Search NASA⌕ Search

SEARCH · Search NASA

Results for “data reporting formats”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

MODELING THE IMPACT OF ELEVATED MERCURY IN DEFENSE WASTE PROCESSING FACILITY MELTER FEED ON THE MELTER OFF-GAS SYSTEM-PRELIMINARY REPORT

The Defense Waste Processing Facility (DWPF) is currently evaluating an alternative Chemical Process Cell (CPC) flowsheet to increase throughput. It includes removal of the steam-stripping step, which would significantly reduce the CPC processing time and lessen the sampling needs. However, its downside would be to send 100% of the mercury that comes in with the sludge straight to the melter. For example, the new mercury content in the Sludge Batch 5 (SB5) melter feed is projected to be 25 times higher than that in the SB4 with nominal steam stripping of mercury. This task was initiated to study the impact of the worst-case scenario of zero-mercury-removal in the CPC on the DWPF melter offgas system. It is stressed that this study is intended to be scoping in nature, so the results presented in this report are preliminary. In order to study the impact of elevated mercury levels in the feed, it is necessary to be able to predict how mercury would speciate in the melter exhaust under varying melter operating conditions. A homogeneous gas-phase oxidation model of mercury by chloride was developed to do just that. The model contains two critical parameters pertaining to the partitioning of chloride among HCl, Cl, Cl{sub 2}, and chloride salts in the melter vapor space. The values for these parameters were determined at two different melter vapor space temperatures by matching the calculated molar ratio of HgCl (or Hg{sub 2}Cl{sub 2}) to HgCl{sub 2} with those measured during the Experimental-Scale Ceramic Melter (ESCM) tests run at the Pacific Northwest National Laboratory (PNNL). The calibrated model was then applied to the SB5 simulant used in the earlier flowsheet study with an assumed mercury stripping efficiency of zero; the molar ratio of Cl-to-Hg in the resulting melter feed was only 0.4, compared to 12 for the ESCM feeds. The results of the model run at the indicated melter vapor space temperature of 650 C (TI4085D) showed that due to excessive shortage of chloride, only 6% of the mercury fed is expected to get oxidized, mostly as HgCl, while the remaining mercury would exist either as elemental mercury vapor (90%) or HgO (4%). Noting that the measured chloride level in the SB5 qualification sample was an order of magnitude lower than that used in the SB5 simulant, the degree of chloride shortage will be even greater. As a result, the projected level of HgCl in the actual SB5 melter exhaust will be even lower than 6% of the total mercury fed, while that of elemental mercury is likely to be greater than 90%. The homogeneous oxidation of mercury in the off-gas was deemed to be of primary importance based on the postulation that mercury and other volatile salts form submicron sized aerosols upon condensation and thus remain largely in the gas stream downstream of the quencher where they can deposit in the off-gas lines, Steam-Atomized Scrubbers (SAS), and High-Efficiency Mist Eliminator (HEME). Formation of these submicron semi-volatile salts in the condensate liquid is considered to be unlikely, so the liquid phase reactions were considered to be less important. However, subsequent oxidation of mercury in the liquid phase in the off-gas system was examined in a simplified model of the off-gas condensate. It was found that the condensate chemistry was consistent with further oxidation of elemental mercury to Hg{sub 2}Cl{sub 2} and conversion of HgO to chlorides. The results were consistent with the available experimental data. It should also be noted that the model predictions presented in this report do not include any physically entrained solids, which typically account for much of the off-gas carryover on a mass basis. The high elemental mercury vapor content predicted at the DWPF Quencher inlet means that physically entrained solids could provide the necessary surface onto which elemental mercury vapor could condense, thereby coating the solids as well as the internal surfaces of the off-gas system with mercury. Clearly, there are many process benefits to be gained by removing the steam-stripping step from the CPC cycle. The goal of this task was to study what adverse impact the zero-mercury-removal scenario would have on the DWPF melter off-gas system operation. It is stressed again that this study was intended to be scoping in nature, so the results presented in this report are preliminary. Any further substantiation of these results for actual implementation into the DWPF flowsheet would require an in-depth modeling study of all three reaction zones, including the aqueous-phase reactions in the quencher, OGCT, Steam Atomized Scrubber (SAS), and off-gas condenser with recirculated condensate, and the proof-of-principle experiments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of a BlueCRAB/MELCOR Framework for Supporting Realistic Mechanistic Source Term Calculations in Microreactors

