Search NASA⌕ Search

SEARCH · Search NASA

Results for “model structural error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Ab initio nucleon-nucleus elastic scattering with chiral effective field theory uncertainties

Effective interactions for nucleon-nucleus elastic scattering from first principles require the use of the same nucleon-nucleon interaction in the structure and reaction calculations and a consistent treatment of the relevant operators at each order. Systematic investigations of the effect of truncation uncertainties of chiral nucleon-nucleon ( N N ) forces have been carried out for scattering observables in the two- and three-nucleons system as well as for bound-state properties of light nuclei. Here we extend this type of study to proton and neutron elastic scattering for 16 O and 12 C. Using the frameworks of the spectator expansion of multiple scattering theory as well as the no-core shell model, we employ one specific chiral interaction from the LENPIC collaboration and consistently calculate the leading-order effective nucleon-nucleus interaction up to the third chiral order, from which we extract elastic scattering observables. Then we apply pointwise as well as correlated uncertainty quantification for the estimation of the chiral truncation error. We calculate and analyze proton elastic scattering observables for 16 O and 12 C as well as neutron elastic scattering observables for 12 C between 65 and 185 MeV projectile kinetic energy. We find in all cases qualitatively similar results for the chiral truncation uncertainties as in few-body systems and assess them using similar diagnostic tools. The order-by-order convergence of the scattering observables for 16 O and 12 C is very reasonable around 100 MeV, while for higher energies the chiral expansion parameter becomes too large for convergence. Comparing proton and neutron differential cross sections reveals that their description is comparable up to around 100 MeV. Here, we also find a nearly perfect correlation between the differential cross section for neutron scattering and the N N Wolfenstein amplitudes for small momentum transfers. The diagnostic tools for studying order-by-order convergence in observables in few-body systems can be employed for observables in nucleon-nucleus scattering with only minor modifications provided the momentum scale in the problems is not too large. We also find that the chiral N N interaction on which our study is based gives a very good description of differential cross sections for 16 O and 12 C as low as 65-MeV projectile energy, particularly in the forward direction. In addition, the very forward direction of the neutron differential cross section mirrors the behavior of the N N interaction amazingly well.

6 ≤ A ≤ 19↗
DOE OSTI2019

Relativistic Modeling of Ultra-Short Electron Pulse Propagation

The ultrafast electron microscopy, electron diffraction, electron crystallography, and nanocrystallography methods opened the possibility of studying the coherent structural dynamics of matter. The time resolution of the ultrafast electron microscopy and electron diffraction methods determined by the duration of electron pulses is the key parameter of experimental setups. This paper treats electron pulse dynamics in the field free drift region specifically for applications in atomic imaging. The electron beam is modeled as a system of particles (N) with N = 1000 and N = 10 000 electrons. The beam propagates for a certain period of time (1–4 ns); during its propagation, electron distribution parameters (over coordinates and velocities) are calculated to characterize the temporal profile and uncertainty in the electron wavelength at the sample. The results of applying relativistic dynamic equations show that nonrelativistic results are satisfactorily applicable (with 15 per cent or better accuracy) for modeling short electron pulse elongation and broadening at 30 keV and lower energies. However, the results of such modeling may be significantly in error for intermediate energies (300 keV), and for the fast relativistic beams (3 MeV) they become completely wrong. The relative reduction in Coulomb repulsion effects at higher energies is known, however; we give a comprehensive treatment that allows a quantitative picture. Using high-energy electron pulses results in almost complete elimination of the repulsive Coulomb effect. Dispersion of electron velocities becomes much lower at higher energies. For 3 MeV electrons, electron pulse duration as well as its radius does not noticeably change even after traveling for 4 ns (1.2 m). Even at 300 keV, the pulse duration increase is negligible until 1 ns (0.2 m). A simple mean-field model suggested in [13] has been extended to arbitrarily fast relativistic electron pulses with good correspondence to direct dynamic modeling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

MFNets: data efficient all-at-once learning of multifidelity surrogates as directed networks of information sources

