Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Uniformity of Ludwieg tube flows

Pressure and speed of sound measurements are used to obtain averaged gas properties in a Ludwieg combustion tube in which the gas is burned just prior to use. Absorption of a laser beam in the exit flow is used to check the predicted temperature uniformity. The burning process and the heat transfer to the cold walls are modeled. Interferograms of Ludwieg tube boundary layers are utilized to develop a new semiempirical boundary layer expression referred to as the integral density thickness, which is then applied to a recently developed linearized analysis of the effects of this layer. Pressure-time histories are determined for a wide range of tube flow Mach number and aspect ratio. Viscous and nonviscous effects are considered. It is shown that although the influence of the integral density thickness on the flow can be large, a modified linear theory can be used to estimate the effects for arbitrary tube flow Mach number and values of the aspect ratio that include cases where the boundary layers have merged.

Russell, D. A.↗

Time-Distance Analysis of Deep Solar Convection

Recently it was shown by Hanasoge, Duvall, and DeRosa (2010) that the upper limit to convective flows for spherical harmonic degrees l<? is considerably smaller than the flows predicted by the ASH simulations (Miesch et a7. ref) at the depth r/R=0.95 ' The deep-focusing Lime-distance technique used to develop the upper limit was applied to linear acoustic simulations of a solar interior perturbed by convective flows in order to calibrate the technique. This technique has been applied to other depths in the convection zone and the results will be presented. The deep-focusing technique has considerable sensitivity to the flow ' signals at the desired subsurface location ' However, as shown by Birch {ref}, there is remaining much sensitivity to near-surface signals. Modifications to the technique using multiple bounce signals have been examined in a search for a more refined sensitivity, or kernel function. Initial results are encouraging and results will be presented'

Duvall, T. L., Jr.↗

Linear stability analysis of a premixed flame with transverse shear

One-dimensional planar premixed flames propagating in a uniform flow are susceptible to hydrodynamic instabilities known (generically) as Darrieus–Landau instabilities. Here, we extend that hydrodynamic linear stability analysis to include a lateral shear. This generalization is a situation of interest for laminar and turbulent flames when they travel into a region of shear (such as a jet or shear layer). It is shown that the problem can be formulated and solved analytically and a dispersion relation can be determined. The solution depends on a shear parameter in addition to the wavenumber, thermal expansion ratio, and Markstein lengths. The study of the dispersion relation shows that perturbations have two types of behaviour as wavenumber increases. First, for small shear, we recover the Darrieus–Landau results except for a region at small wavenumbers, large wavelengths, that is stable. Initially, increasing shear has a stabilizing effect. But, for sufficiently high shear, the flame becomes unstable again and its most unstable wavelength can be much smaller than the Markstein length of the zero-shear flame. Lastly, the stabilizing effect of low shear can make flames with negative Markstein numbers stable within a band of wavenumbers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure analysis of turbulent liquid phase by POD and LSE techniques

In this paper, vortical structures and turbulence characteristics of liquid phase in both single liquid phase and two-phase slug flow in pipes were studied. Two dimensional velocity vector fields of liquid phase were obtained by Particle image velocimetry (PIV). Two cases were considered one single phase liquid flow at 80 l/m and second slug flow by introducing gas at 60 l/m while keeping liquid flow rate same. Proper orthogonal decomposition (POD) and Linear stochastic estimation techniques were used for the extraction of coherent structures and analysis of turbulence in liquid phase for both cases. POD has successfully revealed large energy containing structures. The time dependent POD spatial mode coefficients oscillate with high frequency for high mode numbers. The energy distribution of spatial modes was also achieved. LSE has pointed out the coherent structured for both cases and the reconstructed velocity fields are in well agreement with the instantaneous velocity fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Complexity of Nonlinear Flow and non-Fickian Transport in Fractures Driven by Three-Dimensional Recirculation Zones

Subsurface fluid flow and solute transport are typically described by first-order or linear rate laws. However, deviations from the first-order rate laws (or anomalous behavior) are typical and lead to nonlinear flow and non-Fickian transport phenomena. The shared underlying mechanisms for these “anomalous” flow and transport phenomena, which are actually typical of fractures, are seldom analyzed. We investigated the co-occurrence of nonlinear flow and non-Fickian transport through numerical simulation experiments of pore-scale flow and solute transport processes through three-dimensional natural fractures. In these fractures, 3-D recirculation zones (RZs) developed and grew with increasing flow rates. Flow nonlinearity resulted from the RZ development and growth, which shrank the main flow channel. Moreover, the same RZs also captured solutes from the main flow channel and released them back later. This retardation resulted in non-Fickian transport. Thus, nonlinear flow and non-Fickian transport are intertwined via their shared dependence on RZs.

