Search NASA⌕ Search

SEARCH · Search NASA

Results for “data logging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

NANT site - Doppler Lidar / Derived Data

This dataset contains daily csv files summarizing data from 10-min wind statistics from ground-based Doppler lidar at the NANT site for the WFIP3 event log. See https://a2e.energy.gov/ds/wfip3/nant.lidar.10min.z01.c1/summary

17 WIND ENERGY↗

The spectral energy distributions of Fermi blazars

In this paper, multiwavelength data are compiled for a sample of 1425 Fermi blazars to calculate their spectral energy distributions (SEDs). A parabolic function, log(νF{sub ν})=P{sub 1}(logν−P{sub 2}){sup 2}+P{sub 3}, is used for SED fitting. Synchrotron peak frequency (logν{sub p}), spectral curvature (P{sub 1}), peak flux (ν{sub p}F{sub ν{sub p}}), and integrated flux (νF{sub ν}) are successfully obtained for 1392 blazars (461 flat-spectrum radio quasars [FSRQs], 620 BL Lacs [BLs], and 311 blazars of uncertain type [BCUs]; 999 sources have known redshifts). Monochromatic luminosity at radio 1.4 GHz, optical R band, X-ray at 1 keV and γ-ray at 1 GeV, peak luminosity, integrated luminosity, and effective spectral indices of radio to optical (α{sub RO}) and optical to X-ray (α{sub OX}) are calculated. The “Bayesian classification” is employed to log ν{sub p} in the rest frame for 999 blazars with available redshift, and the results show that three components are enough to fit the log ν{sub p} distribution; there is no ultra-high peaked subclass. Based on the three components, the subclasses of blazars using the acronyms of Abdo et al. are classified, and some mutual correlations are also studied. Conclusions are finally drawn as follows: (1) SEDs are successfully obtained for 1392 blazars. The fitted peak frequencies are compared with common sources from available samples. (2) Blazars are classified as low synchrotron peak sources if log ν{sub p}(Hz)⩽14.0, intermediate synchrotron peak sources if 14.0< log ν{sub p}(Hz)⩽15.3, and high synchrotron peak sources if log ν{sub p}(Hz)>15.3. (3) Gamma-ray emissions are strongly correlated with radio emissions. Gamma-ray luminosity is also correlated with synchrotron peak luminosity and integrated luminosity. (4) There is an anticorrelation between peak frequency and peak luminosity within the whole blazar sample. However, there is a marginally positive correlation for high synchrotron peak BL Lacs (HBLs), and no correlations for FSRQs or low synchrotron peak BL Lacs (LBLs). (5) There are anticorrelations between the monochromatic luminosities (γ-ray and radio bands) and the peak frequency within the whole sample and BL Lacs. (6) The optical to X-ray (α{sub OX}) and radio to optical (α{sub RO}) spectral indices are strongly anticorrelated with peak frequency (log ν{sub p}) within the whole sample, but the correlations for subclasses of FSRQs, LBLs, and HBLs are different.

79 ASTRONOMY AND ASTROPHYSICS↗

The high-excitation planetary nebulae: NGC 3918 and IC 2448

International Ultraviolet Exploration observations of NGC 3918 and IC 2448 are presented. Combining these observations with data in the optical range and computed model structure, the chemical composition for these objects is derived. For NGC 3918 log C = -3.02, log N = -3.61 and log 0 = -3.22; while for IC 2448 log C = -3.44, log N = -81 and log 0 = 3.54.

Torres-Peimbert, S.↗

Instantaneous velocity profile measurements in a turbulent boundary layer

Instantaneous wall shear stress and streamwise velocities have been measured simultaneously in a flat-plate, turbulent boundary layer at moderate Reynolds number in an effort to provide experimental support for large eddy simulations. Data were obtained using a buried-wire, wall shear gage and a hot-wire rake positioned in the log region of the flow. Fluctuations of the instantaneous U(+) versus Y(+) profiles about a mean law of the wall are shown to be significant and complex. Peak cross-correlation values between wall shear stress and the velocities are high, and reflect the passage of a large structure inclined at a small angle to the wall. Estimates of this angle are consistent with those made by other investigators. Conditional sampling techniques were used to detect the passage of various sizes and types of flow disturbances (events), and to estimate their mean frequency of occurrence. Events characterized by large aand sudden streamwise accelerations were found to be highly coherent throughout the log region and were strongly correlated with large fluctuations in wall shear stress. Phase randomness between the near-wall quantities and the outer velocities was small. The results suggest that the flow events detected by conditional sampling applied to velocities in the log region may be related to the bursting process.

