Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRONG FORCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Reduction of Unsteady Forcing in a Vaned, Contra-Rotating Transonic Turbine Configuration

HPT blade unsteadiness in the presence of a downstream vane consistent with contra-rotation is characterized by strong interaction at the first harmonic of downstream vane passing. E An existing stage-and-one-half transonic turbine rig design was used as a baseline to investigate means of reducing such a blade-vane interaction. E Methods assessed included: Aerodynamic shaping of HPT blades 3D stacking of the downstream vane Steady pressure-side blowing E Of the methods assessed, a combination of vane bowing and steady pressure-side blowing produced the most favorable result. E Transonic turbine experiments are planned to assess predictive accuracy for the baseline turbine and any design improvements.

Clark, John↗

Calculating Hugoniots for molecular crystals from first principles.

Density Functional Theory (DFT) has over the last few years emerged as an indispensable tool for understanding the behavior of matter under extreme conditions. DFT based molecular dynamics simulations (MD) have for example confirmed experimental findings for shocked deuterium, enabled the first experimental evidence for a triple point in carbon above 850 GPa, and amended experimental data for constructing a global equation of state (EOS) for water, carrying implications for planetary physics. The ability to perform high-fidelity calculations is even more important for cases where experiments are impossible to perform, dangerous, and/or prohibitively expensive. For solid explosives, and other molecular crystals, similar success has been severely hampered by an inability of describing the materials at equilibrium. The binding mechanism of molecular crystals (van der Waals forces) is not well described within traditional DFT. Among widely used exchange-correlation functionals, neither LDA nor PBE balances the strong intra-molecular chemical bonding and the weak inter-molecular attraction, resulting in incorrect equilibrium density, negatively affecting the construction of EOS for undetonated high explosives. We are exploring a way of bypassing this problem by using the new Armiento-Mattsson 2005 (AM05) exchange-correlation functional. The AM05 functional is highly accurate for a wide range of solids, in particular in compression. In addition, AM05 does not include any van der Waals attraction, which can be advantageous compared to other functionals: Correcting for a fictitious van der Waals like attraction with unknown origin can be harder than correcting for a complete absence of all types of van der Waals attraction. We will show examples from other materials systems where van der Waals attraction plays a key role, where this scheme has worked well, and discuss preliminary results for molecular crystals and explosives.

36 MATERIALS SCIENCE↗

The diurnal cycle of entrainment and detrainment in LES of the Southern Ocean driven by observed surface fluxes and waves

Empirical rules for both entrainment and detrainment are developed from LES of the Southern Ocean boundary layer when the turbulence, stratification, and shear cannot be assumed to be in equilibrium with diurnal variability in surface flux and wave (Stokes drift) forcing. A major consequence is the failure of downgradient eddy viscosity, which becomes more serious with Stokes drift and is overcome by relating the angle between the stress and shear vectors to the orientations of Lagrangian shear to the surface and of local Eulerian shear over 5 m. Thus, the momentum flux can be parameterized as a stress magnitude and this empirical direction. In addition, the response of a deep boundary layer to sufficiently strong diurnal heating includes boundary layer collapse and the subsequent growth of a morning boundary layer, whose depth is empirically related to the time history of the forcing, as are both morning detrainment and afternoon entrainment into weak diurnal stratification. Below the boundary layer, detrainment rules give the maximum buoyancy flux and its depth, as well a specific stress direction. Another rule relates both afternoon and nighttime entrainment depth and buoyancy flux to surface layer turbulent kinetic energy production integrals. These empirical relationships are combined with rules for boundary layer transport to formulate two parameterizations; one based on eddy diffusivity and viscosity profiles and another on flux profiles of buoyancy and of stress magnitude. Evaluations against LES fluxes show the flux profiles to be more representative of the diurnal cycle, especially with Stokes drift.