We present an approach for constructing a surrogate from ensembles of information sources of varying cost and accuracy. The multifidelity surrogate encodes connections between information sources as a directed acyclic graph, and is trained via gradient-based minimization of a nonlinear least squares objective. While the vast majority of state-of-the-art assumes hierarchical connections between information sources, our approach works with flexibly structured information sources that may not admit a strict hierarchy. The formulation has two advantages: (1) increased data efficiency due to parsimonious multifidelity networks that can be tailored to the application; and (2) no constraints on the training data—we can combine noisy, non-nested evaluations of the information sources. Finally, numerical examples ranging from synthetic to physics-based computational mechanics simulations indicate the error in our approach can be orders-of-magnitude smaller, particularly in the low-data regime, than single-fidelity and hierarchical multifidelity approaches.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2020

Comparison of Surface Fluxes Derived from CYGNSS and Simulated by WRF Model: An MJO Case Study

This study focuses on ocean surface fluxes, mainly the latent heat flux, and their impact on MJO propagation and associated precipitation structures over the Indian Ocean and Maritime Continent. The Coupled-Ocean-Atmosphere-Wave-Sediment Transport (COAWST) model is used to simulate two MJO events during the 2017-2018 season: the December 10 - January 20, 2017 case, which maintained its strong precipitation signal over the Maritime Continent, and the March 1 - 20, 2018 case, which was weaker and did not propagate through the Maritime Continent. Both simulated MJO events show positive biases in surface rainfall compared with GPM IMERG data. During the MJO suppressed phase, the simulations rain more often than the observations. During the active phase, the westward propagating precipitation structures are more organized and much stronger compared with the observations, sometimes forming westward propagating cyclones that weakened the eastward precipitation signals. Two aspects of the surface flux interactions are investigated: the impact of the domain mean surface fluxes, and the impact of storm scale circulations and their interactions with local surface fluxes. Both aspects affect water vapor budget, atmosphere instability and mean flow, through which convection initiation, organization, and propagation are influenced. Model sensitivity tests with different radiation, microphysics, PBL schemes and nudging schemes indicate that in the control simulations, higher SST and surface fluxes, especially during the suppressed period, are the main reason of rainfall overestimation compared with IMERG data. The strong westward propagating signals are caused by both increased atmosphere instability and reduced mean wind shear. Unfortunately, the small differences in mean SST and surface fluxes between different model sensitivity tests are all within the satellite observation error margin, and cannot be directly corroborated by observations. One of the advantages of CYGNSS satellites is that they observe ocean surface wind and heat fluxes underneath strong rainfall events such as the convective systems associated with MJO active phases. Currently we are comparing CYGNSS level 2 surface fluxes retrievals and the model simulations in order to better understand the second aspect of the MJO and surface fluxes interactions, and how this affects MJO strengths and propagations. The interactive atmosphere-ocean-wave model also provides cases that directly comparing satellite observables (the bistatic radar cross section) and the model simulations (through CYGNSS satellite simulator). These discrepancies are more prominent in coupled ocean simulations, mainly due to higher SST and enhanced surface fluxes.

Li, Xiaowen↗
NASA NTRS1995

Can standard cosmological models explain the observed Abell cluster bulk flow?

Lauer and Postman (LP) observed that all Abell clusters with redshifts less than 15,000 km/s appear to be participating in a bulk flow of 689 km/s with respect to the cosmic microwave background. We find this result difficult to reconcile with all popular models for large-scale structure formation that assume Gaussian initial conditions. This conclusion is based on Monte Carlo realizations of the LP data, drawn from large particle-mesh N-body simulations for six different models of the initial power spectrum (standard, tilted, and Omega(sub 0) = 0.3 cold dark matter, and two variants of the primordial baryon isocurvature model). We have taken special care to treat properly the longest-wavelength components of the power spectra. The simulations are sampled, 'observed,' and analyzed as identically as possible to the LP cluster sample. Large-scale bulk flows as measured from clusters in the simulations are in excellent agreement with those measured from the grid: the clusters do not exhibit any strong velocity bias on large scales. Bulk flows with amplitude as large as that reported by LP are not uncommon in the Monte Carlo data stes; the distribution of measured bulk flows before error bias subtraction is rougly Maxwellian, with a peak around 400 km/s. However the chi squared of the observed bulk flow, taking into account the anisotropy of the error ellipsoid, is much more difficult to match in the simulations. The models examined are ruled out at confidence levels between 94% and 98%.

