Search NASA⌕ Search

SEARCH · Search NASA

Results for “gradient structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Liquid Crystal Orientation and Shape Optimization for the Active Response of Liquid Crystal Elastomers

Liquid crystal elastomers (LCEs) are responsive materials that can undergo large reversible deformations upon exposure to external stimuli, such as electrical and thermal fields. Controlling the alignment of their liquid crystals mesogens to achieve desired shape changes unlocks a new design paradigm that is unavailable when using traditional materials. While experimental measurements can provide valuable insights into their behavior, computational analysis is essential to exploit their full potential. Accurate simulation is not, however, the end goal; rather, it is the means to achieve their optimal design. Such design optimization problems are best solved with algorithms that require gradients, i.e., sensitivities, of the cost and constraint functions with respect to the design parameters, to efficiently traverse the design space. In this work, a nonlinear LCE model and adjoint sensitivity analysis are implemented in a scalable and flexible finite element-based open source framework and integrated into a gradient-based design optimization tool. To display the versatility of the computational framework, LCE design problems that optimize both the material, i.e., liquid crystal orientation, and structural shape to reach a target actuated shapes or maximize energy absorption are solved. Multiple parameterizations, customized to address fabrication limitations, are investigated in both 2D and 3D. The case studies are followed by a discussion on the simulation and design optimization hurdles, as well as potential avenues for improving the robustness of similar computational frameworks for applications of interest.

42 ENGINEERING↗
NASA NTRS1974

Meter and decameter wavelength positions of solar bursts of July 31-August 7, 1972

The positional analysis of solar bursts at meter and decameter wavelengths observed during the period from July 31 to Aug. 7, 1972 is presented. Most of the activity during this period was associated with the active regions McMath 11976 and 11970. Except near the central meridian passage of region 11976, two regions of continuum emission were observed - one a relatively smooth continuum and the other a continuum superimposed with many type III emissions and other fine structure. It seems possible to interpret these continua in terms of plasma waves originating from two sources located at different heights or with different electron density gradients. The angular size of type III sources seems to increase with decreasing frequency. This implies that the open field lines along which the type III electrons travel have larger angular extent at greater heights.

Kundu, M. R.↗
NASA NTRS1975

Retrieval of the HEAO-C spacecraft with Space Shuttle

A plan has been developed to retrieve the HEAO-C spacecraft from orbit with the Space Shuttle in the early 1980s. The initial HEAO-C orbit altitude must be increased to provide additional lifetime. A simple passive stabilization mode, using gravity gradient and aerodynamic torques, is used for long-term storage. Most of the modifications required for Orbiter compatibility result from manned safety requirements and the structural mounting. There is a positive disconnect of all power before entering the Orbiter bay, and pressure vessels are monitored continuously. Structural equipment is added in the Orbiter bay to receive and stow the Observatory.

Mitchell, D. H.↗
NASA NTRS1984

A statistical evaluation and comparison of VISSR Atmospheric Sounder (VAS) data and corresponding rawinsonde measurements

Three mesoscale sounding data sets from the VISSR Atmospheric Sounder (VAS) produced using different retrieval techniques were evaluated of corresponding ground truth rawinsonde data for 6-7 March 1982. Mean, standard deviations, and RMS differences between the satellite and rawinsonde parameters were calculated over gridded fields in central Texas and Oklahoma. Large differences exist between each satellite data set and the ground truth data. Biases in the satellite temperature and moisture profiles seem extremely dependent upon the three dimensional structure of the atmosphere and range from 1 deg to 3 deg C for temperature and 3 deg to 6 deg C for dewpoint temperature. Atmospheric gradients of basic and derived parameters determined from the VAS data sets produced an adequate representation of the mesoscale environment but their magnitudes were often reduced by 30 to 50%.

Source record↗
NASA NTRS1988

Radial Alfven velocity profiles in the magnetosphere and their relation to ULF wave field-line resonances

The radial Alfven velocity, V(A), in the magnetosphere was investigated using magnetic field and plasma data from the ISEE-1 spacecraft. The harmonic frequency structure calculated from these data was compared with the observed resonant wave structure in the frequency range 5-100 mHz and over the region L = 3-9. It was found that the frequency of these resonances depend on the A(V), which is a function of the magnetic field strength and plasma density. The toroidal mode resonance frequency structure was modeled for the first four harmonics, with excellent agreement between the modeled and observed harmonics for a passs which does not show a plasmapause gradient. In the presence of a steep plasmapause gradient, the model was found to predict a correspondingly steep increase in the resonance frequencies at the plasmapause, by about 5 mHz for the first harmonic and by 20 mHz for the fourth harmonic. Special consideration is given to the effect of heavy ion mass loading on the modeling.

