Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Monte Carlo turbulence simulation

The paper describes turbulence simulation experiments based on the principles of control system theory, that is, the construction of a system characterized by a system function such that upon exciting the system with prescribed noise processes the output of the system is a realization of a random processing the desired statistical attributes of turbulence. An experimental autocorrelation of Jimsphere measurements of wind velocity was approximated to simulate turbulent wind. From the approximate autocorrelation function, the required system function is obtained, and a discrete time system is designed. Another method of simulation is to solve the convolution integral by filter techniques. Other methods include discrete Fourier simulation and self-similar simulation.

Fichtl, G. H.↗
NASA NTRS1994

Clean assembly and integration techniques for the Hubble Space Telescope High Fidelity Mechanical Simulator

A mechanical simulator of the Hubble Space Telescope (HST) Aft Shroud was built to perform verification testing of the Servicing Mission Scientific Instruments (SI's) and to provide a facility for astronaut training. All assembly, integration, and test activities occurred under the guidance of a contamination control plan, and all work was reviewed by a contamination engineer prior to implementation. An integrated approach was followed in which materials selection, manufacturing, assembly, subsystem integration, and end product use were considered and controlled to ensure that the use of the High Fidelity Mechanical Simulator (HFMS) as a verification tool would not contaminate mission critical hardware. Surfaces were cleaned throughout manufacturing, assembly, and integration, and reverification was performed following major activities. Direct surface sampling was the preferred method of verification, but access and material constraints led to the use of indirect methods as well. Although surface geometries and coatings often made contamination verification difficult, final contamination sampling and monitoring demonstrated the ability to maintain a class M5.5 environment with surface levels less than 400B inside the HFMS.

Hughes, David W.↗
NASA NTRS2018

Digital Image Correlation Data Processing and Analysis Techniques to Enhance Test Data Assessment and Improve Structural Simulations

The NASA Shell Buckling Knockdown Factor Project (SBKF) was established in 2007 by the NASA Engineering and Safety Center (NESC) with the primary goal to develop new analysis-based buckling design factors (a.k.a. knockdown factors) and high-fidelity buckling simulations for selected launch-vehicle-like cylindrical shell structures. A series of tests are being conducted on large-scale metallic and composite cylindrical shells in order to provide validation data for these new factors and simulations. However, the validation of these new factors and simulations is quite demanding and requires test data that is commensurate with their fidelity. Traditional instrumentation, such as linear variable displacement transducers (LVDTs) and electrical-resistance strain gages serve a critical role in providing accurate displacement and strain measurements in these tests, but only allow for data to be recorded at a select number of point locations and are not sufficient to provide all the necessary validation data. Advanced measurement technologies can be used effectively to complement traditional instrumentation and gather additional data required to validate these structural simulations. In particular, three-dimensional digital image correlation (DIC) was implemented during SBKF cylinder testing to characterize the full-field displacement and strain behavior. Commercially available VIC-3DTM software and user-written data processing scripts were used to generate valuable data and insight into the complex buckling response of the cylinders that otherwise would be impossible to gather using traditional instrumentation. In addition, the measured data from DIC was used to verify measured test data obtained from other instrumentation, enhance test and analysis correlation, and help identify the root cause of anomalous test results that may have gone unexplained if only traditional instrumentation was used. Selected test results that demonstrate the use of DIC on the SBKF cylinders are presented and a portion of the data processing methods are described.

Gardner, Nathaniel W.↗
NASA NTRSDate not supplied

Investigation of Aerodynamic Matching Sensitivities for Conceptual Design

A methodology for aerodynamic matching was implemented in the Higher fidelity Conceptual Design and structural optimization (HCDstruct) tool to support transonic flutter simulations. The Enhanced Factor Correction Technique was implemented in HCDstruct to correct the Nastran doublet lattice method using data from corresponding computational fluid dynamics simulations. In this paper, sensitivities associated with this aerodynamic matching technique were investigated using HCDstruct and a Boeing 737-200-like aircraft configuration. Specifically, sensitivities of the aerodynamic matching method were investigated with respect to changes in flight conditions, such as changes in Mach number and angle of attack, and also in key design variables for the main wing, such as changes in aspect ratio and sweep angle. The variations in flight conditions and design parameters were mapped to estimated prediction error in sectional lift for the main wing, which helps to demonstrate the extent to which a user may expect a given aerodynamic correction matrix to provide suitable aerodynamic predictions for a realistic aircraft wing.