Strauss, Michael A.↗
NASA NTRS2019

Solar Activity Modeling: From Subgranular Dynamical Scales to the Solar Cycles

Dynamical effects of solar magnetoconvection span a wide range spatial and temporal scales that extends from the interior to the corona and from fast turbulent motions to the global-Sun magnetic activity. To study the solar activity on short temporal scales (from minutes to hours), we use 3D radiative MHD simulations that allow us to investigate complex turbulent interactions that drive various phenomena, such as plasma eruptions, spontaneous formation of magnetic structures, funnel-like structures and magnetic loops in the corona, and others. In particular, we focus on multi-scale processes of energy exchange across the different layers, which contribute to the corona heating and eruptive dynamics, as well as interlinks between different layers of the solar interior and atmosphere. For modeling the global-scale activity we use the data assimilation approach that has demonstrated great potential for building reliable long-term forecasts of solar activity. In particular, it has been shown that the Ensemble Kalman Filter (EnKF) method applied to the Parker-Kleeorin-Ruzmakin dynamo model is capable of predicting solar activity up to one sunspot cycle ahead in time, as well as estimating the properties of the next cycle a few years before it begins. In this presentation, using the available magnetogram data, we discuss development of the methodology and forecast quality criteria (including forecast uncertainties and sources of errors). We demonstrate the influence of observational limitation on the prediction accuracy. We present the EnKF predictions of the upcoming Solar Cycle 25 based on both the sunspot number series and observed magnetic fields, and discuss the uncertainties and potential of the data assimilation approach for modeling and forecasting the solar activity.

Kitiashvili, I. N.↗
NASA NTRS2019

Numerical Investigation and Optimization of a Flushwall Injector for Scramjet Applications at Hypervelocity Flow Conditions

An investigation utilizing Reynolds-averaged simulations (RAS) was performed in order to demonstrate the use of design and analysis of computer experiments (DACE) methods in Sandia’s DAKOTA software package for surrogate modeling and optimization. These methods were applied to a flow- path fueled with an interdigitated flushwall injector suitable for scramjet applications at hyper- velocity conditions and ascending along a constant dynamic pressure flight trajectory. The flight Mach number, duct height, spanwise width, and injection angle were the design variables selected to maximize two objective functions: the thrust potential and combustion efficiency. Because the RAS of this case are computationally expensive, surrogate models are used for optimization. To build a surrogate model a RAS database is created. The sequence of the design variables comprising the database were generated using a Latin hypercube sampling (LHS) method. A methodology was also developed to automatically build geometries and generate structured grids for each design point. The ensuing RAS analysis generated the simulation database from which the two objective functions were computed using a one-dimensionalization (1D) of the three-dimensional simulation data. The data were fitted using four surrogate models: an artificial neural network (ANN), a cubic polynomial, a quadratic polynomial, and a Kriging model. Variance-based decomposition showed that both objective functions were primarily driven by changes in the duct height. Multiobjective design optimization was performed for all four surrogate models via a genetic algorithm method. Optimal solutions were obtained at the upper and lower bounds of the flight Mach number range. The Kriging model predicted an optimal solution set that exhibited high values for both objective functions. Additionally, three challenge points were selected to assess the designs on the Pareto fronts. Further sampling among the designs of the Pareto fronts may be required to lower the surrogate model errors and perform more accurate surrogate-model-based optimization.

