Search NASA⌕ Search

SEARCH · Search NASA

Results for “angle diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Mechanics of Granular Materials (MGM) Microgravity Experiment

The second series of MGM experiment was conducted during the STS-89 mission in January 1998. The experiment was previously flow on Atlantis's STS-79 mission in September 1996. Six displacement-controlled, drained triaxial compression experiments were performed at very low effective confining stresses. The confining stresses were in the ranges 0.05, 0.52 and 1.30 kPa. Three experiments were subjected to monotonic loading and unloading cycles while the other three experiments were subjected to cyclic loading. The results show very high peak strength friction angles in the range of 47.6 to 70.0 degrees, which are mainly due to overconsolidation and grain interlocking effects. It was observed that the residual strength levels in the monotonic loading experiments were in the same range as that observed at higher confining stress levels. The dilatancy angles were unusually high in the range of 30 to 31 degrees. All specimens display substantial initial stiffnesses and elastic moduli during unloading and reloading events, which are nearly an order of magnitude higher than conventional theories predict. A periodic instability phenomenon which appears to result from buckling of multiple internal arches and columnar systems, augmented by stick-slips was observed in the experiments. Computed Tomography (CT) measurements revealed valuable data about the internal fabric and the specimens deformation patterns. Uniform diffuse bifurcation with multiple radial shear bands was observed in the specimens tested in a microgravity environment. In the axial direction, two major conical surfaces were developed. Spatial nonsymmetrical deformations were observed in specimens tested in terrestrial laboratory.

Alshibli, Khalid A.↗

Manipulating the Crystallization Kinetics by Additive Engineering toward High-Efficient Photovoltaic Performance

Additive processing is proven to be an effective method to improve the efficiency and stability of perovskite solar cells; however, its intrinsic role in directing the crystallization pathway and thus morphology formation remains unknown. In situ grazing-incidence wide-angle x-ray scattering (GIWAXS) is applied to study the function of a 1,8-diiodooctane (DIO) additive in manipulating the crystallization behavior of perovskite thin films. It is seen that the DIO additive could induce multi-stage intermediate crystallization phases and increases the activation energy for nucleation and growth, which postpones the perovskite phase transformation time and broadens the transition zone. The elongated crystallization process affords improved perovskite thin film crystallinity and reduces defect density, which enables a longer carrier diffusion length. As a result, improved device efficiency, moisture, and thermal stability can be achieved. The following study provides a new prospective in understanding the additive function in perovskite thin film morphology control from fundamental parameters, indicating the importance of minor processing conditions in global property management toward high device performance.

36 MATERIALS SCIENCE↗

Characterization of Free Surface-Bound and Entrapped Water Environments in Poly(N-Isopropyl Acrylamide) Hydrogels via 1H HRMAS PFG NMR Spectroscopy

We found that different water environments in poly(N-isopropyl acrylamide) (PNIPAAm) hydrogels are identified and characterized using 1 H high resolution magic angle spinning (HRMAS) nuclear magnetic resonance (NMR). Local water environments corresponding to a “free” highly mobile species, along with waters showing restricted dynamics are resolved in these swollen hydro-gels. For photo-initiated polymerized PNIPAAm gels, an additional entrapped water species is observed. Spin–spin R 2 relaxation experiments support the argument of reduced mobility in the restricted and entrapped water species. Furthermore, by combining pulse field gradient techniques with HRMAS NMR it is possible to directly measure the self-diffusion rate for these different water environments. The behavior of the heterogeneous water environments through the lower critical solution temperature transition is described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid solution studies of layered honeycomb-ordered phases O₃–Na₃M₂SbO₆ (M=Cu, Mg, Ni, Zn)

