Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrocatalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Improving the bulk gas transport of Fe-N-C platinum group metal-free nanofiber electrodes via electrospinning for fuel cell applications

To overcome transport limitations associated with thicker platinum group metal-free (PGM-free) electrodes, it's essential to investigate and tailor alternative electrode architectures to maximize the bulk electrode transport properties, whilst not significantly impeding electrocatalyst active site accessibility and electrode proton resistance. In this work, PGM-free nanofiber electrode mats, prepared by electrospinning a mixture of pyrolyzed Fe-N-C catalyst, Nafion ionomer and a carrier polymer Poly Acrylic acid (PAA), were compared to traditionally prepared electrodes. The morphological properties and elemental distribution of the fabricated nanofiber electrodes showed that the exterior surface of the PGM-free nanofibers was conformally covered with a thin ionomer film. Electrochemical diagnostics performed utilizing cyclic voltammetry, electrochemical impedance spectroscopy (EIS) and H 2 -limiting current measurements, revealed an increase in electric double layer capacitance, reduction in electrode proton transport and a significant improvement in bulk-electrode gas transport properties for the nanofiber electrodes, supporting the observed performance increase from electrochemical polarization data obtained in H 2 -O 2 /Air fuel cells. At 100% RH in H2/Air, the power density of the nanofiber electrodes increased ca. 50% vs. the traditionally prepared electrodes (ca. 260 vs 175 mW cm -2 ), which was attributed to a less tortuous molecular diffusion pathway and an associated reduction in the pressure dependent and independent gas transport resistances in the nanofiber electrodes.

25 ENERGY STORAGE↗

Rationally designed negative electrode for selective CO 2 -to-CO conversion in protonic ceramic electrochemical cells

Protonic ceramic electrochemical cells (PCECs) are solid-state electrochemical devices that employ proton-conducting oxides as electrolytes, which offer a promising approach for electrification of chemical manufacturing, including CO 2 reduction to produce value-added chemicals (e.g., CO). The primary advantage of PCECs is their intermediate operating temperatures (300–600 °C), which thermodynamically and kinetically favor the CO 2 reduction chemistry at the negative electrode. However, the conventional negative electrodes of PCECs, such as BaZr 0.8–x Ce x Y 0.2 O 3-δ -Ni or BaZr 0.8–x Ce x Y 0.1 Yb 0.1 O 3-δ -Ni, cannot reduce CO 2 to either CH 4 or CO with a selectivity of >99 %, leading to the production of a CO and CH 4 mixture. Herein, an oxide-supported in-situ exsolved Ni-Fe alloyed nanoparticle electrocatalyst, Sr 2 Fe 1.4 Mo 0.5 O 6-δ -Ni0.175 (SFM-Ni0.175), is first employed as the negative electrode of PCECs. The PCECs equipped with this new negative electrode selectively favor the CO 2 -to-CO conversion. A selectivity of ~100 % toward CO has been demonstrated over a wide range of operating temperatures (400–600 °C) and applied potentials/current densities. The negative electrode demonstrated in this work fully suppresses the CH 4 production. In situ diffuse reflectance infrared spectroscopy (DRIFTS) was performed to probe the CO 2 reduction mechanisms over both SFM-Ni0.175 and the traditional negative electrode (BCZYYb7111 +Ni), which indicates SFM-Ni0.175 inhibits the formation of formate species, leading to selective production of CO. Finally, this work validates that PCECs equipped with the rationally designed negative electrode can selectively manufacture chemicals.