Shenoy, Rajiv R.↗
NASA NTRS1994

Eddy current correction in volume-localized MR spectroscopy

The quality of volume-localized magnetic resonance spectroscopy is affected by eddy currents caused by gradient switching. Eddy currents can be reduced with improved gradient systems; however, it has been suggested that the distortion due to eddy currents can be compensated for during postprocessing with a single-frequency reference signal. The authors propose modifying current techniques for acquiring the single-frequency reference signal by using relaxation weighting to reduce interference from components that cannot be eliminated by digital filtering alone. Additional sequences with T1 or T2 weighting for reference signal acquisition are shown to have the same eddy current characteristics as the original signal without relaxation weighting. The authors also studied a new eddy current correction method that does not require a single-frequency reference signal. This method uses two free induction decays (FIDs) collected from the same volume with two sequences with opposite gradients. Phase errors caused by eddy currents are opposite in these two FIDs and can be canceled completely by combining the FIDs. These methods were tested in a phantom. Eddy current distortions were corrected, allowing quantitative measurement of structures such as the -CH = CH- component, which is otherwise undetectable.

NASA Discipline Musculoskeletal↗
DOE OSTI2023

Impact of Seasonal Snow-Cover Change on the Observed and Simulated State of the Atmospheric Boundary Layer in a High-Altitude Mountain Valley

The structure and evolution of the atmospheric boundary layer (ABL) under clear-sky fair weather conditions over mountainous terrain is dominated by the diurnal cycle of the surface energy balance and thus strongly depends on surface snow cover. We use data from three passive ground-based infrared spectrometers deployed in the East River Valley in Colorado's Rocky Mountains to investigate the response of the thermal ABL structure to changes in surface energy balance during the seasonal transition from low to high snow cover. Temperature profiles were retrieved from the infrared radiances using the optimal estimation physical retrieval Tropospheric Remotely Observed Profiling via Optimal Estimation. A nocturnal surface inversion formed in the valley during clear-sky days, which was subsequently mixed out during daytime with the development of a convective boundary layer when snow cover was low. Over high snow cover, a very shallow convective boundary layer formed, above which the inversion persisted through the daytime hours. We compare these observations to NOAA's operational High-Resolution-Rapid-Refresh model and find large warm biases on clear-sky days resulting from the model's inability to form strong nocturnal inversions and to maintain the stable stratification in the valley during daytime when there was snow on the ground. We suggest several factors contributing to the large model errors. These are (a) the inability of the model to represent well-developed thermally driven flows likely due to the too coarse horizontal grid spacing (3 km), (b) too much convective mixing during daytime, and (c) too strong vertical coupling between the valley atmosphere and the free troposphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Modeling land use and land cover change: using a hindcast to estimate economic parameters in gcamland v2.0

Abstract. Future changes in land use and cover have important implications for agriculture, energy, water use, and climate. Estimates of future land use and land cover differ significantly across economic models as a result of differences in drivers, model structure, and model parameters; however, these models often rely on heuristics to determine model parameters. In this study, we demonstrate a more systematic and empirically based approach to estimating a few key parameters for an economic model of land use and land cover change, gcamland. Specifically, we generate a large set of model parameter perturbations for the selected parameters and run gcamland simulations with these parameter sets over the historical period in the United States to quantify land use and land cover, determine how well the model reproduces observations, and identify parameter combinations that best replicate observations, assuming other model parameters are fixed. We also test alternate methods for forming expectations about uncertain crop yields and prices, including adaptive, perfect, linear, and hybrid approaches. In particular, we estimate parameters for six parameters used in the formation of expectations and three of seven logit exponents for the USA only. We find that an adaptive expectation approach minimizes the error between simulated outputs and observations, with parameters that suggest that for most crops, landowners put a significant weight on previous information. Interestingly, for corn, where ethanol policies have led to a rapid growth in demand, the resulting parameters show that a larger weight is placed on more recent information. We examine the change in model parameters as the metric of model error changes, finding that the measure of model fitness affects the choice of parameter sets. Finally, we discuss how the methodology and results used in this study could be used for other regions or economic models to improve projections of future land use and land cover change.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1995