54 ENVIRONMENTAL SCIENCES↗

Vertical Jump Height is more Strongly Associated with Velocity and Work Performed Prior to Take-off

Vertical jump (VJ) height is commonly used as a measure of athletic capability in strength and power sports. Although VJ has been shown to be a predictor of athletic performance, it is not clear which kinetic ground reaction force (GRF) variables, such as peak force (PF), peak power (PP), peak velocity (PV), total work (TW) or impulse (Imp) are the best correlates. To determine which kinetic variables (PF, PP, PV, TW, and Imp) best correlate with VJ height. Twenty subjects (14 males, 6 females) performed three maximal countermovement VJs on a force platform (Advanced Mechanical Technology, Inc., Watertown, MA, USA). VJ jump height was calculated as the difference between standing reach and the highest reach point measured using a Vertec. PF, PP, PV, TW, and Imp were calculated using the vertical GRF data sampled at 1000 Hz from the lowest point in the countermovement through the concentric portion until take-off. GRF data were normalized to body mass measured using a standard scale (Detecto, Webb City, MO, USA). Correlation coefficients were computed between each GRF variable and VJ height using a Pearson correlation. VJ height (43.4 plus or minus 9.1 cm) was significantly correlated (p less than 0.001) with PF (998 plus or minus 321 N; r=0.51), PP (1997 plus or minus 772 W; r=0.69), PV (2.66 plus or minus 0.40 m (raised dot) s(sup -1); r=0.85), TW (259 plus or minus 93.0 kJ; r=0.82), and Imp (204 plus or minus 51.1 N(raised dot)s; r=0.67). Although all variables were correlated to VJ height, PV and TW were more strongly correlated to VJ height than PF, PP, and Imp. Therefore, since TW is equal to force times displacement, the relative displacement of the center of mass along with the forces applied during the upward movement of the jump are critical determinants of VJ height. PV and TW are key determinants of VJ height, and therefore successful training programs to increase VJ height should focus on rapid movement (PV) and TW by increasing power over time rather than focusing on PF alone.

Bentley, J. R.↗

Complex Dark Matter

After a century of study, scientists have come to the realization that the ordinary matter made of atoms is a minority in the universe. In order to explain observations, it appears that there exists a new and undiscovered kind of matter, called dark matter, that is five times more prevalent than ordinary matter. The evidence for this new matter’s existence is very strong, but scientists know only a little about its nature. In today’s video, Fermilab’s Dr. Don Lincoln talks about an exciting and unconventional idea, specifically that dark matter might have a very complex set of structures and interactions. While this idea is entirely speculative, it is an interesting hypothesis and one that scientists are investigating.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Dynamics of Debris Disk Creation in Neutron Star Mergers

Abstract The detection of GW170817/AT2017gfo inaugurated an era of multimessenger astrophysics, in which gravitational-wave and multiwavelength photon observations complement one another to provide unique insight into astrophysical systems. A broad theoretical consensus exists, in which the photon phenomenology of neutron star mergers largely rests upon the evolution of the small amount of matter left on bound orbits around the black hole or massive neutron star remaining after the merger. Because this accretion disk is far from inflow equilibrium, its subsequent evolution depends very strongly on its initial state, yet very little is known about how this state is determined. Using both snapshot and tracer particle data from a numerical relativity/MHD simulation of an equal-mass neutron star merger that collapses to a black hole, we show how gravitational forces arising in a nonaxisymmetric, dynamical spacetime supplement hydrodynamical effects in shaping the initial structure of the bound debris disk. The work done by hydrodynamical forces is ∼10 times greater than that due to time-dependent gravity. Although gravitational torques prior to remnant relaxation are an order of magnitude larger than hydrodynamical torques, their intrinsic sign symmetry leads to strong cancellation; as a result, hydrodynamical and gravitational torques have a comparable effect. We also show that the debris disk’s initial specific angular momentum distribution is sharply peaked at roughly the specific angular momentum of the merged neutron star’s outer layers, a fewr g c, and identify the regulating mechanism.

