Search NASA⌕ Search

SEARCH · Search NASA

Results for “rough surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Aeolian Sediment Transport through Large Patches of Roughness in the Atmospheric Inertial Sublayer

Roughness influences the flux of wind driven sand transport. In this paper, we report on sediment transport measurements for four different surface roughness configurations composed of the same size (solid) roughness elements in the atmospheric inertial sublayer (ISL). Results of these tests indicate that sediment transport rates through patches of roughness in the atmospheric inertial sublayer are to a large extent controlled and scale proportionally with the roughness density (lambda = n b h/S, where n is number of elements of breadth b and height h in area S) of the surface. However, element size apparently increases the magnitude of the reduction beyond that attributable to lambda. A sediment transport model that incorporates the effect of shear stress partitioning appears to predict reasonably well the effect of roughness on sand transport in the cases where the roughness elements are less than or equal to 0.10 m in height. However, when the dimensions of the roughness itself are equivalent to or are greater than the range of saltation lengths (vertical and horizontal), additional interactions of the elements with the saltation cloud appear to reduce the transport efficiency.

Gillies, John A.↗

Interfacial phonon scattering and transmission loss in > 1 µm thick silicon-on-insulator thin films

Scattering of phonons at boundaries of a crystal (grains, surfaces, or solid/solid interfaces) is characterized by the phonon wavelength, the angle of incidence, and the interface roughness, as historically evaluated using a specularity parameter p formulated by Ziman [Electrons and Phonons (Clarendon Press, Oxford, 1960)]. This parameter was initially defined to determine the probability of a phonon specularly reflecting or diffusely scattering from the rough surface of a material. The validity of Ziman's theory as extended to solid/solid interfaces has not been previously validated. Here, to better understand the interfacial scattering of phonons and to test the validity of Ziman's theory, we precisely measured the in-plane thermal conductivity of a series of Si films in silicon-on-insulator (SOI) wafers by time-domain thermoreflectance (TDTR) for a Si film thickness range of 1–10 μm and a temperature range of 100–300 K. The Si/SiO 2 interface roughness was determined to be 0.11±0.04nm using transmission electron microscopy (TEM). Furthermore, we compared our in-plane thermal conductivity measurements to theoretical calculations that combine first-principles phonon transport with Ziman's theory. Calculations using Ziman's specularity parameter significantly overestimate values from the TDTR measurements. We attribute this discrepancy to phonon transmission through the solid/solid interface into the substrate, which is not accounted for by Ziman's theory for surfaces. The phonons that are specularly transmitted into an amorphous layer will be sufficiently randomized by the time they come back to the crystalline Si layer, the effect of which is practically equivalent to a diffuse reflection at the interface. Finally, we derive a simple expression for the specularity parameter at solid/amorphous interfaces and achieve good agreement between calculations and measurement values.

36 MATERIALS SCIENCE↗

Microwave bistatic reflectivity dependence on the moisture content and matric potential of bare soil

Results are presented of an experimental program to determine the functional dependence of the microwave reflectivity of nonvegetated soil surfaces upon volumetric soil moisture and matric potential. A combination evaporation-drainage field experiment was conducted on a bare Captina slit loam with reflectivity, soil moisture content, and matric potential monitored for extended time periods. Results show that for a restricted pressure range (approximately -0.05 to -0.75 bar) there is excellent linear correlation between the log of bistatic reflectivity and both volumetric moisture content and matric potential. Layering effects due to steep moisture content (and matric potential) gradients in the profile are demonstrated to have two distinct and significant effects on the reflectivity response. At near saturation of rough surfaces a very thin dry surface layer appears to modify the effective roughness. This leads to a saturation of reflectivity at high moisture contents. As the surface proceeds to dry further, deeper layers produce coherent interference patterns in the reflectivity response, particularly at the higher frequencies.

