Search NASA⌕ Search

SEARCH · Search NASA

Results for “pilot development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Development of an optical flameout detection system for High Temperature Wind Tunnels

This paper outlines the design and development of a flameout detection system for future use in the 8-Foot High Temperature Wind Tunnel (8' HTT) at the NASA Langley Research Center. The proposed system is required to function reliably in an oxidizing environment with pressures up to 28 MPa (4,000 psi), survive temperatures reaching 1700 C (3100 F), and respond with a shut-down signal upon flameout in less than 100 milliseconds. The 7-Inch High Temperature Pilot Tunnel (7" HTT), a one-twelfth scale version of the 8' HTT, was used to develop a prototype system and to obtain data on the spectral content of the flame during combustion. The design and development of the spectral data acquisition system for the 7" HTT is presented here.

Borg, Stephen E.↗
NASA NTRS1993

Heat pipe cooled heat rejection subsystem modelling for nuclear electric propulsion

NASA LeRC is currently developing a FORTRAN based computer model of a complete nuclear electric propulsion (NEP) vehicle that can be used for piloted and cargo missions to the Moon or Mars. Proposed designs feature either a Brayton or a K-Rankine power conversion cycle to drive a turbine coupled with rotary alternators. Both ion and magnetoplasmodynamic (MPD) thrusters will be considered in the model. In support of the NEP model, Rocketdyne is developing power conversion, heat rejection, and power management and distribution (PMAD) subroutines. The subroutines will be incorporated into the NEP vehicle model which will be written by NASA LeRC. The purpose is to document the heat pipe cooled heat rejection subsystem model and its supporting subroutines. The heat pipe cooled heat rejection subsystem model is designed to provide estimate of the mass and performance of the equipment used to reject heat from Brayton and Rankine cycle power conversion systems. The subroutine models the ductwork and heat pipe cooled manifold for a gas cooled Brayton; the heat sink heat exchanger, liquid loop piping, expansion compensator, pump and manifold for a liquid loop cooled Brayton; and a shear flow condenser for a K-Rankine system. In each case, the final heat rejection is made by way of a heat pipe radiator. The radiator is sized to reject the amount of heat necessary.

Moriarty, Michael P.↗
DOE OSTI2017

Innovative Patient Room Lighting System with Integrated Spectrally Adaptive Control