Advanced Payload Transfer Measurement System (APT-MS) Mechanical Features

During the last two feet or so of transfer, for a large or heavy payload to its restraining fixture, the consequences of unplanned contact (or impact) between payload and support structure can range from merely annoying to something approaching disaster. Current transfer methods employ technicians with meter sticks stationed at the various hold-down locations to estimate the distances to contact. This information is communicated orally to the crane operator. It is understandable that this work proceeds carefully and therefore slowly. The objectives of this study are (1) to explore mechanical sources of measurement error; and (2) to develop an improved prototype design that is compact, inexpensive, and addresses the measurement error issues. APT is a relatively inexpensive electro-mechanical device that reduces both time and manpower required to make shuttle payload transfers. APT measurement system would provide a GUI for the 'move-conductor' (crane operator) so he could see the displacements of all hold-down interfaces as they move together and thus have a more accurate, comprehensive and 'real-time' picture of the engagement activity. An error model attempts to include all estimatable sources of mechanical error and design features were introduced to reduce or eliminate major sources of error.

Brewer, William V.↗
DOE OSTI2016

TREAT Neutronics Analysis and Design Support, Part II: Multi-SERTTA-CAL

Experiment vehicle design is necessary in preparation for Transient Reactor Test (TREAT) facility restart and the resumption of transient testing to support Accident Tolerant Fuel (ATF) characterization and other future fuels testing requirements. Currently the most mature vehicle design is the Multi-SERTTA (Static Environments Rodlet Transient Test Apparatuses), which can accommodate up to four concurrent rodlet-sized specimens under separate environmental conditions. Robust test vehicle design requires neutronics analyses to support design development, optimization of the power coupling factor (PCF) to efficiently maximize energy generation in the test fuel rodlets, and experiment safety analyses. In integral aspect of prior TREAT transient testing was the incorporation of calibration experiments to experimentally evaluate and validate test conditions in preparation of the actual fuel testing. The calibration experiment package established the test parameter conditions to support fine-tuning of the computational models to deliver the required energy deposition to the fuel samples. The calibration vehicle was designed to be as near neutronically equivalent to the experiment vehicle as possible to minimize errors between the calibration and final tests. The Multi-SERTTA-CAL vehicle was designed to serve as the calibration vehicle supporting Multi-SERTTA experimentation. Models of the Multi-SERTTA-CAL vehicle containing typical PWR-fuel rodlets were prepared and neutronics calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries; these results were then compared against those performed for Multi-SERTTA to determine the similarity and possible design modification necessary prior to construction of these experiment vehicles. The estimated reactivity insertion worth into the TREAT core is very similar between the two vehicle designs, with the primary physical difference being a hollow Inconel tube running down the length of the calibration vehicle. Calculations of PCF indicate that on average there is a reduction of approximately 6.3 and 12.6%, respectively, for PWR fuel rodlets irradiated under wet and dry conditions. Changes to the primary or secondary vessel structure in the calibration vehicle can be performed to offset this discrepancy and maintain neutronic equivalency. Current possible modifications to the calibration vehicle include reduction of the primary vessel wall thickness, swapping Zircaloy-4 for stainless steel 316 in the secondary containment, or slight modification to the temperature and pressure of the water environment within the primary vessel. Removal of some of the instrumentation within the calibration vehicle can also serve to slightly increase the PCF. Future efforts include further modification and optimization of the Multi-SERTTA and Multi-SERTTA-CAL designs in preparation of actual TREAT transient testing. Experimental results from both test vehicles will be compared against calculational results and methods to provide validation and support additional neutronics analyses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Dielectric-barrier-discharge plasma-assisted hydrogen diffusion flame. Part 1: Temperature, oxygen, and fuel measurements by one-dimensional fs/ps rotational CARS imaging