Waite, W. P.↗

Degradation mechanisms of electron mobility in metal-oxide-semiconductor field-effect transistors with LaAlO{sub 3} gate dielectric

LaAlO{sub 3} is a promising candidate of gate dielectric for future very large scale integration devices. In this work, metal-oxide-semiconductor capacitors and transistors with LaAlO{sub 3} gate dielectric were fabricated and the electron mobility degradation mechanisms were studied. The LaAlO{sub 3} films were deposited by radio frequency magnetron sputtering. The LaAlO{sub 3} films were examined by x-ray diffraction, secondary ion mass spectroscopy, and x-ray photoelectron spectroscopy. The temperature dependence of metal-oxide-semiconductor field-effect transistors characteristics was studied from 11 K to 400 K. The rate of threshold voltage change with temperature (DELTAV{sub T}/DELTAT) is -1.51 mV/K. The electron mobility limited by surface roughness is proportional to E{sub eff}{sup -0.66} in the electric field of 0.93 MV/cm<E{sub eff}<2.64 MV/cm at 300 K and the phonon scattering is proportional to T{sup -5.6} between 300 and 400 K. Soft optical phonon scattering was used to explain the extra source of phonon scattering in LaAlO{sub 3}-gated n-channel metal-oxide-semiconductor field-effect transistors.

36 MATERIALS SCIENCE↗

In situ strain relaxation comparison between GaAsBi and GaInAs grown by molecular-beam epitaxy

The strain relaxation of GaAsBi is studied in order to determine both the maximum thickness before dislocations form for various misfits and the potential of GaAsBi for usage in the compositionally graded buffer of lattice-mismatched devices. Low-misfit GaAsBi epilayers are grown and compared with GaInAs, a well-studied material currently used in compositional grades. Relaxation behavior and dislocation energetics are compared using in situ wafer curvature. Samples are grown using molecular-beam epitaxy under similar conditions with misfit up to -0.81%. GaAsBi begins to relax at a lower thickness than GaInAs of the same mismatch. This leads to the majority of GaAsBi strain relaxation occurring with less material growth than comparable GaInAs. However, GaAsBi has greater residual strain than GaInAs after 2 {mu}m of growth. These results indicate that GaAsBi requires less elastic energy to form dislocations and more elastic energy to either encourage glide or multiply dislocations than GaInAs. GaAsBi shows less surface roughness than GaInAs for all samples, ruling out roughness as a source of dislocations and hindered glide in these alloys.

36 MATERIALS SCIENCE↗

How a raindrop gets shattered on biological surfaces

Many biological surfaces of animals and plants (e.g., bird feathers, insect wings, plant leaves, etc.) are superhydrophobic with rough surfaces at different length scales. Previous studies have focused on a simple drop-bouncing behavior on biological surfaces with low-speed impacts. However, we observed that an impacting drop at high speeds exhibits more complicated dynamics with unexpected shock-like patterns: Hundreds of shock-like waves are formed on the spreading drop, and the drop is then abruptly fragmented along with multiple nucleating holes. Such drop dynamics result in the rapid retraction of the spreading drop and thereby a more than twofold decrease in contact time. Our results may shed light on potential biological advantages of hypothermia risk reduction for endothermic animals and spore spreading enhancement for fungi via wave-induced drop fragmentation.

59 BASIC BIOLOGICAL SCIENCES↗

Preparation and Characterization Methods of Thin Layer Samples for Standoff Detection

Detection of analytes deposited on surfaces is crucial for many applications: Development of methods to prepare thin layers (e.g. ~5 to 100 µm) is important for both system design and field studies. In this work, solid and liquid analytes were deposited on painted and bare substrates including aluminum, glass, plastic, and concrete using an ExactaCoat ultrasonic spray coater. Laboratory hemispherical reflectance (HRF) spectra were collected for samples with different layer thicknesses so as to characterize both the composition and layer thickness. Preliminary results demonstrate that to prepare homogenous layers on surfaces, parameters such as substrate type, analyte solubility, vapor pressure, paint color, surface porosity, and surface roughness are all important. Liquid chemicals posed several issues during deposition: Diisopropyl methyl phosphonate evaporated from surfaces more quickly than the other chemicals and was thus not detected in the HRF experiments. Less volatile liquids, such as tributylphosphate, remained on the surface for the duration of the test, but a uniform layer thickness could not be obtained as the liquid pooled to one side when mounted at an angle. The deposition of solids (e.g., acetaminophen, caffeine and methylphosphonic acid) from volatile solvents such as chloroform also proved problematic due to streaking caused by rapid solvent evaporation. Solids deposited from ethanol, however, worked well on bare substrates. For most samples plotting the integrated infrared band strength vs. surface thicknesses showed a linear relationship, confirming that the surface loading can be controlled by programming the concentration and the number of passes on the ultrasonic sprayer.

