Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shuttle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Shuttle payload dynamic environments - Update

This paper represents a brief summary of a report titled, 'Shuttle Payload Bay Dynamic Environments Summary and Conclusion Report' prepared by the Jet Propulsion Laboratory for the NASA Office of Aeronautics and Space Technology (OAST). The report provides a summary of the dynamic environmental data taken during the first five Space Shuttle flights. The present paper is concerned with a brief synopsis of the report's acoustic and high frequency data evaluation, taking into account also an example acoustic prediction method. Attention is given to an acoustic data summary, a vibration data summary, environmental uncertainties, data reduction errors, spatial bias errors, payload effects, spatial variation, flight to flight variation, payload prediction, and an example prediction.

Oconnell, M.↗

A Shuttle free flyer qualification/acceptance program - Galileo

The next U.S. planetary mission, the Galileo Project, is to be launched in late spring 1986. Primary studies to be conducted are related to the chemical composition and physical state of Jupiter's atmosphere, the chemical composition and physical state of the Jovian satellites, and the structure and physical dynamics of the Jovian magnetosphere. The studies are to be performed with the aid of a planetary Orbiter and an atmospheric entry Probe. At launch and during the interplanetary cruise trip to Jupiter, the Orbiter and Probe will form an integrated spacecraft. The Shuttle will be employed in the launch of the spacecraft. A Centaur high energy upper stage is to transfer the spacecraft from the Shuttle parking orbit to the direct earth-to-Jupiter trajectory. Attention is given to Galileo environmental program special characteristics and major influencing factors.

Schlue, J. W.↗

Space Shuttle Main Engine overhaul program

The Space Shuttle Main Engine first flight set from the Orbiter Columbia was returned to Rockwell International/Rocketdyne Division in Canoga Park, California for overhaul after five successful development flights. The three main engines have been completely disassembled and the hardware assessed for space flight effects. Schedules to overhaul subsequent flight engines have been established based on operational requirements of the Space Transportation System. To support these requirements, a dedicated Space Shuttle Main Engine Overhaul Center is being built at the Canoga Park Rocketdyne Facility incorporating the latest in manufacturing, inspection, and data processing equipment.

Stohler, S.↗

Space Shuttle main engine product improvement

The current design of the Space Shuttle Main Engine has passed 11 certification cycles, amassed approximately a quarter million seconds of engine test time in 1200 tests and successfully launched the Space Shuttle 17 times of 51 engine launches through May 1985. Building on this extensive background, two development programs are underway at Rocketdyne to improve the flow of hot gas through the powerhead and evaluate the changes to increase the performance margins in the engine. These two programs, called Phase II+ and Technology Test Bed Precursor program are described. Phase II+ develops a two-tube hot-gas manifold that improves the component environment. The Precursor program will evaluate a larger throat main combustion chamber, conduct combustion stability testing of a baffleless main injector, fabricate an experimental weld-free heat exchanger tube, fabricate and test a high pressure oxidizer turbopump with an improved inlet, and develop and test methods for reducing temperature transients at start and shutdown.

Lucci, A. D.↗

Space Shuttle Main Engine operational status

The Space Shuttle Main Engine (SSME) has been launched 51 times during 17 launches of the Space Shuttle through May 1985. The engine performance during those launches is described revealing successful engine operation under nominal and off-nominal conditions. Engine maintenance is discussed, explaining the cause for each engine removed and replaced. Turbopump maintenance, life, and mean time between replacement are all analyzed. Life improvement plans are outlined. Overall cost per flight experienced to date in both manpower and material is revealed. Overall accomplishments of the SSME in launch operations to date are summarized.

Klatt, F.↗

Space Shuttle security policies and programs

The Space Shuttle vehicle consists of the orbiter, external tank, and two solid rocket boosters. In dealing with security two major protective categories are considered, taking into account resource protection and information protection. A review is provided of four basic programs which have to be satisfied. Aspects of science and technology transfer are discussed. The restrictions for the transfer of science and technology information are covered under various NASA Management Instructions (NMI's). There were two major events which influenced the protection of sensitive and private information on the Space Shuttle program. The first event was a manned space flight accident, while the second was the enactment of a congressional bill to establish the rights of privacy. Attention is also given to national resource protection and national defense classified operations.

