Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sim”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Search for a scalar partner of the top quark in the all-hadronic $t{\bar{t}}$ plus missing transverse momentum final state at $\sqrt{s}=13$ TeV with the ATLAS detector

A search for direct pair production of scalar partners of the top quark (top squarks or scalar third-generation up-type leptoquarks) in the all-hadronic $t{\bar{t}}$ plus missing transverse momentum final state is presented. The analysis of 139 $\hbox {fb}^{-1}$ of ${\sqrt{s}=13}$ TeV proton–proton collision data collected using the ATLAS detector at the LHC yields no significant excess over the Standard Model background expectation. To interpret the results, a supersymmetric model is used where the top squark decays via ${\tilde{t}} \rightarrow t^{(*)} {\tilde{\chi }}^0_1$ t ~ → t ( * ) χ ~ 1 0 , with $t^{(*)}$ t ( * ) denoting an on-shell (off-shell) top quark and ${\tilde{\chi }}^0_1$ χ ~ 1 0 the lightest neutralino. Three specific event selections are optimised for the following scenarios. In the scenario where $m_{{\tilde{t}}}> m_t+m_{{\tilde{\chi }}^0_1}$ m t ~ > m t + m χ ~ 1 0 , top squark masses are excluded in the range 400–1250 GeV for ${\tilde{\chi }}^0_1$ χ ~ 1 0 masses below 200 GeV at 95% confidence level. In the situation where $m_{{\tilde{t}}}\sim m_t+m_{{\tilde{\chi }}^0_1}$ m t ~ ~ m t + m χ ~ 1 0 , top squark masses in the range 300–630 GeV are excluded, while in the case where $m_{{\tilde{t}}}< m_W+m_b+m_{{\tilde{\chi }}^0_1}$ m t ~ < m W + m b + m χ ~ 1 0 (with $m_{{\tilde{t}}}-m_{{\tilde{\chi }}^0_1}\ge 5$ m t ~ - m χ ~ 1 0 ≥ 5 GeV), considered for the first time in an ATLAS all-hadronic search, top squark masses in the range 300–660 GeV are excluded. Limits are also set for scalar third-generation up-type leptoquarks, excluding leptoquarks with masses below 1240 GeV when considering only leptoquark decays into a top quark and a neutrino.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scaling properties of direct photon yields in heavy ion collisions

Abstract A recent analysis from the PHENIX collaboration of available direct photon measurement results in collisions of various systems such as Au+Au, Cu+Cu, and Pb+Pb, at different beam energies ranging from 39 to 2760 GeV, has shown a universal, within experimental uncertainties, multiplicity scaling, in which direct photon $$p_{T}$$ p T -spectra for transverse momenta up to 2 GeV/ c are scaled with charged hadron pseudorapidity density at midrapidity raised to power $$\alpha =1.25$$ α = 1.25 . On the other hand, those direct photon $$p_{T}$$ p T -spectra also exhibit geometrical scaling in the similar $$p_{T}$$ p T range. Assuming power-law dependence of the scaled photon spectra for both scaling laws, we formulate two independent conditions for the power $$\alpha $$ α , which overshoot experimental data by $$\sim 10\%$$ ∼ 10 % on average. We discuss possible sources that might improve this estimate.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

(Anti-)deuteron production in pp collisions at $\sqrt{s}=13 \ \text {TeV}$

The study of (anti-)deuteron production in pp collisions has proven to be a powerful tool to investigate the formation mechanism of loosely bound states in high-energy hadronic collisions. In this paper the production of $\text {(anti-)deuterons}$ is studied as a function of the charged particle multiplicity in inelastic pp collisions at $\sqrt{s}=13$ TeV using the ALICE experiment. Thanks to the large number of accumulated minimum bias events, it has been possible to measure (anti-)deuteron production in pp collisions up to the same charged particle multiplicity ( ${\mathrm {d} N_{ch}/\mathrm {d} \eta } \sim 26$ ) as measured in p–Pb collisions at similar centre-of-mass energies. Within the uncertainties, the deuteron yield in pp collisions resembles the one in p–Pb interactions, suggesting a common formation mechanism behind the production of light nuclei in hadronic interactions. In this context the measurements are compared with the expectations of coalescence and statistical hadronisation models (SHM).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for double-beta decay of $$\mathrm {^{130}Te}$$ to the $$0^+$$ states of $$\mathrm {^{130}Xe}$$ with CUORE

