Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffraction in time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Preparation, Physical-Chemical Characterization, and Cytocompatibility of Polymeric Calcium Phosphate Cements

Aim. Physicochemical mechanical and in vitro biological properties of novel formulations of polymeric calcium phosphate cements (CPCs) were investigated. Methods. Monocalcium phosphate, calcium oxide, and synthetic hydroxyapatite were combined with either modified polyacrylic acid, light activated polyalkenoic acid, or polymethyl vinyl ether maleic acid to obtain Types I, II, and III CPCs. Setting time, compressive and diametral strength of CPCs was compared with zinc polycarboxylate cement (control). Specimens were characterized using X-ray diffraction, scanning electron microscopy, and infrared spectroscopy. In vitro cytotoxicity of CPCs and control was assessed. Results. X-ray diffraction analysis showed hydroxyapatite, monetite, and brushite. Acid-base reaction was confirmed by the appearance of stretching peaks in IR spectra of set cements. SEM revealed rod-like crystals and platy crystals. Setting time of cements was 5–12 min. Type III showed significantly higher strength values compared to control. Type III yielded high biocompatibility. Conclusions. Type III CPCs show promise for dental applications.

60 APPLIED LIFE SCIENCES↗

Rapid detection of rare events from in situ X-ray diffraction data using machine learning

High-energy X-ray diffraction methods can non-destructively map the 3D microstructure and associated attributes of metallic polycrystalline engineering materials in their bulk form. These methods are often combined with external stimuli such as thermo-mechanical loading to take snapshots of the evolving microstructure and attributes over time. However, the extreme data volumes and the high costs of traditional data acquisition and reduction approaches pose a barrier to quickly extracting actionable insights and improving the temporal resolution of these snapshots. This article presents a fully automated technique capable of rapidly detecting the onset of plasticity in high-energy X-ray microscopy data. The technique is computationally faster by at least 50 times than the traditional approaches and works for data sets that are up to nine times sparser than a full data set. This new technique leverages self-supervised image representation learning and clustering to transform massive data sets into compact, semantic-rich representations of visually salient characteristics ( e.g. peak shapes). These characteristics can rapidly indicate anomalous events, such as changes in diffraction peak shapes. It is anticipated that this technique will provide just-in-time actionable information to drive smarter experiments that effectively deploy multi-modal X-ray diffraction methods spanning many decades of length scales.

Zheng, Weijian↗

Mechanism of Optical Charge Exchange of Magnetic Centers in BSO : Fe

High-resistance photosensitive crystals of Bi{sub 12}SiO{sub 20} (BSO) doped with iron ions were studied. X-ray diffraction analysis reveals the compression of a unit cell in a BSO : Fe crystal with increasing impurity concentration. Electron paramagnetic resonance demonstrates a decrease in the intensity of the EPR signal when the BSO: Fe crystal is exposed to light that generates photocarriers. It is found that the characteristic time of the EPR signal decrease is close to the value of the Maxwellian relaxation time measured with the help of the longitudinal electrooptical effect. A physical model of the mechanism of optical charge exchange of magnetic iron centers is discussed, based on the statement that the nature of the crystal bonds of the iron ion with ligands without structural modification of the crystal lattice changes during the photogeneration of carriers. A physical model is proposed, according to which a trivalent Fe{sup 3+} ion transforms into a divalent state of Fe{sup 2+} with a change in the total spin from 5/2 to 2. The compression of the unit cell with increasing iron ion concentration in the framework of the model under discussion is due to the transformation of atomic orbitals upon replacement of silicon ions by iron ions. The transformation process affects the cells unoccupied by iron, which is proved by the absence of a bifurcation of X-ray reflections and indicates the long-range nature of the intracrystalline interactions in sillenites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A neutron diffraction study of oxygen and nitrogen ordering in a kinetically stable orthorhombic iron doped titanium oxynitride