Astronomy & Astrophysics↗

High-Fidelity Simulations of Lift+Cruise VTOL Urban Air Mobility Concept Aircraft in Hover

This paper presents progress of high-fidelity multidisciplinary simulations for the NASA lift+cruise vertical takeoff and landing (VTOL) urban air mobility concept aircraft in hover. The study focuses on the unsteady flow solutions featuring strong wake interactions between rotors and the airframe. The simulations couple a high-fidelity aerodynamic model with a comprehensive rotorcraft aeromechanics tool with rotor rotation-speed trim. The aerodynamic model is based on the Reynolds-averaged Navier-Stokes equations using the one-equation Spalart-Allmaras turbulence model with rotation correction. Unsteady aerodynamic flows are computed on a dynamic, deformable, unstructured, overset grid system. An integrated overset-grid assembler is used to construct the composite grid from 23 component grids and facilitate communications between individual component grids. Rotor performance and airframe forces and moments are computed and compared on two unstructured grids. The study demonstrates capabilities of high-fidelity multidisciplinary analysis tools to capture the strong unsteady flowfield around this multi-rotor aircraft in hover.

CFD↗

High-Fidelity Simulations of Lift+Cruise VTOL Urban Air Mobility Concept Aircraft in Hover

This presentation presents progress of high-fidelity multidisciplinary simulations for the NASA lift+cruise vertical takeoff and landing (VTOL) urban air mobility concept aircraft in hover. The study focuses on the unsteady flow solutions featuring strong wake interactions between rotors and the airframe. The simulations couple a high-fidelity aerodynamic model with a comprehensive rotorcraft aeromechanics tool with rotor rotation-speed trim. The aerodynamic model is based on the Reynolds-averaged Navier-Stokes equations using the one-equation Spalart-Allmaras turbulence model with rotation correction. Unsteady aerodynamic flows are computed on a dynamic, deformable, unstructured, overset grid system. An integrated overset-grid assembler is used to construct the composite grid from 23 component grids and facilitate communications between individual component grids. Rotor performance and airframe forces and moments are computed and compared on two unstructured grids. The study demonstrates capabilities of high-fidelity multidisciplinary analysis tools to capture the strong unsteady flowfield around this multi-rotor aircraft in hover.

CFD↗

Hot deformation behavior and flow stress modeling of a Ni-based superalloy

The deformation behavior of a novel Ni-based superalloy was investigated using isothermal compression on a Gleeble system at temperatures between 1050 and 1210 °C with strain rates between 0.001 and 0.1 s –1 . Flow-stress curves and electron backscatter diffraction maps were employed to experimentally identify the various flow mechanisms operative during deformation. Deformation at temperatures below 1130 °C presented strong work hardening with limited restoration during dynamic softening leading to partially recrystallized microstructures. Increasing the deformation temperature to and above 1130°C enhanced the driving force for dislocation and grain boundary mobility thereby enabling dynamic recovery (DRV) and dynamic recrystallization (DRX) mechanisms to better operate. Here, the influence of the strain rate was more evident during deformation at these temperatures. Increasing the strain rate from 0.001 s –1 to 0.1 s –1 resulted in a transition in dominant softening mechanism from DRV to DRX. Flow stress modeling using the Zener-Hollomon parameter was performed to obtain the activation energy and the constitutive equation for hot deformation of the alloy. Strong changes in flow behavior affected the accuracy of the flow stress model, and thus, the model was used alternatively to identify deformation parameters associated with various flow regimes. In doing so, the activation energy and the other equation constants were obtained for each deformation mechanism observed experimentally.