Jesse R. Quinlan↗
NASA NTRSDate not supplied

Investigation of Aerodynamic Matching Sensitivities for Conceptual Design

A methodology for aerodynamic matching was implemented in the Higher fidelity Conceptual Design and structural optimization (HCDstruct) tool to support transonic flutter simulations. The Enhanced Factor Correction Technique was implemented in HCDstruct to correct the Nastran doublet lattice method using data from corresponding computational fluid dynamics simulations. In this paper, sensitivities associated with this aerodynamic matching technique were investigated using HCDstruct and a Boeing 737-200-like aircraft configuration. Specifically, sensitivities of the aerodynamic matching method were investigated with respect to changes in flight conditions, such as changes in Mach number and angle of attack, and also in key design variables for the main wing, such as changes in aspect ratio and sweep angle. The variations in flight conditions and design parameters were mapped to estimated prediction error in sectional lift for the main wing, which helps to demonstrate the extent to which a user may expect a given aerodynamic correction matrix to provide suitable aerodynamic predictions for a realistic aircraft wing.

Jesse Ray Quinlan↗
DOE OSTI2024

Integrating Machine Learning Potential and X-ray Absorption Spectroscopy for Predicting the Chemical Speciation of Disordered Carbon Nitrides

Precise determination of atomic structural information in functional materials holds transformative potential and broad implications for emerging technologies. Spectroscopic techniques, such as X-ray absorption near-edge structure (XANES), have been widely used for material characterization; however, extracting chemical information from experimental probes remains a significant challenge, particularly for disordered materials. We present an integrated approach that combines atomic simulations, data-driven techniques, and experimental measurements to investigate chemical speciation of amorphous carbon nitride systems as a case study. Here, we discuss the development of machine learning potentials that can efficiently explore the vast configuration space of amorphous carbon nitrides. By employing statistical methods, this structural database enables the elucidation of the most representative local structures and how they evolve with chemical compositions and density. Density functional theory simulations are used to establish a correlation between the local structure and spectroscopic signatures, which then serve as the basis for interpreting and extracting chemical content from experimental data. Although our framework is specifically demonstrated for XANES and carbon nitrides, the approach described herein is readily adaptable as applied to other experimental characterization probes and materials classes.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Retrieval of wind temperature and pressure from single Doppler radar and a numerical model

A 4D data assimilation algorithm to obtain 3D wind and thermodynamic fields from radial velocities and a numerical model is derived. It is a blend of the continuous updating technique of Charney et al. (1969) and a diagnostic pressure and temperature retrieval technique suggested by Gal-Chen (1978). This model is tested only against model-generated data which are viewed as 'data observed from a real atmosphere'. A thermal bubble developing in a dry, neutral environment is simulated. The thermal recovery technique is found to be a necessary procedure to obtain successful data assimilation results. The present assimilation method is found to be capable of reducing the 'observational error' and making the assimilation run converge toward the control run. Without data insertion, errors in the nonobserved wind component are large.

Liou, Yu-Chieng↗
NASA NTRS2019

Bit Error Rate and Frame Error Rate Data Processing for Space Communications and Navigation-Related Communication System Analysis Tools

One of the capabilities that the Space Communications and Navigation (SCaN) Strategic Center for Networking, Integration, and Communications (SCENIC) user interface (UI) web application intends to provide its users is the addition of network protocol and link encryption augmentations of communication system analyses. Before any of these analyses capabilities can be modeled, the simulations of bit error rate (BER) and frame error rate (FER) against signal-to-noise ratio (SNR) have been conducted, requiring parameters from several known coding types (low-density parity-check (LDPC), convolutional, etc.), signal modulations (binary phase shift keying (BPSK), quadrature phase shift keying (QPSK), etc.), coding rates (1/2, 1/3, etc.), and frame sizes (1,280, 3,580, etc.). However, in order to extract useful information from the results of these simulations, a curve fitting technique has been applied to each resulting dataset to extend and extrapolate the curve fit of BER and FER down to 10–30 using MATLAB® Curve Fitting Toolbox™ (The MathWorks, Inc.). This is a necessary step because simulations of BER and FER were only performed to around 10–9 due to the extensive simulation time that would be required to obtain significant simulation results at the error levels desired. Furthermore, the fitted curve results were applied to a finer resolution for the SNR at 0.01-dB interval instead of the 0.05-dB interval limitation used in the simulation. All the possible combinations of the coding types, signal modulations, coding rates, frame sizes, and the extension of BER and FER curves would enable users to capture a wide range of link performances that directly relates to the addition of higher level networking data encapsulated in a frame. The curve fitting results also led to the modeling of the optical link error rate performance by solving for coding gain, FER_BER SNR delta, coded optical BER-SNR, and coded optical FER–SNR.