The synthesis of a polycrystalline powder sample of iron doped orthorhombic titanium oxynitride, Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98}, on the scale of 0.7 g has been achieved. This was conducted by the unusual route of delamination from a steel substrate of a thin film deposited using atmospheric pressure chemical vapour deposition. The structure of the titanium oxynitride is presented, determined from a combined analysis of X-ray and neutron powder diffraction data. The use of neutron diffraction allows the position of the oxygen and nitrogen ions in the material to be reported unambiguously for the first time. In this study Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98} is found to crystallise in the Cmcm space group, iso-structural pseudobrookite, with lattice parameters a=3.81080(6) A, b=9.6253(2) A, and c=9.8859(2) A, and contains partial oxygen-nitrogen ordering. Of the three anion sites in this structure one is exclusively occupied by oxygen, while the remaining two sites are occupied by oxygen and nitrogen in a disordered manner. Testing indicates that this iron doped titanium oxynitride is a metastable phase that decomposes above 700 Degree-Sign C into TiN and TiO{sub 2}, the thermodynamic products. - Graphical abstract: We report the synthesis of Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98} deposited as a thin film using atmospheric pressure chemical vapour deposition onto stainless steel, which is then delaminated to produce a polycrystalline powder sample. This powder sample was used in a neutron diffraction experiment, and analysis of this data has allowed the position of the oxygen and nitrogen ions in the material to be reported unambiguously for the first time. Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98} is found to crystallise in the Cmcm space group iso-structural pseudobrookite and contains partial oxygen-nitrogen ordering. Highlights: Black-Right-Pointing-Pointer Partial oxygen and nitrogen ordering has been observed using neutron diffraction. Black-Right-Pointing-Pointer A large powder sample has been made by removal of a CVD film from a steel substrate. Black-Right-Pointing-Pointer Structural details of Ti{sub 2.92}Fe{sub 0.01}O{sub 4.02}N{sub 0.98} are reported for the first time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composition, nanostructure, and optical properties of silver and silver-copper lusters

Lusters are composite thin layers of coinage metal nanoparticles in glass displaying peculiar optical properties and obtained by a process involving ionic exchange, diffusion, and crystallization. In particular, the origin of the high reflectance (golden-shine) shown by those layers has been subject of some discussion. It has been attributed to either the presence of larger particles, thinner multiple layers or higher volume fraction of nanoparticles. The object of this paper is to clarify this for which a set of laboratory designed lusters are analysed by Rutherford backscattering spectroscopy, transmission electron microscopy, x-ray diffraction, and ultraviolet-visible spectroscopy. Model calculations and numerical simulations using the finite difference time domain method were also performed to evaluate the optical properties. Finally, the correlation between synthesis conditions, nanostructure, and optical properties is obtained for these materials.

36 MATERIALS SCIENCE↗

Influence Of Ultrasonic Waves On The Formation Of High Pores Silicon Carbide

The Challenge to produce a quality Silicon Carbide that combination high surface area is promising and this material can be used in many application such as Hydrogen storage materials. Synthesis of high surface area carbon materials by selective etching of Silicon Carbide with choric acid while exposing ultrasonic wave have been made.Powder Of Sic (surface area 17.8 m{sup 2}/g) was treated in the chloric acetic as well as their mixture of various compositions and various time exposure of ultrasonic waves. Surface area and pore size can be controlled by temperature and concentration composition of Chloric and time exposure of ultrasonic wave.The resultant carbon and carbon-silicon carbide composite powders were characterized X-ray diffraction and Electron microscope. To determine a conversion degree of silicon carbide due to influence of the ultrasonic wave, the samples were annealed in open air at 1000 deg. C. There by carbon component of the carbon/silicon carbide composite was completely oxidized. The analysis of the samples shows the strong influence of time exposure of ultrasonic waves on the formation of pores.

36 MATERIALS SCIENCE↗

Micro-beam Laue alignment of multi-reflection Bragg coherent diffraction imaging measurements

Multi-reflection Bragg coherent diffraction imaging has the potential to allow three-dimensional (3D) resolved measurements of the full lattice strain tensor in specific micro-crystals. Until now such measurements were hampered by the need for laborious, time-intensive alignment procedures. Here, in this paper, a different approach is demonstrated, using micro-beam Laue X-ray diffraction to first determine the lattice orientation of the micro-crystal. This information is then used to rapidly align coherent diffraction measurements of three or more reflections from the crystal. Based on these, 3D strain and stress fields in the crystal are successfully determined. This approach is demonstrated on a focused ion beam milled micro-crystal from which six reflections could be measured. Since information from more than three independent reflections is available, the reliability of the phases retrieved from the coherent diffraction data can be assessed. Lastly, our results show that rapid, reliable 3D coherent diffraction measurements of the full lattice strain tensor in specific micro-crystals are now feasible and can be successfully carried out even in heavily distorted samples.