25 ENERGY STORAGE↗

Graphene-supported single atom catalysts for high performance lithium-oxygen batteries

The optimal choice of d-block metals in single atom catalysts (SACs) is crucial for designing efficient electrocatalysts for activating the Oxygen reduction reaction (ORR)/ Oxygen evolution reaction (OER) in lithiumoxygen batteries (LOBs). Herein, we used the Quantum Mechanics methods to understand the origin of reactivity for a series of 16 d-block metals supported on nitrogen-doped graphene as SACs for ORR and OER in LOBs. Based on the Gibbs free energy calculations, we found that among the 16 SACs investigated, Zn-SAC exhibits the highest electrochemical activity with the lowest overpotential of 0.17 V. Here we then used machine learning (ML) to develop an intrinsic descriptor, phi, that correlates the catalytic activity with electronic and chemical properties of the catalytic centers at the M-N 4 active site on graphene surface. We established a linear relationship between phi and the catalytic activity that provides guidance for designing efficient SACs for electrocatalysis in LOBs. To validate these predictions, we report electrochemical measurements showing that Zn-SAC exhibits an ultra-stable cyclability with reduced overpotentials over Mo-SAC and nitrogen-doped graphene (NG), confirming our theoretical prediction. This fundamental work provides a deep understanding on the rational design of efficient SACs for OER/ ORR in LOBs.

25 ENERGY STORAGE↗

Exploring the potential of high entropy perovskite oxides as catalysts for water oxidation

Electrochemical water splitting is a promising technology to renewably generate hydrogen from water with no carbon footprint. However, the catalytic efficiency is hindered by the sluggishness of the oxygen evolution reaction (OER) at the anode. Therefore, developing earth-abundant, stable, and efficient OER catalysts is of keen interest. Recent studies have demonstrated that high entropy perovskite oxides (HEPOs) can exhibit superior OER activity and excellent electrochemical stability due to the synergistic effects of the multiple cations and the high entropy configuration effect. In this opinion paper, we point out the strengths and discuss the challenges and future prospects for HEPO-based electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemically influenced cation inter-diffusion and Co 3 O 4 formation on La 0.6 Sr 0.4 CoO 3 infiltrated into SOFC cathodes

Nanosized LSC electrocatalyst was infiltrated into a porous scaffold cathode composed of Sm 2 O 3 -doped CeO 2 (SDC) and La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) in a commercial button solid oxide fuel cell (SOFC). To understand the stability of cathodes infiltrated with LSC, the infiltrated composite cells were subjected to both electrochemical operating and thermal aging states at 750 °C for 1500 h. Nanostructure and local chemistry evolution of La 0.6 Sr 0.4 CoO 3 (LSC) infiltrated cathodes upon operation and aging were investigated by transmission electron microscopy. After operation, the LSC remained a cubic perovskite, and the crystal grains exhibit comparable size to as-infiltrated LSC grains. Inter-diffusion of Fe from the LSCF to a Fe-incorporated LSC layer developed on the LSCF backbone. However, only sharp interfaces were observed between LSC and SDC backbone in the as-infiltrated cathode and such interfaces remain after operation. The infiltrated LSC on the SDC backbone also retains granular particle morphology. Furthermore, newly grown Co 3 O 4 nanocrystals were found in the operated cathode. After thermal aging, on the other hand, cation inter-diffusion across the interfaces of the infiltrate particles and the cathode backbones is less than that from the operated cells. Lastly, the following hypothesis is proposed: Co 3 O 4 forms on LSC arising from local charge balancing between cobalt and oxygen vacancies.

30 DIRECT ENERGY CONVERSION↗

Catalytic Porphyrin Framework Compounds

Porphyrins are frequently observed in nature and play a vital role in many biological functions, including light-harvesting, oxygen transport, and catalytic transformations. The rigid, robust, and multifunctional features of porphyrins enable the construction of framework compounds such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) for use in several important applications. This short review here summarizes the types of porphyrin building blocks with varying connectivity, their assembly into framework compounds, and key structural factors governing porphyrin ligand design. Furthermore, we highlight emerging catalytic applications of these porphyrin framework compounds as Lewis acid catalysts, oxidation catalysts, photocatalysts, and electrocatalysts. Together, this review supplies a timely update on porphyrin ligand design and framework compound synthesis and guides the future development of porphyrin framework compounds with diverse functionalities for efficient catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bipolar Membranes for Ion Management in (Photo)Electrochemical Energy Conversion