Robinson, S. K.↗

The IUE data bank: Statistics and future aspects

The data exchange policy between Goddard Space Flight Center and ESA's Villafranca (Spain) station is described. The IUE data banks and their uses are outlined. Statistical information on objects observed, the quantity of data distributed and retrieved from the archives, together with a detailed design of the final format of the IUE merged log are also given.

Schmitz, Marion↗

A Massive X-ray Outflow From The Quasar PDS 456

We report on XMM-Newton spectroscopic observations of the luminous, radio-quiet quasar PDS 456. The hard X-ray spectrum of PDS 456 shows a deep absorption trough (constituting 50% of the continuum) at energies above 7 keV in the quasar rest frame, which can be attributed to a series of blue-shifted K-shell absorption edges due to highly ionized iron. The higher resolution soft X-ray grating RGS spectrum exhibits a broad absorption line feature near 1 keV, which can be modeled by a blend of L-shell transitions from highly ionized iron (Fe XVII - XXIV). An extreme outflow velocity of approx. 50000 km/s is required to model the K and L shell iron absorption present in the XMM-Newton data. Overall, a large column density (N(sub H) = 5 x 10(exp 23)/sq cm) of highly ionized gas (log xi = 2.5) is required in PDS 456. A large mass outflow rate of approx. 10 solar mass/year (assuming a conservative outflow covering factor of 0.1 steradian) is derived, which is of the same order as the overall mass accretion rate in PDS 456. This represents a substantial fraction (approx. 10%) of the quasar energy budget, whilst the large column and outflow velocity place PDS 456 towards the extreme end of the broad absorption line quasar population.

Reeves, J. N.↗

Sptrace

Sptrace is a general-purpose space utilization tracing system that is conceptually similar to the commercial Purify product used to detect leaks and other memory usage errors. It is designed to monitor space utilization in any sort of heap, i.e., a region of data storage on some device (nominally memory; possibly shared and possibly persistent) with a flat address space. This software can trace usage of shared and/or non-volatile storage in addition to private RAM (random access memory). Sptrace is implemented as a set of C function calls that are invoked from within the software that is being examined. The function calls fall into two broad classes: (1) functions that are embedded within the heap management software [e.g., JPL's SDR (Simple Data Recorder) and PSM (Personal Space Management) systems] to enable heap usage analysis by populating a virtual time-sequenced log of usage activity, and (2) reporting functions that are embedded within the application program whose behavior is suspect. For ease of use, these functions may be wrapped privately inside public functions offered by the heap management software. Sptrace can be used for VxWorks or RTEMS realtime systems as easily as for Linux or OS/X systems.

Burleigh, Scott C.↗

Universal Scaling Laws for Solar and Stellar Atmospheric Heating: Catalog of Power-law Index between Solar Activity Proxies and Various Spectral Irradiances

The formation of extremely hot outer atmospheres is one of the most prominent manifestations of magnetic activity common to late-type dwarf stars, including the Sun. It is widely believed that these atmospheric layers, the corona, transition region, and chromosphere, are heated by the dissipation of energy transported upwards from the stellar surface by the magnetic field. This is signified by the spectral line fluxes at various wavelengths, scaled with power-law relationships against the surface magnetic flux over a wide range of formation temperatures, which are universal to the Sun and Sunlike stars of different ages and activity levels. This study describes a catalog of power-law indices between solar activity proxies and various spectral line fluxes. Compared to previous studies, we expanded the number of proxies, which now includes the total magnetic flux, total sunspot number, total sunspot area, and the F10.7 cm radio flux, and further enhanced the number of spectral lines by a factor of 2. This provides the data to study in detail the flux–flux scaling laws from the regions specified by the temperatures of the corona (log(T/K) = 6–7) to those of the chromosphere (log(T/K) ∼ 4), as well as the reconstruction of various spectral line fluxes of the Sun in the past, F-, G-, and K-type dwarfs, and the modeled stars.

