocombustion synthesized nanocrystalline Ni{sub 0.58}Zn{sub 0.42}Co{sub 0.10}Cu{sub 0.10}Fe{sub 1.8}O{sub 4} have been investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mössbauer spectroscopy and vibrating sample magnetometer(VSM). Sample of high purity and high homogeneity was obtained by calcination at low temperature (500°C) resulting in nanoparticles of average diameter ∼15nm as determined by XRD and further confirmed by TEM. X-ray diffraction (XRD) and selective area diffraction (SAED) confirmed the single phase of the sample. Mössbauer results are supported by magnetization data. Well defined sextets and appearance of hysteresis at room temperature indicate the existence of ferromagnetic coupling at room temperature finding material utility in magnetic storage data. The existence of iron in ferric state confirmed by isomer shift is a clear evidence of improved magnetic properties of the present system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Numerically exploring the 1D-2D dimensional crossover on spin dynamics in the doped Hubbard model

Using determinant quantum Monte Carlo (DQMC) simulations, we systematically study the doping dependence of the crossover from one to two dimensions and its impact on the magnetic properties of the Hubbard model. A square lattice of chains is used, in which the dimensionality can be tuned by varying the interchain coupling t ⊥ . The dynamical spin structure factor and static quantities, such as the static spin susceptibility and nearest-neighbor spin correlation function, are characterized in the one- and two-dimensional limits as a benchmark. When the dimensionality is tuned between these limits, the magnetic properties, while evolving smoothly from one to two dimensions, drastically change regardless of the doping level. This suggests that the spin excitations in the two-dimensional Hubbard model, even in the heavily doped case, cannot be explained using the spinon picture known from one dimension. In conclusion, the DQMC calculations are complemented by cluster perturbation theory studies to form a more complete picture of how the crossover occurs as a function of doping and how doped holes impact magnetic order.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The Effect of Oxygen Adsorption for Vacancy-Induced d{sup 0} Magnetism in HfO{sub 2} (110) Surface

Based on the density functional theory, we investigated the electronic structures and magnetic properties of the oxygen adsorption on the defective cubic HfO{sub 2} (110) surface. The adsorption capacities of the perfect and defective surfaces follow in the sequence as: oxygen-deficient model >perfect surface >hafnium-deficient model. When the oxygen molecules adsorb on the nonmagnetic perfect HfO{sub 2} surface, the system has a local magnetic moment and the antiferromagnetic coupling is more stable. For the defective cubic HfO{sub 2} (110) surface, it is found that the oxygen vacancy is more easy to form than the hafnium vacancy by comparing the vacancy formation energy. And the hafnium vacancy could induce a large magnetic moment while the oxygen vacancy alone could not. After adsorption of the oxygen molecule, the nonmagnetic oxygen-deficient HfO{sub 2} model is transformed into the magnetic surface. On the contrary, the introduction of adsorbed oxygen molecule causes the magnetic moment of hafnium-deficient HfO{sub 2} surface to reduce. Additionally, if the oxygen molecules adsorb on the defective HfO{sub 2} (110) surface, the ferromagnetic coupling is energetically favorable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

High-Temperature Ferrofluids Based on Molten Salts

Molten metal chloride salts are promising candidates for advanced heat transfer fluids in generation IV nuclear reactors and beyond. However, research on the magnetic properties of suspended metallic nanoparticles at elevated temperatures is scarce, and there have been no attempts to develop a high-temperature, molten salt based ferrofluid. Such a ferrofluid would enable in situ manipulation of both the physical and thermal properties of the fluid via an external magnetic field. This study examines molten salt based ferrofluids comprised of metallic cobalt nanoparticles dispersed in molten metal chloride salts. High-temperature magnetometry and magneto-thermogalvometric measurements were conducted to evaluate the magnetic characteristics of the ferrofluid. Further analysis was conducted through a combination of microscopy, spectroscopy, solubility tests, and diffraction measurements. Furthermore, the metallic cobalt nanoparticles exhibited a notable degree of chemical stability and sustained magnetism from 25 to 800 °C when suspended in NaCl–MgCl 2 and KCl–ZnCl 2 mixtures.