36 MATERIALS SCIENCE↗

The Origin of Regioselectivity in 2-butanol Dehydration on Solid Acid Catalysts

The origin in the variations of trans-/cis-2-butene product selectivity ratios in 2-butanol dehydration over solid acid catalysts were investigated using a combined experimental-theory approach. Reactivity measurements over γ-Al2O3, AlOx/SBA-15, and H-form zeolites with widely varying Si/Al ratios and pore structures showed over two orders of magnitude change in the trans-/cis-2-butene product ratio. Activation energy barriers calculated for the concerted C-O and β-C-H bond breakings of adsorbed butoxy intermediates by dispersion-corrected DFT calculations correctly predicted the trans-/cis-2-butene product ratio observed on γ-Al2O3. The very low trans-2-butene selectivity on γ-Al2O3 can now be understood by the formation of a late transition state with high energy barrier caused by the strong van der Waals interaction between the γ-H atoms and the flat catalyst surface. Decreasing the dispersive attractive force between the adsorbed butoxide and the surface (e.g., by moving it further away from the support surface in AlOx/SBA-15) leads to almost equimolar formation of the trans- and cis-2-butene isomers. Trans-/cis-2-butene selectivity ratios much higher than that dictated by thermodynamic equilibrium can be achieved by introducing additional geometric constraints around the active catalytic site (e.g., varying the 3D environment around the active center in zeolites). We propose a model to explain the widely varying trans-/cis-2-butene selectivity in 2-butanol dehydration over solid acid catalysts that is consistent with the experimental results in this study. A key outcome of the study is the realization that van der Waals interactions between the reactant and the active catalyst surface must be included in the theoretic models in order to be able to accurately predict product selectivities. This information, in turn, significantly advances our ability to develop catalyst materials with designed active centers in order to achieve desired regioselectivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Robust late twenty-first century shift in the regional monsoons in RegCM-CORDEX simulations

Abstract We use an unprecedented ensemble of regional climate model (RCM) projections over seven regional CORDEX domains to provide, for the first time, an RCM-based global view of monsoon changes at various levels of increased greenhouse gas (GHG) forcing. All regional simulations are conducted using RegCM4 at a 25 km horizontal grid spacing using lateral and lower boundary forcing from three General Circulation Models (GCMs), which are part of the fifth phase of the Coupled Model Inter-comparison Project (CMIP5). Each simulation covers the period from 1970 through 2100 under two Representative Concentration Pathways (RCP2.6 and RCP8.5). Regional climate simulations exhibit high fidelity in capturing key characteristics of precipitation and atmospheric dynamics across monsoon regions in the historical period. In the future period, regional monsoons exhibit a spatially robust delay in the monsoon onset, an increase in seasonality, and a reduction in the rainy season length at higher levels of radiative forcing. All regions with substantial delays in the monsoon onset exhibit a decrease in pre-monsoon precipitation, indicating a strong connection between pre-monsoon drying and a shift in the monsoon onset. The weakening of latent heat driven atmospheric warming during the pre-monsoon period delays the overturning of atmospheric subsidence in the monsoon regions, which defers their transitioning into deep convective states. Monsoon changes under the RCP2.6 scenario are mostly within the baseline variability.

54 ENVIRONMENTAL SCIENCES↗

Greenhouse-gas forced changes in the Atlantic meridional overturning circulation and related worldwide sea-level change

Abstract The effect of anthropogenic climate change in the ocean is challenging to project because atmosphere-ocean general circulation models (AOGCMs) respond differently to forcing. This study focuses on changes in the Atlantic Meridional Overturning Circulation (AMOC), ocean heat content ( $$\Delta$$ Δ OHC), and the spatial pattern of ocean dynamic sea level ( $$\Delta \zeta$$ Δ ζ ). We analyse experiments following the FAFMIP protocol, in which AOGCMs are forced at the ocean surface with standardised heat, freshwater and momentum flux perturbations, typical of those produced by doubling $$\hbox {CO}_{{2}}$$ CO 2 . Using two new heat-flux-forced experiments, we find that the AMOC weakening is mainly caused by and linearly related to the North Atlantic heat flux perturbation, and further weakened by a positive coupled heat flux feedback. The quantitative relationships are model-dependent, but few models show significant AMOC change due to freshwater or momentum forcing, or to heat flux forcing outside the North Atlantic. AMOC decline causes warming at the South Atlantic-Southern Ocean interface. It does not strongly affect the global-mean vertical distribution of $$\Delta$$ Δ OHC, which is dominated by the Southern Ocean. AMOC decline strongly affects $$\Delta \zeta$$ Δ ζ in the North Atlantic, with smaller effects in the Southern Ocean and North Pacific. The ensemble-mean $$\Delta \zeta$$ Δ ζ and $$\Delta$$ Δ OHC patterns are mostly attributable to the heat added by the flux perturbation, with smaller effects from ocean heat and salinity redistribution. The ensemble spread, on the other hand, is largely due to redistribution, with pronounced disagreement among the AOGCMs.