Stellar coronae↗

Comparison of U.S. and Russian Slow Crack Growth Data and Models

Both the US and Russian space programs use similar predictive models for design of fused silica windows on the International space station. The Russian model can be derived from the power expression for slow crack growth (SCG) or “static fatigue.” The US uses both power and exponential models. Despite the similarity of models and data fitting approach (linear regression and right censoring), different SCG parameters have been derived by US and Russian parties for the same material (Russian fused silica) tested in a similar manner. The difference appears to be related to the use of short-term strength data along with the longer-term static fatigue data, with the power law parameter n being very sensitive to the conversion of strength data into equivalent static data. This hybrid approach is feasible if strength data is measured with a constant stress rate and is appropriately converted to a static equivalent. More research into the approach is needed. However, because of the nonlinear behavior of fused silica in log(v) – log(K(I) ) space and the sensitivity of parameter estimation to fit range, the exponential model is a better choice regardless of test method. Functions are given to convert parameters from the Russian model to those in the US model. However, accurate conversion is hampered by the lack of inert strength data. When the same test technique is used, US and Russian materials exhibit very similar parameters.

Silica, strength, impact, crack growth, windows, I↗

Solubility of U(VI) in chloride solutions. II. The stable oxides/hydroxides in alkaline KCl solutions: Thermodynamic description and relevance in cementitious systems

In this study, the solubility of U(VI) is investigated from undersaturation conditions in 0.1, 0.51, 1.03, 3.31 and 4.58 m KCl–KOH solutions at pHm = 7.5–14.6 (with pH m = –log [H + ] in molal units). All experiments were performed under Ar atmosphere at T = (22 ± 2)°C. XRD, quantitative chemical analysis, SEM–EDS and TG–DTA confirm that K 2 U 2 O 7 ·1.5H 2 O(cr) is the solid phase controlling the solubility in all evaluated systems at pH m ≥ 9.5. Below this pH m and with decreasing KCl concentration, the formation of sub-stoichiometric phases with K:U < 1 is indicated by XRD and solubility data. The concentration of uranium in equilibrium with K 2 U 2 O 7 ·1.5H 2 O(cr) shows a pH-independent behaviour up to pH m ≈ 11 regardless of ionic strength, whereas an increase of the solubility with a well–defined slope of +1 (log [U] vs. pH m ) is observed at pH m ≥11. These results are consistent with the predominance of UO 2 (OH) 3 – and UO 2 (OH) 4 2- species as previously reported in the literature. The combination of solubility data obtained in the present study with K 2 U 2 O 7 ·1.5H 2 O(cr) and the U(VI) hydrolysis scheme reported in Altmaier et al. (2017) yields a solubility product of log *K° s ,0{0.5K 2 U 2 O 7 ·1.5H 2 O(cr)} = (12.0 ± 0.2). SIT ion interaction coefficients for UO 2 (OH) 3 – and UO 2 (OH) 4 2- with K + are derived based on the newly generated experimental data in dilute to concentrated KCl systems and analogy with NaCl systems. This work extends the thermodynamic database available for U(VI) and allows more accurate source term calculations in the context of nuclear waste disposal under boundary conditions where significant K concentrations may be present and redox conditions lie in the stability field of U(VI). Finally, the K 2 U 2 O 7 ·1.5H 2 O(cr) solid phase can be considered to control the solubility of U(VI) in the degradation phase I of cement and cementitious materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Orion OB1 association. 1: Stellar content