Complete solid solutions with the composition Na₃M 2–x M´ x SbO₆ where M, M´=Cu, Mg, Ni, Zn have been synthesized by conventional solid state techniques and were investigated using X-ray diffraction, magnetic susceptibility and optical measurements. All compositions crystallize in a monoclinic unit cell and exhibit a layered structure with a honeycomb cationic ordering within the slabs. These compounds also exhibit Curie–Weiss behavior at high temperature and the magnetic moment values verify the presence of Cu²⁺ and/or Ni²⁺. The antiferromagnetic order of Na₃Ni₂SbO₆ is suppressed upon substitution of Ni²⁺ with Mg²⁺ or Zn²⁺. The spin gap observed in Na₃Cu₂SbO₆ is also suppressed by substitution of Cu²⁺ with Mg²⁺ or Zn²⁺. The Na₃Ni 2–x Cu x SbO₆ compositions follow an expected transition from an antiferromagnetic ordering to the spin gap of the copper end member. The estimated band gaps for these compounds have been determined from diffuse reflectance measurements. - Graphical abstract: Complete solid solutions with the composition Na₃M 2–x M´ x SbO₆ where M, M´=Cu, Mg, Ni, Zn have been synthesized using conventional solid state techniques and were investigated using X-ray diffraction, magnetism and optical measurements. Based on an ionic radii point of view the lattice parameter shifting in the composition containing copper are opposite of what would be expected. The Cu²⁺ is Jahn–Teller active which distorts the C2/m cell, increasing the β angle between the a and c parameters and explains this shifting pattern. Highlights: • The solid solutions O₃–Na₃M 2–x M´ x SbO₆(M, M´=Cu, Mg, Ni, Zn) were synthesized. • These compounds crystallize in the C2/m space group. • The Jahn–Teller active Cu²⁺ causes distortion of the monoclinic cell. • The Cu²⁺ spin gap magnetic properties are diluted upon 25% substitution. • All compositions are insulating and have large band gaps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hillock formation in co-deposited thin films of immiscible metal alloy systems

Hillocks are protruding sections of a surface that can influence the electronic and mechanical properties of a thin film. In monolithic films, these hillocks are formed due to thermally induced stress gradients during deposition. In this study, the surface morphology of co-sputtered immiscible Cu-X (X is a body centered cubic (BCC) group V or VI metal) thin films is characterized to elucidate the conditions that lead to hillock formation. Cu-Ta and Cu-Mo-Ag films were co-deposited with physical vapor deposition (PVD) magnetron sputtering at 25, 400, 600, and 800°C. A significant number of homogeneously distributed surface hillocks were observed only in the 600 and 800°C films. High-angle annular dark field (HAADF) cross-sectional imaging revealed significant Cu agglomerations underneath the protruding features. For the Cu-Ta films, the Cu was enveloped in a Cu-Ta nanocrystalline matrix. For Cu-Mo-Ag, the Cu was surrounded by Mo-Ag concentration modulations. While thermal stress gradients arise during deposition of immiscible metal films, biaxial stress calculations and literature cases reveal that they are not solely responsible for hillock formation. The observed morphologies align with a surface diffusion kinetic model that evaluates diffusion length of adatoms during deposition as a function of deposition temperature. Finally, this indicates a phase separation driving force paired with the constituent elements’ dissimilar mobilities at elevated deposition temperatures contribute to the presence of hillocks.

36 MATERIALS SCIENCE↗

Super-Resolved Single-Molecule Tracking Studies of Rhodamine B Accumulation on Fresh and Aged Polyethylene Terephthalate

It is well-known that toxic organic micropollutants (OMs) accumulate on the surfaces of microplastics. However, much remains to be learned about the exact molecular level mechanisms of OM accumulation and how these evolve as the plastics age. In this work, super-resolved single-molecule tracking (SMT) is used for the first time to investigate the accumulation of Rhodamine B (RhB) dye on fresh and artificially aged polyethylene terephthalate (PET) surfaces. PET thin films serve as models for microplastics, while RhB serves as a proxy for the OMs they accumulate. Artificial aging of the films is accomplished by exposing them in a UV-ozone chamber. Water contact angle, spectroscopic ellipsometry, and carbonyl index measurements reveal a gradual decrease in film hydrophobicity, thickness, and carbonyl content with age. Atomic force microscopy (AFM) data reveal an increase in surface roughness and confirm that the films remain largely intact and continuous across the aging times explored. In SMT experiments, wide-field fluorescence videos acquired from the water/PET interface under 7.5 pM RhB reveal both mobile and immobile dye molecules. Measurements of the frame-to-frame displacements of the dye show that diffusion occurs by a desorption-mediated mechanism and that the diffusion rate varies with PET film age. The surface density of mobile dye molecules decreases with increasing PET age, while the population of immobile molecules becomes relatively larger, suggesting an age-dependent transformation of the mechanism(s) by which the dye is accumulated. SMT data reveal that both mobile and immobile molecules repeatedly adsorb over the same surface sites, consistent with the emergence of nanoscale PET surface heterogeneity also revealed by AFM. Estimates of the adsorption coefficients are obtained using a nearest-neighbor analysis, giving values from 9.9 × 10 5 to 2.1 × 10 6 M –1 for immobile molecules and from 1.8 × 10 5 to 2.5 × 10 5 M –1 for mobile molecules on fresh and 5 min aged PET, respectively. Here, anomalous age-dependent variations in the velocity of molecular motion on the PET surface and in the population of immobile molecules are shown to correlate with changes in the strength of RhB adsorption.

