Search NASA⌕ Search

SEARCH · Search NASA

Results for “solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,667 records · Page 93

A New Radionuclide Sorption Database for Cementitious Materials Accounting for Geochemical Evolution - 18477

Cementitious materials are being widely used as solidification/stabilisation and barrier materials for a variety of radioactive wastes, due to their favourable retention properties for metals and radionuclides. The retention properties result from mineral phases in hydrated cement that (i) possess a high density and diversity of reactive sites for the fixation of radionuclides through a variety of sorption reactions, ranging from surface adsorption to incorporation and solid-solution formation, and (ii) buffer pH in the range 10- 13, depending on composition, which tends to limit the solubility of many metal ions. A quantitative database on the solid/liquid distribution behaviour ('sorption database') of 25 elements (Ag, Am, Be, C, Ca, Cl, Cs, H, I, Mo, Nb, Ni, Np, Pa, Pb, Pd, Pu, Ra, Se, Sn, Sr, Tc, Th, U, Zr) in hydrated cement systems is established on the basis of a consistent review and re-evaluation of literature data. Effects of geochemical evolution or ageing cements on sorption/incorporation processes are explicitly evaluated and quantified. In addition to recommended values, all underlying original experimental data and key experimental information are provided, which allows users to trace the given recommendations or to develop their own set of key values. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Improved Heat Exchanger Performance Achieved Through Improved Condensate Drainage - 18478

Hanford's 242-A Evaporator has had the mission of reducing waste volume in the Hanford Tank Farms since the late 1970's. At the very heart of the 242-A evaporation process is the E-A-1 reboiler, a heat exchanger which adds heat to the waste, and the vacuum condenser system, a three-stage condenser/ejector system which condenses the waste vapors and provides the vacuum at which the evaporation process operates. Over a long period of time, significant degraded performance has been observed in the heat exchangers in both the heating system and in the vacuum condensing system. This degraded performance was indicative of degraded conditions in equipment and/or piping associated with both the heating and vacuum condenser systems. However, in searching for degraded condition in these systems, 242-A engineering also discovered that both systems contained design errors in the condensate drainage associated with all heat exchangers in both systems. By addressing the condensate design errors in addition to correcting the degraded conditions, system performance was restored and even possibly improved. All heat exchangers in the heating and vacuum condensing systems are shell and tube type heat exchangers. Both have liquid on the tube side and vapor on the shell side (in the case of the reboiler the liquid is tank waste and the vapor is 10 lb heating steam, and in the case of the vacuum condensers the liquid is cooling water and the vapor is waste vapor). In both systems, engineering proposed that the vapor condensate was backing up into the heat exchanger, resulting in added poor performance. By focusing on basic heat exchanger system design, projects were initiated to redesign the condensate drainage of these systems and re-plumb the condensate drain lines. Data collected before and after the replumbing provides evidence that the corrected drain lines from the heat exchangers improved the performance of the system as a whole, and in the case of the reboiler, removed a potentially damaging steam condensate water hammer condition. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Design and Licensing of Irradiated Uranyl Nitrate Liquid Containers and Applicable Loading and Packaging System - 18481

Irradiated highly enriched uranyl nitrate liquid (HEUNL) solutions are typically residual materials resulting from the processing of uranium target materials in the production of radioisotopes. Traditionally, these residual materials have been processed and stored at the site of origin, due to the lack of an option for packaging, transportation and disposition. Modern alternatives to process, stabilize, package and dispose of these materials have been developed, but until recently there has not been a viable Type B package solution that could be used to ship these materials in sufficient quantities to justify the cost of an off-site disposition strategy. For this reason, most facilities that generate irradiated HEUNL materials have implemented on-site storage tanks or containers, resulting in the significant accumulation of HEUNL inventories worldwide. This paper provides an overview of the design and licensing activities for the development of sealed irradiated HEUNL transport containers to permit safe transportation of this material in the NAC Legal Weight Truck (NAC-LWT) cask. A description of the robust HEUNL container, licensing and fabrication is also presented. In addition, NAC has developed a specialized loading system to optimize the process to load, package and un-package HEUNL materials to minimize worker exposure during loading, and execute the packaging process efficiently for safe transport and retrieval. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Immobilized Low-Activity Waste Transportation System - 18496