Fraser, B. J.↗
NASA NTRS1990

Ground-based experiments on thermal and thermosolutal convection in inclined low-aspect-ratio enclosures

Thermal and thermosolutal convection driven by buoyancy forces are investigated experimentally in inclined low-aspect-ratio enclosures. Thermal and thermosolutal convection are important in crystal growth processes. The transport process in the fluid phase during the growth of a crystal has a profound influence on the structure and quality of the solid phase. The present work is concerned with natural convection in a shallow rectangular enclosure with imposed inclined temperature and/or concentration gradients. Various complex flow patterns are observed with different experimental conditions. A flow instability under certain conditions is reported. The flow instability is found to depend not only on the thermal and solutal Grashof numbers, the aspect ratios, but also the inclined angles.

Wang, L. W.↗
NASA NTRS1994

A new look at the simultaneous analysis and design of structures

The minimum weight optimization of structural systems, subject to strength and displacement constraints as well as size side constraints, was investigated by the Simultaneous ANalysis and Design (SAND) approach. As an optimizer, the code NPSOL was used which is based on a sequential quadratic programming (SQP) algorithm. The structures were modeled by the finite element method. The finite element related input to NPSOL was automatically generated from the input decks of such standard FEM/optimization codes as NASTRAN or ASTROS, with the stiffness matrices, at present, extracted from the FEM code ANALYZE. In order to avoid ill-conditioned matrices that can be encountered when the global stiffness equations are used as additional nonlinear equality constraints in the SAND approach (with the displacements as additional variables), the matrix displacement method was applied. In this approach, the element stiffness equations are used as constraints instead of the global stiffness equations, in conjunction with the nodal force equilibrium equations. This approach adds the element forces as variables to the system. Since, for complex structures and the associated large and very sparce matrices, the execution times of the optimization code became excessive due to the large number of required constraint gradient evaluations, the Kreisselmeier-Steinhauser function approach was used to decrease the computational effort by reducing the nonlinear equality constraint system to essentially a single combined constraint equation. As the linear equality and inequality constraints require much less computational effort to evaluate, they were kept in their previous form to limit the complexity of the KS function evaluation. To date, the standard three-bar, ten-bar, and 72-bar trusses have been tested. For the standard SAND approach, correct results were obtained for all three trusses although convergence became slower for the 72-bar truss. When the matrix displacement method was used, correct results were still obtained, but the execution times became excessive due to the large number of constraint gradient evaluations required. Using the KS function, the computational effort dropped, but the optimization seemed to become less robust. The investigation of this phenomenon is continuing. As an alternate approach, the code MINOS for the optimization of sparse matrices can be applied to the problem in lieu of the Kreisselmeier-Steinhauser function. This investigation is underway.

Striz, Alfred G.↗
NASA NTRS1999

Turbomachinery Design Quality Checks to Avoid Friction Induced Structural Failure