36 MATERIALS SCIENCE↗

Ultrafast Three-Dimensional Integrated Imaging of Strain in Core/Shell Semiconductor/Metal Nanostructures

Visualizing the dynamical response of material heterointerfaces is increasingly important for the design of hybrid materials and structures with tailored properties for use in functional devices. In situ characterization of nanoscale heterointerfaces such as metal-semiconductor interfaces, which exhibit a complex interplay between lattice strain, electric potential, and heat transport at subnanosecond time scales, is particularly challenging. Here in this work, we use a laser pump/X-ray probe form of Bragg coherent diffraction imaging (BCDI) to visualize in three-dimension the deformation of the core of a model core/shell semiconductor-metal (ZnO/Ni) nanorod following laser heating of the shell. We observe a rich interplay of radial, axial, and shear deformation modes acting at different time scales that are induced by the strain from the Ni shell. We construct experimentally informed models by directly importing the reconstructed crystal from the ultrafast experiment into a thermo-electromechanical continuum model. The model elucidates the origin of the deformation modes observed experimentally. Our integrated imaging approach represents an invaluable tool to probe strain dynamics across mixed interfaces under operando conditions.

36 MATERIALS SCIENCE↗

PIND: High spatial resolution by pinhole neutron diffraction

Here, a pinhole neutron diffraction (PIND) technique was developed to enable improving the spatial resolution down to 250 μm. Instead of the conventional engineering diffraction method which integrates all the diffraction signals on the detector plane, the PIND setup utilizes the diffraction pattern of each pixel on 2D detectors. The proposed PIND arrangement enables improving the spatial resolution of time-of-flight instruments and allows solving problems involving steep gradients of strain or texture. The phase content and preferential orientation of grains inside samples can be spatially resolved in 2D/3D. Further, PIND retains the capability of in-situ non-destructive neutron diffraction mapping of lattice strain and grain orientation under external stimuli such as temperature and force.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New Insights into Structural Evolution of LiNiO 2 Revealed by Operando Neutron Diffraction

LiNiO 2 (LNO) represents the end member in the compositional space of the LiNi 1-x-y Mn x Co y O 2 (as x and y approach zero) cathode system. Despite its high theoretical specific capacity (275 mAh/g), LNO suffers from phase transitions with large volume change and unfavorable reactions upon electrochemical cycling, which restricts its practical use in the application of lithium-ion batteries. While the contributing factor to the structural instability is commonly linked to the undesired volume collapse associated with the H2-H3 phase transition, detailed analysis of structural evolution following the entire route of phase transitions (H1-M-H2-H3) in real time under battery operating conditions remains a challenging task. In this work, we employ operando neutron diffraction to study the structural changes (crystal lattice, Li/Ni–O bond length, O–Ni–O bond angles, and LiO 2 /NiO 2 layer thickness) of LNO cathode in a home-built Li x NiO 2 || graphite full cell during Li + de-/intercalation. In particular, the anomalous increase(decrease) of Ni–O(Li–O) bond length at high SOC (>~85 %) in the H3 phase is discussed in the context of O 2- (2p)→Ni 4+ (3d) negative charge transfer.

25 ENERGY STORAGE↗

Early stages of spinodal decomposition in Fe–Cr resolved by in-situ small-angle neutron scattering

In-situ, time-resolved small-angle neutron scattering (SANS) investigations of the early stages of the spinodal decomposition process in Fe–35Cr were performed at 773 and 798 K. The kinetics of the decomposition, both in terms of characteristic distance and peak intensity, followed a power-law behaviour from the start of the heat treatment (a′{sup }= 0.10–0.11 and a″ = 0.67–0.86). Furthermore, the method allows tracking of the high–Q slope, which is a sensitive measure of the early stages of decomposition. Ex-situ SANS and atom probe tomography were used to verify the results from the in-situ investigations. Finally, the in-situ measurement of the evolution of the characteristic distance at 773 K was compared with the predictions from the Cahn-Hilliard-Cook model, which showed good agreement with the experimental data (a′{sup }= 0.12–0.20 depending on the assumed mobility)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deposition of Carbonated Hydroxyapatite (CO3HAp) on Poly(Methylmethacrylate Surfaces by Decomposition of Calcium-EDTA Chelate