Conspectus (Photo)electrochemical energy conversion is important in the development of a carbon-neutral energy economy because it can provide a pathway for mitigating the intermittency of renewable energy sources such as wind and solar. In order to operate efficiently, these technologies, which include photoelectrochemical cells, water and CO 2 electrolyzers, fuel cells, and redox flow batteries, require fast charge transfer kinetics at the electrode/electrolyte interface as well as robust ion management in the electrolyte. In conventional electrolyzers and fuel cells, the electrolyte is strongly acidic or basic and ionic current is carried by H + or OH – ions. In contrast, photoelectrodes and electrocatalysts for water splitting are often studied in buffered solutions. The question of ion balance in these systems led us to analyze the polarization losses due to ion concentration gradients in cells that employed various buffer–membrane combinations. Continuously driving the buffer ions across an ionomer membrane not only lowers the buffer capacity of an aqueous electrolyte but also introduces pH gradients that result in significant energy losses. To address the problem, we and other groups have studied the use of reverse-biased bipolar membranes (BPMs) in (photo)electrolytic cells. BPMs consist of an anion exchange layer (AEL) laminated with a cation exchange layer (CEL) and are usually equipped with a catalytic layer in between to accelerate the water dissociation reaction. At the AEL/CEL interface, water dissociates into protons and hydroxide ions, which replenish those consumed at the cathode and anode. Compared to conventional water electrolyzers with proton/anion exchange membranes (PEM/AEM), BPM electrolyzers provide the unique advantage of continuously operating the cathode and anode under different pH conditions, which is desirable when the two electrode reactions have different pH requirements. BPMs also enable the use of buffered electrolytes at pH values that are optimized for electrode stability and product selectivity in applications such as CO 2 electrolysis. Product crossover losses and CO 2 pumping can be dramatically reduced in BPM-based CO 2 electrolyzers, relative to conventional alkaline membranes, by electrostatic repulsion (of anionic products) and electroosmotic drag (for neutral products). BPM-based gas fed CO 2 electrolyzers can achieve high current density, but they suffer from low Faradaic efficiency (FE) due to the acidic local environment of the CEL. This problem can be mitigated by adding an aqueous buffering layer or by creating a weak acid cation exchange film on the CEL face of the membrane. The use of BPMs in fuel cells and redox flow batteries offers some interesting advantages. Configurations with both reverse and forward bias have been studied, but forward bias has been favored due to material compatibility, reaction kinetics, and thermodynamic considerations. The net reaction at the AEL/CEL interface is the acid–base neutralization reaction, which has a high inherent reaction rate constant, but in the BPM is limited to a nanometric space-charge layer and requires efficient catalysis to achieve high current density. Understanding the mechanism of the acid–base neutralization and the opposite process, the water dissociation reaction, will be essential for improving the performance of forward-biased BPMs. In conclusion, this Account reviews our current understanding of the working mechanisms of BPMs and discusses how we can use them to effectively manage ions for various (photo)electrochemical applications.

Yan, Zhifei↗

Synthesis, Processing, and Use of Isotopically Enriched Epitaxial Oxide Thin Films

