Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

OC5 Project Phase II: Validation of Global Loads of the DeepCwind Floating Semisubmersible Wind Turbine

This paper summarizes the findings from Phase II of the Offshore Code Comparison, Collaboration, Continued, with Correlation project. The project is run under the International Energy Agency Wind Research Task 30, and is focused on validating the tools used for modeling offshore wind systems through the comparison of simulated responses of select system designs to physical test data. Validation activities such as these lead to improvement of offshore wind modeling tools, which will enable the development of more innovative and cost-effective offshore wind designs. For Phase II of the project, numerical models of the DeepCwind floating semisubmersible wind system were validated using measurement data from a 1/50th-scale validation campaign performed at the Maritime Research Institute Netherlands offshore wave basin. Validation of the models was performed by comparing the calculated ultimate and fatigue loads for eight different wave-only and combined wind/wave test cases against the measured data, after calibration was performed using free-decay, wind-only, and wave-only tests. The results show a decent estimation of both the ultimate and fatigue loads for the simulated results, but with a fairly consistent underestimation in the tower and upwind mooring line loads that can be attributed to an underestimation of wave-excitation forces outside the linear wave-excitation region, and the presence of broadband frequency excitation in the experimental measurements from wind. Participant results showed varied agreement with the experimental measurements based on the modeling approach used. Modeling attributes that enabled better agreement included: the use of a dynamic mooring model; wave stretching, or some other hydrodynamic modeling approach that excites frequencies outside the linear wave region; nonlinear wave kinematics models; and unsteady aerodynamics models. Also, it was observed that a Morison-only hydrodynamic modeling approach could create excessive pitch excitation and resulting tower loads in some frequency bands.

17 WIND ENERGY↗

Removing Numerical Pathologies in a Turbulence Parameterization Through Convergence Testing

Abstract Discretized numerical models of the atmosphere are usually intended to faithfully represent an underlying set of continuous equations, but this necessary condition is violated sometimes by subtle pathologies that have crept into the discretized equations. Such pathologies can introduce undesirable artifacts, such as sawtooth noise, into the model solutions. The presence of these pathologies can be detected by numerical convergence testing. This study employs convergence testing to verify the discretization of the Cloud Layers Unified By Binormals (CLUBB) model of clouds and turbulence. That convergence testing identifies two aspects of CLUBB's equation set that contribute to undesirable noise in the solutions. First, numerical limiters (i.e., clipping) used by CLUBB introduce discontinuities or slope discontinuities in model fields. Second, nonlinear artificial diffusion employed for improving numerical stability can introduce unintended small‐scale features into the solution of the model equations. Smoothing the limiters and using linear artificial diffusion reduces the noise and restores the expected first‐order convergence in CLUBB's solutions. These model reformulations enhance our confidence in the trustworthiness of solutions from CLUBB by eliminating the unphysical oscillations in high‐resolution simulations. The improvements in the results at coarser, near‐operational grid spacing and timestep are also seen in cumulus cloud and dry turbulence tests. In addition, convergence testing is proven to be a valuable tool for detecting pathologies, including unintended discontinuities and grid dependence, in the model equation set.

58 GEOSCIENCES↗

Thermal Property Estimation of Fibrous Insulation: Heat Transfer Modeling and the Continuous Genetic Algorithm

Thermal properties of high-temperature fibrous insulation materials were estimated from transient thermal tests using an inverse heat transfer technique. Transient temperature data from an experimental set up was collected and a simple, one-dimensional numerical model was constructed to replicate the temperatures within the test assembly. The Continuous Genetic Algorithm optimization technique in conjunction with a numerical thermal model and transient test data was used to estimate coefficients of a functional representation of the thermal property. The thermal properties, i.e., thermal conductivity and specific heat, of an alumina insulation felt were estimated over the temperature range of 300 K to 1700 K at various constant static pressures in nitrogen gas and compared with published data. The resulting thermal property estimates were within 10% of published values over the entire temperature range at various pressures. The methodology, application, and results are presented.