Keith, E. L.↗

The definition of the Shuttle Tethered Aerothermodynamic Research Facility

Studies have been conducted to define the feasibility and practical limitations of the Shuttle Orbiter Tethered 'wind-tunnel' concept. This concept, referred to as the Shuttle Tethered Aerothermodynamic Research Facility (STARFAC), is proposed to provide researchers access to altitudes above 90 km to accomplish aerothermodynamic research in the rarefied upper atmosphere. Determining the feasibility and limitations of the concept has required the enhancement and/or development of mission simulation analytical techniques and control laws; the accomplishment of candidate mission simulations; the definition of instrumentation requirements, both for science and engineering; and the establishment of tether and satellite design requirements to meet STARFAC objectives. The results of the study, to date, indicate that such a concept is both feasible and practical. Representative results are presented, as are recommendations for continued studies which would result in program implementation.

Siemers, P. M., III↗

Space Shuttle ice prevention studies

Turbojet engine exhausts are being considered for the prevention of ice formation on the Space Shuttle External Tank (ET) when cryogenic propellants are loaded. The ice could dislodge and damage the Thermal Protection System tiles of the Shuttle Orbiter. An oil flow visualization technique was developed to quickly and inexpensively study the flowfields created by jet exhausts. The procedure can also determine the influence of geometry, jet exhausts, and wind conditions on the size and location of flow regions. A black tempra and kerosene mixture was applied to an ET model; the wind tunnel and jet flow were started; and when they stopped the flow patterns were photographed to determine which parameters had the greatest influence on the flowfields.

Porteiro, J. L. F.↗

Some real-time simulation applications to Space Shuttle approach and landing design and test

In the present discussion of the roles played by real time, man-in-the-loop engineering simulation in the development of NASA Space Shuttle approaches and landings, attention is given to the function of the simulator as a design and verification tool. Aspects of the problem posed by Shuttle landings, and the difficulties involved in this problem's quantification, are noted. Recent results of control system studies for pitch axis control, using fixed- and motion-base simulators, are discussed.

Law, H. G., III↗

Vehicle glow measurements on the space shuttle

From the combined data set of glow observations on shuttle flight STS-3, STS-4, STS-5, STS-8, STS-9, 41-E, and 41-G some of the properties of the shuttle glow are discussed. Comparison of the STS-3 and STS-5 (240 and 305 km altitude, respectively) photographs shows that the intensity of the glow is about a factor of 3.5 brighter on the low-altitude (STS-3) flight. In an experiment to observe the dependence of the intensity on the ram angle, the angle of incidence between the spacecraft surface normal and the velocity vector, the Orbiter was purposely rotated about the x axis on the STS-5 mission. For a relatively large angle between the velocity vector and the surface normal there is an appreciable glow, provided the surface is not shadowed by some other spacecraft structure. As the angle becomes less the glow intensifies. Material samples were also exposed in the ram direction during nightside orbits and the glow surrounding the samples was photographed.

Mende, S. B.↗

AE and DE mass spectrometer observations relevant to the shuttle glow

Recent work suggested that NO2 may be responsible for the observed continuum glow near surfaces of the space shuttle. The observations of atomic nitrogen (N) are reported at shuttle altitudes using mass spectrometers, giving special attention to the surface reactions of N relevant to the production of NO2 on spacecraft surfaces. Data from two semi-open sources mass spectrometers, the OSS instruments on the Atmosphere Explorer-C and -D satellites, and the closed source Neutral Atmospheric Composition Spectrometer (NACS) on the Dynamic Explorer-2 satellite are presented to show the similar behavior of NO in each case and the contrasting behavior of NO2. Although signals of NO and NO2 are highly dependent on surface temperature and surface composition, it appears that direct exposure of ion source surfaces to rammed gas is a necessary condition for the production of large amounts of NO2. Evidence that elevated surface temperatures can significantly reduce the production of NO2, likely by causing more rapid desorption of NO from these surfaces, is presented.

Engebretson, M. J.↗

The UV-VIS optical environment of the shuttle

During the Spacelab 1 shuttle mission, spectroscopic measurements were made of the atmospheric emissions over a broad wavelength range extending from the extreme ultraviolet to the near infrared. Those measurements were made under a variety of vehicle attitude and sunlight conditions. Superimposed on such spectra would be any features associated with the induced vehicle environment and its interaction with solar photons and the ambient neutral atmosphere and plasma. Various anomalies and unexpected features in the spectra from the perspective of possible shuttle-induced origins are discussed. The data indicate a dramatic cleanup of the vehicle environment over the course of the 10-day mission, a strong non-atmospheric red continuum underlying the spectra at night and at large angles to the velocity vector, and a variety of molecular band distributions which are not explained by the present understanding of the atmosphere.