In December of 2013, the U.S. Department of Energy’s SSL R&D Program released a Funding Opportunity Announcement (FOA), that for the first time, contained opportunities for comprehensive application-specific system development. The FOA included opportunities for two applications, one of which was a Patient Room. Philips Lighting Research North America, submitted a proposal for the Patient Room application, and was selected for the complete project award. The award amount was for $497,127, with a Philips Research co-funding commitment 165,709 dollars. The total project value was 662,836 dollars. This project sought to redefine lighting for the patient room application. The goal was to deliver an innovative LED patient suite (patient room and bathroom) lighting system solution that was 40% more energy-efficient than traditional fluorescent incumbent technologies, and would meet all the visual and non-visual needs of patients, caregivers and visitors, and improve the patient experience. State-of-the-art multichannel LED platforms and control technologies that would provide spectral tuning and become part of an intelligent, connected lighting system drove the solution. The project was scoped into four main task areas that included a) System Concept Creation, b) Identification of the Luminaire Portfolio, c) Development of the Connected Lighting Infrastructure, and d) System Performance Validation. Each of the four main tasks were completed and validated extensively over the course the 2 ½ year project. The system concept was created by first developing a lighting design that demonstrated best practices for patient room lighting – illuminance and uniformity for task performance, reduced glare, and convenient controls, in addition to giving patients control over the lighting in their environment. A framework was defined to deliver circadian support via software behaviors. Through that process luminaires were identified from the Philips portfolio that were adaptable – by their form, dimensions, and optical materials – to mix multicolor LED platforms uniformly and deliver target design lumen levels. The Blue Sky luminaire was selected for the patient bed area to give the illusion of skylight while providing white light on the patient bed. Luminaires used existing 2-channel tunable white LED boards, and newly developed 4-channel LED boards. Red-Orange, Blue, Green, and Blue-shifted Yellow LED chips were selected based on spectral characteristics and their ability to produce high quality white light. 4-channel Power over Ethernet (PoE) drivers were developed and firmware written so they would communicate with both 2- and 4-channel boards. These components formed the backbone of the connected lighting infrastructure. Software, flexible and nuanced in its complexity, was written to set behaviors for myriad lighting scenes in the room throughout the 24 hour day – and all could be overridden by manual controls. This included a dynamic tunable white program, three color changing automatic programs that simulated degrees of sunrise to sunset palettes, and an amber night lighting system that offered visual cues for postural stability to minimize the risk of falls. All programs were carefully designed to provide visual comfort for all occupants, support critical task performance for staff, and to support the patient’s 24hr rhythms. A full scale mockup room was constructed in the Philips Cambridge Lab. The lighting system was installed, tested and functionality demonstrated to ensure smooth operation of system components – luminaires, drivers, PoE switches, wall controls, patient remote, and daylight and occupancy sensors. How did the system perform? It met visual criteria, confirmed by calculations, simulations and measurements in the field. It met non-visual criteria, confirmed by setting circadian stimulus (CS) targets and performing calculations using the calculator developed by the Lighting Research Center. Finally, human factors validation studies were conducted to gain insight from real end users in the healthcare profession; surveys were administered, data analyzed, and audio comments captured. The general consensus was positive, with requests to pilot the system in their hospitals. The importance of the research completed under this grant is that it allowed the exploration and development of a unique lighting system, one that would deliver a blend of visual and non-visual criteria in patient room design for today’s healthcare environment. The research investigated the area of multichannel LED technology, multichannel Power over Ethernet (PoE) drivers and their integration with automatic and manual controls as a system – uncovering and meeting challenges along the way. It married visual needs of patients and staff with support for 24 hour rhythms, placing value on the wellbeing of the patient – while successfully saving energy over incumbent technologies. Indications are that the market is ready and willing to invest – multiple healthcare facilities are in line to pilot this system, recognizing its value beyond energy to patient and staff well-being. Its value to the public can best be expressed by a patient support coordinator who, after spending several hours in the room being immersed in the lighting, analyzing all its features, commented: “This re-writes lighting for healthcare”.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1991

Nuclear electric propulsion development and qualification facilities

This paper summarizes the findings of a Tri-Agency panel consisting of members from the National Aeronautics and Space Administration (NASA), U.S. Department of Energy (DOE), and U.S. Department of Defense (DOD) that were charged with reviewing the status and availability of facilities to test components and subsystems for megawatt-class nuclear electric propulsion (NEP) systems. The facilities required to support development of NEP are available in NASA centers, DOE laboratories, and industry. However, several key facilities require significant and near-term modification in order to perform the testing required to meet a 2014 launch date. For the higher powered Mars cargo and piloted missions, the priority established for facility preparation is: (1) a thruster developmental testing facility, (2) a thruster lifetime testing facility, (3) a dynamic energy conversion development and demonstration facility, and (4) an advanced reactor testing facility (if required to demonstrate an advanced multiwatt power system). Facilities to support development of the power conditioning and heat rejection subsystems are available in industry, federal laboratories, and universities. In addition to the development facilities, a new preflight qualifications and acceptance testing facility will be required to support the deployment of NEP systems for precursor, cargo, or piloted Mars missions. Because the deployment strategy for NEP involves early demonstration missions, the demonstration of the SP-100 power system is needed by the early 2000's.

Dutt, D. S.↗
DOE OSTI2016

A Conceptual World Information Library (WIL) and Land Use Information System (LUIS) - 16181