58 GEOSCIENCES↗

On secondary and tertiary instability in electromagnetic plasma microturbulence

Zonal flows, widely accepted to be the secondary instability process leading to the nonlinear saturation of ion temperature gradient modes, are shown to grow at higher rates relative to the linear mode amplitude as the plasma pressure β is increased—thus, confirming that zonal flows become increasingly important in the turbulent dynamics at higher β. At the next level of nonlinear excitation, radial corrugations of the distribution function (zonal flow, zonal density, and zonal temperature) are demonstrated to modify linear growth rates moderately through perturbed-field, self-consistent gradients: on smaller scales, growth rates are reduced below the linear rate. In particular, excitation of kinetic ballooning modes well below their usual threshold is not to be expected under normal conditions. These findings strengthen the theory of the non-zonal transition [M. J. Pueschel et al., Phys. Rev. Lett. 110, 155005 (2013)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Unsteady flow through compressor stages

The application of the nonsteady Lax-Wendroff technique to problems with asymptotically periodic solution which offers a potentially powerful method for the investigation of the interaction of rotating and stationary blade rows in turbomachinery is reported. A technique for specifying boundary conditions with phase lag was developed to accomplish this. A complete nonlinear analysis is carried out numerically to determine the entire flow field without recourse to the assumption of small disturbances of linear equations which underlie the previous acoustic theories. The result, obtained for the case of equal number of rotor and stator blades shows that transonic flow can be handled without difficulty. In addition, the program is not limited with regard to blade thickness, camber or loading. Extension of this method to incorporate viscous wakes and to analysis of fully three dimensional configuration is feasible, and would greatly expand its utility in practical applications.

Alzner, E.↗

Measurement of turbulent flow upstream and downstream of a circular pipe bend

We measured velocity distribution in cross sections of a fully developed turbulent pipe flow upstream and downstream of a 90 degree sign bend by synchronizing two sets of a particle image velocimetry (PIV) system. Unsteady undulation of Dean vortices formed downstream from the bend was characterized by the azimuthal position of the stagnation point found on the inner and outer sides of the bend. Linear stochastic estimation was applied to capture the upstream flow field conditioned by the azimuthal location of the stagnation point downstream from the bend. When the inner-side stagnation point stayed below (above) the symmetry plane, the conditional streamwise velocity upstream from the bend exhibited high-speed streaks extended in a quasi-streamwise direction on the outer side of the curvature above (below) the symmetry plane.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simultaneous Process and Heat Exchanger Network Synthesis Using a Discrete Temperature Grid

We present mixed-integer linear programming models for utility targeting and heat exchanger network synthesis that account for variable stream temperatures and flow rates as well as unclassified streams and thus can be combined with process synthesis optimization models. By projecting temperature information onto a fixed discrete temperature grid, the model remains linear even under variable temperatures and flow rates, leading to a more tractable optimization model. The proposed model is well suited to address problems in the area of process intensification where the close interaction between different phenomena naturally leads to process synthesis problems with unclassified process streams. Several extensions are presented, including nonisothermal mixing as well as phase changes. Moreover, we show how a nonuniform grid can be adopted to reduce the complexity of the model for medium and large-size problems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solving the Unit Commitment Problem: Polyhedral Theory, Symmetry, and Power Flow

In this talk, I will give an overview of mixed integer linear programming (MILP) formulations and extensions thereof which enable the effective solution of the unit commitment problem (UC) when paired with a commercial MILP solver. First, we will place UC in context, stressing the importance of achieving a (near) optimal solution. Then we will discuss the importance of perfect and "good-enough" formulations for individual generators / market participants. Some of these formulations enable symmetry-aware reformulations for identical market participants, which can be critical when symmetry is present. Finally, we will discuss approximations of AC power flow currently used in practice, and the challenges with including these approximations within the UC formulation.

MATHEMATICS AND COMPUTING↗

Linearized blade row compression component model. Stability and frequency response analysis of a J85-3 compressor

NASA developed stability and frequency response analysis techniques were applied to a dynamic blade row compression component stability model to provide a more economic approach to surge line and frequency response determination than that provided by time-dependent methods. This blade row model was linearized and the Jacobian matrix was formed. The clean-inlet-flow stability characteristics of the compressors of two J85-13 engines were predicted by applying the alternate Routh-Hurwitz stability criterion to the Jacobian matrix. The predicted surge line agreed with the clean-inlet-flow surge line predicted by the time-dependent method to a high degree except for one engine at 94% corrected speed. No satisfactory explanation of this discrepancy was found. The frequency response of the linearized system was determined by evaluating its Laplace transfer function. The results of the linearized-frequency-response analysis agree with the time-dependent results when the time-dependent inlet total-pressure and exit-flow function amplitude boundary conditions are less than 1 percent and 3 percent, respectively. The stability analysis technique was extended to a two-sector parallel compressor model with and without interstage crossflow and predictions were carried out for total-pressure distortion extents of 180 deg, 90 deg, 60 deg, and 30 deg.