Inspired from the nature, the development of organic-inorganic composites between polymers and hydroxyapatite (HAp) has been investigated extensively. In this study, bone-like apatite (carbonated hydroxyapatite, CO{sub 3}HAp) was precipitated on poly(methylmethacrylate) (PMMA) films by the oxidative decomposition of Ca-EDTA (calcium-ethylenediamine tetraacetate) chelates. Corona-treated PMMA films were soaked in a Ca-EDTA-PO{sub 4}-H{sub 2}O{sub 2} solution and aged at 63 C and pH-9 for times ranging from 1 to 24 h. Apatite formed on PMMA films was characterized by X-ray diffraction, Fourier transform infrared (FTIR), Scanning electron microscope, energy-dispersive X-ray spectroscopy, and carbon analysis. The apatite was found to be CO{sub 3}HAp with Ca/P atomic ratio ranging between 1.3 and 1.9. Elemental analyses indicated that the carbonate content of the apatite phase was around 6.5 wt% after 24 h of aging time. Lattice parameters were estimated using a Rietveld profile-analysis and found to be a = 0.9438 nm and c = 0.6901 nm. Furthermore, FTIR spectra indicated that the apatite deposited on PMMA was B-type CO{sub 3}HAp, in which carbonate ions occupy the phosphate sites. In the first 3 h of aging, isolated rod-like HAp particles were observed. With time, the needle-like crystallites radiate from a nucleus to form double-spherulite shape particles. The crystallites grew into a continuous layer with a thickness of -15 {micro}m after 24-h aging. The adhesive strength between the PMMA substrate and the apatite layer was determined to be around 1.7 MPa.

36 MATERIALS SCIENCE↗

Femtosecond mega-electron-volt electron microdiffraction

To understand and control the basic functions of physical, chemical and biological processes from micron to nano-meter scale, an instrument capable of visualizing transient structural changes of inhomogeneous materials with atomic spatial and temporal resolutions, is required. One such technique is femtosecond electron microdiffraction, in which a short electron pulse with femtosecond-scale duration is focused into a micron-scale spot and used to obtain diffraction images to resolve ultrafast structural dynamics over a localized crystalline domain. In this letter, we report the experimental demonstration of time-resolved mega-electron-volt electron microdiffraction which achieves a 5 μm root-mean-square (rms) beam size on the sample and a 110 fs rms temporal resolution. Using pulses of 10k electrons at 4.2 MeV energy with a normalized emittance 3 nm-rad, we obtained high quality diffraction from a single 10 μm paraffin ( C 44 H 90 ) crystal. The phonon softening mode in optical-pumped polycrystalline Bi was also time-resolved, demonstrating the temporal resolution limits of the instrument. In conclusion, this new characterization capability will open many research opportunities in material and biological sciences.

36 MATERIALS SCIENCE↗

The Key Role of U 28 in the Aqueous Self‐Assembly of Uranyl Peroxide Nanocages

Abstract For 11 years now, the structural diversity and aesthetic beauty of uranyl–peroxide capsules have fascinated researchers from the diverse fields of mineralogy, polyoxometalate chemistry, and nuclear fuel technologies. There is still much to be learned about the mechanisms of the self‐assembly process, and the role of solution parameters including pH, alkali template, temperature, time, and others. Here we have exploited the high solubility of the UO 2 2+ /H 2 O 2 /LiOH aqueous system to address the effect of the hydroxide concentration. Important techniques of this study are single‐crystal X‐ray diffraction, small‐angle X‐ray scattering, and Raman spectroscopy. Three key phases dominate the solution speciation as a function of time and the LiOH/UO 2 2+ ratio: the uranyl–triperoxide monomer [UO 2 (O 2 ) 3 ] 4− and the two capsules [(UO 2 )(O 2 )(OH)] 24 24− (U 24 ) and [(UO 2 )(O 2 ) 1.5 ] 28 28− (U 28 ). When the LiOH/U ratio is around three, U 28 forms rapidly and this cluster can be isolated in high yield and purity. This result was most surprising and challenges the hypothesis that alkali templating is the most important determinant in the cluster geometry. Moreover, analogous experiments with KOH, NH 4 OH, and TEAOH (TEA=tetraethylammonium) also rapidly yield U 28 , which suggests that U 28 is the kinetically favored species. Complete mapping of the pH–time phase space reveals only a narrow window of the U 28 dominance, which is why it was previously overlooked as an important kinetic species in this chemical system, as well as others with different counterions.