Isotopic engineering has emerged as a key approach to study the nucleation, diffusion, phase transitions, and reactions of materials at an atomic level. It aims to uncover mass transport pathways, kinetics, and operational and failure mechanisms of functional materials and devices. Understanding these phenomena leads to deeper insights into important physical processes, such as the transport of ions in energy conversion and storage devices and the role of active sites and supports during heterogeneous catalytic reactions. Likewise, isotopic engineering is being pursued as a means of modifying functionality to enable future technological applications. In this Account, we summarize our recent work employing isotope labeling (e.g., 18 O 2 and 57 Fe) during thin film synthesis and postgrowth processing to reveal growth mechanisms, defect chemistry, and elemental diffusion under working and extreme conditions. Isotope-resolved analysis techniques with nanometer-scale spatial resolution, such as time-of-flight secondary ion mass spectrometry and atom probe tomography, facilitate the accurate quantification of isotopic placement and concentration in our well-defined heterostructures with precisely positioned, isotope-enriched layers. By measuring the nanometer-scale redistribution between natural abundance and isotopically enriched oxygen layers during the deposition of Fe 2 O 3 and Cr 2 O 3 by molecular beam epitaxy, we identified intermixing processes driven by surface adatoms occurring both at the film growth surface and within the first few layers below the surface. Further insights into synthesis mechanisms were gained by studying the tungsten oxide thin films grown by evaporating WO 3 powder in the presence of background 18 O 2 , revealing minimal incorporation of background oxygen during the film formation process. Thermal and radiation-enhanced diffusion in epitaxial Fe and Cr oxides were precisely tracked using 18 O and 57 Fe tracer layers incorporated into model epitaxial oxide thin films. This approach has allowed us to access thermal diffusion behavior at lower temperatures than previously measured, revealing a potential changeover in diffusion mechanism. Understanding radiation-enhanced diffusion in model oxides that represent the surface layers on the structural components of nuclear reactors informs our understanding of their corrosion behavior under irradiation. Isotopic labeling can also provide unique insights into the surface exchange reactions and defect chemistry of electrocatalysts. For instance, tracking the change in 18 O concentration at the surface of an epitaxial LaNiO 3 thin film after the electrocatalytic oxygen evolution reaction revealed the participation of lattice oxygen, confirming a hypothesis that had been proposed previously. Lastly, we highlight a new direction wherein we perform in situ processing studies utilizing isotopic tracers in conjunction with model epitaxial thin films within the atom probe tomography instrument. Additionally, this Account illustrates the great potential of isotopic engineering to enable fundamental mechanistic insights into physical processes and engineer functional properties in epitaxial films, heterostructures, and superlattices.

36 MATERIALS SCIENCE↗

Gastight Hydrodynamic Electrochemistry: Design for a Hermetically Sealed Rotating Disk Electrode Cell

Rotating disk electrodes (RDEs) are widely used in electrochemical characterization to analyze the mechanisms of various electrocatalytic reactions. RDE experiments often make use of or require collection and quantification of gaseous products. The combination of rotating parts and gaseous analytes makes the design of RDE cells that allow for headspace analysis challenging due to gas leaks at the interface of the cell body and the rotator. In this manuscript we describe a new, hermetically sealed electrochemical cell that allows for electrode rotation while simultaneously providing a gastight environment. Electrode rotation in this new cell design is controlled by magnetically coupling the working electrode to a rotating magnetic driver. Calibration of the RDE using a tachometer shows that the rotation speed of the electrode is the same as that of the magnetic driver. To validate the performance of this cell for hydrodynamic measurements, limiting currents from the reduction of a potassium ferrocyanide (K 4 [Fe(CN) 6 ]·3H 2 O) were measured and shown to compare favorably with calculated values from the Levich equation and with data obtained using more typical, nongastight RDE cells. Faradaic efficiencies of ~95% were measured in the gas phase for oxygen evolution in alkaline media at an Inconel 625 alloy electrocatalyst during rotation at 1600 rpm. These data verify that a gastight environment is maintained even during rotation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Production of C 2 /C 3 Oxygenates from Planar Copper Nitride-Derived Mesoporous Copper via Electrochemical Reduction of CO 2

Electrochemical reduction of CO 2 provides an opportunity to produce fuels and chemicals in a carbon-neutral manner, assuming that CO 2 can be captured from the atmosphere. To do so requires efficient, selective, and stable catalysts. In this study, we report a highly mesoporous metallic Cu catalyst prepared by electrochemical reduction of thermally nitrided Cu foil. Under aqueous saturated CO 2 reduction conditions, the Cu 3 N-derived Cu electrocatalyst produces virtually no CH 4 , very little CO, and exhibits a faradaic efficiency of 68% in C 2+ products (C 2 H 4 , C 2 H 5 OH, and C 3 H 7 OH) at a current density of ~18.5 mA cm –2 and a cathode potential of -1.0 V versus the reversible hydrogen electrode. Under these conditions, the catalyst produces more oxygenated products than hydrocarbons. We show that surface roughness is a good descriptor of catalytic performance. The roughest surface reached 98% CO utilization efficiency for C 2+ product formation from CO 2 reduction and the ratio of oxygenated to hydrocarbon products correlates with the degree of surface roughness. These effects of surface roughness are attributed to the high population of undercoordinated sites as well as a high pH environment within the mesopores and adjacent to the surface of the catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metallic Hydrogen in Atomically Precise Gold Nanoclusters