Adsorption↗

Applying the Velocity Gradient Technique in NGC 1333: Comparison with Dust Polarization Observations

Magnetic fields (B-fields) are ubiquitous in the interstellar medium (ISM), and they play an essential role in the formation of molecular clouds and subsequent star formation. However, B-fields in interstellar environments remain challenging to measure, and their properties typically need to be inferred from dust polarization observations over multiple physical scales. In this work, we seek to use a recently proposed approach called the velocity gradient technique (VGT) to study B-fields in star-forming regions and compare the results with dust polarization observations in different wavelengths. The VGT is based on the anisotropic properties of eddies in magnetized turbulence to derive B-field properties in the ISM. We investigate that this technique is synergistic with dust polarimetry when applied to a turbulent diffused medium for the purpose of measuring its magnetization. Specifically, we use the VGT on molecular line data toward the NGC 1333 star-forming region ( 12 CO, 13 CO, C 18 O, and N 2 H + ), and we compare the derived B-field properties with those inferred from 214 and 850 μm dust polarization observations of the region using Stratospheric Observatory for Infrared Astronomy/High-Resolution Airborne Wide-band Camera Plus and James Clerk Maxwell Telescope/POL-2, respectively. We estimate both the inclination angle and the 3D Alfvénic Mach number M A from the molecular line gradients. Crucially, testing this technique on gravitationally bound, dynamic, and turbulent regions, and comparing the results with those obtained from polarization observations at different wavelengths, such as the plane-of-sky field orientation, is an important test on the applicability of the VGT in various density regimes of the ISM. We in general do not find a close correlation between the velocity gradient inferred orientations and the dust inferred magnetic field orientations.

79 ASTRONOMY AND ASTROPHYSICS↗

An Overview of Lunar Calibration and Characterization for the EOS Terra and Aqua MODIS

The Moon can be used as a stable source for Earth-observing sensors on-orbit radiometric and spatial stability monitoring in the VIS and NIR spectral regions. It can also serve as a calibration transfer vehicle among multiple sensors. Nearly identical copies of the Moderate Resolution Imaging Spectroradiometer (MODE) have been operating on-board the NASA's Earth Observing System (EOS) Terra and Aqua satellites since their launches in December 1999 and May 2002, respectively. Terra and Aqua MODIS each make observations in 36 spectral bands covering the spectral range from 0.41 to 14.5 microns and are calibrated on-orbit by a set of on-board calibrations (OBCs) including: 1) a solar diffuser (SD), 2) a solar diffuser stability monitor (SDSM), 3) a blackbody (BB), and 4) a spectro-radiometric calibration assembly (SRCA). In addition to fully utilizing the OBCs, the Moon has been used extensively by both Terra and Aqua MODIS to support their on-orbit calibration and characterization. A 4 This paper provides an overview of applications of lunar calibration and characterization from the MODIS perspective, including monitoring radiometric calibration stability for the reflective solar bands (RSBs), tracking changes of the sensors response versus scan-angle (RVS), examining the sensors spatial performance , and characterizing optical leaks and electronic crosstalk among different spectral bands and detectors. On-orbit calibration consistency between the two MODIS instruments is also addressed. Based on the existing on-orbit time series of the Terra and Aqua MODIS lunar observations, the radiometric difference between the two sensors is less than +/-1% for the RSBs. This method provides a powerful means of performing calibration comparisons among Earth-observing sensors and assures consistent data and science products for the long-term studies of climate and environmental changes.