Tesch, W. A.↗

Updating prediction models by dynamical relaxation - An examination of the technique

A dynamical relaxation technique for updating prediction models is analyzed with the help of the linear and nonlinear barotropic primitive equations. It is assumed that a complete four-dimensional time history of some prescribed subset of the meteorological variables is known. The rate of adaptation of the flow variables toward the true state is determined for a linearized f-model, and for mid-latitude and equatorial beta-plane models. The results of the analysis are corroborated by numerical experiments with the nonlinear shallow-water equations.

Davies, H. C.↗

Effect of Swirl on Turbulent Structures in Supersonic Jets

Direct numerical simulation (DNS) is used to study the mechanism of generation and evolution of turbulence structures in a temporally evolving supersonic swirling round jet and also to examine the resulting acoustic radiations. Fourier spectral expansions are used in the streamwise and azimuthal directions and a 1-D b-spline Galerkin representation is used in the radial direction. Spectral-like accuracy is achieved using this numerical scheme. Direct numerical simulations, using the b-spline spectral method, are carried out starting from mean flow initial conditions which are perturbed by the most unstable linear stability eigenfunctions. It is observed that the initial.helical instability waves evolve into helical vortices which eventually breakdown into smaller scales of turbulence. 'Rib' structures similar to those seen in incompressible mixing layer flow of Rogers and Moser are observed. The jet core breakdown stage exhibits increased acoustic radiations.

Rao, Ram Mohan↗

Importance of non-flow background on the chiral magnetic wave search

We report an observable sensitive to the chiral magnetic wave (CMW) is the charge asymmetry dependence of the π - and π + anisotropic flow difference, Δv n (A ch ). We show that, due to non-flow correlations, the flow measurements by the Q-cumulant method using all charged particles as reference introduce a trivial linear term to Δv n (A ch ). The trivial slope contribution to the triangle flow difference Δv 3 (A ch ) can be negative if the non-flow is dominated by back-to-back pairs. This can explain the observed negative Δv 3 (A ch ) slope in the preliminary STAR data. We further find that the non-flow correlations give rise to additional backgrounds to the slope of Δv 2 (A ch ) from the competition among different pion sources and from the larger multiplicity dilution to π + (π - ) at positive (negative) A ch .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

BULK FLOW OF HALOS IN {Lambda}CDM SIMULATION

Analysis of the Pangu N-body simulation validates that the bulk flow of halos follows a Maxwellian distribution with variance that is consistent with the prediction of the linear theory of structure formation. We propose that the consistency between the observed bulk velocity and theories should be examined at the effective scale of the radius of a spherical top-hat window function yielding the same smoothed velocity variance in linear theory as the sample window function does. We compared some recently estimated bulk flows from observational samples with the prediction of the {Lambda}CDM model we used; some results deviate from expectation at a level of {approx}3{sigma}, but the discrepancy is not as severe as previously claimed. We show that bulk flow is only weakly correlated with the dipole of the internal mass distribution, that the alignment angle between the mass dipole and the bulk flow has a broad distribution peaked at {approx}30 Degree-Sign -50 Degree-Sign , and also that the bulk flow shows little dependence on the mass of the halos used in the estimation. In a simulation of box size 1 h {sup -1} Gpc, for a cell of radius 100 h {sup -1} Mpc the maximal bulk velocity is >500 km s{sup -1}; dipoles of the environmental mass outside the cell are not tightly aligned with the bulk flow, but are rather located randomly around it with separation angles {approx}20 Degree-Sign -40 Degree-Sign . In the fastest cell there is a slightly smaller number of low-mass halos; however, halos inside are clustered more strongly at scales {approx}> 20 h {sup -1} Mpc, which might be a significant feature since the correlation between bulk flow and halo clustering actually increases in significance beyond such scales.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlinear effects in the two-dimensional adaptive-wall outer-flow problem

The importance of nonlinear effects to the solution of two-dimensional adaptive-wall outer-flow problems is presently evaluated by comparing outer-flow solutions computed on the basis of the transonic small perturbation equations with solutions based on the linear Prandtl-Glauert equation. Both methods are applied to simulated measurements of transonic flow past a two-dimensional airfoil in free air. Nonlinear effects are found to be important in the outer-flow solution only where the outer flow included supersonic flow.