Hydrogen–metal interaction is the foundation of many technologies and processes, but how hydrogen behaves in atomically precise gold nanoclusters remains unknown even though they have been used in hydrogenation catalysis and water splitting. Herein, we investigate how hydrogen interacts with [Au25(SR)18]q clusters and mono-atom-doped bimetallic [M1Au24(SR)18]q clusters (M = Pt, Pd, Ag, Cu, Hg, or Cd) from first principles. We find that hydrogen behaves as a metal in these clusters and contributes its 1s electron to the superatomic free-electron count. This opposite behavior compared to that of the hydride in Cu and Ag clusters allows the small hydrogen to interstitially dope the gold clusters and tune their superatomic electronic structure. The doping energetics shows that when an eight-electron superatom is formed after H doping, the binding energy of H is much stronger, while binding of H with an already eight-electron superatom is much weaker. Indeed, frontier orbitals and the HOMO–LUMO gaps of [Au25H1(SR)18]0, [Au25H2(SR)18]+, [PtAu24H2(SR)18]0, [PdAu24H2(SR)18]0, [AgAu24H(SR)18]0, and [CuAu24H(SR)18]0 all have very similar features, because they are all eight-electron superatoms. By calculating the Gibbs free energies of hydrogen adsorption, we predict that PtAu24(SR)18, PdAu24(SR)18, and center-doped CuAu24(SR)18 can be good electrocatalysts for the hydrogen evolution reaction.

Hu, Guoxiang↗

Theoretical Modeling of Electrochemical Proton-Coupled Electron Transfer

Proton-coupled electron transfer (PCET) plays an essential role in a wide range of electrocatalytic processes. Here, a vast array of theoretical and computational methods have been developed to study electrochemical PCET. These methods can be used to calculate redox potentials and pKa values for molecular electrocatalysts, proton-coupled redox potentials and bond dissociation free energies for PCET at metal and semiconductor interfaces, and reorganization energies associated with electrochemical PCET. Periodic density functional theory can also be used to compute PCET activation energies and perform molecular dynamics simulations of electrochemical interfaces. Various approaches for maintaining a constant electrode potential in electronic structure calculations and modeling complex interactions in the electric double layer (EDL) have been developed. Theoretical formulations for both homogeneous and heterogeneous electrochemical PCET spanning the adiabatic, nonadiabatic, and solvent-controlled regimes have been developed and provide analytical expressions for the rate constants and current densities as functions of applied potential. The quantum mechanical treatment of the proton and inclusion of excited vibronic states have been shown to be critical for describing experimental data, such as Tafel slopes and potential dependent kinetic isotope effects. The calculated rate constants can be used as input to microkinetic models and voltammogram simulations to elucidate complex electrocatalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Catalysts with Diphosphine Ligands Containing Pendant Amines

Pendant amines play an invaluable role in chemical reactivity, especially for molecular catalysts based on Earth-abundant metals. As inspired by [FeFe]-hydrogenases, which contain a pendant amine positioned for cooperative bifunctionality, synthetic catalysts have been developed to emulate this multifunctionality through incorporation of a pendant amine in the second coordination sphere. Cyclic diphosphine ligands containing two amines serve as the basis for a class of catalysts that have been extensively studied and used to demonstrate the impact of a pendant base. These 1,5-diaza-3,7-diphosphacyclooctanes, now often referred to as “P 2 N 2 ” ligands, have profound effects on the reactivity of many catalysts. The resulting [Ni(P R 2 N R ´ 2 ) 2 ] 2+ complexes are electrocatalysts for both the oxidation and production of H 2 . Achieving the optimal benefit of the pendant amine requires that it has suitable basicity and is properly positioned relative to the metal center. In addition to the catalytic efficacy demonstrated with [Ni(P R 2 N R ´ 2 )2] 2+ complexes for the oxidation and production of H2, catalysts with diphosphine ligands containing pendant amines have also be demonstrated for a variety of metals for many different reactions, both in solution and immobilized on surfaces. Here, the impact of pendant amines in catalyst design has been demonstrated and continues to expand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Rhenium Bis -tetramethylphenanthroline Catalyst for CO 2 Reduction to Formate