Xiong, X.↗

Conceptual Design of a Two Spool Compressor for the NASA Large Civil Tilt Rotor Engine

This paper focuses on the conceptual design of a two spool compressor for the NASA Large Civil Tilt Rotor engine, which has a design-point pressure ratio goal of 30:1 and an inlet weight flow of 30.0 lbm/sec. The compressor notional design requirements of pressure ratio and low-pressure compressor (LPC) and high pressure ratio compressor (HPC) work split were based on a previous engine system study to meet the mission requirements of the NASA Subsonic Rotary Wing Projects Large Civil Tilt Rotor vehicle concept. Three mean line compressor design and flow analysis codes were utilized for the conceptual design of a two-spool compressor configuration. This study assesses the technical challenges of design for various compressor configuration options to meet the given engine cycle results. In the process of sizing, the technical challenges of the compressor became apparent as the aerodynamics were taken into consideration. Mechanical constraints were considered in the study such as maximum rotor tip speeds and conceptual sizing of rotor disks and shafts. The rotor clearance-to-span ratio in the last stage of the LPC is 1.5% and in the last stage of the HPC is 2.8%. Four different configurations to meet the HPC requirements were studied, ranging from a single stage centrifugal, two axi-centrifugals, and all axial stages. Challenges of the HPC design include the high temperature (1,560deg R) at the exit which could limit the maximum allowable peripheral tip speed for centrifugals, and is dependent on material selection. The mean line design also resulted in the definition of the flow path geometry of the axial and centrifugal compressor stages, rotor and stator vane angles, velocity components, and flow conditions at the leading and trailing edges of each blade row at the hub, mean and tip. A mean line compressor analysis code was used to estimate the compressor performance maps at off-design speeds and to determine the required variable geometry reset schedules of the inlet guide vane and variable stators that would result in the transonic stages being aerodynamically matched with high efficiency and acceptable stall margins based on user specified maximum levels of rotor diffusion factor and relative velocity ratio.

Veres, Joseph P.↗

Dynamics of water bound to crystalline cellulose

Interactions of water with cellulose are of both fundamental and technological importance. Here, we characterize the properties of water associated with cellulose using deuterium labeling, neutron scattering and molecular dynamics simulation. Quasi-elastic neutron scattering provided quantitative details about the dynamical relaxation processes that occur and was supported by structural characterization using small-angle neutron scattering and X-ray diffraction. We can unambiguously detect two populations of water associated with cellulose. The first is “non-freezing bound” water that gradually becomes mobile with increasing temperature and can be related to surface water. The second population is consistent with confined water that abruptly becomes mobile at ~260 K, and can be attributed to water that accumulates in the narrow spaces between the microfibrils. Quantitative analysis of the QENS data showed that, at 250 K, the water diffusion coefficient was 0.85 ± 0.04 × 10-10 m2sec-1 and increased to 1.77 ± 0.09 × 10-10 m2sec-1 at 265 K. MD simulations are in excellent agreement with the experiments and support the interpretation that water associated with cellulose exists in two dynamical populations. Our results provide clarity to previous work investigating the states of bound water and provide a new approach for probing water interactions with lignocellulose materials.

59 BASIC BIOLOGICAL SCIENCES↗

Radiation pressure and air drag effects on the orbit of the balloon satellite 1963 30D

Computed orbits of the balloon satellite 1963 30D are given every 2 days over an interval of 456 days near the beginning of the satellite's lifetime and an interval of 824 days near the end of its lifetime. The effects of radiation pressure on the satellite are examined in some detail. It is found that the variations in all the elements can be represented by use of a single parameter to specify the effect of diffuse reflection from the satellite's surface, and that this parameter remains constant, or nearly so, during the entire 7-year lifetime. Success in obtaining a consistent representation of the radiation-pressure effects is ascribed to the inclusion of the effects of terrestrial radiation pressure, using a model for the earth's albedo that includes seasonal and latitudinal variations. Anomalous effects in the orbital acceleration, as well as in the other elements, are represented quite well by including a small force at right angle to the solar direction and by allowing this to rotate about the solar direction. This implies that the satellite is aspherical, that it is rotating, and that the axis of rotation precesses.