Thin layer, deposition, infrared standoff, Hemisph↗

Two-dimensional Gaussian processes applied to the determination of contact between lubricated rolling surfaces

The effectiveness of a lubricant film preventing metallic contact between two rolling surfaces (such as in ball bearings) as a function of surface roughness parameters was investigated. The parameters considered are the spectral moments of the two-dimensional surface obtained by superposition of the two rolling surfaces. The peak height distribution, estimation of one-dimensional profile spectral moments, and the estimation of two-dimensional surface moments from several profile measurements were considered. Also given is an asymptotic relation between the mean film thickness and contact occurrences.

Sidik, S. M.↗

Fracture surface analysis in composite and titanium bonding

To understand the mechanical properties of fiber-reinforced composite materials, it is necessary to understand the mechanical properties of the matrix materials and of the reinforcing fibers. Another factor that can affect the mechanical properties of a composite material is the interaction between the fiber and the matrix. In general, composites with strong fiber matrix bonding will give higher modulus, lower toughness composites. Composites with weak bonding will have a lower modulus and more ductility. The situation becomes a bit more complex when all possibilities are examined. To be considered are the following: the properties of the surface layer on the fiber, the interactive forces between polymer and matrix, the surface roughness and porosity of the fiber, and the morphology of the matrix polymer at the fiber surface. In practice, the surface of the fibers is treated to enhance the mechanical properties of a composite. These treatments include anodization, acid etching, high temperature oxidation, and plasma oxidation, to name a few. The goal is to be able to predict the surface properties of carbon fibers treated in various ways, and then to relate surface properties to fiber matrix bonding.

Devilbiss, T. A.↗

Observation of radiative surface plasmons in metal-oxide-metal tunnel junctions

A peak in the UV region of the spectrum of light emitted from metal-oxide-metal (MOM) tunnel junctions has been observed at room temperature. Both the amplitude and wavelength of the peak are sensitive to applied junction bias. The UV peak corresponds to the normal or radiative surface plasmon mode while a visible peak, also present in the present spectra and reported in past MOM literature, is due to the tangential or nonradiative mode. The radiative mode requires no surface roughness or gratings for photon coupling. The results show that it is possible to obtain radiative surface plasmon production followed by a direct decay into photons with MOM tunnel diodes. A MOM diode with a double anode structure is found to emit light associated only with the nonradiative mode. The thickness dependence of the UV peak, along with the experimental results of the double anode MOM diode and the ratio of the UV peak to visible peak, support the contention that the UV light emission is indeed due to the radiative surface plasmon.

Donohue, J. F.↗

Modifications to the three-component classification algorithm for SAR data

Previously, a scattering model was used to classify SAR data as due to three mechanisms: surface or odd-bounce scattering; double-bounce scattering; and volume scattering. A Bragg rough-surface model was used for odd-bounce scattering, and two reflecting surfaces, as in a dihedral corner reflector, represented the double-bounce scattering mechanism. A random collection of infinitely thin cylinders was used to model the volume scattering contribution. It was assumed that the cylinders are uniformly oriented in all directions. In this work, modifications are made to the above model, which include specifying a preferred orientation for the cylinders representing branches and using thin cylinders of finite thickness as opposed to infinitely thin ones. In the first case, the preferred orientation is represented by a probability density function in the form of a dirac delta function. For the second case, small argument asymptotic expansions of Bessel functions are used to express the volume scattering contributions in terms of quantities containing the average radius of the cylinders. Since in each case the number of unknowns exceeds that of equations, simplifying assumptions are made. The solutions are applied to multifrequency polarimetric SAR data to obtain the new unknowns in addition to the relative contributions of each scattering mechanism. Several results are presented. It is found that the calculated percentage of each mechanism does not change significantly compared to the original model; however, additional information is gained about the scatterers.

