Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Clad to coolant heat transfer during RIA in PWR conditions

The power pulse during an insertion of reactivity accident (RIA) leads to a transient heating of the fuel. Heat transfer toward the coolant through the clad and associated temperature transient of the clad is of safety significance since it may largely impact the risk of clad failure. For sufficiently large enthalpy deposited within the fuel, clad temperature increases rapidly and this can lead to coolant boiling. This paper concerns the critical review of the present understanding and of the models for the clad to coolant heat transfer in RIA for PWR conditions. The results of past experiments are reviewed and the reliability of current models dedicated to these conditions is analyzed. It appears that the use of classical models for wall to fluid heat transfer does not allow predicting the clad temperature transient as measured in RIA-related experiments. The deviation is all the more large when film boiling conditions are reached. To reproduce the experimental data, some correlations of heat transfer can be fitted but the reliability of such model out of the range of conditions of the experimental data is low. It is mainly due to a rather low level of understanding of the heat transfer in very transient conditions (i.e. when the time scale of variation of the main heat transfer parameters, like a wall temperature, is less than the typical internal time scale of the heat transfer process itself). It results in a very large scattering in the numerical simulation of clad temperature when several fuel codes are considered. To improve the reliability of these calculations, it is believed that the study of transient boiling heat transfer thanks to devoted experimental facilities is required.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A combined experimental and computational analysis of failure mechanisms in open-hole cross-ply laminates under flexural loading

In this work, integrated experimental tests and computational modeling are proposed to investigate the failure mechanisms of open-hole cross-ply carbon fiber reinforced polymer (CFRP) laminated composites. In particular, we propose two effective methods, which include width-tapered double cantilever beam (WTDCB) and fixed-ratio mixed-mode end load split (FRMMELS) tests, to obtain the experimental data more reliably. We then calibrate the traction-separation laws of cohesive zone model (CZM) used among laminas of the composites by leveraging these two methods. The experimental results of fracture energy, i.e. G Ic and G Tc , obtained from WTDCB and FRMMELS tests are generally insensitive to the crack length thus requiring no effort to accurately measure the crack tip. Moreover, FRMMELS sample contains a fixed mixed-mode ratio of G IIc /G Tc depending on the width taper ratio. Examining comparisons between experimental results of FRMMELS tests and failure surface of B–K failure criterion predicted from a curve fitting, good agreement between the predictions and experimental data has been found, indicating that FRMMELS tests are an effective method to determine mixed-mode fracture criterion. In addition, a coupled experimental-computational modeling of WTDCB, edge notched flexure, and FRMMELS tests are adopted to calibrate and validate the interfacial strengths. Finally, failure mechanisms of open-hole cross-ply CFRP laminates under flexural loading have been studied systematically using experimental and multi-scale computational analyses based on the developed CZM model. The initiation and propagation of delamination, the failure of laminated layers as well as load-displacement curves predicted from computational analyses are in good agreement with what we have observed experimentally.

36 MATERIALS SCIENCE↗

Resonance Effects in the NASA Transonic Flutter Cascade Facility

Investigations of unsteady pressure loadings on the blades of fans operating near the stall flutter boundary are carried out under simulated conditions in the NASA Transonic Flutter Cascade facility (TFC). It has been observed that for inlet Mach numbers of about 0.8, the cascade flowfield exhibits intense low-frequency pressure oscillations. The origins of these oscillations were not clear. It was speculated that this behavior was either caused by instabilities in the blade separated flow zone or that it was a tunnel resonance phenomenon. It has now been determined that the strong low-frequency oscillations, observed in the TFC facility, are not a cascade phenomenon contributing to blade flutter, but that they are solely caused by the tunnel resonance characteristics. Most likely, the self-induced oscillations originate in the system of exit duct resonators. For sure, the self-induced oscillations can be significantly suppressed for a narrow range of inlet Mach numbers by tuning one of the resonators. A considerable amount of flutter simulation data has been acquired in this facility to date, and therefore it is of interest to know how much this tunnel self-induced flow oscillation influences the experimental data at high subsonic Mach numbers since this facility is being used to simulate flutter in transonic fans. In short, can this body of experimental data still be used reliably to verify computer codes for blade flutter and blade life predictions? To answer this question a study on resonance effects in the NASA TFC facility was carried out. The results, based on spectral and ensemble averaging analysis of the cascade data, showed that the interaction between self-induced oscillations and forced blade motion oscillations is very weak and can generally be neglected. The forced motion data acquired with the mistuned tunnel, when strong self-induced oscillations were present, can be used as reliable forced pressure fluctuations provided that they are extracted from raw data sets by an ensemble averaging procedure.