Efforts are currently underway to deploy microreactor modeling and simulation tools to better support vendors and regulatory authorities in submitting and reviewing licensing applications. In particular, the Nuclear Regulatory Commission is expected to rely on the Comprehensive Reactor Analysis Bundle (BlueCRAB) multiphysics toolset in performing design- and beyond-design-basis accident analyses. In addition, the Nuclear Regulatory Commission has been using the MELCOR code to estimate mechanistic source terms during accidents. As MELCOR relies on isotopic inventory and reactor temperature/power evolution profiles during accident conditions—all of which can theoretically be obtained from BlueCRAB—the ultimate goal of this activity is to establish a common BlueCRAB-MELCOR framework. However, prior to the present research, BlueCRAB had never been used to calculate such quantities of interest at the full-core level. While there are many Monte Carlo (MC) codes capable of computing such quantities of interest, they are unable to readily account for multiphysics feedback. BlueCRAB allows for the coupling of different physics codes together to perform multiphysics-informed calculations. Therefore, the purpose of this fiscal year 2023 work is to investigate the feasibility and challenges of performing such calculations within BlueCRAB so as to generate the data that MELCOR relies on. To demonstrate the methodology, the proposed workflow was applied to a prototypical heat pipe-cooled microreactor model. To predict isotopic concentrations (taking into account the ac- cumulation of fission products during operation), the necessary microscopic cross sections were generated via OpenMC and tabulated with respect to temperature and burnup. Next, a recently developed capability in Griffin (the reactor physics application in BlueCRAB) was used to convert the OpenMC output format into the ISOXML format used by Griffin. A multiphysics microscopic depletion calculation that involved performing a coupled full-core, heterogeneous neutron trans- port and thermal calculation at each depletion step was conducted to deplete the core to end of life (EOL) conditions so as to provide both isotopics and the initial condition for the transient calculation. Following a brief null-transient to verify that the initial condition had been properly restarted and was indeed in thermal equilibrium, a heat pipe failure transient was simulated. Thus, the entire workflow of using BlueCRAB to generate MELCOR inputs, from cross-section generation to producing isotopic inventory and power/temperature evolution profiles during transients, is demonstrated. This report also details the identified gaps in the workflow and how they were (for the most part) addressed. Future work should focus on directly including MEL- COR into the workflow by performing a MELCOR calculation using the BlueCRAB-generated input data. In addition, the heat pipe reactor design should be improved so as to reflect more prototypical burnup characteristics at EOL.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Final Technical Report

We have made significant progress in our proposed work on studying abrupt changes during the Holocene with NCAR-CCSM3 during the term of this project. In addition, in anticipation of the next phase of study, we have spent time on the abrupt changes since the last glacial maximum. First, we have performed further model-data comparison based on our baseline TraCE-21 simulation and made important progress towards the understanding of several major climate transitions. Second, we have made a significant effort in processing the model output of TraCE 21 and have put this output on the NCAR Earth System Grid in single variable format analogous to the CMIP5 protocols for easy access by the community [https://www.earthsystemgrid.org/project/trace.html]. Third, we have completed many additional sensitivity experiments. In addition, we have organized synthesis workshops to facilitate and promote transient model-data comparison for the international community. Finally, we have identified new areas of interest for Holocene climate changes.

54 ENVIRONMENTAL SCIENCES↗

Step Catalysis to Synthesize Fossil-Free Ammonia at Atmospheric Pressure (Final Technical Report)

Affordable fossil-free ammonia synthesis will enable high-yield sustainable crop production for a growing world population while preserving the planet and making the best use of water and land. Simple technology amenable to intermittent operation using renewable energy will be made available through step catalysis activating dinitrogen at atmospheric pressure by nitride formation. Project objectives: (1) At the single particle level, quantify and analyze N2 activation by doped or alloyed manganese macroscopic- and nano particles at atmospheric pressure, (2) Quantify and analyze ammonia synthesis from doped or alloyed metal nitride particles when contacting them with hydrogen at atmospheric pressure, and (3) Integrate experimental data and atomic-level computational models to predict the behavior of metal alloys in nitrogen activation and subsequent ammonia synthesis.