Torr, M. R.↗

Enhanced N(+) Sub 2 in the Shuttle Environment

Observations were made of the N2 first negative and Meinel emission bands with the Imaging Spectrometric Observatory (ISO) on Spacelab 1. These observations have revealed the presence of N2 emissions which exceed those expected on the basis of current ionospheric models by up to a factor of 10. If the emission is of terrestrial origin, large unidentified ionospheric sources of N2 ions must exist. On the other hand, if the source is local to the shuttle environment, a mechanism must be found which is capable of generating emissions of such unexpectedly large intensity. Charge exchange of ambient ionospheric O+ ions with shuttle environmental N2, followed by resonance scattering of sunlight, as a candidate were suggested. However, this model implies that a cloud of N2 gases must surround the vehicle in concentrations in excess of 10 to the 11 c.c. cm with a scale length of tens of meters. In addition, the N2 residence time must be of the order of 10 sec.

Torr, D. G.↗

Users guide: Steady-state aerodynamic-loads program for shuttle TPS tiles

A user's guide for the computer program that calculates the steady-state aerodynamic loads on the Shuttle thermal-protection tiles is presented. The main element in the program is the MITAS-II, Martin Marietta Interactive Thermal Analysis System. The MITAS-II is used to calculate the mass flow in a nine-tile model designed to simulate conditions duing a Shuttle flight. The procedures used to execute the program using the MITAS-II software are described. A list of the necessry software and data files along with a brief description of their functions is given. The format of the data file containing the surface pressure data is specified. The interpolation techniques used to calculate the pressure profile over the tile matrix are briefly described. In addition, the output from a sample run is explained. The actual output and the procedure file used to execute the program at NASA Langley Research Center on a CDC CYBER-175 are provided in the appendices.

Kerr, P. A.↗

Characterization of real gas properties for space shuttle main engine fuel turbine and performance calculations

Real thermodynamic and transport properties of hydrogen, steam, the SSME mixture, and air are developed. The SSME mixture properties are needed for the analysis of the space shuttle main engine fuel turbine. The mixture conditions for the gases, except air, are presented graphically over a temperature range from 800 to 1200 K, and a pressure range from 1 to 500 atm. Air properties are given over a temperature range of 320 to 500 K, which are within the bounds of the thermodynamics programs used, in order to provide mixture data which is more easily checked (than H2/H2O). The real gas property variation of the SSME mixture is quantified. Polynomial expressions, needed for future computer analysis, for viscosity, Prandtl number, and thermal conductivity are given for the H2/H2O SSME fuel turbine mixture at a pressure of 305 atm over a range of temperatures from 950 to 1140 K. These conditions are representative of the SSME turbine operation. Performance calculations are presented for the space shuttle main engine (SSME) fuel turbine. The calculations use the air equivalent concept. Progress towards obtaining the capability to evaluate the performance of the SSME fuel turbine, with the H2/H2O mixture, is described.

Harloff, G. J.↗

Report of the Presidential Commission on the Space Shuttle Challenger Accident, Volume 5

This volume contains all the hearings of the Presidential Commission on the Space Shuttle Challenger accident from 26 February to 2 May 1986. Among others is the testimony of L. Mulloy, Manager, Space Shuttle Solid Rocket Booster Program, Marshall Space Flight Center and G. Hardy, Deputy Director, Science and Engineering, Marshall Space Flight Center.

Source record↗

Lateral stability and control derivatives extracted from five early flights of the space shuttle Columbia

Flight data taken from the first five flights (STS-2, 3, 4, 5 and 9) of the Space Transportation System Shuttle Columbia during entry are analyzed to determine the Shuttle lateral aerodynamic characteristics. Maximum likelihood estimation is applied to data derived from accelerometer and rate gyro measurements and trajectory, meteorological and control surface data to estimate lateral-directional stability and control derivatives. The estimated parameters are compared across the five flights and to preflight predicted values.

Schiess, J. R.↗

A densitometric analysis of IIaO film flown aboard the space shuttle transportation system STS-3, STS-8, and STS-7

Three canisters of IIaO film were prepared along with packets of color film from the National Geographic Society, which were then placed on the Space Shuttle #3. The ultimate goal was to obtain reasonably accurate data concerning the background fogging effects on IIaO film as it relates to the film's total environmental experience. This includes: the ground based packing, and loading of the film from Goddard Space Flight Center to Cape Kennedy; the effects of the solar wind, humidity, and cosmic rays; the Van Allen Belt radiation exposure; various thermal effect; reentry and off-loading of the film during take off, and 8 day, 3 hour 15 minutes orbits. The total densitometric change caused by all of the above factors were examined. The results of these studies have implications for the utilization of IIaO spectroscopic film on the future shuttle and space lab missions. These responses to standard photonic energy sources will have immediate application for the uneven responses of the film photographing a star field in a terrestrial or extraterrestrial environment with associated digital imaging equipment.

Hammond, E. C., Jr.↗