Search NASA⌕ Search

SEARCH · Search NASA

Results for “acceleration factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Characterization of a multi-axis ion chamber array

Purpose: The aim of this work was to characterize a multi-axis ion chamber array (IC PROFILER; Sun Nuclear Corporation, Melbourne, FL USA) that has the potential to simplify the acquisition of LINAC beam data. Methods: The IC PROFILER (or panel) measurement response was characterized with respect to radiation beam properties, including dose, dose per pulse, pulse rate frequency (PRF), and energy. Panel properties were also studied, including detector-calibration stability, power-on time, backscatter dependence, and the panel's agreement with water tank measurements [profiles, fractional depth dose (FDD), and output factors]. Results: The panel's relative deviation was typically within ({+-}) 1% of an independent (or nominal) response for all properties that were tested. Notable results were (a) a detectable relative field shape change of {approx}1% with linear accelerator PRF changes; (b) a large range in backscatter thickness had a minimal effect on the measured dose distribution (typically less than 1%); (c) the error spread in profile comparison between the panel and scanning water tank (Blue Phantom, CC13; IBA Schwarzenbruck, DE) was approximately ({+-}) 0.75%. Conclusions: The ability of the panel to accurately reproduce water tank profiles, FDDs, and output factors is an indication of its abilities as a dosimetry system. The benefits of using the panel versus a scanning water tank are less setup time and less error susceptibility. The same measurements (including device setup and breakdown) for both systems took 180 min with the water tank versus 30 min with the panel. The time-savings increase as the measurement load is increased.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

6 GeV Parity Violating Deep Inelastic Scattering at Jefferson Laboratory

The 6 GeV Parity Violating Deep Inelastic Scattering (PVDIS) experiment has measured a 10{sup -4} level asymmetry through polarized electron scattering off a liquid deuterium target with a beam energy of 6 GeV. This experiment has a goal of measuring a combination of the product of the weak neutral couplings of the electron and the quark with a factor of six improvement in precision over world data. Precise data for the couplings are essential to search for physics beyond the Standard Model. The experiment took place in Hall A at Thomas Jefferson National Accelerator Facility (Jefferson Laboratory) and data collection was completed in the end of 2009. A highly specialized counting data acquisition system with an inherent particle identification was developed and utilized. We have taken data at two Q{sup 2} points in order to possibly address the hadronic correction due to higher twist effects. An overview of the experiment will be presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Effect of Ion Irradiation on Nanocrystallization and Surface Relief of a Ribbon from Fe{sub 72.5}Cu{sub 1}Nb{sub 2}Mo{sub 1.5}Si{sub 14}B{sub 9} Alloy

Using the methods of X-ray diffraction and atomic force microscopy, the process of crystallization of an amorphous Fe{sub 72.5}Cu{sub 1}Nb{sub 2}Mo{sub 1.5}Si{sub 14}B{sub 9} alloy irradiated with accelerated Ar{sup +} ions is investigated. It is found out that an irradiation by the Ar{sup +} ions with the energy 30 keV at the ion current density 300 μA/cm{sup 2} (fluence 3.75·10{sup 15} cm{sup –2}, irradiation time ~2 s, ion-beam short-duration heating up to 350°С, which is 150°С lower than the thermal crystallization threshold) results in a complete crystallization of this amorphous alloy (throughout the bulk of a 25 μm ribbon) followed by precipitation of solid solution crystals of α-Fe(Si), close in its composition to Fe{sub 80}Si{sub 20}, stable phase of Fe{sub 3}Si, and metastable hexagonal phases. By the methods of atomic force and scanning tunneling microscopy it is shown that nanocrystallization caused by ion irradiation is accompanied by surface relief changes both on the irradiated and unirradiated sides of the Fe{sub 72.5}Cu{sub 1}Nb{sub 2}Mo{sub 1.5}Si{sub 14}B{sub 9} alloy ribbon at the depth exceeding by a factor of 10{sup 3} that of the physical ion penetration for this material. The data obtained, taking into account a significant temperature decrease and multiple acceleration of the crystallization process, serve an evidence of the radiation-dynamic influence of accelerated ions on the metastable amorphous medium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NA48/2 Results and NA62 Perspectives