A unique configuration of the P&W SSME Alternate Fuel Turbopump turbine disk/blade assembly, combined with a severe thermal environment, resulted in several structural anomalies that were driven by frictional contact forces. Understanding the mechanics of these problems provides new quality checks for future turbo machinery designs. During development testing in 1997 of the SSME alternate fuel turbopump at Stennis Space Center, several potentially serious problems surfaced with the turbine disk/blade assembly that had not been experienced in extensive earlier testing. Changes to the operational thermal environment were noted based on analytical prediction of modifications that affected performance and on stationary thermal measurements adjacent to the rotor assembly. A detailed structural investigation was required to reveal the mechanism of distress induced by the change. The turbine disk experienced cracking in several locations due to increased thermal gradient induced stress during start and shutdown transients. This was easily predictable using standard analysis procedures and expected once the thermal environment was characterized. What was not expected was the curling of a piston ring used for blade axial retention in the disk, indentation of the axial face of the blade attachment by a spacer separating the first and second stage blades, and most significantly, galling and cracking of the blade root attachment that could have resulted in blade release. Past experience, in gas turbine environments, set a precedent of never relying on friction for help and to evaluate it only in specific instances where it was obvious that it would degrade capability. In each of the three cases above, friction proved to be a determining factor that pushed the components into an unsatisfactory mode of operation. The higher than expected temperatures and rapid thermal transients combined with friction to move beyond past experience. The turbine disk/blade assembly configuration contributed to the potential for these problems to occur by limiting the radial deflection from thermals and centrifugal loading. The cooled solid bore configuration was chosen to improve rotordynamic stability by limiting the length of rotor overhang while still protecting the roller bearing by maintaining zero slope under the inner race. During a start transient, the rim area of the disk heats rapidly and expands axially and circumferentially and requires corresponding radial and axial growth of the disk to maintain relative positioning of the disk, blades, spacers and retainer rings. The stiffness, large thermal mass, and bore cooling flow combine to severely limit the disk rim radial growth which results in the potential for relative movement between these parts. Friction then becomes a player in the determination of component stress.

Moore, Jerry H.↗
NASA NTRS1999

Directional Solidification of Bi-Sn on USMP-4

The experiments used MEPHISTO hardware to study the solidification and melting behavior of bismuth alloyed with 1 at% tin. Three samples, each approximately 900 mm long and 6mm in diameter, were used. A portion of each sample also included a 2 mm diameter growth capillary, to assist in the formation of a single grain. One sample provided the Seebeck voltage generated during melting and freezing processes. Another provided temperature data and Peltier pulsed demarcation of the interface shape for post flight analysis. The third sample provided resistance and growth velocity measurements, as well as additional thermal data. The third sample was also quenched at the end of the mission to preserve the composition of the liquid near the interface for post flight determination. A total of 450mm of directionally solidified samples were preserved for post mission structural and compositional characterization. Substantial differences were observed in the Seebeck signal between the ground-based experiments and the space-based experiments. The temperature gradient in the liquid for the ground-based experiments was significantly lower than the temperature gradient in the liquid for the space-based experiments.

Abbaschian, Reza↗
NASA NTRS2006

Solar Sail Topology Variations Due to On-Orbit Thermal Effects

The objective of this research was to predict the influence of non-uniform temperature distribution on solar sail topology and the effect of such topology variations on sail performance (thrust, torque). Specifically considered were the thermal effects due to on orbit attitude control maneuvers. Such maneuvers are expected to advance the sail to a position off-normal to the sun by as much as 35 degrees; a solar sail initially deformed by typical pre-tension and solar pressure loads may suffer significant thermally induced strains due to the non-uniform heating caused by these maneuvers. This on-orbit scenario was investigated through development of an automated analytical shape model that iterates many times between sail shape and sail temperature distribution before converging on a final coupled thermal structural affected sail topology. This model utilizes a validated geometrically non-linear finite element model and a thermal radiation subroutine. It was discovered that temperature gradients were deterministic for the off-normal solar angle cases as were thermally induced strains. Performance effects were found to be moderately significant but not as large as initially suspected. A roll torque was detected, and the sail center of pressure shifted by a distance that may influence on-orbit sail control stability.

Banik, Jeremy A.↗
NASA NTRS2019

Microbial Mats and the Search for Their Biosignatures in Deep Time and Space

Cyanobacterial mats provide insights into ancient benthic microbial communities and their biosignatures. Thick mats occupy hypersaline saltern ponds at Guerrero Negro, Baja California, Mexico. Mat biota maintains rapid rates of biogeochemical processes under steep and rapidly changing environmental gradients. Cycling of C, O, and S all increased identically with temperature, indicating the tight coupling of these cycles. An enormous microbial diversity exhibits a highly structured spatial distribution of populations.