Lepicovsky, J.↗

Simulating Small-Scale Experiments of In-Tunnel Airblast Using STUN and ALE3D

This report details continuing validation efforts for the Sphere and Tunnel (STUN) and ALE3D codes. STUN has been validated previously for blast propagation through tunnels using several sets of experimental data with varying charge sizes and tunnel configurations, including the MARVEL nuclear driven shock tube experiment (Glenn, 2001). The DHS-funded STUNTool version is compared to experimental data and the LLNL ALE3D hydrocode. In this particular study, we compare the performance of the STUN and ALE3D codes in modeling an in-tunnel airblast to experimental results obtained by Lunderman and Ohrt in a series of small-scale high explosive experiments (1997).

42 ENGINEERING↗

Isopiestic measurements of thermodynamic properties for the aqueous system LiBr–CaBr 2 –H 2 O at 373.15 K

In this study, the isopiestic molalities for the systems LiBr–H 2 O, CaBr 2 –H 2 O and LiBr–CaBr 2 –H 2 O were measured at 373.15 K with the isopiestic method using the Oak Ridge National Laboratory (ORNL) high–temperature gravimetric isopiestic apparatus. The osmotic coefficients were determined based on the lithium chloride and sodium chloride reference standards. The vapor pressure diagrams and osmotic coefficient diagrams at different mole fraction for LiBr were plotted. The calculated vapor pressure with water activities agree well with the experimental data. On the basis of Pitzer original and its extended model, the Pitzer binary parameters β (0) , β (1) C (0) and C (1) for the systems LiBr–H 2 O and CaBr 2 –H 2 O and mixing parameters of θ Li,Ca and ψ Li,Ca,Br were fitted with the measured osmotic coefficients. The calculated osmotic coefficients for systems LiBr–H 2 O and CaBr 2 –H 2 O agree well with the experimental data. The agreement between the calculated water activities and experimental results for the ternary system indicates that the parameters obtained in this work are reliable for water activity calculation. Finally, the thermodynamic data obtained in this study are essential for development of universal thermodynamic models for brine systems containing lithium bromide and calcium bromide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of the Thermodynamic Properties of the Cyclohexane + n-Octane + n-Hexadecane Liquid Mixture by the Acoustic Method

The propagation of sound in the ternary cyclohexane + n-octane + n-hexadecane mixture at temperatures of 298–433 K and pressures of 0.1–100.1 MPa was investigated experimentally. The maximum error in measuring the velocity of sound in this mixture was 0.1%. Experimental data on the velocity of sound in such a mixture were obtained for the first time. On the basis of these data, the density, the isobaric expansion coefficient, the isobaric and isochoric heat capacities, and the isothermal compressibility of the indicated ternary mixture of three compositions at a temperature of 298–348 K and a pressure of 0.1–100 MPa and the deviation of the velocity of sound in it from the ideal one were determined. With the use of a number of semiempirical equations, the deviation of the velocity of sound in this mixture from the ideal one was estimated on the basis of the data on the velocity of sound in its pure components and in their binary compounds. A good agreement between the calculation and experimental data has been obtained. A table of the thermodynamic properties of the cyclohexane + n-octane + n-hexadecane mixture is presented.

42 ENGINEERING↗

Primary Processing Parameters, Porosity Production, and Fatigue Prediction for Additively Manufactured Alloy 718

Powder bed fusion processes commonly introduce voids and defects into components. It has been shown that many of these features and their size and shape characteristics are controllable through process parameter manipulation, but this process is typically time-consuming and expensive. In spite of this, an experiment was developed to explore a wide region of laser powder bed fusion process space, and several void measurements were obtained to characterize component density percentage, pore size, and pore shape. Then, multiple models commonly used in the literature to predict porosity were examined and compared with the experimental data. Using the developed porosity model, a fatigue life prediction framework was adapted, and the predictions were compared to the previously published experimental data. Results of this investigation reveal the strengths and weaknesses of multiple literature models in predicting porosity, and they depict how porosity and resulting fatigue lives vary across process space.