Recent results on rare and radiative {Kappa}{sup {+-}} decays from the NA48/2 experiment are reported. Among many rare decay modes, the analysis of {Kappa}{sup {+-}}{yields}{pi}{sup +}{pi}{sup -}e{sup {+-}}{nu} ({Kappa}{sub e4}) decays allows a quasi model-independent approach to the study of low energy {pi}{pi} scattering. With more than 1 million {Kappa}{sub e4} decays the form factors and their energy dependence are measured with an improved precision. In the channel {Kappa}{sup {+-}}{yields}{pi}{sup {+-}}{pi}{sup 0}{gamma} more than 1 million decays were reconstructed, leading to the first measurement of the interference between direct photon emission and inner bremsstrahlung contributions as well as new limits on CP violation. For {Kappa}{sup {+-}}{yields}{pi}{sup {+-}}{gamma}{gamma}, a precise measurement of the branching fraction was performed, based on more than 1000 events. In addition the perspectives of NA62 to measure the branching ratio of the very rare kaon decay {Kappa}{sup +}{yields}{pi}{sup +}{nu}{nu} at the CERN SPS are described.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Proposal for a Proton-Bunch Compression Experiment at IOTA in the Strong Space-Charge Regime

The longitudinal compression of intense proton bunches with strong space-charge force is an essential component of a proton-based muon source for a muon collider. This paper discusses a proton-bunch compression experiment at the Integrable Optics Test Accelerator (IOTA) storage ring at Fermilab to explore optimal radio frequency (RF) cavity and lattice configurations. IOTA is a compact fixed-energy storage ring that can circulate a 2.5-MeV proton beam with varying beam parameters and lattice configurations. The study will aim to demonstrate a bunch-compression factor of at least 2 in the IOTA ring while examining the impact of intense space-charge effects on the compression process.

43 PARTICLE ACCELERATORS↗

Electroproduction of Excited Baryons with the CLAS Detector in Hall B of Jefferson Lab

Recent results from Jefferson Lab (JLab) on the extraction of single-and double-polarization observables in both the 1{pi}-and 2{pi}-channel show their high sensitivity to resonant production amplitudes and therefore their importance for the extraction of resonance parameters. The CEBAF Large Acceptance Spectrometer (CLAS) has access to the baryon resonance (N*) form factors at high Q{sup 2}, which is advantageous for the study of the dynamical properties of nucleon resonances. In anticipation of the 12 GeV energy upgrade to JLab, our group plans to extract the electromagnetic transition form factors (electrocouplings) for many well-established excited nucleon states in the unexplored domain of Q{sup 2}>5 GeV{sup 5}. The expected data on resonance electro-couplings will allow us to systematically explore how in the strong interaction regime of QCD bare quarks are dressed with gluons and how quark cores of the various N* states emerge from QCD.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Isovalent Alloying and Heterovalent Substititution as Routes to Accelerate the Development and Optimization of Super-Efficient Halide Perovskite PV Solar Cells