Frye, Elora↗

Distribution Locational Real-Time Pricing Based Smart Building Control and Management

This paper proposes an real-virtual parallel computing scheme for smart building operations aiming at augmenting overall social welfare. The University of Denver's campus power grid and Ritchie fitness center is used for demonstrating the proposed approach. An artificial virtual system is built in parallel to the real physical system to evaluate the overall social cost of the building operation based on the social science based working productivity model, numerical experiment based building energy consumption model and the power system based real-time pricing mechanism. Through interactive feedback exchanged between the real and virtual system, enlarged social welfare, including monetary cost reduction and energy saving, as well as working productivity improvements, can be achieved.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A detailed model for simulation of catchment scale subsurface hydrologic processes

A catchment scale numerical model is developed based on the three-dimensional transient Richards equation describing fluid flow in variably saturated porous media. The model is designed to take advantage of digital elevation data bases and of information extracted from these data bases by topographic analysis. The practical application of the model is demonstrated in simulations of a small subcatchment of the Konza Prairie reserve near Manhattan, Kansas. In a preliminary investigation of computational issues related to model resolution, we obtain satisfactory numerical results using large aspect ratios, suggesting that horizontal grid dimensions may not be unreasonably constrained by the typically much smaller vertical length scale of a catchment and by vertical discretization requirements. Additional tests are needed to examine the effects of numerical constraints and parameter heterogeneity in determining acceptable grid aspect ratios. In other simulations we attempt to match the observed streamflow response of the catchment, and we point out the small contribution of the streamflow component to the overall water balance of the catchment.

Paniconi, Claudio↗

Modeling and Evaluation of Geophysical Methods for Monitoring and Tracking CO2 Migration

Geological sequestration has been proposed as a viable option for mitigating the vast amount of CO 2 being released into the atmosphere daily. Test sites for CO 2 injection have been appearing across the world to ascertain the feasibility of capturing and sequestering carbon dioxide. A major concern with full scale implementation is monitoring and verifying the permanence of injected CO 2 . Geophysical methods, an exploration industry standard, are non-invasive imaging techniques that can be implemented to address that concern. Geophysical methods, seismic and electromagnetic, play a crucial role in monitoring the subsurface pre- and post-injection. Seismic techniques have been the most popular but electromagnetic methods are gaining interest. The primary goal of this project was to develop a new geophysical tool, a software program called GphyzCO2, to investigate the implementation of geophysical monitoring for detecting injected CO 2 at test sites. The GphyzCO2 software consists of interconnected programs that encompass well logging, seismic, and electromagnetic methods. The software enables users to design and execute 3D surface-to-surface (conventional surface seismic) and borehole-to-borehole (cross-hole seismic and electromagnetic methods) numerical modeling surveys. The generalized flow of the program begins with building a complex 3D subsurface geological model, assigning properties to the models that mimic a potential CO 2 injection site, numerically forward model a geophysical survey, and analyze the results. A test site located in Warren County, Ohio was selected as the test site for the full implementation of GphyzCO2. Specific interest was placed on a potential reservoir target, the Mount Simon Sandstone, and cap rock, the Eau Claire Formation. Analysis of the test site included well log data, physical property measurements (porosity), core sample resistivity measurements, calculating electrical permittivity values, seismic data collection, and seismic interpretation. The data was input into GphyzCO2 to demonstrate a full implementation of the software capabilities. Part of the implementation investigated the limits of using geophysical methods to monitor CO 2 injection sites. The results show that cross-hole EM numerical surveys are limited to under 100 meter borehole separation. Those results were utilized in executing numerical EM surveys that contain hypothetical CO 2 injections. The outcome of the forward modeling shows that EM methods can detect the presence of CO 2 .