36 MATERIALS SCIENCE↗

Low- and intermediate-temperature oxidation of dimethyl ether up to 100 atm in a supercritical pressure jet-stirred reactor

Understanding the low- and intermediate-temperature oxidation chemistry of oxygenated fuels like dimethyl ether (DME) at high pressure is paramount to the development of advanced engines with low carbon emissions. The supercritical pressure jet-stirred reactor (SP-JSR) recently developed at Princeton provides a new platform for conducting kinetic studies at low and intermediate temperatures at extremely high pressures with a uniform temperature distribution and a short flow residence time. This paper uses the SP-JSR to investigate DME oxidation at equivalence ratios of 0.175, 1.0, and 1.72, for pressures of 10 and 100 atm, and temperatures ranging from 400 to 900 K. The results demonstrate weakened NTC behavior at 100 atm relative to 10 atm due to increased flux through QOOH + O 2 = O 2 QOOH relative to QOOH = 2 CH 2 O + OH at 100 atm. Furthermore, the intermediate-temperature oxidation window is shifted to lower temperatures at 100 atm. The experimental data are compared with several chemical kinetic models from the literature. The existing models are seen to agree quite well with the experimental data at 10 atm. However, the models fail to properly capture the NTC behavior at 100 atm. Reaction pathway analyses indicate that both the low- and intermediate-temperature chemistries are controlled by RO 2 consumption pathways. The reaction rates for several of the important reactions, such as DME + OH = CH 3 OCH 2 + H 2 O, H 2 O 2 (+M) = 2 OH (+M), and 2 HO 2 = 2 OH + O 2 are updated in this work. Furthermore, the updated model improves the predictability for all key species compared to the original model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Steady RANS methodology for calculating pressure drop in an in-line molten salt compact crossflow heat exchanger

We report the development of molten salt cooled reactors (MSR) and fluoride-salt cooled high temperature reactors (FHR) requires the use of advanced design tools for the primary heat exchanger design. Due to geometric and flow characteristics, compact (pitch to diameter ratios equal to or less than 1.25) heat exchangers with a crossflow flow arrangement can become desirable for these reactors. Unfortunately, the available experimental data is limited for compact tube bundles or banks in crossflow. Computational Fluid Dynamics can be used to alleviate the lack of experimental data in these tube banks. Previous computational efforts have been primarily focused on large S/D ratios (larger than 1.4) using unsteady Reynolds averaged Navier-Stokes and Large Eddy Simulation frameworks. These approaches are useful, but have large computational requirements that make comprehensive design studies impractical. A CFD study was conducted with steady RANS in an effort to provide a starting point for future design work. The study was performed for an in-line tube bank geometry with FLiBe (LiF-BeF2), a frequently selected molten salt, as the working fluid. Based on the estimated pressure drops, the pressure and velocity distributions in the domain, an appropriate meshing strategy was determined and presented. Periodic boundaries in the spanwise direction transverse flow were determined to be an appropriate boundary condition for reduced computational domains. The domain size was investigated and a minimum of 2-flow channels for a domain is recommended to ensure the behavior is accounted for. Finally, the standard low Re κ-ε (Lien) turbulence model was determined to be the most appropriate for steady RANS of this case at the time of writing.

42 ENGINEERING↗

Magnetic anisotropy of Fe{sub 1−y}X{sub y}Pt-L1{sub 0} [X = Cr, Mn, Co, Ni, Cu] bulk alloys

We demonstrate by means of fully relativistic first principles calculations that, by substitution of Fe by Cr, Mn, Co, Ni, or Cu in FePt-L1{sub 0} bulk alloys, with fixed Pt content, it is possible to tune the magnetocrystalline anisotropy energy by adjusting the content of the non-magnetic species in the material. The changes in the geometry due to the inclusion of each element induces different values of the tetragonality and hence changes in the magnetic anisotropy and in the net magnetic moment. The site resolved magnetic moments of Fe increase with the X content while those of Pt and X are simultaneously reduced. The calculations are in good quantitative agreement with experimental data and demonstrate that models with fixed band structure but varying numbers of electrons per unit cell are insufficient to describe the experimental data for doped FePt-L1{sub 0} alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the short argon arc with hot anode. II. Analytical model