Halide perovskites represent one of the fastest growing photovoltaic (PV) device technologies in the last decade, with research efficiencies among the highest confirmed. However, the research needed to advance tandem perovskite solar cells requires a specialized understanding base, but there is no such base for this young group of materials with the same depth as in semiconductor alloy research. Whereas IV-IV, II-V and II-VI semiconductors have a sophisticated science foundation refined over decades due of their use in electronics, lasers, LEDs and night vision applications, this is not yet the case for halide perovskites. At the same time, these materials behave rather differently than conventional semiconductors. Within the rapidly unfolding field of PV, the emerging halide-perovskite alloy research has largely been based on empiricism. Clearly, a concerted and comprehensive application to halide perovskite alloys of the modern quantum theory of solids brought us over the years a broad understanding of the critical factors enabling conventional inorganic PV could leapfrog the Edisonian, trial-and-error search for solutions to critical problems that are poorly understood. These theory approaches are required to accelerate the progress toward commercially ready hybrid-perovskites by providing a theory-guided experiment component to the EERE investments in this high-priority R&D. During this project we have studied three different rungs on the ladder of knowledge about hybrid perovskites. This kind of single halide perovskites represent the first level of development (rung 1) of solar cells, and includes materials such as APbI 3 , ASnI 3 , APbBr 3 , ASnBr 3 with different A cations, such as methylammonium (MA) with formamidinium (FM). Rung 2 is obtained by mixing B cations (Sn and Pb), and X anions (Cl and Br or I) producing a disordered alloy (A, A’)(M,M’)(X,X’) 3 -space. The most advanced rung corresponds to heterovalent-substitution of halide perovskites, creating an ordered double-perovskite compound. Although the focus of the project was on Rungs 2 and 3, we have made important discoveries regarding the nature of pure perovskites. We’ve observed that cubic perovskites should be modeled by a polymorphous network, instead of the basic single unit cell approach. This leads to the conclusion that perovskites have a fluid-like nature. An article regarding this work has been submitted to Nature Materials. Using the approach described above, we have also simulated alloys of halide perovskites, representing rung 2. We have focused on mixtures of [Cs,FA][Sn,Pb]I 3 with different concentrations, being able to disentangle the structural and electronic factors that determines the variation (bowing) of properties such as band gaps, mixing enthalpies and decomposition energies. For rung 3 compounds, we’ve closely interacted with experimental groups clarifying the chemical routes to obtain a certain compound, and what should be the most stable structure for them. As the final product, and consequent dissemination of the research, we’ve submitted two papers for publication, that are currently under evaluation. The interaction with experimental groups was also an important focus. We have participated in several local, national and international meetings, and reached out more closely to groups from CU Boulder and Arkansas.

14 SOLAR ENERGY↗

FULL ELECTROMAGNETIC SIMULATION OF COHERENT SYNCHROTRON RADIATION VIA THE LORENTZ-BOOSTED FRAME APPROACH

Numerical simulation of some systems containing charged particles with highly relativistic directed motion can by speeded up by orders of magnitude by choice of the proper Lorentz-boosted frame. Orders of magnitude speedup has been demonstrated for simulations from first principles of laser-plasma accelerator, free electron laser, and particle beams interacting with electron clouds. Here we address the application of the Lorentz-boosted frame approach to coherent synchrotron radiation (CSR), which can be strongly present in bunch compressor chicanes. CSR is particularly relevant to the next generation of x-ray light sources and is simultaneously difficult to simulate in the lab frame because of the large ratio of scale lengths. It can increase both the incoherent and coherent longitudinal energy spread, effects that often lead to an increase in transverse emittance. We have adapted the WARP code to simulate CSR emission along a simple dipole bend. We present some scaling arguments for the possible computational speed up factor in the boosted frame and initial 3D simulation results.

43 PARTICLE ACCELERATORS↗

Substantial increase in acceleration potential of pyroelectric crystals

We report on a substantial increase in the acceleration potential achieved with a LiTaO{sub 3} pyroelectric crystal. With a single 2.5 cm diameter and 2.5 cm long z-cut crystal without electric field-enhancing nanotip we produced positive ion beams with maximal energies between 300 and 310 keV during the cooling phase when the crystal was exposed to 5 mTorr of deuterium gas. These values are about a factor of 2 larger than previously obtained with single pyroelectric crystals.