Slowey, J. W.↗

The Aerogel Cerenkov detector for the SHMS magnetic spectrometer in Hall C at Jefferson Lab

Hadronic reactions producing strange quarks such as exclusive or semi-inclusive kaon production, play an important role in studies of hadron structure and the dynamics that bind the most basic elements of nuclear physics. The small-angle capability of the new Super High Momentum Spectrometer (SHMS) in Hall C, coupled with its high momentum reach - up to the anticipated 11-GeV beam energy in Hall C - and coincidence capability with the well-understood High Momentum Spectrometer, will allow for probes of such hadron structure involving strangeness down to the smallest distance scales to date. To cleanly select the kaons, a threshold aerogel Cerenkov detector has been constructed for the SHMS. The detector consists of an aerogel tray followed by a diffusion box. Four trays for aerogel of nominal refractive indices of n =1.030, 1.020, 1.015 and 1.011 were constructed. The tray combination will allow for identification of kaons from 1 GeV/c up to 7.2 GeV/c, reaching 10 -2 proton and 10 -3 pion rejection, with kaon detection efficiency better than 95%. The diffusion box of the detector is equipped with 14 five-inch diameter photomultiplier tubes. Its interior walls are covered with Gore diffusive reflector, which is superior to the commonly used Millipore paper and improved the detector performance by 35%. The inner surface of the two aerogel trays with higher refractive index is covered with Millipore paper, however, those two trays with lower aerogel refractive index are again covered with Gore diffusive reflector for higher performance. The measured mean number of photoelectrons in saturation is ~12 for n =1.030, ~8 for n =1.020, ~10 for n =1.015, and ~5.5 for n =1.011. Here the design details, the results of component characterization, and initial performance tests and optimization of the detector are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structured electrolytes facilitate Grotthuss-type transport for enhanced proton-coupled electron transfer reactions

Concentrated hydrogen-bonded electrolytes (CoHBEs) are structured, electrochemically stable, less-volatile alternatives to aqueous and dilute nonaqueous electrolytes, however, with high viscosities that limit molecular diffusion. This work provides an understanding of the proton conduction mechanism in CoHBEs based on mixtures of acids and azoles and establishes a link between the structurally dictated transport properties and the proton-coupled electron transfer (PCET) reaction rates that can be leveraged for enhancing electrochemical reactions. Diffusion and relaxation NMR studies suggest a breaking of the viscosity–conductivity tradeoff, where at high azole concentrations (>45 mol%), Grotthuss transport is more likely with lowered proton transfer energy barriers between the azole and the acid according to the machine learning (ML) accelerated ab initio path integral MD (AI-PIMD) simulations. Proton conduction pathways are found to be switchable between the hydrogen bonding networks of the acid and the azole, with imidazole chain forming structures better facilitating Grotthuss hopping. Supported by small-angle neutron scattering studies, the chains are found to have six member molecules on average with maximum of 3 to 4 imidazole/imidazoliums at 50 to 60 mol%. Despite their high viscosities, the measured PCET rates for quinones and phenazines measured in the protic CoHBEs present relatively high electron transfer rate constants (k 0 ~ 10 −4 cm/s), validated by rotating disc electrode and scanning electrochemical microscopy measurements. The results demonstrate that strategic tuning of hydrogen-bond donor–acceptor interactions enables the decoupling of proton transport and viscosity, thereby impacting PCET reactions.

electrokinetics↗

Interplanetary propagation of flare-associated energetic particles

The basic propagation process of flare-associated energetic particles in interplanetary space is studied on the basis of a model which combines a Gaussian coronal injection profile and interplanetary particle densities found by a theory of focused diffusion. The model is used to describe 30 electron and proton events which originate from the western hemisphere of the sun. A comparison of calculated and observed density profiles shows that the scattering mean free path is 0.1-0.3 AU for 4-80 MeV protons. The value is two or three times smaller for 0.5-1.1 and 3-12 MeV electrons. Thus the scattering mean free path is only slightly rigidity-dependent, contrary to that predicted by the quasi-linear theory of pitch-angle scattering. The rms width is found to be less than an hour for most proton and electron events. This width, which decreases with velocity, is not rigidity-dependent.