A short atmospheric pressure argon arc is studied numerically and analytically. In a short arc with an inter-electrode gap of several millimeters, non-equilibrium effects in plasma play an important role in operation of the arc. High anode temperature leads to electron emission and intensive radiation from its surface. A complete, self-consistent analytical model of the whole arc comprising of models for near-electrode regions, arc column, and a model of heat transfer in cylindrical electrodes was developed. The model predicts the width of non-equilibrium layers and arc column, voltages and plasma profiles in these regions, and heat and ion fluxes to the electrodes. Parametric studies of the arc have been performed for a range of the arc current densities, inter-electrode gap widths, and gas pressures. The model was validated against experimental data and verified by comparison with numerical solution. In conclusion, good agreement between the analytical model and simulations and reasonable agreement with experimental data were obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ab initio quantum scattering calculations for the CO–O 2 system and a new CO–O 2 potential energy surface: O 2 and air broadening of the R(0) line in CO

We present ab initio calculations of the collisional broadening of the R(0) pure rotational line in CO (at 115 GHz) perturbed by O 2 . Our calculations are done in a fully quantum way by solving close-coupling quantum-scattering equations without any approximations. We also report a new, highly accurate CO–O 2 potential energy surface on which we did the quantum-scattering calculations. The calculated collisional broadening agrees with the available experimental data in a wide temperature range. The calculated collisional shift is negligible compared to the broadening, which is also consistent with the experimental data. We combine this result with our previous calculations for the same line in CO perturbed by N 2 [Józwiak et al., J. Chem. Phys. 154, 054314 (2021)]; the obtained air-perturbed broadening of the R(0) pure rotational line in CO and its temperature dependence perfectly agree with the HITRAN database. This result constitutes an important step toward developing a methodology for providing accurate ab initio reference data on spectroscopic collisional line-shape parameters for molecular systems relevant to the Earth’s atmosphere and for populating spectroscopic line-by-line databases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoactivation experiment on {sup 197}Au and its implications for the dipole strength in heavy nuclei

The {sup 197}Au({gamma},n) reaction is used as an activation standard for photodisintegration studies on astrophysically relevant nuclei. At the bremsstrahlung facility of the superconducting electron accelerator ELBE (Electron Linear accelerator of high Brilliance and low Emittance) of Forschungszentrum Dresden-Rossendorf, photoactivation measurements on {sup 197}Au have been performed with bremsstrahlung endpoint energies from 8.0 to 15.5 MeV. The measured activation yield is compared with previous experiments as well as with calculations using Hauser-Feshbach statistical models. It is shown that the experimental data are best described by a two-Lorentzian parametrization with taking the axial deformation of {sup 197}Au into account. The experimental {sup 197}Au({gamma},n) reaction yield measured at ELBE via the photoactivation method is found to be consistent with previous experimental data using photon scattering or neutron detection methods.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Towards an improved evaluation of neutron-induced fission cross sections on actinides

Mean-field calculations can now provide all the nuclear ingredients required to describe the fission path from the equilibrium deformation up to the nuclear scission point. The information obtained from microscopic mean-field models has been included in the TALYS reaction code to improve the predictions of neutron-induced fission cross sections. The nuclear inputs concern not only the details of the energy surface along the fission path, but also the coherent estimate of the nuclear level density derived within the combinatorial approach on the basis of the same single-particle properties, in particular at the fission saddle points. The predictive power of such a microscopic approach is tested on the experimental data available for the uranium isotopic chain. It is also shown that the various inputs can be tuned to reproduce, at best, experimental data in one unique coherent framework, so that in a close future it should become possible to make, on the basis of such models, accurate fission-cross-section calculations and the corresponding estimates for nuclei, energy ranges, or reaction channels for which no data exist. Such model uncertainties are usually not taken into account in data evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Charged pion photoproduction with the {Delta}(1232) baryon beyond the resonance region