Abstract The CUORE experiment is a large bolometric array searching for the lepton number violating neutrino-less double beta decay ( $$0\nu \beta \beta $$ 0 ν β β ) in the isotope $$\mathrm {^{130}Te}$$ 130 Te . In this work we present the latest results on two searches for the double beta decay (DBD) of $$\mathrm {^{130}Te}$$ 130 Te to the first $$0^{+}_2$$ 0 2 + excited state of $$\mathrm {^{130}Xe}$$ 130 Xe : the $$0\nu \beta \beta $$ 0 ν β β decay and the Standard Model-allowed two-neutrinos double beta decay ( $$2\nu \beta \beta $$ 2 ν β β ). Both searches are based on a 372.5 kg $$\times $$ × yr TeO $$_2$$ 2 exposure. The de-excitation gamma rays emitted by the excited Xe nucleus in the final state yield a unique signature, which can be searched for with low background by studying coincident events in two or more bolometers. The closely packed arrangement of the CUORE crystals constitutes a significant advantage in this regard. The median limit setting sensitivities at 90% Credible Interval (C.I.) of the given searches were estimated as $$\mathrm {S^{0\nu }_{1/2} = 5.6 \times 10^{24} \, \mathrm {yr}}$$ S 1 / 2 0 ν = 5.6 × 10 24 yr for the $${0\nu \beta \beta }$$ 0 ν β β decay and $$\mathrm {S^{2\nu }_{1/2} = 2.1 \times 10^{24} \, \mathrm {yr}}$$ S 1 / 2 2 ν = 2.1 × 10 24 yr for the $${2\nu \beta \beta }$$ 2 ν β β decay. No significant evidence for either of the decay modes was observed and a Bayesian lower bound at $$90\%$$ 90 % C.I. on the decay half lives is obtained as: $$\mathrm {(T_{1/2})^{0\nu }_{0^+_2} > 5.9 \times 10^{24} \, \mathrm {yr}}$$ ( T 1 / 2 ) 0 2 + 0 ν > 5.9 × 10 24 yr for the $$0\nu \beta \beta $$ 0 ν β β mode and $$\mathrm {(T_{1/2})^{2\nu }_{0^+_2} > 1.3 \times 10^{24} \, \mathrm {yr}}$$ ( T 1 / 2 ) 0 2 + 2 ν > 1.3 × 10 24 yr for the $$2\nu \beta \beta $$ 2 ν β β mode. These represent the most stringent limits on the DBD of $$^{130}$$ 130 Te to excited states and improve by a factor $$\sim 5$$ ∼ 5 the previous results on this process.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum power: a Lorentz invariant approach to Hawking radiation

Particle radiation from black holes has an observed emission power depending on the surface gravity $\kappa = c^4/(4GM)$ as $$\begin{aligned} P_{\text {black hole}} \sim \frac{\hbar \kappa ^2}{6\pi c^2} = \frac{\hbar c^6}{96\pi G^2 M^2}, \end{aligned}$$ while both the radiation from accelerating particles and moving mirrors (accelerating boundaries) obey similar relativistic Larmor powers, $$\begin{aligned} P_{\text {electron}}= \frac{q^2\alpha ^2}{6\pi \epsilon _0 c^3}, \quad P_{\text {mirror}} =\frac{\hbar \alpha ^2}{6\pi c^2}, \end{aligned}$$ where $\alpha$ is the Lorentz invariant proper acceleration. This equivalence between the Lorentz invariant powers suggests a close relation that could be used to understand black hole radiation. We show that an accelerating mirror with a prolonged metastable acceleration plateau can provide a unitary, thermal, energy-conserved analog model for black hole decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Axions, WIMPs, proton decay and observable r in SO(10)

Abstract We explore some experimentally testable predictions of an SO (10) axion model which includes two 10-plets of fermions in order to resolve the axion domain wall problem. The axion symmetry can be safely broken after inflation, so that the isocurvature perturbations associated with the axion field are negligibly small. An unbroken gauge $$Z_2$$ Z 2 symmetry in SO (10) ensures the presence of a stable WIMP-like dark matter, a linear combination of the electroweak doublets in the fermion 10-plets and an SO (10) singlet fermion with mass $$\sim 62.5 \; \textrm{GeV}\; (1 \; \textrm{TeV}) $$ ∼ 62.5 GeV ( 1 TeV ) when it is mostly the singlet (doublet) fermion, that co-exists with axion dark matter. We also discuss gauge coupling unification, proton decay, inflation with non-minimal coupling to gravity and leptogenesis. With the identification of the SM singlet Higgs field in the 126 representation of SO (10) as inflaton, the magnetic monopoles are inflated away, and we find $$0.963 \lesssim n_s \lesssim 0.965$$ 0.963 ≲ n s ≲ 0.965 and $$0.003 \lesssim r \lesssim 0.036$$ 0.003 ≲ r ≲ 0.036 , where $$n_s$$ n s and r denote the scalar spectral index and tensor-to-scalar ratio, respectively. These predictions can be tested in future experiments such as CMB-S4.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Operation and performance of the MEG II detector