The Organization for Economic Co-operation and Development Nuclear Energy Agency initiative on the Preservation of Records, Knowledge and Memory is addressing the topic of communicating with future generations on the location, specific contents, and potential risks associated with deep geologic nuclear waste repositories. At the Waste Isolation Pilot Plant (WIPP) in the United States, the U.S. Department of Energy (DOE) has committed, prior to the facility closure, to develop a Passive Institutional Controls (PICs) program designed to last as long as practicable. A portion of this PICs program includes development of records packages, selection of data storage materials and methods, and a determination of records retention/storage locations. The approved plan for record retention at WIPP includes the storage of information including hard copies of data, figures and maps in multiple libraries and archive record centers. With this in mind, it is easy to envision reams of various paper documents in a robust physical archive record center similar to one of the museums in Washington D.C., or DOE's Legacy Management facility in Morgantown, West Virginia. While some portion of records for nuclear waste burial sites should be maintained in this fashion for near-term retrieval purposes, it is widely accepted that this is not an efficient way to communicate with future generations even 1,000 years from now. Transmitting large detailed volumes of information to the future should be captured in an electronic format; maintained on computers, translated by computers, and perhaps updated by artificial intelligence as machine and human languages change over the centuries. In addition to a physical records development and storage process for transmittal to future generations, a web-based electronic database system should be developed. A World Electronic Library (WEL) database could be funded from various nations and perhaps sanctioned by the United Nations and/or the IAEA. This WEL could contain information regarding several different subjects with the intent of being a one-stop-information-shop for future generations. This database would require updates and maintenance for as long as there is a recipient. One subset of the WEL would be a spatial database containing all the information available to any set of GPS coordinates, anywhere within the world. This Land Use Information System (LUIS) database would contain information on past and present land use, natural resources, known geology, hydrology and atmospheric conditions, potential warnings, and other pertinent information. The LUIS database is where specific electronic information, a subset of all the records data gathered for a nuclear waste repository, could reside. For not only would LUIS provide the information on a nuclear waste repository when specific GPS coordinates were entered; but a search from the LUIS on 'Nuclear Waste Repositories' could bring up information, including data on location of repositories, radionuclides, operations, D and D, maps, and regulations, plus many other details for locations throughout the world. This tool could be used by future generations for a number of land use or resource exploration decisions. So what can we do now? We can agree to the types of information that should be captured into an electronic database for nuclear waste repositories. We can agree to the levels of detail, the file names and the formats, for ease of combining information sets in the future. Perhaps we can agree to a central electronic data storage site, or sites, where this information will reside for import into a centralized electronic record system, if one is ever developed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2020

Flight Simulation Scenarios for Commercial Pilot Training and Crew State Monitoring

NASA Langley researchers addressed the Commercial Aviation Safety Team Safety Enhancement 211 through a series of studies to address "Attention-related Human Performance Limiting States" which include channelized attention, diverted attention, startle/surprise, and confirmation bias. The present report focuses on the development of improved training scenarios for operationally realistic Line-Oriented Flight Training scenarios. Areas addressed in the report include: (1) Highlights of events in the LOFT scenario used; (2) Interesting findings with implications for simulator motion; (3) Eye-tracking heat maps in proximity to failure events; (4) Researcher observations of crews as test subjects versus a pilot and a research team co-pilot; and (5) The results of a follow-up questionnaire completed by pilot participants regarding their usual training as well as the scenarios employed in the SHARP studies. These pilot ratings and comments are of value to simulation training developers.

James R. Comstock, Jr.↗
NASA NTRS2011

Overview of NASA's Carbon Monitoring System Flux-Pilot Project

NASA's space-based observations of physical, chemical and biological parameters in the Earth System along with state-of-the-art modeling capabilities provide unique capabilities for analyses of the carbon cycle. The Carbon Monitoring System is developing an exploratory framework for detecting carbon in the environment and its changes, with a view towards contributing to national and international monitoring activities. The Flux-Pilot Project aims to provide a unified view of land-atmosphere and ocean-atmosphere carbon exchange, using observation-constrained models. Central to the project is the application of NASA's satellite observations (especially MODIS), the ACOS retrievals of the JAXA-GOSAT observations, and the "MERRA" meteorological reanalysis produced with GEOS-S. With a primary objective of estimating uncertainty in computed fluxes, two land- and two ocean-systems are run for 2009-2010 and compared with existing flux estimates. An transport model is used to evaluate simulated CO2 concentrations with in-situ and space-based observations, in order to assess the realism of the fluxes and how uncertainties in fluxes propagate into atmospheric concentrations that can be more readily evaluated. Finally, the atmospheric partial CO2 columns observed from space are inverted to give new estimates of surface fluxes, which are evaluated using the bottom-up estimates and independent datasets. The focus of this presentation will be on the science goals and current achievements of the pilot project, with emphasis on how policy-relevant questions help focus the scientific direction. Examples include the issue of what spatio-temporal resolution of fluxes can be detected from polar-orbiting satellites and whether it is possible to use space-based observations to separate contributions to atmospheric concentrations of (say) fossil-fuel and biological activity