We investigate the charged pion photoproduction off the proton target with the {Delta}(1232) baryon, i.e., {gamma}p{yields}{pi}{sup -{Delta}++}(1232) and {gamma}p{yields}{pi}{sup +{Delta}0}(1232), based on the effective Lagrangian method, beyond the resonance region, {radical}(s) > or approx. 2 GeV. We employ the {pi}- and {rho}-meson Regge trajectories in the t channel, in addition to the proton and {Delta} pole, in the s and u channels, respectively, and the contact-interaction contributions. A specific scheme for the form factor which satisfies the Ward-Takahashi identity, crossing symmetry, and on-shell condition is taken into account. We also consider a smooth interpolation between the Regge and Feynman propagators for the t-channel meson exchanges as a function of the Mandelstam variable s. We present the numerical results for the energy and angular dependences of the cross sections and the double- and single-polarization observables. It turns out that the present framework reproduces the experimental data qualitatively very well. In particular, the interpolation between the two propagators plays a crucial role in reproducing the high-energy experimental data correctly. The {pi}{sup +} decay-angle distribution is also studied using the {Delta}{sup ++}-decay frame, i.e., the Gottfried-Jackson frame. The present results will be a useful guide for future high-energy photon-beam experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Role of Inlet Boundary Conditions on Fuel-Air Mixing at Supercritical Conditions

Advanced engine design and alternative fuels present the possibility of fuel injection at purely supercritical conditions in diesel engines and gas turbines. The complex interactions that govern this phenomenon still need significant research, particularly the boundary conditions for fuel injection are critical for accurate simulation. However, the flow inside the injector itself is often omitted to reduce the computational efforts, and thus, velocity, mass flux, or total pressure is specified at the injector exit (or domain inlet), often with simplified velocity profiles and turbulence levels. This simplified inlet boundary treatment has minimal effects on results for conventional fuel injection conditions, however, the validity of this approach at supercritical conditions has not been assessed. Comprehensive real-gas and binary fluid mixing models have been implemented for computational fluid dynamics (CFD) analysis of fuel-air mixing at supercritical conditions. The model is verified using prior CFD results from the literature. The model is used to investigate the effects of the shape of axial velocity and mass fraction profiles at the inlet boundary with the goal to improve the comparison of predictions to experimental data. Results show that the boundary conditions have a significant effect on the predictions, and none of the cases match precisely with experimental data. Furthermore, the study reveals that the physical location of the inlet boundary might be difficult to infer correctly from the experiments and highlights the need for high-quality, repeatable measurements at supercritical conditions to support the development of relevant high-fidelity models for fuel-air mixing.

02 PETROLEUM↗

Magnetocaloric effect in La(Fe{sub x}Si{sub 1-x}){sub 13} ferromagnets

The isothermal changes in the magnetic entropy and the lattice entropy and the adiabatic temperature change in La(Fe{sub 0.88}Si{sub 0.12}){sub 13} and La(Fe{sub 0.86}Si{sub 0.14}){sub 13} ferromagnets in a magnetic field are calculated. The calculations are performed with a generalized magnetostriction model of a ferromagnet; the calculation results are compared to experimental data. It is shown that the change in the lattice entropy decreases the magnetocaloric effect and makes it possible to explain the experimental data obtained for La(Fe{sub x}Si{sub 1-x}){sub 13} (x = 0.86, 0.88) ferromagnets. The temperature dependences of the bulk compression moduli of these ferromagnets are calculated, and these dependences indicate a strong lattice softening in the vicinity of the magnetic phase transition in them. The thermal expansion coefficient and some magnetic properties of the ferromagnet with x = 0.86 are measured to determine the numerical values of the parameters entering into calculation formulas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and Computational Characterization of a Modified Sioutas Cascade Impactor for Respirable Radioactive Aerosols

Oak Ridge National Laboratory is collecting and characterizing aerosols released when spent nuclear fuel (SNF) rods are fractured in bending. An aerosol collection system was designed and tested to collect respirable sized (<10 μm aerodynamic diameter [AED]) particulates inside a hot cell facility. The setup is a modified version of the commercially available Sioutas cascade impactor, to which additional stages were added to expand the aerosol collection range from 2.5 to ~15 μm AED. To accommodate the additional stages and specific test conditions, the operating flow rate for aerosol collection was reduced, and testing was conducted by using pressure drop measurements, surrogate dust collection, and particle size characterization. The fluid flow distribution within the cascade and its stages was simulated in STAR-CCM+, and the stage-wise pressure drops obtained using the computational fluid dynamics model were then compared to experimental data. Lagrangian particle simulations were also performed, and stage-wise collection statistics were obtained from the simulation for comparison with the experimental data obtained using SNF-surrogate dust particles. The results provide valuable insights into the stage-wise particle collection characteristics of the modified cascade impactor and can also be used to improve the prediction accuracy of the manufacturer-determined analytical correlations.

aerosol modeling↗