54 ENVIRONMENTAL SCIENCES↗

Topological crystalline insulator nanomembrane with strain-tunable band gap

The ability to fine-tune band gap and band inversion in topological materials is highly enticing for the development of novel functional devices. In this work we propose that the electronic properties of free-standing nanomembranes of the topological crystalline insulators (TCI) SnTe and Pb1–x Sn x (Se,Te) are highly tunable by engineering elastic strain and membrane thickness, resulting in tunable band gap and giant piezoconductivity. Membrane thickness governs the hybridization of topological electronic states on opposite surfaces, while elastic strain can further modulate the hybridization strength by controlling the penetration length of surface states. We introduce a frequency-resolved infrared photodetector using force-concentration induced inhomogeneous elastic strain in TCI nanomembranes with spatially varying width. The predicted tunable band gap accompanied by strong spin-textured electronic states will open new avenues for fabricating piezoresistive devices, infrared detectors and energy-efficient electronic and spintronic devices based on TCI nanomembrane.

36 MATERIALS SCIENCE↗

Fundamental parameters governing ion conductivity in polymer electrolytes

We analyze conductivity of polymerized ionic liquids with focus on fundamental limitations hindering faster charge transport in polymer electrolytes. We emphasize that to achieve the required ionic conductivity ~10 -3 S/cm in dry polymer electrolytes, a decoupling of ion transport from segmental dynamics is required. We demonstrate that two competing mechanisms control decoupling of ion transport: electrostatic interactions that dominates for small ions such Li, and elastic force that dominates for large ions. Our experimental results indeed confirm significant contribution of the elastic force to the energy barrier controlling transport of large ions. We also emphasize importance of ion-ion correlations that strongly affect charge transport (conductivity) even at the same ion diffusivity. Our analysis suggests that these correlations suppress ion conductivity in polymer electrolytes by about ten times. At the end, we formulate some ideas on design of polymer electrolytes with high ion conductivity.

36 MATERIALS SCIENCE↗

An Investigation of the Performance of the Unified Monte Carlo Method of Neutron Cross Section Data Evaluation

The Unified Monte Carlo method (UMC) has been suggested to avoid certain limitations and approximations inherent to the well-known Generalized Least Squares (GLS) method of nuclear data evaluation. This contribution reports on an investigation of the performance of the UMC method in comparison with the GLS method. This is accomplished by applying both methods to simple examples with few input values that were selected to explore various features of the evaluation process that impact upon the quality of an evaluation. Among the issues explored are: i) convergence of UMC results with the number of Monte Carlo histories and the ranges of sampled values; ii) a comparison of Monte Carlo sampling using the Metropolis scheme and a brute force approach; iii) the effects of large data discrepancies; iv) the effects of large data uncertainties; v) the effects of strong or weak model or experimental data correlations; and vi) the impact of ratio data and integral data. Comparisons are also made of the evaluated results for these examples when the input values are first transformed to comparable logarithmic values prior to performing the evaluation. Some general conclusions that are applicable to more realistic evaluation exercises are offered.