54 ENVIRONMENTAL SCIENCES↗

Modeling the formation of Sedan Crater using the FLAG and HOSS codes

Numerical modeling of explosion crater formation requires accounting for complex physical processes. Numerical validation of explosion cratering is an important step in modeling and requires experimental data for comparison. Models using discrete elements and continuum models have both benefits and drawbacks to their approaches. In this work, we consider both an arbitrary Lagrangian–Eulerian (ALE) hydrocode and a finite discrete element method (FDEM) approach to modeling the formation of the Sedan crater, the largest human-made crater in the United States. The Sedan crater formed from an underground nuclear detonation in the Nevada desert as part of Project Plowshare. Our models show that the continuum approach of the hydrocode matched well compared to early test time prior to the mound rupture and subsequent fireball venting, when most of the alluvium exhibited fluid behavior. Our FDEM approach matched the final crater dimensions well, after material had settled back into the crater, when material strength and solid mechanics play key roles. Our work shows how leveraging the benefits of multiple numerical approaches can lead to better understanding of complex physical problems, especially problems with limited experimental data. By using a continuum approach to early-time hydrodynamics and an FDEM approach to later-time solid mechanics, we can better understand the different physical regimes of explosion crater formation.

36 MATERIALS SCIENCE↗

THREE-DIMENSIONAL SOLAR WIND MODELING FROM THE SUN TO EARTH BY A SIP-CESE MHD MODEL WITH A SIX-COMPONENT GRID

The objective of this paper is to explore the application of a six-component overset grid to solar wind simulation with a three-dimensional (3D) Solar-InterPlanetary Conservation Element/Solution Element MHD model. The essential focus of our numerical model is devoted to dealing with: (1) the singularity and mesh convergence near the poles via the use of the six-component grid system, (2) the {nabla} {center_dot} B constraint error via an easy-to-use cleaning procedure by a fast multigrid Poisson solver, (3) the Courant-Friedrichs-Levy number disparity via the Courant-number insensitive method, (4) the time integration by multiple time stepping, and (5) the time-dependent boundary condition at the subsonic region by limiting the mass flux escaping through the solar surface. In order to produce fast and slow plasma streams of the solar wind, we include the volumetric heating source terms and momentum addition by involving the topological effect of the magnetic field expansion factor f{sub S} and the minimum angular distance {theta}{sub b} (at the photosphere) between an open field foot point and its nearest coronal hole boundary. These considerations can help us easily code the existing program, conveniently carry out the parallel implementation, efficiently shorten the computation time, greatly enhance the accuracy of the numerical solution, and reasonably produce the structured solar wind. The numerical study for the 3D steady-state background solar wind during Carrington rotation 1911 from the Sun to Earth is chosen to show the above-mentioned merits. Our numerical results have demonstrated overall good agreements in the solar corona with the Large Angle and Spectrometric Coronagraph on board the Solar and Heliospheric Observatory satellite and at 1 AU with WIND observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Spectral Element Modeling of Acoustic to Seismic Coupling Over Topography

Acoustic waves in the atmosphere are commonly recorded on seismometers as they couple into the ground. These signals, here called ground coupled airwaves, are not commonly considered in numerical modeling of infrasound propagation, which often assumes a rigid unmeshed boundary. Starting from an analytically-tractable spherical wave model, we analyze how the coupling of an acoustic wave into a planar elastic halfspace changes over a wide range of scenarios. We use energy admittance to quantify acoustic to seismic coupling over both a planar elastic halfspace and meshed topography. Our spectral element and analytic calculations have different maxima as a function of incidence angle, with very high admittance values for near-vertical incidence (maximum ≈78%). Energy admittance calculations at shallow incidence angles are much smaller (less than 1%). In simulations over the complex topography of Sakurajima Volcano, we attribute the variable spatial pattern of energy admittance to changes in earth parameters between each model. The observed pressure difference over the simulated 15 km region appears to be < 2%. While this value is relatively small, the cumulative addition over 100s of km and multiple acoustic bounce points may be significant. Acoustic to seismic coupling along the propagation path may bias long distance yield estimates, particularly when infrasound propagates over regions with steep topography or particularly slow seismic velocities, such as alluvial planes.