10 SYNTHETIC FUELS↗

Use of Very High-Resolution Optical Data for Landslide Mapping and Susceptibility Analysis Along the Karnali Highway, Nepal

The Karnali highway is a vital transport link and the only primary roadway that connects the remote Karnali region to the lowlands in Mid-Western Nepal. Every year there are reports of landslides blocking the road, making this area largely inaccessible. However, little effort has focused on systematically identifying landslides and landslide-prone areas along this highway. In this study, landslides were mapped with an object-based approach from very high-resolution optical satellite imagery obtained by the DigitalGlobe constellation in 2012 and PlanetScope in 2018. Landslides ranging from 10 to 30,496 sq.m were detected within a 3 km buffer along the highway. Most of the landslides were located at lower elevations (between 500–1500 m) and on steep south-facing slopes. Landslides tended to cluster closer to the highway, near drainage channels and away from faults. Landslides were also most prevalent within the Kuncha Formation geologic class, and the forested and agricultural land cover classes. A susceptibility map was then created using a logistic regression methodology to highlight patterns in landslide activity. The landslide susceptibility map showed a good prediction rate with an area under the curve (AUC) of 0.90. A total of 33% of the study arealies in high/very high susceptibility zones. The map highlighted the lower elevated areas between Bangesimal and Manma towns with the Kuncha Formation geologic class as being the most hazardous. The banks of the Karnali River, its tributaries and areas near the highway were also highly susceptible to landslides. The results highlight the potential of very high-resolution optical imagery for documenting detailed spatial information on landslide occurrence, which enables susceptibility assessment in remote and data scarce regions such as the Karnali highway.

Pukar Amatya↗

Sieving Hydrogen Isotopes via Machine Learning Assisted Chemical Vapor Deposition (CVD) of High‐Quality Monolayer Hexagonal Boron Nitride (h‐BN) on Iron Foils

Atomically thin two-dimensional (2D) ceramics, such as monolayer hexagonal boron nitride (h-BN), present potential for disruptive advances in separations. However, sub-atomic scale separation of hydrogen isotopes (H + /D + ) require near pristine 2D material membranes, and scalable synthesis of such high-quality h-BN comparable to mechanically exfoliated crystals remains a significant challenge. Here, we report a scalable Fe-catalyzed chemical vapor deposition (CVD) process for bottom-up synthesis of large-area, high-quality monolayer h-BN films, overcoming key limitations of conventional ammonia-based routes. By leveraging mechanistic insights and higher CVD temperatures, we suppress multilayer formation and achieve uniform monolayer h-BN coverage on commercially available Fe foils. Machine learning enables systematic exploration of the complex, multi-dimensional CVD parameter space (growth time, temperature, precursor temperature, multilayer faction, coverage), providing data-driven approaches to visualize and identify process regimes facilitating predominantly monolayer h-BN growth with minimal secondary nuclei/ad-layers. The optimized Fe-catalyzed CVD h-BN membranes show high-quality as observed by proton/deuteron (H + /D + ) selectivity ≈8.45, approaching the highest quality benchmark of mechanically exfoliated h-BN (H + /D + selectivity ≈10) as well as significantly outperforming Cu-catalyzed CVD h-BN membranes (H + /D + selectivity ≈3.62, control selectivity ≈1.7). Our work provides a scalable cost-effective route for high-quality monolayer h-BN synthesis for sub-atomic scale separations (H + /D + ) and demonstrates the broader potential of machine learning-guided optimization of CVD for advancing synthesis of 2D materials.

36 MATERIALS SCIENCE↗

CALPHAD Uncertainty Quantification and TDBX

CALPHAD uncertainty quantification (UQ) is the foundation of materials design with quantified confidence. We report a framework and software packages to enable CALPHAD UQ assessment and calculation using commercial CALPHAD software (Thermo-Calc). This Bayesian inference framework is coupled with a Markov chain Monte Carlo algorithm to establish uncertainty traces with a given thermodynamic database file (TDB) and corresponding experimental data points. This general framework is demonstrated with the Ni–Cr binary system. The algorithm is firstly validated on synthetic data with known ground truth. Then it is applied to real experimental data to generate posterior traces. We develop a file format named TDBX, which provides a single source of truth by combining the original TDB content and the traces for each assessed Gibbs energy parameter. CALPHAD UQ calculations are performed based on the TDBX file, from which uncertainties for phase boundaries, enthalpy curves, and solidification range are collected as examples of basic design parameters. This TDBX file with corresponding scripts are made open-source. Finally, the combination of CALPHAD UQ assessments and calculations connected by TDBX supports uncertainty-assisted modeling, enabling the integrated application of modern design with uncertainty methodologies to computational materials design.

