Search NASA⌕ Search

SEARCH · Search NASA

Results for “differences atmosphere.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Effect of double annealing on the critical parameters of highly textured YBa{sub 2}Cu{sub 3}O{sub 6.9}

The effect of low-temperature treatment (200 Degree-Sign C) and subsequent annealing at 930 Degree-Sign C on the critical parameters of highly textured YBa{sub 2}Cu{sub 3}O{sub 6.9} is studied. The structural defects that are formed during the low-temperature decomposition of this compound into phases with different oxygen contents and during interaction with atmospheric moisture are shown to deteriorate the superconducting properties. After annealing at T = 930 Degree-Sign C and subsequent oxidation, superconductivity is restored and the formed defects are partly retained and serve as effective pinning centers, including the case of high magnetic fields. The stresses induced by the low-temperature treatment lead to primary recrystallization at T = 930 Degree-Sign C, which results in the disappearance of texture and an isotropic state of the material in high fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radar Wind Profiler (RWP) and Radio Acoustic Sounding System (RASS) Instrument Handbook

The radar wind profiler (RWP) is an active remote-sensing instrument that can routinely, and virtually unattended, observe wind and turbulence in the troposphere through scattering from clear-air irregularities of the atmospheric refractive index (Gage and Balsley 1978). The principle of Doppler radars in general is based on sending electromagnetic pulses in the vertical and several tilted directions (vertical and oblique beams) and measuring the signal that is scattered back by atmospheric turbulence at all heights and received at the antenna. The RWPs provides measurements of backscattered signal strength and wind profiles nominally between 0.1 km and 6 km. The RWP operation assumes that the wind field is homogeneous over the spatial separation of the antenna beams, which is a safe assumption under stable atmospheric conditions. However, the wind may be different between the beams due to significant changes in the wind field, resulting in erroneous wind calculations. Therefore, the radial measurements are averaged over a sufficient time period to validate the assumption of homogeneity.

54 ENVIRONMENTAL SCIENCES↗

Aerodynamic design of the National Rotor Testbed.

A new wind turbine blade has been designed for the National Rotor Testbed (NRT) project and for future experiments at the Scaled Wind Farm Technology (SWiFT) facility with a specific focus on scaled wakes. This report shows the aerodynamic design of new blades that can produce a wake that has similitude to utility scale blades despite the difference in size and location in the atmospheric boundary layer. Dimensionless quantities circulation, induction, thrust coefficient, and tip-speed-ratio were kept equal between rotor scales in region 2 of operation. The new NRT design matched the aerodynamic quantities of the most common wind turbine in the United States, the GE 1.5sle turbine with 37c model blades. The NRT blade design is presented along with its performance subject to the winds at SWiFT. The design requirements determined by the SWiFT experimental test campaign are shown to be met.

17 WIND ENERGY↗

Toward Hybrid Physics-Machine Learning to improve Land Surface Model predictions

A critical challenge for Land Surface Models (LSMs) is to simulate processes at the surface and the subsurface and their feedbacks to the atmosphere. Even using the same climate forcings, different LSMs predict different surface fluxes and soil moisture conditions due to differences in the formulations of individual processes, parameterizations, and representation of spatial heterogeneity. Ultimately, these differences contribute to the LSM prediction errors and uncertainty. This research seeks to address this challenge by coupling physics-based modeling with state-of-the-art machine learning (ML) techniques to describe complex physical and biogeochemical processes and narrow the gap between model predictions and observations.

58 GEOSCIENCES↗

In-situ measurement of moist flue gas under high pressure using a nafion dryer and FTIR

The formation of the main flue gas species (NOx, SOx, CO2, and CO) in pressurized oxy-fuel combustion can be fundamentally different from oxy-fuel combustion at atmospheric pressure. To accurately obtain the concentration of these gas species in a pressurized oxy-fuel combustor, a gas measurement which maintains the sampling pressure is needed. Very few published studies have accomplished this, and never under the conditions reported herein. In this work, we fire PRB coal in a 100 kWth staged pressurized oxy-fuel combustor (SPOC) under a pressure 15 bara. We utilize a state-of-the-art FTIR (Thermo Scientific Nicolet iS20) with a novel high-pressure gas cell that is under process pressure to measure the in-situ flue-gas concentration in a sampled flow. However, water vapor can significantly interfere with the FTIR measurement, particularly under pressure. To address this problem, we have developed a high-pressure nafion dryer to selectively remove the water vapor from the flue gas while retaining the flue gas species. This approach can significantly increase the signal-noise ratio for the FTIR. By integrating the nafion dryer and the high-pressure gas cell, we were able to successfully measure flue gas species at system pressure with the FTIR.