Pawson, Steven↗
NASA NTRS1995

V/STOL systems research aircraft: A tool for cockpit integration

The next generation ASTOVL aircraft will have a complicated propulsion system. The configuration choices include Direct Lift, Lift-Fan and Lift + Lift/Cruise but the aircraft must also have supersonic performance and low-observable characteristics. The propulsion system may have features such as flow blockers, vectoring nozzles and flow transfer schemes. The flight control system will necessarily fully integrate the aerodynamic surfaces and the propulsive elements. With a fully integrated, fly-by-wire flight/propulsion control system, the options for cockpit integration are interesting and varied. It is possible to de-couple longitudinal and vertical responses allowing the pilot to close the loop on flightpath and flightpath acceleration directly. In the hover, the pilot can control the translational rate directly without having to stabilize the inner rate and attitude loops. The benefit of this approach, reduced workload and increased precision, has previously been demonstrated through several motion-based simulations. In order to prove the results in flight, the V/STOL System Research Aircraft (VSRA) was developed at the NASA Ames Research Center. The VSRA is the YAV-8B Prototype modified with a research flight control system using a series-parallel servo configuration in all the longitudinal degrees of freedom (including thrust and thrust vector angle) to provide an integrated flight and propulsion control system in a limited envelope. Development of the system has been completed and flight evaluations of the response types have been performed. In this paper we will discuss the development of the VSRA, the evolution of the flightpath command and translational rate command response types and the Guest Pilot evaluations of the system. Pilot evaluation results are used to draw conclusions regarding the suitability of the system to satisfy V/STOL requirements.

Stortz, Michael W.↗
DOE OSTI2017

China Green Low-Carbon City Index

The main purpose of the new China Green Low-Carbon City Index (CGLCI, or City Index) is to evaluate the status of green and low-carbon development for a large number of Chinese cities. Chinese cities are formulating plans and implementing programs to address national initiatives, especially the national low-carbon pilot program for 36 cities and six provinces. However, there is not yet an established framework for measuring, reporting, or evaluating low-carbon progress across Chinese cities, despite the development of a number of Chinese and international city indicator systems. The new China City Index highlights energy use and carbon emissions of Chinese cities, along with environmental and socio-economic indicators. We selected metrics (indicators) that have data available in China’s statistical system, are commonly used internationally, and reflect Chinese policy goals. We then benchmarked and ranked Chinese cities in terms of their status and progress, identified potential areas for improvement, and identified top-runners.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1989

Development of a Tactical Guidance Research and Evaluation System (TGRES)

The development of a simulation tool for tactical guidance research and the evaluation of systems performance in a tactically significant environment is described. The objective of the tool is to provide a means by which researchers can explore and exploit enhancements to airplane agility. The completed tool will include high-fidelity batch and piloted simulation capabilities, an advanced tactical guidance logic and a user-friendly interface. While the tool is being developed for the purpose of studying airplane agility, its modularity should make it easily adaptable to the analysis of other technologies and thus be of interest to a number of potential users.

Goodrich, Kenneth H.↗
DOE OSTI2017

Real-Time Detection of In-flight Aircraft Damage

When there is damage to an aircraft, it is critical to be able to quickly detect and diagnose the problem so that the pilot can attempt to maintain control of the aircraft and land it safely. We develop methodology for real-time classification of flight trajectories to be able to distinguish between an undamaged aircraft and five different damage scenarios. Principal components analysis allows a lower-dimensional representation of multi-dimensional trajectory information in time. Random Forests provide a computationally efficient approach with sufficient accuracy to be able to detect and classify the different scenarios in real-time. We demonstrate our approach by classifying realizations of a 45 degree bank angle generated from the Generic Transport Model flight simulator in collaboration with NASA.