Catalytic CO 2 reduction reactions featuring high selectivity toward formate are relatively rare. In some homogeneous molecular CO 2 -reducing electrocatalysis, using triethylamine (TEA) and isopropanol (IPA) as additives improves catalytic performance in producing formate. In this paper, we investigate whether the rhenium(I) bis-diimine dicarbonyl complexes, cis-[Re(N^N) 2 (CO) 2 ] + , where N^N is 2,2’-bipyridine ([1] + ) or 3,4,7,8-tetramethyl-1,10-phenanthroline ([2] + ), are capable of electrocatalytically reducing CO 2 to formate in acetonitrile containing TEA and IPA. Catalyst [1] + was ineffective at CO 2 reduction, yielding formate quantities comparable to those produced in experiments without the catalyst. Catalyst [2] + , however, is a promising electrocatalyst for the CO 2 reduction reaction in the presence of TEA and IPA, with formate being produced in millimolar concentrations (10.5 mM), as detected by 1 H NMR spectroscopy after 6 h electrolysis (formate Faradaic efficiency = 11%, with the major balance going to H 2 ). Upon more detailed examination, [2] + exhibited a turnover frequency (TOF) of 12 s –1 for formate, comparable to other leading molecular catalysts that competently execute this reduction. Combinations of spectroscopy, electrochemistry, and theory were used to better understand the mechanism of CO 2 reduction by [2] + . Fourier transform infrared spectroelectrochemical (FTIR-SEC) data provided no evidence for CO ligand dissociation or substitution upon one- and two-electron reduction of [2] + , suggesting that a mechanism distinct from one that is metal-hydride-based is operative in catalysis. Computational studies guide mechanistic investigations toward the proposed formation of a hydrophenanthroline-based intermediate responsible for hydride transfer to CO 2 and electrocatalytic formate production from [2] + .

Beverages↗

Reconstruction and Dissolution of Copper Catalysts during Electrocatalytic Nitrate Reduction

Copper-based electrocatalysts are widely explored for electrochemical nitrate remediation, yet their stability under operating conditions remains poorly understood. While nanoscale and subnanoscale Cu motifs are known to restructure during the nitrate reduction reaction (NO 3 RR), how these transformations translate into irreversible material loss remains unclear. Here, we quantify Cu dissolution during NO 3 RR as a function of catalyst architecture and electrolyte chemistry using two model systems: single-atom Cu (Cu 1 ) and Cu nanoparticles (Cu NP ). Time-resolved leaching measurements, integrated with in situ X-ray absorption spectroscopy (XAS), reveal measurable Cu loss for both catalysts during NO 3 RR. Dissolution is concentrated at the initiation of electrolysis, coinciding with rapid restructuring, and depends strongly on morphology, with Cu NP consistently exhibiting greater Cu loss than Cu 1 . In situ XAS reveals that Cu 1 forms transient metallic clusters under reduction that largely redisperse upon returning to open-circuit voltage, whereas Cu NP undergoes reduction of an oxidized surface layer accompanied by sustained Cu loss during electrolysis. Notably, the presence of nitrate significantly intensifies restructuring and Cu loss, highlighting the critical role of electrolyte composition. Furthermore, these findings establish a direct link between electrochemical restructuring and Cu dissolution, unveiling electrolyte-dependent interactions as key determinants of catalyst durability in electrochemical nitrate conversion.