Des Marais, David J.↗
NASA NTRS2020

Searching for Evidence of Life in Deep Time and Space

Cyanobacterial mats provide insights into ancient benthic microbial communities and their biosignatures. Thick mats occupy hypersaline saltern ponds at Guerrero Negro, Baja California, Mexico. Mat biota maintains rapid rates of biogeochemical processes under steep and rapidly changing environmental gradients. Cycling of C, O, and S all increased identically with temperature, indicating the tight coupling of these cycles. An enormous microbial diversity exhibits a highly structured spatial distribution of populations. Combined universal clone libraries from all mat layers indicated Bacteria/Archaea/Eukarya ratios of 57:7:1. More than 10,000 unique bacterial sequences were present. The relative abundance of Archaea increased with depth - below 10 cm, solvent-extractable archaeal lipids were twice as abundant as bacterial lipids. Only 15 species of Eukarya were found among 890 clones analyzed. Degradation of the mats’ insoluble macromolecular organic fraction (IMOM) by hydropyrolysis released a complex variety of linear, branched and polycyclic alkane structures, e.g., hopanes, methylhopanes and steranes. Covalent binding of these biosignatures into IMOM aids their long-term geological preservation. Mars rover missions revealed evidence of long-lived fluvial lacustrine systems and organics in associated mudstones. NASA’s Mars 2020 rover mission will examine sediments in Jezero crater, including a delta and shoreline carbonate deposits, environments that on Earth have sustained microbial mats.

Des Marais, David J.↗
DOE OSTI2017

Direct Evidence of Significant Cation Intermixing in Upconverting Core@Shell Nanocrystals: Toward a New Crystallochemical Model

Core@shell design represents an important class of architectures because of its capability to dramatically increase the absolute upconversion quantum yield (UCQY) of upconverting nanocrystals (UCNCs) but also to tune energy migration pathways. A relatively new trend towards the use of very thick optically inert shells affording significantly higher absolute UCQYs raises the question of the crystallographic and chemical characteristics of such nanocrystals (NCs). In this article, local chemical analyses performed by scanning transmission electron microscopy (STEM) combined with energy dispersive x-ray spectroscopy (EDXS) and x-ray total scattering experiments together with pair distribution function (PDF) analyses were used to probe the local chemical and structural characteristics of hexagonal β-NaGd0.78Yb0.2Er0.02F4@NaYF4 core@shell UCNCs. The investigations lead to a new crystallochemical model to describe core@shell UCNCs that considerably digresses from the commonly accepted epitaxial growth concept with sharp interfaces. The results obtained on ultra-small (4.8 ± 0.5 nm) optically active cores (β-NaGd0.78Yb0.2Er0.02F4) surrounded by an optically inert shell (NaYF4) of tunable thickness (roughly 0, 1, 2, and 3.5 nm) clearly indicate the massive dissolution of the starting seeds and the inter-diffusion of the shell element (such as Y) into the Gd/Yb/Er-containing core giving rise to the formation of a non-homogeneous solid solution characterized by concentration gradients and the lack of sharp interfaces. Independently of the inert shell thickness, core/interface/shell architectures were observed for all synthesized UCNCs. The presented results constitute a significant step towards the comprehensive understanding of the “structure - property” relationship of upconverting core@shell architectures, which is of prime interest not only in the development of more efficient structures but also to provide new physical insights at the nanoscale to better explain upconversion (UC) properties alterations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Effect of heat treatment paths on the aging and rejuvenation of metallic glasses

Here, this study explores the influence of heat treatment paths on the structural relaxation of metallic glasses (MGs) in the regime of fast dynamics. We create MG samples using various quenching rates, from 10 9 to 10 11 K/s, and expose these samples to near-T g heat treatments with assorted combinations of heating/cooling rates, from 5×10 10 to 5×10 12 K/s, and annealing durations, from 10 ps to 10 ns. Results show that the effect of the heating rate is intricately tied to the initial structure of the MG, while a decrease in the cooling rate invariably intensifies the aging process. Extending the annealing duration may induce either aging or rejuvenation, subject to the specific thermal history. To interpret these findings, we hypothesize that the memory effect, governed by the activation and annihilation of reversible and irreversible flow units, underpins the rejuvenation-aging competition in MGs. Moreover, we suggest viewing the cooling stage as an annealing phase controlled by gradient temperature and fine-tuning its rate to achieve the targeted active flow unit distributions. This study illuminates the role of fast dynamics during the glass relaxation process and offers practical strategies for tailoring heat treatments to optimize MG structures and mechanical performance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Comparing the response of the indigenous microbial community to crude oil amendment in oxic versus hypoxic conditions