36 MATERIALS SCIENCE↗

Ultrasound-based formation of nano-Pickering emulsions investigated via in-situ SAXS

We report that sonication is one of the most commonly used methods to synthesize Pickering emulsions. Yet, the process of emulsion sonication is rarely characterized in detail and acoustic conditions are largely determined by experimenter's personal experience. In this study, the role of sonication in the formation of Pickering emulsions from amphiphilic gold nanoparticles was investigated using a new sample environment combining ultrasound delivery with ultra-small-angle X-ray scattering (USAXS) measurements. The detection of acoustic cavitation and the simultaneous analysis of structural data via USAXS demonstrated direct correlation between Pickering emulsion formation and cavitation events. There was no evidence of spontaneous adsorption of particles onto the oil-water interface without ultrasound, which suggests the presence of a stabilizing force. Acoustically detected cavitation events could originate in the bulk solvent and/or inside the emulsion droplets. Lastly, these events helped overcome energy barriers to induce particle adsorption.

36 MATERIALS SCIENCE↗

Potential of Zero Charge and Its Temperature Derivative for Au(111) Electrode|Alkanethiol SAM|1.0 M Aqueous Electrolyte Solution Interfaces: Impact of Electrolyte Solution Ionic Strength and Its Effect on the Structure of the Modified Electrode|Electrolyte Solution Interface

In this study, we demonstrate how small and rapid temperature perturbations (produced by the indirect laser-induced temperature jump (ILIT) technique) of solid metal electrode|electrolyte solution interfaces may be used to determine the potential of zero (total) charge (E pzc ) and its temperature derivative $$\left(\frac{dEpzc}{dT}\right)$$ of Au(111) electrode surfaces modified by alkanethiol self-assembled monolayers in contact with high ionic strength (i.e., 1.0 M) aqueous electrolyte solutions. The E pzc ’s measured for two different types of SAMs (made from either HS(CH 2 ) n-1 CH 3 (5 ≤ n ≤ 12, E pzc = -(0.99 ± 0.12) V vs SSCE) or HS(CH 2 ) n OH (3 ≤ n ≤ 16, E pzc = (0.46 ± 0.22) V vs SSCE)) are considerably different than those measured previously at much lower electrolyte solution ionic strengths. For mixed monolayers made from both HS(CH 2 ) n-1 CH 3 and HS(CH 2 ) n Fc (where Fc refers to ferrocene), the difference in Epzc decreases as a function of the surface concentration of the Fc moiety (i.e., [Fc]), and it completely disappears at a surprisingly small [Fc] (~4.0 × 10 –11 mol cm –2 ). These observations for the Au(111)|hydrophobic (neat and mixed) SAM|aqueous electrolyte solution interfaces, along with the surface potentials (g S ml(dip)) evaluated for the contacting electrolyte solution surfaces of these interfaces, are consistent with a structure for the water molecule components of these surfaces where there is a net orientation of the dipoles of these molecules. Accordingly, the negative (oxygen) ends of these molecules point toward the SAM surface. The positive values of g S ml(dip) evaluated for hydrophilic SAM (e.g., made from HS(CH 2 ) n OH)|aqueous electrolyte solution interfaces) also indicate that the structure of these interfaces is similar to that of the hydrophobic interfaces. However, g S ml(dip) decreases with increasing ionic strength for the hydrophilic interfaces, while it increases with increasing ionic strength for the hydrophobic interfaces. The data (and calculations) reported in the present work and other studies of hydrophobic (and hydrophilic)|aqueous solution interfaces are as yet insufficient to support a complete explanation for the effects of ionic strength observed in the present study. Nevertheless, an analysis based upon the value of $$\left(\frac{dEpzc}{dT}\right)$$ (= (0.51 ± 0.12) mV/K, essentially the same for SAMs made from both HS(CH 2 ) n-1 CH 3 and HS(CH 2 ) n OH), determined in the present study provides a further indication that upon formation of the SAM there is a partial charge transfer of electrons from the relevant gold atoms on the Au(111) surface to the sulfur atoms of the alkanethiols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

15-minute Parker River gap-filled tide height and salinity data, PIE LTER, Plum Island Sound, MA (2014–2023), for ELM PFLOTRAN modeling