Walfraven photometry of established and probable members of the Orion OB1 association is presented. Effective temperature, surface gravity, luminosity and mass are derived for all stars, using atmosphere model by Kurucz (1979). Absolute magnitudes are calculated using the Straizys and Kuriliene (1981) tables. Distance moduli and visual extinctions are determined. A comparison of the visual extinctions to IRAS 100 micrometers data shows that the near edge of the Orion A and B clouds lies at a distance of approximately 320 pc, while the far edge is at approximately 500 pc. A method for deriving the ages of the subgroups by comparing theoretical isochrones to the observations in the log g, log T(sub eff) plane is presented. The derived ages suggest, contrary to earlier studies, that subgroup 1b is younger than 1c, which can possibly be explained by past geometries of the system of stars and gas. The initial mass function for Orion OB1 is derived with the aid of the Kolmogorov-Smirnoff test. Through extensive simulations, we show that it is very difficult to derive accurately the Initial Mass Function (IMF) from the available data. To within somewhat weak limits the IMF is found to be of the form xi(log M) = AM(exp -1.7 +/- 0.2) for all subgroups. The energy output of the subgroups in the form of stellar winds and supernovae is calculated and compared to the observed size and expansion velocity of the Orion-Eridanus bubble. It is shown that the energy output of the association can account for the morphology and kinematics of the interstellar medium (ISM).

Brown, A. G. A.↗

THE RADIO AND OPTICAL LUMINOSITY EVOLUTION OF QUASARS. II. THE SDSS SAMPLE

We determine the radio and optical luminosity evolutions and the true distribution of the radio-loudness parameter R, defined as the ratio of the radio to optical luminosity, for a set of more than 5000 quasars combining Sloan Digital Sky Survey optical and Faint Images of the Radio Sky at Twenty cm (FIRST) radio data. We apply the method of Efron and Petrosian to access the intrinsic distribution parameters, taking into account the truncations and correlations inherent in the data. We find that the population exhibits strong positive evolution with redshift in both wavebands, with somewhat greater radio evolution than optical. With the luminosity evolutions accounted for, we determine the density evolutions and local radio and optical luminosity functions. The intrinsic distribution of the radio-loudness parameter R is found to be quite different from the observed one and is smooth with no evidence of a bimodality in radio loudness for log R {>=} -1. The results we find are in general agreement with the previous analysis of Singal et al., which used POSS-I optical and FIRST radio data.

79 ASTRONOMY AND ASTROPHYSICS↗

Methane Hydrate Field Program. Development of a Scientific Plan for a Methane Hydrate-Focused Marine Drilling, Logging and Coring Program

This topical report represents a pathway toward better understanding of the impact of marine methane hydrates on safety and seafloor stability and future collection of data that can be used by scientists, engineers, managers and planners to study climate change and to assess the feasibility of marine methane hydrate as a potential future energy resource. Our understanding of the occurrence, distribution and characteristics of marine methane hydrates is incomplete; therefore, research must continue to expand if methane hydrates are to be used as a future energy source. Exploring basins with methane hydrates has been occurring for over 30 years, but these efforts have been episodic in nature. To further our understanding, these efforts must be more regular and employ new techniques to capture more data. This plan identifies incomplete areas of methane hydrate research and offers solutions by systematically reviewing known methane hydrate “Science Challenges” and linking them with “Technical Challenges” and potential field program locations.

58 GEOSCIENCES↗

Statistical Characterization of School Bus Drive Cycles Collected via Onboard Logging Systems

In an effort to characterize the dynamics typical of school bus operation, National Renewable Energy Laboratory (NREL) researchers set out to gather in-use duty cycle data from school bus fleets operating across the country. Employing a combination of Isaac Instruments GPS/CAN data loggers in conjunction with existing onboard telemetric systems resulted in the capture of operating information for more than 200 individual vehicles in three geographically unique domestic locations. In total, over 1,500 individual operational route shifts from Washington, New York, and Colorado were collected. Upon completing the collection of in-use field data using either NREL-installed data acquisition devices or existing onboard telemetry systems, large-scale duty-cycle statistical analyses were performed to examine underlying vehicle dynamics trends within the data and to explore vehicle operation variations between fleet locations. Based on the results of these analyses, high, low, and average vehicle dynamics requirements were determined, resulting in the selection of representative standard chassis dynamometer test cycles for each condition. In this paper, the methodology and accompanying results of the large-scale duty-cycle statistical analysis are presented, including graphical and tabular representations of a number of relationships between key duty-cycle metrics observed within the larger data set. In addition to presenting the results of this analysis, conclusions are drawn and presented regarding potential applications of advanced vehicle technology as it relates specifically to school buses.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Optimization of Parametric Constants for Creep-Rupture Data by Means of Least Squares