Abstract The MEG II experiment, located at the Paul Scherrer Institut (PSI) in Switzerland, is the successor to the MEG experiment, which completed data taking in 2013. MEG II started fully operational data taking in 2021, with the goal of improving the sensitivity of the$$\upmu ^+ \rightarrow {\textrm{e}}^+ \upgamma $$ μ + → e + γ decay down to$$\sim 6 \times 10^{-14}$$ ∼ 6 × 10 - 14 almost an order of magnitude better than the current limit. In this paper, we describe the operation and performance of the experiment and give a new estimate of its sensitivity versus data acquisition time.

Physics↗

Leveraging intermediate resonances to probe CP violation at colliders

We explore the phenomenological impact of interference in tree-level contributions to three-body final states in $2\rightarrow 3$ scattering processes. This work introduces a novel search strategy leveraging asymmetries to enable sensitivity to CP-violating effects in less well-explored regions of phase space. Analytically, we demonstrate the effectiveness of this observable in probing interference between Standard Model charged-current decays and effective left-handed vector interactions, illustrated in a toy model featuring a scalar leptoquark, $S_1 \sim (3, 1, -\,1/3)$. Numerically, we apply this framework to studying the process $pp\rightarrow b \tau \nu $; unlike traditional high-$p_T$ searches or “bump hunts”, this approach utilizes an intermediate energy regime – where new physics is neither light enough to be produced on shell or heavy enough to justify an effective field theory treatment. A proof-of-principle analysis at parton level demonstrates a percent-level asymmetry, with sensitivity also to BSM weak-CP phase. While the specific phase sensitivity is diminished at particle level due to showering and detector effects, a machine learning classifier can recover sensitively to the presence of SM-BSM interference, significantly outperforming standard analysis methods. Notably discrimination between BSM signal and SM background could be achieved at the 2$\sigma $ level for the current LHC dataset and 8$\sigma $ at the High-Luminosity LHC. Moreover, this asymmetry observable as defined can also be more broadly applied to other searches for CP-violation in $2\rightarrow 3$ processes in present and future collider environments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Searching for synchrotron emission from the geminga TeV halo using the planck satellite

Pulsars convert a significant fraction of their total spin-down power into very high-energy electrons, leading to the formation of TeV halos. While these halos are well characterized at TeV energies, it remains unclear whether pulsars also accelerate electrons efficiently at lower energies and how these particles propagate through their surrounding environments. We aim to test whether synchrotron emission from $\sim 50$–$300 \, \textrm{GeV}$ electrons around the Geminga pulsar can be detected in the frequency range observed by the Planck satellite. This would help constrain low-energy particle acceleration and diffusion in the vicinity of pulsars. We model the expected synchrotron emission from Geminga’s TeV halo based on various diffusion and injection spectrum scenarios and compare these predictions to publicly available multi-frequency Planck data. We find no conclusive evidence of spatially extended synchrotron emission associated with Geminga in any of Planck’s frequency bands. Our calculations show that even under favorable diffusion and injection conditions, the predicted synchrotron flux lies well below Planck’s measured background levels.

79 ASTRONOMY AND ASTROPHYSICS↗

Injection, confinement, and diagnosis of electrons and positrons in a permanent magnet dipole trap

Abstract Prerequisites for the goal of studying long-lived, magnetically confined, electron–positron pair plasmas in the laboratory include the injection of both species into the trap, long trapping times, and suitable diagnostic methods. Here we report recent progress on these tasks achieved in a simple dipole trap based on a supported permanent magnet. For the injection of electrons, both an $$\textbf{E}\times B$$ E × B drift technique (of a $$\sim $$ ∼ 2– $$\upmu $$ μ A, 6-eV beam) and “edge injection” (from a filament emitting a few mA and biased to some tens of volts) have been demonstrated; the former is suitable for low-density beams with smaller spatial and velocity spreads, while the latter employs fluctuations arising from collective behavior. To diagnose the edge-injected electrons, image potentials and currents induced on a wall probe, the magnet case, and wall electrodes were measured. Confinement of drift-injected positrons, measured experimentally, exhibited at least two well-separated timescales. Simulations reproduced this qualitatively, using a simple model of elastic collisions with residual background gas, and point to small adjustments for increasing trapping times. In a major upgrade to diagnostic capabilities, 25 bismuth germanate detectors, placed in three reentrant ports, are able to localize annihilation gammas, which will be used in future experiments to distinguish between different loss channels. Graphical abstract

von der Linden, J. (ORCID:0000000327477813)↗

A Deep Multimodal Representation Learning Framework for Accurate Molecular Properties Prediction