58 GEOSCIENCES↗

Modeling of the Kinetics of Carbonitride Precipitation Process in High-Strength Low-Alloy Steels Using Cellular Automata Method

Proposition of a cellular automata (CA) model of carbonitride precipitation to simulate image of microstructure in HSLA steels and to predict the mechanical properties is presented in the paper. CA model proved to be very efficient in modeling various phenomena in material science. Numerical modeling played an important role in development of new processing technologies taking advantage of precipitation. By modeling, we mean a mathematical description of the relation between the main process variables and the resulting material properties, based on sound physical principles. In microalloyed steels, the microalloying elements Ti, Nb and V are added in order to control their microstructure and mechanical properties. High chemical affinity of these elements for interstitials (C, N) results in precipitation of binary compound, nitrides and carbides and products of their mutual solubility—carbonitrides. The model accounts for an increase in dislocation density due to plastic deformation and predicts kinetics of precipitation as well as shape of precipitates.

36 MATERIALS SCIENCE↗

Microbial communities for bioprocessing: lessons learned from nature

Microbial bioprocessing has evolved from the use of undefined natural consortia to the construction of synthetic communities tailored to specific processes and bioproducts. This evolution is enabled by recent advances in biotechnology, including cultivation of non-model microbes, metabolic engineering, bioinformatics, and numerical modeling. Equipped with these powerful tools, engineers have designed co-cultures and consortia with an expanded set of capabilities, mainly via ‘bottom-up’ approaches that tether isolates together in culture. We present a brief review of the opportunities, challenges, and recent developments in consortia-based bioprocessing with a focus on lignocellulosic biomass conversion. With improved understanding of microbial community composition and function, we further present a vision to harness defined consortia down-selected from nature via ‘top down’ approaches.

59 BASIC BIOLOGICAL SCIENCES↗

Practical silicon deposition rules derived from silane monitoring during plasma-enhanced chemical vapor deposition

We clarify the difference between the SiH{sub 4} consumption efficiency η and the SiH{sub 4} depletion fraction D, as measured in the pumping line and the actual reactor of an industrial plasma-enhanced chemical vapor deposition system. In the absence of significant polysilane and powder formation, η is proportional to the film growth rate. Above a certain powder formation threshold, any additional amount of SiH{sub 4} consumed translates into increased powder formation rather than into a faster growing Si film. In order to discuss a zero-dimensional analytical model and a two-dimensional numerical model, we measure η as a function of the radio frequency (RF) power density coupled into the plasma, the total gas flow rate, the input SiH{sub 4} concentration, and the reactor pressure. The adjunction of a small trimethylboron flow rate increases η and reduces the formation of powder, while the adjunction of a small disilane flow rate decreases η and favors the formation of powder. Unlike η, D is a location-dependent quantity. It is related to the SiH{sub 4} concentration in the plasma c{sub p}, and to the phase of the growing Si film, whether the substrate is glass or a c-Si wafer. In order to investigate transient effects due to the RF matching, the precoating of reactor walls, or the introduction of a purifier in the gas line, we measure the gas residence time and acquire time-resolved SiH{sub 4} density measurements throughout the ignition and the termination of a plasma.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MODELING COLLISIONAL CASCADES IN DEBRIS DISKS: STEEP DUST-SIZE DISTRIBUTIONS

We explore the evolution of the mass distribution of dust in collision-dominated debris disks, using the collisional code introduced in our previous paper. We analyze the equilibrium distribution and its dependence on model parameters by evolving over 100 models to 10 Gyr. With our numerical models, we confirm that systems reach collisional equilibrium with a mass distribution that is steeper than the traditional solution by Dohnanyi. Our model yields a quasi-steady-state slope of n(m) {approx} m{sup -1.88} [n(a) {approx} a{sup -3.65}] as a robust solution for a wide range of possible model parameters. We also show that a simple power-law function can be an appropriate approximation for the mass distribution of particles in certain regimes. The steeper solution has observable effects in the submillimeter and millimeter wavelength regimes of the electromagnetic spectrum. We assemble data for nine debris disks that have been observed at these wavelengths and, using a simplified absorption efficiency model, show that the predicted slope of the particle-mass distribution generates spectral energy distributions that are in agreement with the observed ones.