Falaise, Clément↗

DONUT: physics-aware machine learning for real-time X-ray nanodiffraction analysis

Coherent X-ray scattering techniques are critical for investigating the fundamental structural properties of materials at the nanoscale. While advancements have made these experiments more accessible, real-time analysis remains a significant bottleneck, often hindered by artifacts and computational demands. In scanning X-ray nanodiffraction microscopy, which is widely used to spatially resolve structural heterogeneities, this challenge is compounded by the convolution of the divergent beam with the sample’s local structure. To address this, we introduce DONUT (Diffraction with Optics for Nanobeam by Unsupervised Training), a physics-aware neural network designed for the rapid and automated analysis of nanobeam diffraction data. By incorporating a differentiable geometric diffraction model directly into its architecture, DONUT learns to predict crystal lattice strain and orientation in real-time. Crucially, this is achieved without reliance on labeled datasets or pre-training, overcoming a fundamental limitation for supervised machine learning in X-ray science. We demonstrate experimentally that DONUT accurately extracts all features within the data over 200 times more efficiently than conventional fitting methods.

Materials science↗

DONUT: Physics-aware Machine Learning for Real-time X-ray Nanodiffraction Analysis

SF-25-088 Coherent X-ray scattering techniques are critical for investigating the fundamental structural properties of materials at the nanoscale. While advancements have made these experiments more accessible, real-time analysis remains a significant bottleneck, often hindered by artifacts and computational demands. In scanning X-ray nanodiffraction microscopy, which is widely used to spatially resolve structural heterogeneities, this challenge is compounded by the convolution of the divergent beam with the sample’s local structure. To address this, we introduce DONUT (Diffraction with Optics for Nanobeam by Unsupervised Training), a physics-aware neural network designed for the rapid and automated analysis of nanobeam diffraction data. By incorporating a differentiable geometric diffraction model directly into its architecture, DONUT learns to predict crystal lattice strain and orientation in real-time. Crucially, this is achieved without reliance on labeled datasets or pre-training, overcoming a fundamental limitation for supervised machine learning in X-ray science. We demonstrate experimentally that DONUT accurately extracts all features within the data over 200 times more efficiently than conventional fitting methods.

Zhou, Tao [Argonne National Laboratory (ANL), Argo↗

New developments including X-ray standing waves in the dynamical Bragg diffraction program of X-ray Server

X-ray Server (https://x-server.gmca.aps.anl.gov) is a collection of programs for online modelling of X-ray diffraction and scattering. Additionally, the dynamical diffraction program is the second most popular Server program, contributing 34% of total Server usage. It models dynamical X-ray diffraction from strained crystals and multilayers for any Bragg-case geometry including grazing incidence and exit. This paper reports on a revision of equations used by the program, which yields ten times faster calculations in most use cases, on implementing calculations of X-ray standing waves and on adding new options for modelling diffraction from monolayers.

36 MATERIALS SCIENCE↗

Direct structural retrieval from gas-phase ultrafast diffraction data using a genetic algorithm

Ultrafast scattering techniques such as ultrafast electron diffraction and ultrafast x-ray diffraction have been utilized to elucidate the structural dynamics, reaction intermediates, and final products in molecular reactions following photoexcitation. The time-dependent structures are typically not directly retrieved from the experimental data, but they rely on comparison with calculations. The genetic algorithm (GA), a global optimization strategy, can be used to retrieve the molecular structures directly from diffraction patterns without any theoretical input. However, the robustness of the GA with respect to real experimental conditions such as a limited momentum transfer range, noise, and artifacts has not been studied in detail. In this work, we characterize the performance of the GA with simulated data that mimic realistic experimental conditions. We have developed and implemented a variant of the GA specific to diffraction measurements which performs better in the presence of imperfect data compared to the standard implementation of the GA. We demonstrate this method with both synthetic data and experimental ultrafast electron diffraction data on the UV-induced photodissociation of trifluoroiodomethane (C⁢F 3⁡ I) molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