Communication link analysis↗
DOE OSTI2022

In silico design of microporous polymers for chemical separations and storage

Polymers of intrinsic microporosity (PIMs) are a family of materials with potential to be effective and scalable solutions for challenging adsorbent and membrane applications. The broad range of repeat unit chemistry, microporous structural features, and polymer processing makes exploration of the expansive PIM design space inefficient via chemical and materials intuition alone. Computational techniques such as molecular simulations and machine learning can provide a leap in capabilities to address this polymer design challenge and will be central to the future development of PIMs. In this work, we highlight recent microporous material studies that arrived at key results by employing computational techniques and provide our perspective on the prospects for in silico design and development of PIMs.

adsorption↗
NASA NTRS2012

End-To-End Simulation of Launch Vehicle Trajectories Including Stage Separation Dynamics

The development of methodologies, techniques, and tools for analysis and simulation of stage separation dynamics is critically needed for successful design and operation of multistage reusable launch vehicles. As a part of this activity, the Constraint Force Equation (CFE) methodology was developed and implemented in the Program to Optimize Simulated Trajectories II (POST2). The objective of this paper is to demonstrate the capability of POST2/CFE to simulate a complete end-to-end mission. The vehicle configuration selected was the Two-Stage-To-Orbit (TSTO) Langley Glide Back Booster (LGBB) bimese configuration, an in-house concept consisting of a reusable booster and an orbiter having identical outer mold lines. The proximity and isolated aerodynamic databases used for the simulation were assembled using wind-tunnel test data for this vehicle. POST2/CFE simulation results are presented for the entire mission, from lift-off, through stage separation, orbiter ascent to orbit, and booster glide back to the launch site. Additionally, POST2/CFE stage separation simulation results are compared with results from industry standard commercial software used for solving dynamics problems involving multiple bodies connected by joints.

Albertson, Cindy W.↗
DOE OSTI2017

Structure and structure-preserving algorithms for plasma physics

Hamiltonian and action principle (HAP) formulations of plasma physics are reviewed for the purpose of explaining structure preserving numerical algorithms. Geometric structures associated with and emergent from HAP formulations are discussed. These include conservative integration, which exactly conserves invariants, symplectic integration, which exactly preserves the Hamiltonian geometric structure, and other Hamiltonian integration techniques. Basic ideas of variational integration and Poisson integration, which can preserve the noncanonical Hamiltonian structure, are discussed. Metriplectic integration, which preserves the structure of conservative systems with both Hamiltonian and dissipative parts, is proposed. Two kinds of simulated annealing, a relaxation technique for obtaining equilibrium states, are reviewed: one that uses metriplectic dynamics, which maximizes an entropy at fixed energy, and the other that uses double bracket dynamics, which preserves Casimir invariants. Throughout, applications to plasma systems are emphasized. The paper concludes with a discussion of geometric electromagnetic particle-in-cell [Kraus et al., J. Plasma Phys. (to be published); e-print arXiv:1609.03053v1 [math.NA]], a particle in cell code that incorporates Hamiltonian and geometrical structure preserving properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1996

Dynamic Models for LES of Turbulent Front Propagation With a Spectral Method

Direct numerical simulation of turbulent reacting flows places extreme demands on computational resources. At the present time, simulations can be performed only for greatly simplified reaction systems and for very low Reynolds numbers. Direct simulation of more realistic cases occurring at higher Reynolds number and including multiple species and numerous chemical reactions will exceed available computational resources far into the future. Because of this, there is a clear need to develop the technique of large eddy simulation for reacting flows. Unfortunately this task is complicated by the fact that combustion arises from chemical reactions that occur at the smallest scales of the flow. Capturing the large-scale behavior without resolving the small-scale details is extremely difficult in combustion problems. Thus LES modeling for turbulent combustion encounters difficulties not present in modeling momentum transport, in which the main effect of the small scales is to provide dissipation. The difficulty is more pronounced in premixed combustion, where detailed chemistry plays an essential role in determining the flame speed (or overall burning rate); in nonpremixed combustion infinite rate chemistry can be assumed, eliminating the small scale features to a first approximation.