The Caspian Sea is the world’s largest landlocked saline lake which lies between Europe and Asia. This region is particularly known for its large-scale oil reserves, pipelines, and drilling activities, which have contributed to the environmental decline of this lake. In addition to pollution from the petroleum industry, drainage from various river basins brings an influx of residential, industrial, and agricultural effluents that induce eutrophication and hypoxic conditions in deeper, colder waters, creating an oxygen gradient. The temperature and oxygen stratification in this environment has presented a unique opportunity to investigate the potential of the biodegradative processes carried out by the indigenous microbial community. We believe these indigenous microbes possess different metabolic capabilities to degrade oil as they adapted to declining oxygen concentrations and temperatures with increasing depths over a prolonged period. Hence, community structure and composition will vary with depth. Microcosms were set up to observe the indigenous microbial reaction after a 60 ppm native crude oil amendment over 115 days. Surface water microcosms were incubated at 28ºC and aerated while deep water microcosms were incubated at 8ºC under anaerobic conditions. These two environmental conditions represent the temperature and oxygen extremes along the gradient and were selected as we try to simulate the indigenous community’s response to this oil contamination. DNA was extracted and amplified from these microcosms and sequenced. Bioinformatic analysis was performed to track changes in the abundance of taxa present and biodiversity over different time points to show the progression of community structure. All microcosms showed the presence of hydrocarbon-degrading phyla, whose presence is consistent with other reports from oil-enriched environments. However, distinct communities were observed in oxic versus hypoxic microcosms. Orders of Bacteria related to sulfate and nitrogen cycling were found in hypoxic microcosms, indicating a possible mechanism for the anaerobic biodegradation of crude oil. GC-MS analysis of initial and final microcosms also provided evidence of degradation of hydrocarbon fractions in both warm, oxic and cold, hypoxic conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

A Gradient Based Subgrid-Scale Parameterization for Ocean Mesoscale Eddies

Mesoscale eddies play an important role in transport of heat and biogeochemical tracers in the global ocean circulation. Resolving these energetic eddies, however, is challenging in ocean general circulation models (OGCM) because it requires a horizontal grid spacing of ≲1/8° that is computationally expensive. As a result, we are required to parameterize mesoscale eddy effects on large-scale ocean flows. In this work, we introduce a new subgrid-scale (SGS) model that is developed based on a Taylor series expansion of resolved variables to parameterize subgrid mesoscale eddy transports and momentum fluxes in OGCM. We have performed an a priori study to evaluate the performance of our new gradient model using high-resolution ocean simulations. Our results show that the gradient model well predicts the actual SGS thickness fluxes in the zonal and meridional directions in coarse-resolution simulations with the grid spacing ≳1/4°. The unresolved kinetic energy at the ocean surface is also skillfully estimated. More importantly, unlike current mesoscale eddy parameterizations, which are mainly developed based on an assumption of flat bottom ocean, our new SGS model can capture the structure of unresolved standing meanders at the ocean surface. We have also developed a dynamic procedure for setting in non-dimensional parameters in our new parameterization through a non-ad hoc and tuning-free method. Overall, this work suggests that implementing the gradient model in OGCM can improve the model accuracy with an affordable computational cost in eddy-permitting and non-eddying simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

First EarthCARE CPR Observations of Dynamics–Microphysics Coupling in Marine Cold‐Air Outbreak Clouds

Marine cold-air outbreak (MCAO) clouds begin as shallow cloud streets near the ice edge and evolve into broken open-cell convection downstream. Their rapid transitions in cloud structure and microphysics are closely linked to vertical motions, but this interplay has not previously been observed from space. The EarthCARE satellite, carrying the first spaceborne Doppler radar (Cloud Profiling Radar, CPR), now measures hydrometeor sedimentation velocity and vertical air motion. Using CPR observations over the Norwegian and Barents Seas (December 2024–May 2025), we analyze MCAO and non-MCAO clouds. We find that strong updrafts in MCAO clouds coincide with larger supercooled liquid water (SLW) path (LWP). These conditions are accompanied by increases in sedimentation velocity and its vertical gradient, reflecting rapid riming-driven ice growth. In contrast, non-MCAO clouds show lower riming efficiency at similar LWP due to relatively weaker dynamical support. This emphasizes the importance of dynamics in shaping polar cloud structure and microphysics.

Kim, Jiseob [McGill Univ., Montreal, QC (Canada)] ↗