Ma Sung, L. S.↗

Migration of the separation point on a deforming cylinder

An iterative scheme of solving the Navier-Stokes equations for unsteady two-dimensional flow about a deforming and translating cylinder is given. In the kth iteration, the convected vorticity appears as the source term in an equation of transient diffusion of vorticity. A novel integral transform is used to reduce this transient vorticity equation to a k-dimensional heat equation. The bounded solution of this equation is obtained with a general method of superposition for problems involving a moving boundary. An equation describing the migration of the separation point on a deforming cylinder in unsteady cross flows is derived from the analytically obtained velocity field. The radial expansion of the cylinder surface is shown to hasten the separation time and to increase the separation angle. The results imply that in the steady flow past a body that is moving forward and sinking at constant rates, the locus of points at which the azimuthal component of skin friction changes sign originates on the leeward ray at a point downstream of the front tip.

Lin, S. P.↗

Interstellar dust properties from a survey of X-ray halos

Interstellar dust grains produce X-ray halos around bright sources due to small-angle X-ray scattering. Numerous studies have examined these halos, but no systematic study has yet tested the available halo data against the large number of well-defined dust models in circulation. We have therefore obtained the largest sample to date of X-ray dust halos from XMM-Newton and Chandra, and fitted them with 14 commonly used dust grain models, including comparisons with the optical extinction, A{sub V}, where available in the literature. Our main conclusions are summarized as follows. (1) Comparing A{sub V} with N{sub H} values measured via X-ray spectral fits, we find a ratio of A{sub V}/N{sub H} (10{sup 21} cm{sup −2}) = 0.48 ± 0.06, in agreement with previous work. (2) Out of 35 halos, 27 could be fit by one or more grain models, with the most successful models having maximum grain radius a{sub max}<0.4 μm and fewer large grains than the less successful models. This suggests that the diffuse ISM does not contain a signicant presence of grains with a{sub max}>0.5 μm. (3) Most halos were best fit assuming a single dust cloud dominated the scattering, rather than smoothly distributed dust along the sightline. (4) Eight sources could not be fit with the models considered here, most of which were along distant (d>5 kpc) sight lines through the Galactic thin disk. (5) Some sight lines had halos with observed X-ray scattering optical depth τ{sub sca}/A{sub V} that were signicantly different than expected. This may result from an inhomogeneous dust distribution across the halo extraction area.

79 ASTRONOMY AND ASTROPHYSICS↗

Microstructural and material property changes in severely deformed Eurofer-97

Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following HPT at room temperature to a maximum shear strain of 230, the average grain size reduced by a factor of ~30, with a marked increase in high-angle grain boundaries. Dislocation density also increased by more than one order of magnitude. The thermal stability of the deformed material was investigated via in-situ annealing during synchrotron X-ray diffraction. This revealed substantial recovery between 450 K – 800 K. Irradiation with 20 MeV Fe-ions to ~0.1 dpa caused a 20% reduction in dislocation density compared to the as-deformed material. However, HPT deformation prior to irradiation only had a minor effect in mitigating the irradiation-induced reductions in thermal diffusivity and surface acoustic wave velocity of the material. Microstructural and material property changes are dominated by deformation compared to irradiation. In light of this, the benefits of using HPT to improve the irradiation resistance of Eurofer-97 are limited. These results provide a multi-faceted view of the changes in ferritic/martensitic steels due to severe plastic deformation, and how these changes can be used to alter material properties.

ion-irradiation↗

Heterojunctions of model CdTe/CdSe mixtures

We report on the strain behavior of compound mixtures of model group II-VI semiconductors. We use the Stillinger-Weber Hamiltonian that we recently introduced, specifically developed to model binary mixtures of group II-VI compounds such as CdTe and CdSe. We also employ molecular dynamics simulations to examine the behavior of thin sheets of material, bilayers of CdTe and CdSe. The lattice mismatch between the two compounds leads to a strong bending of the entire sheet, with about a 0.5 to 1° deflection between neighboring planes. To further analyze bilayer bending, we introduce a simple one-dimensional model and use energy minimization to find the angle of deflection. The analysis is equivalent to a least-squares straight line fit. We consider the effects of bilayers which are asymmetric with respect to the thickness of the CdTe and CdSe parts. We thus learn that the bending can be subdivided into four kinds depending on the compressive/tensile nature of each outer plane of the sheet. We use this approach to directly compare our findings with experimental results on the bending of CdTe/CdSe rods. To reduce the effects of the lattice mismatch we explore diffuse interfaces, where we mix (i.e. alloy) Te and Se, and estimate the strain response.

36 MATERIALS SCIENCE↗