One-dimensional hybrid fs/ps CARS imaging provides single-laser-shot measurements of temperature, oxygen, and hydrogen in a plasma-assisted hydrogen diffusion flame. The coaxial dielectric-barrier-discharge burner collapses the Re ~50 hydrogen diffusion flame to within ~5 mm of the burner surface at an applied AC potential of 8.75 kV at 18 kHz, coinciding nicely with the full spatial extent of the 1D CARS measurements. Translating the burner through the measurement volume allowed for measurements at numerous radial locations in increments of 1 mm with a resolution of 140 µm × 30 µm × 600 µm, sufficient to resolve spatial gradients in this unsteady flame. Longer probe delays, required for improved dynamic range in regions of high temperature fluctuations, proved difficult to model as a result of a nontrivial decay in the O 2 Raman coherence arising from complexities associated with the triplet ground electronic state of the O 2 molecule. Oxygen linewidths were treated empirically using the observed O 2 coherence decay in spectra acquired from the product gases of lean, near-adiabatic H 2 /air flames stabilized on a Hencken flat-flame burner. While still leading to errors up to 10% at worst, the empirically determined Raman linewidth factors eliminated any systematic error in the O 2 /N 2 measurements with probe delay. Temperature measurements in the Hencken Burner flames proved to be insensitive to probe pulse delay, providing robust thermometry. Here, demonstration of this technique in both the canonical Hencken burner flames and a new DBD burner validates its effectiveness in producing multiple spatially resolved measurements in combustion environments. Measurements in the DBD burner revealed an unsteady, counterflow flattened flame structure near the fuel orifice which became unsteady as the reaction zone curves towards the surface for larger radial positions. Lastly, fluctuations in the fuel concentration were largest at the source, as the large, plasma-generated, unsteady external toroidal vortex that dominates the transport in this flame provides enhanced ventilation of the flame surface in close proximity to the fuel tube.

42 ENGINEERING↗
DOE OSTI2023

A Consistent Representation of Cloud Overlap and Cloud Subgrid Vertical Heterogeneity

Many global climate models underestimate the cloud cover and overestimate the cloud albedo, especially for low-level clouds. We determine how a correct representation of the vertical structure of clouds can fix part of this bias. We use the 1D McICA framework and focus on low-level clouds. Using Large Eddy Simulations results as reference, we propose a method based on exponential-random overlap that represents the cloud overlap between layers and the subgrid cloud properties over several vertical scales, with a single value of the overlap parameter. Starting from a coarse vertical grid, representative of atmospheric models, this algorithm is used to generate the vertical profile of the cloud fraction with a finer vertical resolution, or to generate it on the coarse grid but with subgrid heterogeneity and cloud overlap that ensures a correct cloud cover. Doing so we find decorrelation lengths are dependent on the vertical resolution, except if the vertical subgrid heterogeneity and interlayer overlap are taken into account coherently. We confirm that the frequently used maximum-random overlap leads to a significant error by underestimating the low-level cloud cover with a relative error of about 50%, that can lead to an error of SW cloud albedo as big as 70%. Not taking into account the subgrid vertical heterogeneity of clouds can cause a relative error of 20% in brightness, assuming the cloud cover is correct.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The Atacama Cosmology Telescope: DR6 constraints on extended cosmological models