An objective method utilizing least squares is presented for the determination of the optimum parametric constants for stress-rupture data. The method is applied to both isostress and isothermal data for the parameters proposed by Larson and Miller, Manson and Haferd, and by Dorn. Several examples are treated in detail, and it was found that the method gives good results. It is shown that the values of the constants for the parameter proposed by Manson and Haferd are not critical as long as Ta and log ta appear in the proper combination. In addition to optimization, the chief utility of the method lies in the fact that it gives the same results for a given set of data no matter who makes the analysis, which is not the case for the graphical methods presently employed.

Manson, S. S.↗

Use of a New Analytical Model To Match Production Data and Identify Opportunities To Maximize Well Productivity in the Tuscaloosa Marine Shale Reservoir

The low productivity of the oil wells in the Tuscaloosa Marine Shale (TMS) Trend, located in Louisiana and Mississippi, is a mystery. Production data from 55 wells in the TMS Trend were analyzed to identify possible means of enhancing well productivity. The -1/2 slope in a log–log plot for reservoir linear flow (RLF) was observed for some wells, but not all, and the -1 slope for boundary–dominated flow (BDF) has not been seen in the past 5 years of production. The behavior of the TMS wells is attributed to the ultralow permeability of the TMS matrix and the decline of fracture conductivity, both of which delay the BDF. On the basis of the concept of the distance of investigation, derived from the radius–of–investigation concept, the matrix permeability of the seven TMS wells was estimated to be between 34 and 65 nd, with an average of 51 nd. A new mathematical model for production decline of multifractured horizontal wells was developed taking into consideration the time–dependent fracture conductivity during the BDF period. This model fits TMS–well production data, with an average error of 6.12% and an R2 value of 0.96. Assuming constant matrix permeability, fitting the new model to the production data in the BDF period gives a rate of fracture–conductivity decline of between 0.20 and 0.74% per month. The new mathematical model reveals opportunities to optimize well completion to enhance well productivity in the TMS Trend. For a given amount of fracture proppant allocated to a well, the shortest possible fracture spacing should be used to maximize well productivity. If the number of fractures is fixed as a constraint of well completion design, well productivity is inversely proportional to the square root of fracture spacing (i.e., if the fracture spacing is shortened by fourfold, well productivity is expected to double). If the horizontal wellbore length is fixed as a constraint of well completion, well productivity is inversely proportional to fracture spacing (i.e., if the fracture spacing is shortened by 50%, well productivity is expected to double).

Engineering↗

Combinatorial Evaluation of Physical Feature Engineering, Classical Machine Learning, and Deep Learning Models for Synchrophasor Data at Scale

A major objective of the project was to train and evaluate the effectiveness of multiple event and anomaly detection, identification and classification deep temporal learning models for processing of real-time phasor measurement unit (PMU) data streams. A vast dataset, consisting of two years of phasor measurements from all three U.S. Interconnections, was curated and released by the Department of Energy (DOE) through Pacific Northwest National Laboratory (PNNL). The dataset also included an event log that provided event times and types (e.g. generator trips, line trips, planned service events, transformer operations, etc.). Our analysis of this dataset addressed six (6) of the eleven (11) research priorities identified in Funding Opportunity Announcement (FOA) DE-FOA-0001861 “Big Data Analysis of Synchrophasor Data” (FOA 1861). Rather than being limited to pre-determined specific algorithms, this project relied on the uniquely structured, highly performant underlying time series database capabilities of the PredictiveGrid platform to assess the vast dataset utilizing a wide variety of algorithms.

24 POWER TRANSMISSION AND DISTRIBUTION↗