99 GENERAL AND MISCELLANEOUS↗

Upconversion on the Micrometer Scale: Impact of Local Heterogeneity

The properties of perovskite/naphtho[2,3-a]pyrene (NaPy) upconversion devices are investigated by a combination of atomic force microscopy and photoluminescence mapping to understand the role of microscopic heterogeneity in the ensemble device properties. The results emphasize strong microscopic inhomogeneity across the perovskite/NaPy upconversion device due to local formation of NaPy microcrystals. NaPy shows emission from three distinct states in the solid state: S 1 ′ emission at 520 nm, excimer emission at 560 nm, and S 1 ″ emission at 620 nm. Clear spatial differences in the emission spectrum under 405 nm excitation are found, highlighting that there is a strong microcrystal-to-microcrystal variation in the optical properties─emphasizing a need for multimodal measurements. Furthermore, our results indicate that microcrystals with strong emission from the strongly coupled low-energy state S 1 ″ (J-dimer) show much higher upconversion intensity than those with dominant emission from the high-energy S 1 ′ state (I-aggregate). Hence, our results suggest that microcrystals with strong emission from the low-energy state S 1 ″ act as isolated hotspots for upconversion.

Crystals↗

Why is MP2-Water "Cooler" and "Denser" than DFT-Water?

To maintain water in the liquid phase at the correct (1 g/cm3) density during first-principles simulations, density-functional theory (DFT) with a dispersionless generalized-gradient-approximation (GGA) functional requires a much higher temperature and pressure than the ambient conditions. Conversely, ab initio second-order many-body perturbation (MP2) calculations of liquid water performed by Del Ben et al. [J. Chem. Phys. Lett. 4, 3753 (2013); J. Chem. Phys. 143, 054506 (2015)] and by us [Willow et al., Sci. Rep. 5, 14358 (2015)] required a lower temperature and a negative pressure than DFT to keep water liquid. Here, we present a unifying explanation of these trends derived from classical water simulations using a polarizable force field with different sets of parameters. We show that the calculated temperature and pressure of the liquid phase are strongly correlated with the polarizability of water and the dispersion interaction, respectively. In DFT/GGA, the polarizability and thus the induced dipole moments and the hydrogen-bond strength are all overestimated. This hinders the rotational motion of molecules and requires a higher temperature for water to be liquid. In MP2 and DFT/GGA, the dispersion interaction is stronger and weaker (or lacking), respectively. This explains why liquid water contracts uniformly and becomes too dense in MP2, whereas the opposite is the case for dispersionless DFT/GGA.

Willow, Soohaeng Y.↗

Connecting Pressure-Saturation and Relative Permeability Models to Fracture Properties: The Case of Capillary-Dominated Flow of Supercritical CO 2 and Brine

Fractures are potential pathways for subsurface fluids. In the context of geologic CO 2 sequestration, fractures could threaten the security of reservoirs since they are pathways for leakage. However, the constitutive equations describing the pressure-saturation and relative permeability-saturation, key inputs for flow modeling and prediction, are poorly understood for two-phase fracture flow at the field scale where each fracture might be an element of a complex fracture network or dual-porosity domain. This knowledge is required for the safe storage of CO 2 under potentially fractured caprocks. To address this, we numerically simulated two-phase viscous flow through horizontal heterogeneous fractures across a broad range of roughness and aperture correlation length. The numerical experiments, which solved the modified local cubic law, showed a weak to strong phase interference during the drainage process; that is, supercritical CO 2 displaces brine if the imposed pressure + local viscous force > local capillary force. The drainage process ended when no new brine cells can be further invaded by CO 2 . Afterward, we froze the saturation field for each individual phase and calculated the relative permeability by single-phase flow modeling. Thousands of simulated pressure-saturation and relative permeability curves enabled us to estimate and connect the parameters of the Van-Genuchten model and of the generalized ν-type model to fracture roughness and aperture correlation length. In conclusion, this empirical connection will be useful for assessing and predicting immiscible two-phase flow in horizontal rough fractures at the large scale.

54 ENVIRONMENTAL SCIENCES↗