We use new cosmic microwave background (CMB) primary temperature and polarization anisotropy measurements from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) to test foundational assumptions of the standard cosmological model, ΛCDM, and set constraints on extensions to it. We derive constraints from the ACT DR6 power spectra alone, as well as in combination with legacy data from the Planck mission. To break geometric degeneracies, we include ACT and Planck CMB lensing data and baryon acoustic oscillation data from DESI Year-1. To test the dependence of our results on non-ACT data, we also explore combinations replacing Planck with WMAP and DESI with BOSS, and further add supernovae measurements from Pantheon+ for models that affect the late-time expansion history. We verify the near-scale-invariance (running of the spectral index dn s /d ln k = 0.0062 ± 0.0052) and adiabaticity of the primordial perturbations. Neutrino properties are consistent with Standard Model predictions: we find no evidence for new light, relativistic species that are free-streaming (N eff = 2.86 ± 0.13, which combined with astrophysical measurements of primordial helium and deuterium abundances becomes N eff = 2.89 ± 0.11), for non-zero neutrino masses (∑m ν < 0.089 eV at 95% CL), or for neutrino self-interactions. We also find no evidence for self-interacting dark radiation (N idr < 0.134), or for early-universe variation of fundamental constants, including the fine-structure constant (α EM /α EM,0 = 1.0043 ± 0.0017) and the electron mass (m e /m e,0 = 1.0063 ± 0.0056). Our data are consistent with standard big bang nucleosynthesis (we find Y p = 0.2312 ± 0.0092), the COBE/FIRAS-inferred CMB temperature (we find T CMB = 2.698 ± 0.016 K), a dark matter component that is collisionless and with only a small fraction allowed as axion-like particles, a cosmological constant (w = -0.986 ± 0.025), and the late-time growth rate predicted by general relativity (γ = 0.663 ± 0.052). We find no statistically significant preference for a departure from the baseline ΛCDM model. In fits to models invoking early dark energy, primordial magnetic fields, or an arbitrary modified recombination history, we find H 0 = 69.9 +0.8 -1.5 , 69.1 ± 0.5, or 69.6 ± 1.0 km/s/Mpc, respectively; using BOSS instead of DESI BAO data reduces the central values of these constraints by 1–1.5 km/s/Mpc while only slightly increasing the error bars. In general, models introduced to increase the Hubble constant or to decrease the amplitude of density fluctuations inferred from the primary CMB are not favored over ΛCDM by our data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Periodic GFN1-xTB Tight Binding: A Generalized Ewald Partitioning Scheme for the Klopman–Ohno Function

A novel formulation is presented for the treatment of electrostatics in the periodic GFN1-xTB tight-binding model. Periodic GFN1-xTB is hindered by the functional form of the second-order electrostatics, which only recovers Coulombic behavior at large interatomic distances and lacks a closed-form solution for its Fourier transform. We address this by introducing a binomial expansion of the Klopman–Ohno function to partition short- and long-range interactions, enabling the use of a generalized Ewald summation for the solution of the electrostatic energy. This approach is general and is applicable to any damped potential of the form |R n + c| –m . Benchmarks on the X23 molecular crystal dataset and a range of prototypical bulk semiconductors demonstrate that this systematic treatment of the electrostatics eliminates unphysical behavior in the equation of state curves. In the bulk systems studied, we observe a mean absolute error in total energy of 35 meV/atom, comparable to the machine-learned universal force field, M3GNet, and sufficiently precise for structure relaxation. These results highlight the promising potential of GFN1-xTB as a universal tight-binding parametrization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quantum algorithms from fluctuation theorems: Thermal-state preparation

Fluctuation theorems provide a correspondence between properties of quantum systems in thermal equilibrium and a work distribution arising in a non-equilibrium process that connects two quantum systems with Hamiltonians H 0 and H 1 = H 0 + V. Building upon these theorems, we present a quantum algorithm to prepare a purification of the thermal state of H 1 at inverse temperature β ≥ 0 starting from a purification of the thermal state of H 0 . The complexity of the quantum algorithm, given by the number of uses of certain unitaries, is $\mathcal{O}$ (e β(ΔA - w l )/2 ), where ΔA is the free-energy difference between H 1 and H 0 , and w l is a work cutoff that depends on the properties of the work distribution and the approximation error ϵ > 0. If the non-equilibrium process is trivial, this complexity is exponential i β∥V∥, where ∥V∥ is the spectral norm of V. This represents a significant improvement of prior quantum algorithms that have complexity exponential in β∥H 1 ∥ in the regime where ∥V∥$\ll$ ∥H 1 ∥. The dependence of the complexity in ϵ varies according to the structure of the quantum systems. It can be exponential in 1/ϵ in general, but we show it to be sublinear in 1/ϵ if H 0 and H 1 commute, or polynomial in 1/ϵ if H 0 and H 1 are local spin systems. The possibility of applying a unitary that drives the system out of equilibrium allows one to increase the value of w l and improve the complexity even further. To this end, we analyze the complexity for preparing the thermal state of the transverse field Ising model using different non-equilibrium unitary processes and see significant complexity improvements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