42 ENGINEERING↗
DOE OSTI2013

Flue gas cleanup using the Moving-Bed Copper Oxide Process

The use of copper oxide on a support had been envisioned as a gas cleanup technique to remove sulfur dioxide (SO{sub 2}) and nitric oxides (NO{sub x}) from flue gas produced by the combustion of coal for electric power generation. In general, dry, regenerable flue gas cleanup techniques that use a sorbent can have various advantages, such as simultaneous removal of pollutants, production of a salable by-product, and low costs when compared to commercially available wet scrubbing technology. Due to the temperature of reaction, the placement of the process into an advanced power system could actually increase the thermal efficiency of the plant. The Moving-Bed Copper Oxide Process is capable of simultaneously removing sulfur oxides and nitric oxides within the reactor system. In this regenerable sorbent technique, the use of the copper oxide sorbent was originally in a fluidized bed, but the more recent effort developed the use of the sorbent in a moving-bed reactor design. A pilot facility or life-cycle test system was constructed so that an integrated testing of the sorbent over absorption/regeneration cycles could be conducted. A parametric study of the total process was then performed where all process steps, including absorption and regeneration, were continuously operated and experimentally evaluated. The parametric effects, including absorption temperature, sorbent and gas residence times, inlet SO{sub 2} and NO{sub x} concentration, and flyash loadings, on removal efficiencies and overall operational performance were determined. Although some of the research results have not been previously published because of previous collaborative restrictions, a summary of these past findings is presented in this communication. Additionally, the potential use of the process for criteria pollutant removal in oxy-firing of fossil fuel for carbon sequestration purposes is discussed.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2018

Conceptual Design of a Pilot-Scale Pyroprocessing Facility

Argonne National Laboratory and Merrick & Company introduced the conceptual design of a pilot-scale (100 T/year) pyroprocessing facility for the treatment of used fuel generated by commercial light water reactors and subsequent treatment of waste streams generated during the process. The primary purpose of this study was to perform sufficient engineering for the pilot facility conceptual design so that credible capital and operating cost estimates could be developed. Initial safety, safeguards, and security assessments were also completed to provide a detailed evaluation in these areas that can significantly affect both capital and operating costs. Electrorefining-based pyroprocessing resulted in a compact hot-cell facility with few process equipment systems. The process equipment and support systems were estimated to cost $93 million and the facility $305 million for a project total cost of $398 million. The annual operating cost was estimated at $53 million/year Scaling up to a commercial-scale (400 T/year) was also assessed and the capital cost was estimated at $911 million with annual operating cost of $90 million/year.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2012

TRU Waste Transportation Plan (Rev. 2)

This plan defines the requirements for managing the transportation of transuranic (TRU) and TRU mixed waste from a generator/storage site to the Waste Isolation Pilot Plant (WIPP) or to another generator/storage site (inter-site). This plan was developed in accordance with Department of Energy (DOE) Order 460.2A, Departmental Materials Transportation and Packaging Management.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

New Aqueous Binders for Lithium-ion Batteries

This final report summarizes the research effort of the CRADA between PPG Industries and Argonne National Laboratory (CRADA # C1400501 and Amendment 1 - ACK 85C11, Rev. 1), and completes the requirements of Task #5 in the CRADA. The results from Argonne represent a combined effort between the MERF and CAMP Facility (Materials Engineering Research Facility and the Cell Analysis, Modeling and Prototyping Facility). The key points of this report can be briefly summarized as: The multicomponent aqueous binder for NCM cathodes developed by PPG shows promising results when used on the CAMP Facility’s pilot-scale coater; NCM523 cathode electrodes exposed to water exhibit a voltage anomaly in the first two formation cycles that appears to have little effect on the material capacity, but needs to be explored further; the experimental LFP electrode produced by PPG does cycle electrochemically, but with reduced capacity and an uncharacteristic voltage profile; there is no obvious correlation between the pH and zeta-potential of materials that are commonly used in the lithium-ion battery; lithium ions are more readily dissolved out of NCM523 by water than the transition metals (by two orders of magnitude), and suggests that the plating bath may need to be spiked with a lithium salt; the approach of creating sub-micron size NCM523 particles via ball milling results in a cathode material with poor electrochemical performance.