36 MATERIALS SCIENCE↗

Soft-Fermion-Pole Mechanism to Single Spin Asymmetry in Hadronic Pion Production

Single spin asymmetry (SSA) is a twist-3 observable in the collinear factorization approach. We present a twist-3 single-spin-dependent cross section formula for the pion production in pp-collision, p{sup a}rrow upp->piX, relevant to RHIC experiments. In particular, we calculate the soft-fermion-pole (SFP) contribution to the cross section from the quark-gluon correlation functions. We show that its effect can be as large as the soft-gluon-pole (SGP) contribution owing to the large SFP partonic hard cross section, even though the derivative of the SFP function does not participate in the cross section.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reduction of structural loads using maneuver load control on the Advanced Fighter Technology Integration (AFTI)/F-111 mission adaptive wing

A transonic fighter-bomber aircraft, having a swept supercritical wing with smooth variable-camber flaps was fitted with a maneuver load control (MLC) system that implements a technique to reduce the inboard bending moments in the wing by shifting the spanwise load distribution inboard as load factor increases. The technique modifies the spanwise camber distribution by automatically commanding flap position as a function of flap position, true airspeed, Mach number, dynamic pressure, normal acceleration, and wing sweep position. Flight test structural loads data were obtained for loads in both the wing box and the wing root. Data from uniformly deflected flaps were compared with data from flaps in the MLC configuration where the outboard segment of three flap segments was deflected downward less than the two inboard segments. The changes in the shear loads in the forward wing spar and at the roots of the stabilators also are presented. The camber control system automatically reconfigures the flaps through varied flight conditions. Configurations having both moderate and full trailing-edge flap deflection were tested. Flight test data were collected at Mach numbers of 0.6, 0.7, 0.8, and 0.9 and dynamic pressures of 300, 450, 600, and 800 lb/sq ft. The Reynolds numbers for these flight conditions ranged from 26 x 10(exp 6) to 54 x 10(exp 6) at the mean aerodynamic chord. Load factor increases of up to 1.0 g achieved with no increase in wing root bending moment with the MLC flap configuration.

Thornton, Stephen V.↗

Acceleration of heavy multicharged ions in the interaction of a subrelativistic femtosecond laser pulse with a melted metal surface

Results are presented from experimental studies of ion acceleration under the action of femtosecond laser pulses with an intensity of 10{sup 17} W/cm{sup 2}, incident onto the free surfaces of melted gallium and indium. The effect of the polarization direction of a linearly polarized laser pulse and the amplitude of a short prepulse, which precedes the main pulse by several nanoseconds, on the parameters of accelerated ions is investigated. It is found that, even for such a moderate laser intensity, the characteristic velocity of fast ions ejected along the reflected beam is a factor of 1.5 higher than that of ions ejected along the normal to the target surface. It is shown that, as the prepulse energy increases, the hard X-ray yield and the mean energy of hot electrons increase substantially, whereas the velocity of both fast and slow ions decreases appreciably regard-less of laser polarization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Separate effects irradiation testing of miniature fuel specimens

We report that qualification of new nuclear fuels is necessary for their deployment and requires a thorough understanding of fuel behavior under irradiation. Traditionally, nuclear fuels have been qualified by performing exhaustive integral tests under a limited range of prototypic conditions designed for their specific reactor application. While some integral fuel testing is essential, basic data on behavior and property evolution under irradiation can be obtained from separate effects tests. These irradiations could offer reduced cost, reduced complexity, and in the case of accelerated testing, reduced time to achieve a given burnup. Furthermore, it may be desirable to design test irradiations capable of deconvoluting the myriad effects of burnup, temperature gradients, and other factors inherent to integral irradiation tests. Oak Ridge National Laboratory has developed an experimental capability to perform separate effects irradiation testing of miniature fuel specimens in the High Flux Isotope Reactor (HFIR): the “MiniFuel” irradiation vehicle. The small size (<4 mm 3 ) of the fuel specimens simplifies the design, analysis, and post-irradiation examination. By reducing the fuel mass, the total heat generated inside the experiment vehicle can be dominated by gamma heating in the structural materials instead of fission heating in the fuel. This essentially decouples the fuel temperature from the fission rate, allowing for highly accelerated testing (3X-18X the burnup rate of a typical light water reactor for 235 U enrichments varying from 0.22 wt% to 8 wt%) and an extremely flexible experiment design that can accommodate a wide range of fuel temperatures (~100 °C to >1200 °C), compositions, enrichments, and even geometries without requiring detailed analyses for each fuel variant. In conclusion, this paper summarizes the experiment design concept, evaluates potential applications for specific fuel forms, and briefly describes the first set of experiments on uranium nitride kernels that have been assembled and are currently being irradiated in the HFIR.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Exploring New Resin Systems for Nb3Sn Accelerator Magnets