This dataset contains 15-minute tide height and salinity data from the Typha site along the Parker River, part of the Plum Island Ecosystems Long Term Ecological Research (PIE LTER) site in Plum Island Sound, Massachusetts (MA) 2014-2023. Tide height (in NAVD88) was compiled from measurements conducted at the mouth of Plum Island Sound and corrected for time lags. Gap-filling of missing periods were done by fitting tidal constituents to the time series. Salinity was measured (and is stored on ESS DIVE ) in 2022 and 2023 using HOBO U24-002 conductivity loggers. River discharge is the most important control on tidal river water salinity at the location (Vallino & Hopkinson, 1998). An artificial neural network was trained to predict river water salinity at the location using Parker River discharge (USGS station 01101000, Parker River at Byfield, MA) and gap-filled salinity observations from a long-term monitoring station ca. 3km downstream from the Typha site (LTER station ‘Middle Road’) as input variables to create continuous time series information. The data set was used in the spin up and simulations of a land surface model coupled to a biogeochemical reaction network (ELM PFLOTRAN) assessing impacts of hydrology and salinity input on methane fluxes in 2022 and 2023 (Sulman et al., 2024). Metadata files ELMPFLOTRAN_tide_salinity_dd.csv and ELMPFLOTRAN_tide_salinity_flmd.csv provide details on site location, data variables, and QA/QC methods .

54 ENVIRONMENTAL SCIENCES↗

Time-Lapse Vertical Seismic Profiling (VSP) for CO 2 Storage in a Depleted Oil Field in Northern Michigan

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. This report describes the Dover 33 VSP study to test the effectiveness of time-lapse Vertical Seismic Profile (VSP) for detecting and delineating a plume of more than 271,000 tonnes of CO2 injected into the Brown Niagaran and A-1 Carbonate formations within the Dover 33 reef between March 2013 and September 2016. Five 2D walkaway VSP (WVSP) source lines were acquired by SIGMA3 in September 2016 to investigate the possible time-lapse response in both P-wave and PS-wave seismic data. The data was compared to the same survey geometry acquired in March 2013 by SR2020. The seismic energy was recorded into an 80-level, three-component geophone array deployed into the Dover 1-33 well and placed just above the reef. P-wave and PS-wave reflection images were produced for each of the three source lines from both the 2013 baseline and 2016 monitor surveys. The images were then compared to look for changes in the reflectivity at and around the injection location that might indicate how the CO 2 has moved over this time period. This technique revealed several localized areas with sizable impedance differences inside the reef where CO 2 would be expected; however, a large number of similar impedance “hotspots” were also detected outside the reef in areas where injected CO 2 would not be expected. Therefore, a second analysis that involved calculating P-wave and S-wave travel time differences between the 2013 and 2016 VSPs was conducted to look for a change that could be caused by the CO 2 plume.

01 COAL, LIGNITE, AND PEAT↗

Micro-zoning in minerals of a Landes silicate inclusion

There is an increasing number of meteorites with chondritic bulk composition but completely different textures than the conventional chondrite groups. Winonaites, Acapulcoites and silicate inclusions in IAB-iron meteorites have in common coarse grain size, highly equilibrated mineralogy with frequent 120 deg triple junctions and they record a significantly lower degree of oxidation than ordinary chondrites. They all have equilibration temperatures, based on Ca-exchange among pyroxenes, of around 900 to 1100 deg C. However, on cooling disequilibrium features may develop: (1) Olivine in IAB-inclusions has lower Fa-content than equilibrium Fs-content of pyroxenes requires; (2) CaO-zoning in olivine was established at temperatures of around 500 deg C, several hundred degrees below pyroxene equilibration temperatures. Obviously, olivine responded faster to changes in fO2 (Fa in olivine) and temperature (Ca-zoning) than pyroxenes. Differences in diffusion coefficients can readily explain the observed trends. Here we report on much more subtle zoning features in pyroxenes. TEM-observations reveal large compositional gradients in Ca, Na, Cr, Ti and Fe within the first micrometer of cpx and opx crystals. In summary, the data reflect the complicated subsolidus history of a chondritic mineral assemblage that was in thermodynamic equilibrium at about 900 deg C and cooled slowly from this temperature whereby oxidation reactions and different closure temperatures for various minerals and elements played an important role. The oxidation of P dissolved in metal and formation of phosphate, which is thermodynamically stable at low temperatures, is suggested to be responsible for most of the observed zoning.