Moghaddam, M.↗

Topography of the Moon from the Clementine Lidar

Range measurements from the lidar instrument carried aboard the Clementine spacecraft have been used to produce an accurate global topographic model of the Moon. This paper discusses the function of the lidar; the acquisition, processing, and filtering of observations to produce a global topographic model; and the determination of parameters that define the fundamental shape of the Moon. Our topographic model: a 72nd degree and order spherical harmonic expansion of lunar radii, is designated Goddard Lunar Topography Model 2 (GLTM 2). This topographic field has an absolute vertical accuracy of approximately 100 m and a spatial resolution of 2.5 deg. The field shows that the Moon can be described as a sphere with maximum positive and negative deviations of approx. 8 km, both occurring on the farside, in the areas of the Korolev and South Pole-Aitken (S.P.-Aitken) basins. The amplitude spectrum of the topography shows more power at longer wavelengths as compared to previous models, owing to more complete sampling of the surface, particularly the farside. A comparison of elevations derived from the Clementine lidar to control point elevations from the Apollo laser altimeters indicates that measured relative topographic heights generally agree to within approx. 200 in over the maria. While the major axis of the lunar gravity field is aligned in the Earth-Moon direction, the major axis of topography is displaced from this line by approximately 10 deg to the cast and intersects the farside 24 deg north of the equator. The magnitude of impact basin topography is greater than the lunar flattening (approx. 2 km) and equatorial ellipticity (approx. 800 m), which imposes a significant challenge to interpreting the lunar figure. The floors of mare basins are shown to lie close to an equipotential surface, while the floors of unflooded large basins, except for S.P.-Aitken, lie above this equipotential. The radii of basin floors are thus consistent with a hydrostatic mechanism for the absence of significant farside maria except for S.P.-Aitken, whose depth and lack of mare require significant internal compositional and/or thermal heterogeneity. A macroscale surface roughness map shows that roughness at length scales of 10(exp 1) - 10(exp 2) km correlates with elevation and surface age.

Smith, David E.↗

Roughness of Ti Substrates for Control of the Preferred Orientation of TiO 2 Nanotube Arrays as a New Orientation Factor

We report the surface roughness of a Ti substrate as a critical factor for controlling the degree of the preferred orientation of anatase TiO2 nanotube arrays (NTAs) which are synthesized by anodization and a subsequent annealing process. The degree of the preferred orientation to the (004) plane of the anatase crystal structure has a strong dependency on the root-mean-square roughness (Sq) of the initial Ti substrate when the roughness-controlled substrates are anodized in an ethylene glycol-based electrolyte containing ~2 wt % of water. Highly preferred oriented NTAs were obtained from low-Sq (<10 nm) substrates, which were accompanied by uniform pore distribution and low concentration of hydroxyl ions in as-anodized amorphous NTAs. The mechanism of the preferred oriented crystallization of nanometer-scaled tube walls is explained considering the microscopic geometrical uniformity of the oxide barrier and nanopores at the early stage of anodization, which affected the local electric field and thus the insertion of the hydroxyl group into the amorphous TiO2 tube walls.

14 SOLAR ENERGY↗

Optimization of a chlorine-based deep vertical etch of GaN demonstrating low damage and low roughness

The dry etching of GaN to form deep vertical structures is a critical step in many power device processes. To accomplish this, a chlorine and argon etch is investigated in detail to satisfy several criteria simultaneously such as surface roughness, crystal damage, and etch angle. Etch depths from 2 to 3.4 μm are shown in this paper. The authors investigate the formation of etch pits and its contributing factors. In addition, a nickel hard mask process is presented, with an investigation into the causes of micromasking and a pre-etch to prevent it. The authors show the results of optimized etch conditions resulting in a 2 μm deep, 0.831 nm rms roughness etch, with a 7.6° angle from vertical and low surface damage as measured by photoluminescence.