Drug discovery is a complex and challenging process, requiring the optimization of candidate compounds to identify those with the potential to become safe and effective drugs. Predicting molecular properties is an indispensable step in the drug discovery pipeline. Traditionally, this process is costly and time-intensive, involving multiple rounds of experiments and clinical trials, rendering it impractical for every candidate compound. Deep learning techniques have emerged as a promising approach to drug discovery to reduce the cost and time required to identify novel drugs. However, prevalent research in deep learning models focused on predicting molecular properties has primarily fixated on single-modal models, which utilize a single modality of data, neglecting the potential benefits of combining different data modalities. To overcome this limitation, we introduce MRL-Mol: a deep \textbf{M}ultimodal \textbf{R}epresentation \textbf{L}earning framework for accurate \textbf{Mol}ecular properties prediction. MRL-Mol harnesses three data modalities: sequence, graph, and image, augmenting the depth of comprehension. Leveraging a large-scale unlabeled dataset~($\sim$1M unique molecules), we pretrain MRL-Mol to extract inter- and intra-modal information. Our study demonstrates the superior performance of MRL-Mol in predicting molecular properties across six benchmark datasets, including both classification and regression tasks. Notably, MRL-Mol outperforms other state-of-the-art molecular properties prediction models. These findings suggest that by combining information from multiple data modalities, MRL-Mol can comprehend molecules better than single-modal deep learning models and identify molecular properties with better accuracy.

Yang, Yuxin↗

Cycling behavior of NCM523/graphite lithium-ion cells in the 3–4.4 V range: Diagnostic studies of full cells and harvested electrodes

Energy density of full cells containing layered-oxide positive electrodes can be increased by raising the upper cutoff voltage above the current 4.2 V limit. In this article we examine aging behavior of cells, containing LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM523)-based positive and graphite-based negative electrodes, which underwent up to ~400 cycles in the 3-4.4 V range. Electrochemistry results from electrodes harvested from the cycled cells were obtained to identify causes of cell performance loss; these results were complemented with data from X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectroscopy (SIMS) measurements. Our experiments indicate that the full cell capacity fade increases linearly with cycle number and results from irreversible lithium loss in the negative electrode solid electrolyte interphase (SEI) layer. The accompanying electrode potential shift reduces utilization of active material in both electrodes and causes the positive electrode to cycle at higher states-of-charge. Here, full cell impedance rise on aging arises primarily at the positive electrode and results mainly from changes at the electrode-electrolyte interface; the small growth in negative electrode impedance reflects changes in the SEI layer. Our results indicate that cell performance loss could be mitigated by modifying the electrode-electrolyte interfaces through use of appropriate electrode coatings and/or electrolyte additives.

30 DIRECT ENERGY CONVERSION↗

Tracer Film Growth Study of the Corrosion of Magnesium Alloys AZ31B and ZE10A in 0.01% NaCl Solution

We conducted a sequential isotopic tracer study of corrosion film growth for Mg-3Al-1Zn-0.25Mn (AZ31B) and Mg-1.2Zn-0.25Zr-<0.5Nd (ZE10A) by 4 h immersion in H 2 18 O or D 2 16 O, followed by a 20 h immersion in a 0.01 wt% NaCl H 2 18 O or D 2 16 O solution. Sputter depth profiles were obtained for 16 O, 18 O, H, and D using secondary ion mass spectrometry (SIMS). When compared to the previous tracer study for these alloys in salt-free water, the addition of 0.01 wt% NaCl resulted in a transition from oxygen inward-dominated film growth to a component of mixed inward/outward film growth for both alloys. The hydrogen tracer behavior remained inward growing for AZ31B, and short-circuit, inward growing for ZE10A, in both pure water and in 0.01 wt% NaCl solution, with extensive penetration of D beyond the film and into the underlying alloy also observed for ZE10A. Our analysis of the films by X-ray photoelectron spectroscopy (XPS) and cross-section scanning transmission electron microscopy (STEM) indicated intermixed Mg(OH) 2 and MgO, with the relative fraction of Mg(OH) 2 peaking near the center of the film. These findings suggest a decoupled film growth mechanism, with initial formation of oxide followed by NaCl-accelerated conversion to hydroxide, likely by both solid-state and dissolution-precipitation processes.