25 ENERGY STORAGE↗
DOE OSTI2020

Innovative Pathways: Transforming Impact Investments to Working Capital For Early Stage Cleantech Companies: Los Angeles Cleantech Incubator (January 1, 2020 to March 31, 2020)

Project Objectives: The focus for the entirety of the last quarter was on the completion of the pilot loan funding within our portfolio, and the closing out of our DOE-CAP Grant: “Innovative Pathways: Transforming Impact Investments to Working Capital for Early Stage Cleantech Companies.” The fourteenth quarter (Q14) of the program performance was also dedicated toward two main activities: the continued fundraising efforts for a formalized LACI debt fund, as well as finalization of the lending processes for pilot underwriting amongst the LACI Team and with Mission Driven Finance. This quarter marked key successes around the workflows of the DOE-CAP grant, specifically around fund capitalization efforts. Activities during the thirteenth quarter included: 1. Finalization of the DOE-CAP grant activities and work-flows; 2. Due diligence, underwriting and issuance of one (1) loan in Q1 2021 and three (3) in Q4 2020 for technology providers in grant-funded zero emissions mobility & community pilots, in partnership with LACI and local organizations, totaling ten (10) total loans; 3. Development of fundraising and marketing materials, and distribution to 30+ possible funding sources over the course of Q13 & Q14; and 4. Reinvigoration of conversations with Mission Driven Finance, the prospective underwriting partner for key activities and governance documents, and finalization of all loan processing activities once the fund is capitalized

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Overview of Virtual Test Bed FY23 Activities

The National Reactor Innovation Center (NRIC) was created for accelerating the deployment of novel reactor concepts. This will be achieved by providing both physical and virtual spaces for building and testing various components, systems, and complete pilot plants. The Virtual Test Bed (VTB) represents the virtual arm. It is being developed in collaboration with Department of Energy’s (DOE) Nuclear Energy Advanced Modeling and Simulation (NEAMS) program.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Modeling Approach for the Aluminum-clad Dry Storage Pilot using HFIR Fuel

To confirm that the dry storage of aluminum-clad research reactor spent nuclear fuel (ASNF) will remain within the safety envelope after applied drying schemes and that the resulting evolution of the gas space composition, temperature, and pressure conditions are understood, a dry storage pilot project is being established. The pilot will incorporate an instrumented lid for discrete interval or for on-demand gas composition and temperature monitoring of two DOE Standard Canisters (DSCs) loaded with three High Flux Isotope Reactor (HFIR) inner cores per DSC. Each DSC would be subjected to a separate alternative candidate drying scheme. Canisters will undergo 1 to 5 years of monitoring, including internal temperature and gas sampling to track pressure and composition changes. This report outlines the approach for modeling the ASNF-in-canister behavior in terms of evolving gas space conditions for the ASNF dry storage pilot using HFIR fuel. The ASNF has an adherent surface oxyhydroxide layer comprised of boehmite/bayerite that generates hydrogen when subjected to irradiation. Three-dimensional multi-physics computational fluid dynamics simulations will be executed to compute the thermal field within the DSC and provide inputs to a chemical model employed to compute pressure buildup as hydrogen is generated in the system. Implemented in Cantera, the chemical model solves gas phase and aluminum oxyhydroxide surface-mediated radiolysis reactions. Gas phase reactions are sourced from Wittman and Hanson (2015), whereas surface-mediated reactions are incorporated by fitting experimental data using an optimization algorithm (Abboud, 2023). Water radiolysis reactions from Wren and Ball (2001) are adopted with modifications as described in Abboud (2023c). Understanding the effect of the hydrogen buildup over time is important for long-term storage safety considerations. Modeling results will include the canister pressure, temperature, and composition evolution from the initial helium backfill with the addition of radiolytically-evolved chemical species (e.g., hydrogen and oxygen). The specific HFIR cores for the pilot program have not yet been selected, and the overall design is still in development. The CFD-chemical model used for this work will be based on prior models with necessary updates to allow for improved accuracy and efficiency. The experimental data obtained from the HFIR demonstration will be used to improve and validate the computational models to predict the ASNF-in-canister behavior.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