Tahhan, Maher↗

Structure evolution of zinc oxide thin films deposited by unbalance DC magnetron sputtering

Zinc oxide (ZnO) thin films are deposited on corning glass substrates using unbalanced DC magnetron sputtering. The effect of growth temperature on surface morphology and crystallographic orientation of ZnO thin film is studied using atomic force microscopy (AFM) and X-ray diffraction (XRD) techniques. The surface morphology and crystallographic orientation of ZnO thin film are transformed against the increasing of growth temperature. The mean grain size of film and the surface roughness are inversely and directly proportional towards the growth temperature from room temperature to 300 °C, respectively. The smaller grain size and finer roughness of ZnO thin film are obtained at growth temperature of 400 °C. The result of AFM analysis is in good agreement with the result of XRD analysis. ZnO thin films deposited in a series of growth temperatures have hexagonal wurtzite polycrystalline structures and they exhibit transformations in the crystallographic orientation. The results in this study reveal that the growth temperature strongly influences the surface morphology and crystallographic orientation of ZnO thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Severe Hot Corrosion of the Superalloy IN718 in Mixed Salts of Na{sub 2}SO{sub 4} and V{sub 2}O{sub 5} at 700 °C

This study presents hot corrosion behavior of the superalloy IN718 in 100 wt.% NaCl (salt S) and in salt mixtures of 60 wt.% Na{sub 2}SO{sub 4} + 40 wt.% V{sub 2}O{sub 5} (SM1) and 75 wt.% Na{sub 2}SO{sub 4} + 15 wt.% NaCl + 10 wt.% V{sub 2}O{sub 5} (SM2), deposited separately by spray gun technique, at elevated temperature of 700 °C. The weight gain per unit area at 700 °C was increased by 49% for salt S, 153% for the dual salt mixture SM1, and only 8% for the triple salt mixture SM2, in comparison with that observed earlier at 600 °C. The marked increase in the severity of corrosion at 700 °C is attributed to formation of the highly damaging compound NaVO{sub 3} that significantly enhances the oxygen activity, in the SM1 coated samples. The effect of surface roughness and dislocation density on corrosion behavior at 700 °C, however, is found to be similar to that at 600 °C. Ultrasonic shot peening, a novel technique of surface modification, is found to enhance the hot corrosion resistance in the salt mixture SM1 at 700 °C appreciably due to extensive grain refinement to nanoscale and formation of highly protective Cr{sub 2}O{sub 3} layer in the surface region.

36 MATERIALS SCIENCE↗

Fractional-dimensional Child-Langmuir law for a rough cathode

This work presents a self-consistent model of space charge limited current transport in a gap combined of free-space and fractional-dimensional space (F{sup α}), where α is the fractional dimension in the range 0 < α ≤ 1. In this approach, a closed-form fractional-dimensional generalization of Child-Langmuir (CL) law is derived in classical regime which is then used to model the effect of cathode surface roughness in a vacuum diode by replacing the rough cathode with a smooth cathode placed in a layer of effective fractional-dimensional space. Smooth transition of CL law from the fractional-dimensional to integer-dimensional space is also demonstrated. The model has been validated by comparing results with an experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suppressed Superconductivity on the Surface of Superconducting RF Quality Niobium for Particle Accelerating Cavities

Significant performance degradation of superconducting RF (radio frequency) niobium cavities in high RF field is strongly associated with the breakdown of superconductivity on localized multi-scale surface defects lying within the 40 nm penetration depth. These defects may be on the nanometer scale, like grain boundaries and dislocations or even at the much larger scale of surface roughness and welding pits. By combining multiple superconducting characterization techniques including magneto-optical (MO) imaging and direct transport measurement with non-contact characterization of the surface topology using scanning confocal microscopy, we were able to show clear evidence of suppression of surface superconductivity at chemically treated RF-quality niobium. We found that pinning of vortices along GBs is weaker than pinning of vortices in the grains, which may indicate suppressed superfluid density on GBs. We also directly measured the local magnetic characteristics of BCP-treated Nb sample surface using a micro-Hall sensor in order to further understanding of the effect of surface topological features on the breakdown of superconducting state in RF mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