36 MATERIALS SCIENCE↗

Electrochemical Aging and Halogen Oxides Formation on Multiwalled Carbon Nanotubes and Fe 3 O 4 @g-C 3 N 4 Coated Conductive Membranes

Electrochemical membrane filtration is widely reported to enhance water contaminants' degradation or rejection via anodic oxidation or cathodic repulsion. Despite their advances, electrochemical membranes or electrocatalysts often suffer from corrosion or passivation, especially under strong electrode potentials or reactions. Moreover, the formation of toxic byproducts, such as chlorinated organic compounds and oxyhalides (e.g., ClO 4 - ) is another major concern. This study investigated the membrane aging processes of two types of conductive membranes, multiwalled carbon nanotubes (MWCNTs) and ferrite/graphitic carbon nitride hybrids (Fe 3 O 4 @g-C 3 N 4 ) coated on ceramic membranes. Under high current densities (~ 20 mA∙cm -2 ) with anodic potentials (~10 V), MWCNTs and Fe 3 O 4 @g-C 3 N 4 catalysts underwent evident oxidation as indicated by an increase of the intensity ratio of the Raman spectral bands (I D /I G ) and charge transfer resistance (R ct ) of two electrochemical membranes. Under variations of electrode potentials, chloride or bromide were shown to be oxidized to bromate (BrO 3 - ) and chlorate (ClO 3 - ) at levels of 1-10 mmol∙L -1 . The formation of BrO 3 - and ClO 3 - was dependent on the solution pH, current densities (1-20 mA∙cm -2 ), and initial concentrations of Br or Cl ions. Finally, to warrant a safe and rational design and operation of electrochemically reactive membrane processes, membrane aging and toxic byproduct's formation deserve careful characterization under relevant water filtration environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intramolecular Electrostatic Effects on O 2 , CO 2 , and Acetate Binding to a Cationic Iron Porphyrin

Noncovalent electrostatic interactions are important in many biological and chemical reactions, especially those that involve charged intermediates. There has been a growing interest in using electrostatic ligand designs—placing charges in the second coordination sphere—to improve molecular reactivity, catalysis, and electrocatalysis. For instance, an iron porphyrin bearing four cationic ortho -trimethylanilinium groups, Fe( o -TMA), has been reported to be an exceptional electrocatalyst for both the carbon dioxide reduction reaction (CO 2 RR) and the oxygen reduction reaction (ORR). These reactions involve many different steps, and it is not evident which steps are affected by the four positive charges, or why. By comparing Fe( o -TMA) with the related iron-tetraphenylporphyrin, this work examines how covalently positioned charged groups affect substrate binding and other key pre-equilibria of both the ORR and CO 2 RR, specifically acetate, dioxygen, and carbon dioxide binding. This study is among the first to directly measure the effects of electrostatics on ligand-binding. The results show that adding electrostatic groups to a catalyst design often results in a complex interplay of multiple effects, including changes in pre-equilibria prior to substrate binding, combinations of through-space and inductive contributions, and effects of ionic strength and solution dielectric. The inverse half-order dependence of binding constant on ionic strength is proposed as a clear marker for an electrostatic effect. Overall, the conclusions provide guidance for the increasingly popular electrostatic ligand designs in catalysis and other reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lewis Acids and Electron-Withdrawing Ligands Accelerate CO Coordination to Dinuclear Cu I Compounds

A series of dinuclear molecular copper complexes were prepared and used to model the binding and Lewis acid stabilization of CO in heterogeneous copper CO 2 reduction electrocatalysts. Experimental studies (including measurement of rate and equilibrium constants) and electronic structure calculations suggest that the key kinetic barrier for CO binding may be a σ-interaction between CuI and the incoming CO ligand. The rate of CO coordination can be increased upon the addition of Lewis acids or electron-withdrawing substituents on the ligand backbone. Conversely, K eq for CO coordination can be increased by adding electron density to the metal centers of the compound, consistent with stronger π-backbonding. Lastly, the electrochemically measured kinetic results were mapped onto an electrochemical zone diagram to illustrate how these system changes enabled access to each zone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