36 MATERIALS SCIENCE↗

ImagingSIMS/ImagingSIMS

ImagingSIMS is an open-source project for loading, analyzing, and visualizing secondary ion mass spectrometry (SIMS) data.

Tarolli, Jay↗

pnnl/DM-Sim

DM-Sim: Quantum Simulator on GPU Cluster using Density Matrix: a new simulation approach that significantly reduces communication overhead.

Li, Ang↗

Consideration of temperature-dependent emissivity of selective emitters in thermophotovoltaic systems

Spectral emissivity control is paramount for designing a high-efficiency selective emitter surface required for thermophotovoltaic (TPV) applications. Owing to the temperature dependency of materials optical constants, the spectral properties of a selective emitter surface changes with the emitter temperature. This paper presents the fabrication of a multilayer metal-dielectric ( ${\rm Si}_{3}{\rm N}_{4}/\rm W/Si_{3}{\rm N_{4}}$ ) coated tungsten selective emitter aimed for GaSb-based TPV systems and studies the dependence of its surface spectral emissivity, $\varepsilon (\lambda)$ , upon a temperature ranging from 300 K to 1500 K. Both the simulation and experimental methods were used to characterize $\varepsilon (\lambda)$ as a function of temperature. For wavelengths less than 1.4 µm, $\varepsilon (\lambda)$ was found to have a minimal dependence on temperature. Beyond 1.4 µm, $\varepsilon (\lambda)$ increases with the temperature. At 1.55 µm, the simulation and experimental data estimated a ${\sim}{{4}}\%$ greater emissivity at 1500 K than at room temperature. At 1500 K, the increased $\varepsilon (\lambda)$ at longer wavelengths lowered the spectral conversion efficiency of the selective emitter from 58% to 47%. The output power density, sub-bandgap loss, and TPV conversion efficiency ( ${\eta _{\rm TPV}}$ ) for a GaSb cell illuminated by the selective thermal emitter at 1500 K were estimated. ${\eta _{\rm TPV}}$ drops from 13.7% to 11% due to the increased sub-bandgap emission at 1500 K. Essential approaches for mitigating the sub-bandgap losses to further improve ${\eta _{\rm TPV}}$ are also discussed.

42 ENGINEERING↗

Multimodal and In-Situ Chemical Imaging of Critical Surfaces and Interfaces in Li Batteries

Interfaces play a critical role in the properties and lifetime of current generation and advanced batteries. However, detailed characterization of the critical interfaces during battery operation which can enable performance improvements and improved design has been a significant challenge requiring innovative technique development and creative experiments. This paper describes ways that information from a range of microscopy, spectroscopy, and spectrometry tools can be used to address important challenges associated with energy storage science and technology, in particular the development of advanced batteries for consumer use, transportation, , and renewable storage. Expanding the types of measurements that can be made on operational model batteries has significantly expanded the type and quality of information that can be obtained. This paper first shows examples of approaches being used to collect in situ transmission electron microscopy (TEM), secondary ion mass spectrometry (SIMS) and x-ray photoelectron spectroscopy data. The final section of the paper briefly shows two examples: the use of in situ XPS to examine SEI layers and a variety of methods including scanning TEM, atom probe tomography, scanning transmission x-ray microscopy (STXM), and x-ray adsorption near edge spectroscopy to understanding improve the performance of layered lithium transition metal oxide (LTMO) cathodes .

interface analysis, batteries in situ method, batt↗

Bayesian optimization of Fisher Information in nonlinear multiresonant quantum photonics gyroscopes

Abstract We propose an on-chip gyroscope based on nonlinear multiresonant optics in a thin film χ (2) resonator that combines high sensitivity, compact form factor, and low power consumption simultaneously. We theoretically analyze a novel holistic metric – Fisher Information capacity of a multiresonant nonlinear photonic cavity – to fully characterize the sensitivity of our gyroscope under fundamental quantum noise conditions. Leveraging Bayesian optimization techniques, we directly maximize the nonlinear multiresonant Fisher Information. Our holistic optimization approach orchestrates a harmonious convergence of multiple physical phenomena – including noise squeezing, nonlinear wave mixing, nonlinear critical coupling, and noninertial signals – all encapsulated within a single sensor-resonator, thereby significantly augmenting sensitivity. We show that ∼ 470 × $\sim 470{\times}$ improvement is possible over the shot-noise limited linear gyroscope with the same footprint, intrinsic quality factors, and power budget.

42 ENGINEERING↗