Eisenhour, D. D.↗

Science Education Supporting Weather Broadcasters On-Air and in the Classroom with NASA "Mini-Education Supplements"

NASA-Goddard Space Flight Center has initiated a new project designed to expand on existing news services and add value to classrooms through the development and distribution of two-minute 'mini-supplements' which give context and teach about current weather and Earth research phenomena. The innovative mini-supplements provide raw materials for weather forecasters to build news stories around NASA related missions without having to edit the more traditional and cumbersome long-form video format. The supplements cover different weather and climate topics and include NASA data, animations, video footage, and interviews with scientists. The supplements also include a curriculum package with educational lessons, educator guide, and hand-on activities. One goal is to give on-air broadcasters who are the primary science educators for the general public what they need to 'teach' about the science related to NASA research behind weather and climate news. This goal achieves increasing public literacy and assures higher accuracy and quality science reporting by the media. The other goal is to enable on-air broadcasters to serve as distributors of high quality, standards-based educational curricula and supplemental material when they visit 8-12 grade classrooms. The focus of 'pilot effort' centers around the success of NASA's Tropical Rainfall Measuring Mission (TRMM) but is likely expandable to other NASA earth or space science missions.

Shepherd, J. Marshall↗

yourSky: Custom Sky-Image Mosaics via the Internet

yourSky (http://yourSky.jpl.nasa.gov) is a computer program that supplies custom astronomical image mosaics of sky regions specified by requesters using client computers connected to the Internet. [yourSky is an upgraded version of the software reported in Software for Generating Mosaics of Astronomical Images (NPO-21121), NASA Tech Briefs, Vol. 25, No. 4 (April 2001), page 16a.] A requester no longer has to engage in the tedious process of determining what subset of images is needed, nor even to know how the images are indexed in image archives. Instead, in response to a requester s specification of the size and location of the sky area, (and optionally of the desired set and type of data, resolution, coordinate system, projection, and image format), yourSky automatically retrieves the component image data from archives totaling tens of terabytes stored on computer tape and disk drives at multiple sites and assembles the component images into a mosaic image by use of a high-performance parallel code. yourSky runs on the server computer where the mosaics are assembled. Because yourSky includes a Web-interface component, no special client software is needed: ordinary Web browser software is sufficient.

Jacob, Joseph↗

Feldspathic Meteorites MIL 090034 and 090070: Late Additions to the Lunar Crust

Our studies of the Miller Range lunar meteorites MIL 090034, 090036, and 090070 show them to be a diverse suite of rocks from the lunar highlands hereafter referred to as MIL 34, MIL 36, and MIL 70, resp. MIL34 and MIL70, the focus of this work, are crystalline melt breccias. Plagioclase compositions in both peak sharply around An96-97. Mg numbers of olivine vary from 58-65 with a few higher values. MIL36 is a regolith breccia. MIL 34 and MIL 70 have some of the highest Al2O3 abundances of lunar highland meteorites, indicating that they have among the largest modal abundances of plagioclase for lunar meteorites. They have lower Sc and Cr abundances than nearly all lunar highland meteorites except Dho 081, Dho 489 and Dho 733. MIL34 and MIL70 also have similar cosmic ray exposure (CRE) ages of approximately 1-2 Ma indicating they are launch paired. (MIL36 has a larger CRE age approximately greater than 70 Ma). Park et al. found a variation in Ar-Ar ages among subsamples of MIL 34 and MIL70, but preferred ages of 3500+/-110 Ma for the "Dark" phase of MIL 34 anorthite and 3520+/-30 Ma for the "Light" phase of MIL70. Bouvier et al. reported a Pb-Pb age of 3894+/-39 Ma for a feldspathic clast of MIL 34 and a similar age for a melt lithology. Here we reexamine the Rb-Sr and Sm-Nd isotopic data, which show complexities qualitatively consistent with those of the Ar-Ar and Pb-Pb data. The Sm-Nd data in particular suggest that the feldspathic compositions of MIL 34 and MIL 70 formed during initial lunar geochemical differentiation, and REE modeling suggests a relatively late-stage formation.