Cobalt↗
DOE OSTI2018

Electrical control of 2D magnetism in bilayer CrI 3

Controlling magnetism via electric fields addresses fundamental questions of magnetic phenomena and phase transitions, and enables the development of electrically coupled spintronic devices, such as voltage-controlled magnetic memories with low operation energy. Previous studies on dilute magnetic semiconductors such as (Ga,Mn)As and (In,Mn)Sb have demonstrated large modulations of the Curie temperatures and coercive fields by altering the magnetic anisotropy and exchange interaction. Owing to their unique magnetic properties, the recently reported two-dimensional magnets provide a new system for studying these features. For instance, a bilayer of chromium triiodide (CrI 3 ) behaves as a layered antiferromagnet with a magnetic field-driven metamagnetic transition. Here, we demonstrate electrostatic gate control of magnetism in CrI 3 bilayers, probed by magneto-optical Kerr effect (MOKE) microscopy. At fixed magnetic fields near the metamagnetic transition, we realize voltage-controlled switching between antiferromagnetic and ferromagnetic states. At zero magnetic field, we demonstrate a time-reversal pair of layered antiferromagnetic states that exhibit spin-layer locking, leading to a linear dependence of their MOKE signals on gate voltage with opposite slopes. Here, our results allow for the exploration of new magnetoelectric phenomena and van der Waals spintronics based on 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Above room-temperature ferromagnetism of Mn delta-doped GaN nanorods

One-dimensional nitride based diluted magnetic semiconductors were grown by plasma-assisted molecular beam epitaxy. Delta-doping technique was adopted to dope GaN nanorods with Mn. The structural and magnetic properties were investigated. The GaMnN nanorods with a single crystalline structure and with Ga sites substituted by Mn atoms were verified by high-resolution x-ray diffraction and Raman scattering, respectively. Secondary phases were not observed by high-resolution x-ray diffraction and high-resolution transmission electron microscopy. In addition, the magnetic hysteresis curves show that the Mn delta-doped GaN nanorods are ferromagnetic above room temperature. The magnetization with magnetic field perpendicular to GaN c-axis saturates easier than the one with field parallel to GaN c-axis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Electronic structures and magnetic stabilities of 2D Mn-doped GaAs nanosheets: The role of long-range exchange interactions and doping strategies

We investigate the structural, electronic and magnetic properties of Mn atoms doped two-dimensional (2D) hexagonal GaAs nanosheets (GaAsNSs) using both first-principle calculations and Monte Carlo simulations. The first-principle molecular dynamics is first used to test the structural stability of Mn-doped GaAsNS ((Ga,Mn)AsNS). The analysis of spin-resolved electronic structures and determination of magnetic exchange interactions based on density functional theory (DFT) calculations reveals the existence of long-range exchange interaction in the system. Finally, Metropolis Monte Carlo simulation is employed to estimate Curie temperatures (T{sub C}s) of (Ga,Mn)AsNSs with different doping concentrations by different doping strategies. The results indicate that a T{sub C} up to 82 K can be obtained in regularly-doped (Ga,Mn)AsNSs and doping strategies have prominent impact on T{sub C}s of the systems, which emphasizes the importance of both long-range interactions and doping strategies in reduced dimensional diluted magnetic semiconductors (DMSs)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Y-doped La{sub 0.7}Ca{sub 0.3}MnO{sub 3} manganites exhibiting a large magnetocaloric effect and the crossover of first-order and second-order phase transitions

We prepared orthorhombic La{sub 0.7−x}Y{sub x}Ca{sub 0.3}MnO{sub 3} samples (x = 0, 0.04, 0.06, and 0.08) by conventional solid-state reaction and then studied their magnetic properties and magnetocaloric (MC) effect based on magnetization versus temperature and magnetic-field measurements, M(T, H). The experimental results revealed that an x increase in La{sub 0.7−x}Y{sub x}Ca{sub 0.3}MnO{sub 3} reduced the ferromagnetic-paramagnetic transition temperature (T{sub C}) from 260 K (for x = 0) to ∼126 K (for x = 0.08). Around the T{sub C}, maximum magnetic-entropy changes for a magnetic-field variation interval H = 50 kOe are about 10.7, 8.5, 7.4, and 5.8 J·kg{sup −1}·K{sup −1} for x = 0, 0.04, 0.06, and 0.08, respectively, corresponding to refrigerant capacities RC = 250–280 J·kg{sup −1}. These values are comparable to those of some conventional MC materials, revealing the applicability of La{sub 0.7−x}Y{sub x}Ca{sub 0.3}MnO{sub 3} in magnetic refrigeration. Using the Arrott method and scaling hypothesis as analyzing high-field M(H, T) data, and the universal-curve construction of the magnetic entropy change, we found a magnetic-phase separation. While the samples x = 0−0.06 exhibit a first-order magnetic phase transition, x = 0.08 exhibits the crossover of the first-to-second-order phase transformation (with its critical-exponent values close to those expected for the tricritical mean-field theory) and has the presence of ferromagnetic clusters even above the T{sub C}. Such the variations in the magnetism and MC effect are related to the changes in structural parameters caused by the Y substitution for La because Y doping does not change the concentration ratio of Mn{sup 3+}/Mn{sup 4+}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions

In order to study the effect of Fe cation substitution on the local structure, defect formation, and hyperfine interactions in ZnO, Mössbauer spectroscopy measurements of the microwave processed Zn 1 - x Fe x O (x = 0.05, 0.10, 0.15, and 0.20) nanoparticles, together with ab initio calculations, were performed. Complementary information on the distribution of particle size and morphology, as well as magnetic properties, were obtained by X-ray diffraction, transmission electron microscopy, and squid-magnetometry. The selected model for analyzing the Mössbauer spectra of our samples is a distribution of quadrupole splittings. The fitting model with two Lorentz doublets was rejected due to its failure to include larger doublets. The Fe 3 + ions do not yield magnetic ordering in the samples at room temperature. The results from first-principles calculations confirm that the major component of the Mössbauer spectra corresponds to the Fe-alloyed ZnO with Zn vacancy in the next nearest neighbor environment. The magnetic measurements are consistent with the description of the distribution of iron ions over the randomly formed clusters in the ZnO host lattice. While at room temperature all the samples are paramagnetic, magnetic interactions cause a transition into a cluster spin-glass state at low temperatures. © 2019 Author(s).

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

Templated fabrication and characterization of SiO{sub 2} nanotube covered Fe nanowires

In this study, Fe nanowires coated with SiO{sub 2} nanotubes have been synthesized by electrodeposition method using anodic alumina oxide template. Before growing Fe nanowires, 6–8 nm thick SiO{sub 2} nanotubes are grown inside the template using a “surface sol-gel” technique. The nanotube structures were characterized by field emission scanning electron microscopy and energy dispersive x-ray spectroscopy. Magnetic properties of the SiO{sub 2} insulated Fe nanowires inside the membrane are characterized by superconducting quantum interference device. Coercivities of around 120 Oe with field parallel to the nanowire axis and 240 Oe with field perpendicular the nanowire axis are observed at room temperature. These values are comparable to Fe nanowires without insulating layer in membrane. The magnetic hysteresis loop suggests that the SiO{sub 2} insulated nanowires have uniaxial magnetic anisotropy with the easy axis magnetization direction along the nanowire arrays due to their large shape anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Electromagnetic Wave-Absorbing Properties of Steel Slag

This research explores the electromagnetic radiation protection function of steel slag for use as a building material. Scanning electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy and Mössbauer spectroscopy were used to analyze the chemical composition and mineralogical phase of steel slag powder. Electromagnetic parameters of the samples were analyzed and discussed in detail for the frequency range of 1-18 GHz. We found that steel slag had the electromagnetic wave-absorbing property due to electric components (such as FeO and carbon powder) and magnetic components [such as magnetite (Fe{sub 3}O{sub 4}) and hematite (α-Fe{sub 2}O{sub 3})]; electric loss was far greater than magnetic loss. With the increasing milling time, the electric and magnetic properties were increased. The calculated reflectivity curve of steel slag powder epoxide resin–matrix composite at a thickness of 10 mm had several interference peaks, and the absorbing properties increased gradually with increasing frequency. Moreover, the minimum reflectivity was − 21 dB (Decibel) at 13 GHz (Gigahertz). The steel slag powder cement-based composite showed electromagnetic wave-absorbing properties at 10-18 GHz, and the greatest absorption of the 25 mm sample reached 11.5 dB; therefore, the steel slag shows promise as a building material for electromagnetic protection.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Mo-Terminated Edge Reconstructions in Nanoporous Molybdenum Disulfide Film