Cheng, Mao↗

Synthetic ozone deposition and stomatal uptake at flux tower sites

Abstract. We develop and evaluate a method to estimate O 3 deposition and stomatal O 3 uptake across networks of eddy covariance flux tower sites where O 3 concentrations and O 3 fluxes have not been measured. The method combines standard micrometeorological flux measurements, which constrain O 3 deposition velocity and stomatal conductance, with a gridded dataset of observed surface O 3 concentrations. Measurement errors are propagated through all calculations to quantify O 3 flux uncertainties. We evaluate the method at three sites with O 3 flux measurements: Harvard Forest, Blodgett Forest, and Hyytiälä Forest. The method reproduces 83 % or more of the variability in daily stomatal uptake at these sites with modest mean bias (21 % or less). At least 95 % of daily average values agree with measurements within a factor of 2 and, according to the error analysis, the residual differences from measured O 3 fluxes are consistent with the uncertainty in the underlying measurements. The product, called synthetic O 3 flux or SynFlux, includes 43 FLUXNET sites in the United States and 60 sites in Europe, totaling 926 site years of data. This dataset, which is now public, dramatically expands the number and types of sites where O 3 fluxes can be used for ecosystem impact studies and evaluation of air quality and climate models. Across these sites, the mean stomatal conductance and O 3 deposition velocity is 0.03–1.0 cm s -1 . The stomatal O 3 flux during the growing season (typically April–September) is 0.5–11.0 nmol O 3 m -2 s -1 with a mean of 4.5 nmol O 3 m -2 s -1 and the largest fluxes generally occur where stomatal conductance is high, rather than where O 3 concentrations are high. The conductance differences across sites can be explained by atmospheric humidity, soil moisture, vegetation type, irrigation, and land management. These stomatal fluxes suggest that ambient O 3 degrades biomass production and CO 2 sequestration by 20 %–24 % at crop sites, 6 %–29 % at deciduous broadleaf forests, and 4 %–20 % at evergreen needleleaf forests in the United States and Europe.

59 BASIC BIOLOGICAL SCIENCES↗

New methods to improve the vertical extrapolation of near-surface offshore wind speeds

Accurate characterization of the offshore wind resource has been hindered by a sparsity of wind speed observations that span offshore wind turbine rotor-swept heights. Although public availability of floating lidar data is increasing, most offshore wind speed observations continue to come from buoy-based and satellite-based near-surface measurements. The aim of this study is to develop and validate novel vertical extrapolation methods that can accurately estimate wind speed time series across rotor-swept heights using these near-surface measurements. We contrast the conventional logarithmic profile against three novel approaches: a logarithmic profile with a long-term stability correction, a single-column model, and a machine-learning model. These models are developed and validated using 1 year of observations from two floating lidars deployed in US Atlantic offshore wind energy areas. We find that the machine-learning model significantly outperforms all other models across all stability regimes, seasons, and times of day. Machine-learning model performance is considerably improved by including the air–sea temperature difference, which provides some accounting for offshore atmospheric stability. Finally, we find no degradation in machine-learning model performance when tested 83 km from its training location, suggesting promising future applications in extrapolating 10 m wind speeds from spatially resolved satellite-based wind atlases.

17 WIND ENERGY↗

Test strips detect different CO2 concentrations in closed compartments

Four different test strips, using crystal violet for one pair of strips and basic fuchsin as a dye for the second pair, give unambiguous colorimetric indications of four different concentrations of carbon dioxide in the atmosphere of a closed compartment. Tetraethylene pentamine is used as a dye decoloring agent.

Source record↗

Polarimetry of the daytime sky during solar eclipses.

Measurement of the degree of linear polarization of the residual illumination in the umbral region in different colors at intermediate levels in the atmosphere (10 to 12 km) during the total solar eclipses of May 30, 1965, and Nov. 12, 1966. The objective was to examine the polarization characteristics of light that had been scattered more than once. It is found that, in the middle of the visible region of the electromagnetic spectrum (0.4 to 0.6 micron), multiply scattered light is partially linearly polarized (about 20%) at the altitudes where the measurements have been made. Results of similar ground-based measurements performed during the annular eclipse of Sept. 11, 1969, are also briefly discussed.

Nagaraja Rao, C. R.↗

Structure of the ionospheric disturbances about planetary entry probes

Local ionospheric disturbances which would be created by a planetary entry probe are investigated. Competing theories of spacecraft-ambient plasma interactions are used to estimate computationally the perturbations of the plasma, particularly the structure of the near wake behind planetary entry vehicles. The results have bearing on the location and operation of plasma diagnostic instrumentation aboard planetary entry vehicles. Recent estimates of Mars ionospheric properties plus vehicle dimensions and speeds similar to those of the Viking Mars Lander are used to define the parameters essential to the theory. Smaller entry bodies are also considered. Comparisons are made of the results based on the different theories for a given assumed planetary atmosphere, and also with the perturbations a similar vehicle would generate in the earth's ionosphere.