Nyquist, L. E.↗

PACE OCI Calibration and Geolocation Operational Algorithm Description

This technical report describes the software implementation of the calibration and geolocation processing algorithms for the Ocean Color Instrument (OCI) on the Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission. PACE was launched on February 8, 2024. The first Earth-viewing data were collected on February 25, and commissioning was completed on April 5. All PACE science data are acquired and processed by the Science Data Segment (SDS). The first processing stages are Level 0-to-1A and Level 1A-to-1B. The calibration and geolocation processing is performed during the latter stage. The L1B products are the inputs for geophysical retrieval processing (Level 2). This report is organized as follows. The pertinent characteristics of OCI for calibration and geolocation processing are described in Section II. Section III describes the implementation of the geolocation processing algorithms, and the calibration processing is described in Section IV. The Level 1B product format is described in Section V.

Ivona Cetinic↗

Real-Time Ice Nuclei Measurements at Oliktok Point Field Campaign Report

The ability of atmospheric particles (aerosols) to serve as heterogeneous ice nuclei (IN) for formation of ice and mixed-phase clouds is one of the least understood microphysical processes resulting in large uncertainties in climate modeling. As stated in the Intergovernmental Panel on Climate Change 2007 report, “The effects of aerosol particles on heterogeneous ice formation are currently insufficiently understood and present another level of challenge for both observations and modeling.” IN can strongly affect cloud radiative properties and precipitation formation. Only a small fraction (often less than 1%) of all aerosol particles act as atmospheric IN. Therefore, it becomes important to identify the active fraction of aerosol particles under a variety of environmental conditions. Proposed IN measurement techniques provide IN concentrations as a function of temperature and humidity conditions, and this unique data set can be analyzed to develop or constrain IN parameterizations that models rely on to calculate primary ice formation. Currently, the processes of ice formation within models are poorly represented, such that climate models often inaccurately partition cloud water between liquid and solid ice. Model studies have shown that uncertainties in cloud phase partitioning induce large uncertainties in the impact of mixedphase clouds on climate change. Arctic clouds composed of ice particles and supercooled liquid droplets at temperatures warmer than -37°C are important for the Arctic’s climate because of their extensive horizontal coverage over long periods, and their impact on the surface radiative balance and thus ice sheet coverage. The complexity of microphysical processes within these clouds and the sensitivity of precipitation to the details of microphysics are not fully understood. In addition, representation of these processes in a variety of cloud models continues to be challenging. Arctic clouds provide unique conditions to understand heterogeneous ice nucleation mechanisms, particularly immersion freezing, and will be the initial focus of the ice nucleation group. The U.S. Department of Energy Atmospheric Radiation Measurement (ARM)-North Slope of Alaska (NSA) site is well equipped with other aerosol measurement (number concentration, size) instruments, and a relationship among long-term IN measurements and aerosol physical and chemical properties under different environmental conditions can be identified and established. The long-term IN measurements will be critical for understanding the ice nucleation process in response to the seasonal variations of aerosol and developing robust ice nucleation parameterizations for cloud and climate models. In the future, IN measurements could also be made at other ARM-NSA sites, specifically, Oliktok Point.

Arctic processes (meteorology), Oliktok Point, aer↗

Digital Transformation for the Existing Fleet: Where to Start?

To remain economically viable in today’s electricity marketplace, nuclear power plants are replacing old analog equipment with modern digital tools. Having information available in an electronic format allows most work processes to become more efficient by automating simple, time-consuming tasks. However, with thousands of routine work processes performed every day, it can be difficult for the plants to know where to begin. We partnered with a nuclear utility to develop a novel assessment tool that measures seven health indicators for each work process performed, providing a rapid digital status report of the plant. The assessment tool is inexpensive and user-friendly, administered remotely, and automatically customized to each employee. Data from 167 employees representing different perspectives were analyzed to identify optimal candidates for digital initiatives that yield the highest payback for increased process efficiencies. We ranked by a priority index to ensure that processes with a good combination of time savings and digital opportunity were at the top. The focus was on determining a maximum investment to ensure that the cost savings from these initiatives are positive over a specified period. We identified potential cost savings of $2.6m, $1.3m and $1.2m for our top priority processes. By using our novel assessment tool to determine the digital status of the plant’s work processes, they were provided with a starting point for target candidates that would most benefit from a digital initiative. Our analysis helps stakeholders understand the financial impact of digital initiatives and identify maximum investment amounts when seeking technical solutions.

assessment↗