The catalytic and magnetic properties of molybdenum disulfide (MoS 2 ) are significantly enhanced by the presence of edge sites. One method to obtain a high density of edge sites in a two-dimensional (2D) film is by introducing porosity. Yet, the large-scale bottom-up synthesis of a porous 2D MoS 2 film remains challenging and the correlation of growth conditions to the atomic structures of the edges is not well understood. In this work, using molecular beam epitaxy, we prepare wafer-scale nanoporous MoS 2 films under conditions of high Mo flux and study their catalytic and magnetic properties. Atomic-resolution electron microscopy imaging of the pores reveals two new types of reconstructed Mo-terminated edges, namely, a distorted 1T (DT) edge and the Mo-Klein edge. Nanoporous MoS 2 films are magnetic up to 400 K, which is attributed to the presence of Mo-terminated edges with unpaired electrons, as confirmed by density functional theory calculation. The small hydrogen adsorption free energy at these Mo-terminated edges leads to excellent activity for the hydrogen evolution reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Dielectric and magnetic investigations of GaFeO{sub 3} single crystals

Structural, dielectric and magnetic properties have been investigated for the polar ferrimagnet, GaFeO{sub 3} single crystals grown by optical floating zone technique. Phase formation was confirmed from X-ray diffraction. Hopping conduction mechanism of Fe{sup 2+} ions and oxygen vacancies contribute to the electric polarization and dielectric constant of the material. Disorderness in the cation site gives rise to the magnetic ordering and the splitting in the zero field cooled (ZFC) and field cooled (FC) magnetization curves reveals the movement of the domain walls.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Electronic and Magnetic Investigations on Fe{sub 2}NiTe Alloy with High Curie Temperature

Full-potential local-orbital minimum-basis and spin-polarized relativistic Korringa-Kohn-Rostoker along with Monte Carlo simulations are applied to study the electronic and magnetic properties of Fe{sub 2}NiTe with Hg{sub 2}CuTi structure. The analysis of orbital population shows the electrons of 4s, 3d, 4d, and 4p from transition metal and 5s, 5d, and 5p from Te atom participating in bonding. It is demonstrated by the density of states of d-d and p-d hybridizations. Calculations show the magnetic moment is carried mainly by Fe atoms. Accordingly, the exchanges of Fe constituents play a leading role in interactions. By using the calculated Heisenberg exchange coupling parameters, the Curie temperature is estimated to be 761.38 K within mean-field approximation. In order to obtain more accurate value of the Curie temperature, Monte Carlo method is adopted to model the normalized magnetization as functions of the temperature, the obtained 507.93 K value is noticeably higher than the room temperature, which is favorable in realistic spintronics application. Finally, the magnetic moments, exchange interactions, and Curie temperatures in the range of 5.4 to 6.5 Å are calculated; the results implies the Curie temperatures are still above room temperature between given lattice intervals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

First-principles Study of Strain-Induced Magnetism in Defective Arsenene

By using first-principles calculations, we explore the influences of tensile strain on the magnetic properties of a defective arsenene monolayer with mono-vacancy and di-vacancy. Calculation results show that unstrained defective arsenene monolayers both are intrinsically nonmagnetic. However, appropriate tensile strains can induce a ferromagnetic coupling in mono-vacancy- (8%) and di-vacancy-doped systems (7%), respectively. In addition, we also discussed the physical mechanism of strain-induced magnetism emergence and predicted a possibility of magnetism appearance in the experiment. Our study may provide insight for the design of memory-switching spintronic devices with metal-free magnetism by using arsenene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Causes of the Metamagnetism in a Disordered EuMn{sub 0.5}Co{sub 0.5}O{sub 3} Perovskite

The magnetic properties of the EuMn{sub 0.5}Co{sub 0.5}O{sub 3} perovskite synthesized under various conditions are studied in fields up to 140 kOe. The sample synthesized at T = 1500°C is shown to exhibit a metamagnetic phase transition, which is irreversible below T = 40 K, and the sample synthesized at T = 1200°C demonstrates the field dependence of magnetization that is typical of a ferromagnet. Both samples have T{sub C} = 123 K and approximately the same magnetization in high magnetic fields. The metamagnetism is assumed to be related to a transition from a noncollinear ferromagnetic phase to a collinear phase, and the presence of clusters with ordered Co{sup 2+} and Mn{sup 4+} ions leads to ferromagnetism. The noncollinear phase is formed due to the competition between positive Co{sup 2+}–Mn{sup 4+} and negative Mn{sup 4+}–Mn{sup 4+} and Co{sup 2+}–Co{sup 2+} interactions, which make almost the same contributions, and to the existence of a high magnetic anisotropy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