Weil, H.↗

Intrepretation of surface features and surface processes on Mars

Eolian erosion and deposition on earth was studied in order to interpret the eolian land forms of Mars. Emphasis of the wind tunnel studies was on the flow field around models of eolian forms. Areas of the wind tunnel studies include: simulation of the atmospheric boundary layer; velocity profile measurements around different models in the desert boundary layer, and estimating shear stress distributions on the model surfaces; flow visualization techniques; streamline mapping using tuft photographs; and roughness contrasts.

Gad-El-hak, M.↗

Unified treatment of lifting atmospheric entry

This paper presents a unified treatment of the effect of lift on peak acceleration during atmospheric entry. Earlier studies were restricted to different regimes because of approximations invoked to solve the same transcendental equation. This paper shows the connection between the earlier studies by employing a general expression for the peak acceleration and obtains solutions to the transcendental equation without invoking the earlier approximations. Results are presented and compared with earlier studies where appropriate.

Nachtsheim, P. R.↗

The spatial-temporal ambiguity in auroral modeling

The paper examines the time-dependent models of the aurora which show that various ionospheric parameters respond to the onset of auroral ionization with different time histories. A pass of the Atmosphere Explorer C satellite over Poker Flat, Alaska, and ground based photometric and photographic observations have been used to resolve the time-space ambiguity of a specific auroral event. The density of the O(+), NO(+), O2(+), and N2(+) ions, the electron density, and the electron temperature observed at 280 km altitude in a 50 km wide segment of an auroral arc are predicted by the model if particle precipitation into the region commenced about 11 min prior to the overpass.

Rees, M. H.↗

A comparison of secondary craters on the moon, Mercury, and Mars

The present investigation is concerned with the distribution of secondary crater sizes and shapes and the relation of these distributions to inferred Martian lithology and ballistic history. Differences in secondary-crater size/range distributions around unmodified craters can be attributed to differences in gravitational potential, lithologic properties, and atmospheric interactions. Wide variations found in secondary crater populations around medium-size (5-50 km) Martian craters can be interpreted as effects of contrasting target lithologies. Extensive secondary cratering and elongate secondaries of Crater I in Chryse Planitia are consistent with a competent lithology of basaltic plains, as inferred from various photogeologic studies. The relatively few large secondaries around Arandas, and their high circularity, are consistent with a lithology exhibiting low yield strength, as inferred for the fractured plains.

Schultz, P. H.↗

Water absorption lines, 931-961 nm - Selected intensities, N2-collision-broadening coefficients, self-broadening coefficients, and pressure shifts in air

Intensities were measured for 97 lines of H2O vapor between 932 and 961 nm. The lines were selected for their potential usefulness for remote laser measurements of H2O vapor in the earth's atmosphere. The spectra were obtained with several different H2O vapor abundances and N2 broadening gas pressures; the spectral resolution was 0.046/cm FWHM. Measured H2O line intensities range from 7 x 10 to the -25th to 7 x 10 to the -22nd/cm per (molecules/sq cm). H2O self-broadening coefficients were measured for 13 of these strongest lines; the mean value was 0.5/cm per atm. N2-collision-broadening coefficients were measured for 73 lines, and the average was 0.11 cm per atm HWHM. Pressure shifts in air were determined for a sample of six lines between 948 and 950 nm; these lines shift to lower frequency by an amount comparable to 0.1 of the collision-broadened widths measured in air or N2. The measured intensities of many lines of 300-000 band are much larger than expected from prior computations, in some cases by over an order of magnitude. Coriolis interactions with the stronger 201-000 band appear to be the primary cause of the enhancement of these line intensities.

Giver, L. P.↗

Modeling of G333.6-0.2 as a spherical H II region

The radio and IR observations of the H II region G333.6-0.2 are matched with a detailed spherical model with a density distribution which has a uniform-density core of radius 0.05 pc, a power-law intermediate zone, and a uniform-density halo. A stellar radiation field is required that is somewhat different from those predicted by available model atmospheres. Of the stellar models of Kurucz, the Teff = 34,000 K and log g = 3.5 model best fits the observed ratio of helium to hydrogen recombination lines. A good fit to all the observations in obtained with an S(2+) ionizing flux which is a factor of 20 times less than predicted by the Kurucz atmosphere. Current model atmospheres may not be appropriate because a single stable star with Teff = 34,000 K fails by at least an order of magnitude to produce the ionizing luminosity. The small radius of the constant-density core implies a short dynamical lifetime of approximately 5000 years for this spherical model; this may indicate that a nonspherical blister geometry is more appropriate for this H II region.

Rubin, R. H.↗