79 ASTRONOMY AND ASTROPHYSICS↗

Spin liquid to spin glass crossover in the random quantum Heisenberg magnet

We study quantum SU($M$) spins with all-to-all and random Heisenberg exchange interactions of root-mean-square strength $J$. The $M \rightarrow \infty$ model has a spin liquid ground state with the spinons obeying the equations of the Sachdev-Ye-Kitaev (SYK) model. Numerical studies of the SU(2) model with $S=1/2$ spins show spin glass order in the ground state, but also display SYK spin liquid behavior in the intermediate frequency spin spectrum. We employ a $1/M$ expansion to describe the crossover from fractionalized fermionic spinons to a confining spin glass state with weak spin glass order $q_{EA}$. The SYK spin liquid behavior persists down to a frequency $\omega_\ast \sim J q_{EA}$, and for $\omega < \omega_\ast$, the spectral density is linear in $\omega$, thus quenching the extensive zero temperature entropy of the spin liquid. Furthermore, the linear $\omega$ spectrum is qualitatively similar to that obtained earlier using bosonic spinons for large $q_{EA}$. We argue that the extensive SYK spin liquid entropy is transformed as $T \rightarrow 0$ to an extensive complexity of the spin glass state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Akuna

Akuna is a user environment that enables geoscientists to create conceptual models for subsurface investigations. These conceptual models can be augmented to create numerical models for specific subsurface simulators, and Akuna enables these simulations to be executed on supercomputers, and the results analyzed and visualized. Akuna is designed to easily support multiple subsurface simulators by using a novel, declarative approach that describes the specific features (input file formats, execution modes, output formats) of a simulator in an external data file, based on this data file, Akuna user interfaces are dynamically generated by Akuna, greatly reducing the effort and cost required to support a new simulator.

Source record↗

Discontinuous Galerkin Dynamical Core in HOMME

Atmospheric numerical modeling has been going through radical changes over the past decade. One major reason for this trend is due to the recent paradigm change in scientific computing , triggered by the arrival of petascale computing resources with core counts in the tens of thousands to hundreds of thousands range. Modern atmospheric modelers must adapt grid systems and numerical algorithms to facilitate an unprecedented levels of scalability on these modern highly parallel computer architectures. The numerical algorithms which can address these challenges should have the local properties such as high on-processor floating-point operation count to bytes moved and minimum parallel communication overhead.

17 WIND ENERGY↗

Physics-Informed AI for Climate and Weather Risk Prediction (Final Report)

As part of the work Terrafuse developed 1) a model for wildfire risk in California, and 2) a model for downscaled wind fields from Numerical Weather Prediction (NWP) numerical models. The wildfire model is based on 20 years of historical data and captures the dependence of wildfire incidence and spread on climatic, weather and land-use variables by training a machine learning model. Nonlinear relationships between input features are learned and expressed by the model and model transparency allows features to be ranked and interpreted. The fire model is of use for accurately predicting real-time daily and long-term wildfire risk for use cases in energy and insurance. The downscaled wind model is a spatio-temporal deep learning model that emulates the influence of high-resolution variables on wind speed, allowing coarse-resolution operational NWP models to be accurately expressed on fine grids at high resolution, with application to wind energy and weather forecasting.

54 ENVIRONMENTAL SCIENCES↗

A technique for measuring vertically and horizontally polarized microwave brightness temperatures using electronic polarization-basis rotation

This technique for electronically rotating the polarization basis of an orthogonal-linear polarization radiometer is based on the measurement of the first three feedhorn Stokes parameters, along with the subsequent transformation of this measured Stokes vector into a rotated coordinate frame. The technique requires an accurate measurement of the cross-correlation between the two orthogonal feedhorn modes, for which an innovative polarized calibration load was developed. The experimental portion of this investigation consisted of a proof of concept demonstration of the technique of electronic polarization basis rotation (EPBR) using a ground based 90-GHz dual orthogonal-linear polarization radiometer. Practical calibration algorithms for ground-, aircraft-, and space-based instruments were identified and tested. The theoretical effort consisted of radiative transfer modeling using the planar-stratified numerical model described in Gasiewski and Staelin (1990).

Gasiewski, Albin J.↗