Schairer, Edward T.↗

A Study of Grid Resolution, Transition and Turbulence Model Using the Transonic Simple Straked Delta Wing

Three-dimensional transonic flow over a delta wing is investigated using several turbulence models. The performance of linear eddy viscosity models and an explicit algebraic stress model is assessed at the start of vortex flow, and the results compared with experimental data. To assess the effect of transition location, computations that either fix transition aft of the leading edge or are fully turbulent are performed. These computations show that grid resolution, transition location and turbulence model significantly affect the 3D flowfield.

Bartels, Robert E.↗

Heat Transfer in Complex Fluids

Amongst the most important constitutive relations in Mechanics, when characterizing the behavior of complex materials, one can identify the stress tensor T, the heat flux vector q (related to heat conduction) and the radiant heating (related to the radiation term in the energy equation). Of course, the expression 'complex materials' is not new. In fact, at least since the publication of the paper by Rivlin & Ericksen (1955), who discussed fluids of complexity (Truesdell & Noll, 1992), to the recently published books (Deshpande et al., 2010), the term complex fluids refers in general to fluid-like materials whose response, namely the stress tensor, is 'non-linear' in some fashion. This non-linearity can manifest itself in variety of forms such as memory effects, yield stress, creep or relaxation, normal-stress differences, etc. The emphasis in this chapter, while focusing on the constitutive modeling of complex fluids, is on granular materials (such as coal) and non-linear fluids (such as coal-slurries). One of the main areas of interest in energy related processes, such as power plants, atomization, alternative fuels, etc., is the use of slurries, specifically coal-water or coal-oil slurries, as the primary fuel. Some studies indicate that the viscosity of coal-water mixtures depends not only on the volume fraction of solids, and the mean size and the size distribution of the coal, but also on the shear rate, since the slurry behaves as shear-rate dependent fluid. There are also studies which indicate that preheating the fuel results in better performance, and as a result of such heating, the viscosity changes. Constitutive modeling of these non-linear fluids, commonly referred to as non-Newtonian fluids, has received much attention. Most of the naturally occurring and synthetic fluids are non-linear fluids, for example, polymer melts, suspensions, blood, coal-water slurries, drilling fluids, mud, etc. It should be noted that sometimes these fluids show Newtonian (linear) behavior for a given range of parameters or geometries; there are many empirical or semi-empirical constitutive equations suggested for these fluids. There have also been many non-linear constitutive relations which have been derived based on the techniques of continuum mechanics. The non-linearities oftentimes appear due to higher gradient terms or time derivatives. When thermal and or chemical effects are also important, the (coupled) momentum and energy equations can give rise to a variety of interesting problems, such as instability, for example the phenomenon of double-diffusive convection in a fluid layer. In Conclusion, we have studied the flow of a compressible (density gradient type) non-linear fluid down an inclined plane, subject to radiation boundary condition. The heat transfer is also considered where a source term, similar to the Arrhenius type reaction, is included. The non-dimensional forms of the equations are solved numerically and the competing effects of conduction, dissipation, heat generation and radiation are discussed. It is observed that the velocity increases rapidly in the region near the inclined surface and is slower in the region near the free surface. Since R{sub 7} is a measure of the heat generation due to chemical reaction, when the reaction is frozen (R{sub 7}=0.0) the temperature distributions would depend only on R{sub 1}, and R{sub 2}, representing the effects of the pressure force developed in the material due to the distribution, R{sub 3} and R{sub 4} viscous dissipation, R{sub 5} the normal stress coefficient, R{sub 6} the measure of the emissivity of the particles to the thermal conductivity, etc. When the flow is not frozen (RP{sub 7} > 0) the temperature inside the flow domain is much higher than those at the inclined and free surfaces. As a result, heat is transferred away from the flow toward both the inclined surface and the free surface with a rate that increases as R{sub 7} increases. For a given temperature, an increase in {zeta} implies that the activation energy is smaller and thus, the reaction rate is increased leading to an increase in the heat of the reaction. As a result the flow is chemically heated and its temperature increase. The results shown here indicate that for all values of {zeta} used the chemical effects are significant and the temperature is always higher than both the surface temperature and the free surface temperature. The heat transfer is always from the flow toward both the inclined surface and the free stream. It is also noticed that for all values of m chosen in this study, the temperature is higher than the surface and the free stream temperature. The heat transfer at the inclined surface and at the free stream increase slowly for negative values of m to about m=0.5, but it begins to significantly increase for m greater than 0.5.

01 COAL, LIGNITE, AND PEAT↗