Epoxy resins have long been a focus of magnet design. They provide strength and stability to the superconductor, to allow coil fabrication and consistent magnet performance. They are often cited as a main contributor to magnet performance, often as a limiting factor, from epoxy cracking and energy release. New resin systems are being designed to improve magnet quench and training performance through several means. Baseline candidate resin systems are evaluated for neat resin mechanical properties as well as behavior in Nb 3 Sn subscale composites. Furthermore, this data feeds additional resin system tuning to meet the goals stated above.

43 PARTICLE ACCELERATORS↗

Double Paddle‐Wheel Enhanced Sodium Ion Conduction in an Antiperovskite Solid Electrolyte

Abstract Antiperovskite structure compounds (X 3 AB, where X is an alkali cation and A and B are anions) have the potential for highly correlated motion between the cation and a cluster anion on the A or B site. This so‐called “paddle‐wheel” mechanism may be the basis for enhanced cation mobility in solid electrolytes. Through combined experiments and modeling, the first instance of a double paddle‐wheel mechanism, leading to fast sodium ion conduction in the antiperovskite Na 3− x O 1− x (NH 2 ) x (BH 4 ), is shown. As the concentration of amide (NH 2 − ) cluster anions is increased, large positive deviations in ionic conductivity above that predicted from a vacancy diffusion model are observed. Using electrochemical impedance spectroscopy, powder X‐ray diffraction, synchrotron X‐ray diffraction, neutron diffraction, ab initio molecular dynamics simulations, and NMR, the cluster anion rotational dynamics are characterized and it is found that cation mobility is influenced by the rotation of both NH 2 − and BH 4 − species, resulting in sodium ion conductivity a factor of 10 2 higher at x = 1 than expected for the vacancy mechanism alone. Generalization of this phenomenon to other compounds could accelerate fast ion conductor exploration and design.

25 ENERGY STORAGE↗

IMRT in a Pregnant Patient: How to Reduce the Fetal Dose?

The purpose of our study was to find a solution for fetal dose reduction during head-and-neck intensity modulated radiation therapy (IMRT) of a pregnant patient. The first step was optimization of the IMRT treatment plan with as few monitor units (MUs) as possible, while maintaining an acceptable dose distribution. The peripheral dose originating from the final IMRT plan was measured at distances reaching from the most proximal to the most distal fetal position, along the accelerator's longitudinal axis, using an anthropomorphic phantom extended with water-equivalent plastic. The measured peripheral dose was divided into leakage, and internal and collimator scatter, to find the degree to which each component influences the peripheral dose to build an appropriate shield. Collimator scatter was the greatest contributor to the peripheral dose throughout the range of the growing fetus. A shield was built and placed beneath the accelerator head, extending caudally from the field edge, to function as an extra collimator jaw. This shield reduced the fetal dose by a factor of 3.5. The peripheral dose components were also measured for simple rectangular fields and also here the collimator scatter was the greatest contributor to the peripheral dose. Therefore, the shielding used for the IMRT treatment of our patient could also be used when shielding in conventional radiotherapy. It is important for a radiation therapy department to be prepared for treatment of a pregnant patient to shield the fetus efficiently.

61 RADIATION PROTECTION AND DOSIMETRY↗

From Neutrino Factory to Muon Collider

After summarizing the important commonalities between neutrino factories and muon colliders, the key differences are discussed. These include a much larger needed cooling factor ({approx}10{sup 6} in six-dimensional emittance), a smaller number of muon bunches (perhaps only one of each charge), and acceleration to much higher energy, implying significantly different technical choices for some of the cooling and acceleration subsystems. The final storage rings are also quite different. Nevertheless, a neutrino factory could serve as a key stepping stone on the path to a muon collider.

43 PARTICLE ACCELERATORS↗