Im, H. G.↗
DOE OSTI2017

Advances in the Assessment of Wind Turbine Operating Extreme Loads via More Efficient Calculation Approaches

A new adaptive stratified importance sampling (ASIS) method is proposed as an alternative approach for the calculation of the 50 year extreme load under operational conditions, as in design load case 1.1 of the the International Electrotechnical Commission design standard. ASIS combines elements of the binning and extrapolation technique, currently described by the standard, and of the importance sampling (IS) method to estimate load probability of exceedances (POEs). Whereas a Monte Carlo (MC) approach would lead to the sought level of POE with a daunting number of simulations, IS-based techniques are promising as they target the sampling of the input parameters on the parts of the distributions that are most responsible for the extreme loads, thus reducing the number of runs required. We compared the various methods on select load channels as output from FAST, an aero-hydro-servo-elastic tool for the design and analysis of wind turbines developed by the National Renewable Energy Laboratory (NREL). Our newly devised method, although still in its infancy in terms of tuning of the subparameters, is comparable to the others in terms of load estimation and its variance versus computational cost, and offers great promise going forward due to the incorporation of adaptivity into the already powerful importance sampling concept.

17 WIND ENERGY↗
NASA NTRS1973

Investigations of lubricant rheology as applied to elastohydrodynamic lubrication

The pressure viscometer was modified to permit the measurement of viscosity at elevated pressures and shear stresses up to 5 x 10 to the 6th power N/sq m (720 psi). This shear stress is within a factor of three of the shear stress occurring in a sliding ehd point contact such as occurs in the ehd simulator. Viscosity data were taken on five lubricant samples, and it was found that viscous heating effects on the viscosity were predominant and not non-Newtonian behavior at the high shear stresses. The development of the infrared temperature measuring technique for the ehd simulator was completed, and temperature data for a set of operating conditions and one lubricant are reported. The numerical analysis of the behavior of nonlinear lubricants in the lubrication of rollers is reported.

Carlson, S.↗
NASA NTRS1976

Summary of flight tests to determine the spin and controllability characteristics of a remotely piloted, large-scale (3/8) fighter airplane model

An unpowered, large, dynamically scaled airplane model was test flown by remote pilot to investigate the stability and controllability of the configuration at high angles of attack. The configuration proved to be departure/spin resistant; however, spins were obtained by using techniques developed on a flight support simulator. Spin modes at high and medium high angles of attack were identified, and recovery techniques were investigated. A flight support simulation of the airplane model mechanized with low speed wind tunnel data over an angle of attack range of + or - 90 deg. and an angle of sideslip range of + or - 40 deg. provided insight into the effects of altitude, stability, aerodynamic damping, and the operation of the augmented flight control system on spins. Aerodynamic derivatives determined from flight maneuvers were used to correlate model controllability with two proposed departure/spin design criteria.

Holleman, E. C.↗
NASA NTRS1992

Direct particle simulation on the Connection Machine CM-2

Particle simulation is a useful technique for analyzing low density flows. The Connection Machine CM-2 is a useful test bed for studying the fine-grain data objects decomposition and the coarse-grain domain decomposition single instruction multiple datastream (SIMD) approaches to particle simulation. Both approaches are investigated for the model problem of uniform flow through a channel and the algorithms required for the SIMD domain decomposition approach are presented. An unresolved issue with the domain decomposition approach is the effect of a poor partitioning on flows with real geometries. Initial results with the channel flow problem indicate that a poor partitioning has only a small detrimental effect on the overall performance.

Dagum, L.↗
NASA NTRS1978

Numerical derivation of linear perturbation model from nonlinear real-time vehicle simulations - A means of validation and increased credibility

A numerical technique has been developed which generates linear perturbation models from nonlinear real-time aircraft vehicle simulations at Langley Research Center. The technique is very general and can be applied to simulations of any system described by nonlinear differential equations. Linear models about various trim conditions have been obtained from simulations of the Boeing 737, Northrop F5-E, Cessna 180, Sikorsky CH-54, and NASA/Army Rotor Systems Research Aircraft (RSRA). One use of the derived linear models is as a validation and verification tool for the nonlinear simulation.

Dieudonne, J. E.↗