The transportation of radioactive immobilized low-activity waste (ILAW) containers at the United States Department of Energy's (DOE) Hanford site is planned with a new ILAW transporter system. A project will design, procure, and fabricate components to support the safe and efficient transport of the radioactive ILAW containers, generated at the Hanford Tank Waste Treatment and Immobilization Plant (WTP), Low-Activity Waste (LAW) production facility, to the Integrated Disposal Facility (IDF) final disposal site. Prototype design was completed in fiscal year (FY) 2017. Fabrication of the transportation trailer/pallet system is occurring in FY2018, with testing to be completed in early FY2019. Any design modification will be incorporated into the design, and procurement of additional systems will then occur, to support WTP LAW hot commissioning, as soon as 2022. This project is implemented by the DOE tank farm contractor, Washington River Protection Solutions LLC (WRPS), with primary prototype design and fabrication being performed by SNC-Lavalin (Atkins). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Challenging Engineering Demographics and the READY Program - 18528

The mission of the Liquid Waste Organization at the Savannah River Site involves the safe storage of nuclear waste, closure of waste tanks, and immobilization of the waste into grout (low-level waste) or glass (high-level waste). With much of the mission left to complete and a significant percentage of the engineering organization eligible for retirement within the next 5 years, focus has been on recruiting and retaining new hires and early career engineers. Over the past two years, enhancements have been made to current programs and new programs have been created with the goal of improving the retention rate for engineering. These programs include the Reaching Engineers at the Development Years, the Early Career Professional Technology Exchange, the Shift Technical Engineer Pipeline, and Technical Staff Training. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Immobilization of Radioactive Materials Using Porous Iron Composite Media - 18582

High levels of nitrate (NO{sub 3}) derived from agriculture and naturally occurring radioactive materials (NORM), primarily uranium (U) and natural decay chain products that have been mobilized by the influx of oxygenated, high-alkalinity water, are a threat to shallow groundwater resources in California. Porous Iron Composite (PIC) materials were evaluated as a water treatment option in a series of batch experiments. While the use of Zero Valent Iron (ZVI) to address groundwater contaminated with NO{sub 3} or U has been demonstrated, the ability of PICs to chemically reduce and immobilize U and other associated contaminants in oxygenated alkaline groundwater where soluble uranyl-carbonate species dominate and high NO{sub 3} levels may compete for reductive capacity remain a concern. Additionally, ZVI materials have been used to immobilize other redox sensitive radionuclides (e.g., technetium-99 ({sup 99}Tc)) with limited success. Batch tests were conducted using an artificial groundwater surrogate (i.e., CAGW for California Groundwater) containing ∼ 100 mg L{sup -1} NO{sub 3}{sup -}, 200 mg L{sup -1} alkalinity, 100 μg L{sup -1} U, 100 μg L{sup -1} rhenium (Re) as a non-radioactive surrogate for the nuclear fission product technetium-99 ({sup 99}Tc), 100 μg L{sup -1} stable strontium (Sr) as a surrogate for radium (Ra) and the fission product strontium-90 ({sup 90}Sr), and 50 μg L{sup -1} arsenic (As), a common groundwater contaminant. Five gram samples of the PIC material were reacted with 200 mL of CAGW under two different atmospheric conditions to evaluate the impact of O{sub 2}. Batch tests were also conducted in the presence and absence of another oxidized species, NO{sub 3}. At specific time intervals, a small aliquot was collected from each batch treatment for chemical analysis (i.e., U, Re, As, Fe, NO{sub 3}, etc.) and the pH and ORP of the remaining suspension was measured. The PIC was effective at fully reducing NO{sub 3}{sup -} levels over the extended reaction time, even though the reactor pH quickly increased above 8.0 during equilibration. Soluble levels of U and Re decreased in a similar fashion to NO{sub 3}{sup -} in the presence and absence of O{sub 2}. Soluble As levels decreased more rapidly than other contaminants, but remained at ∼ 1 μg L{sup -1}. Very little nitrite (NO{sub 2}{sup -}) was detected in the batch tests, with NH{sub 4}{sup +} levels consistent with the amount of NO{sub 3}{sup -} reduced. Similar rates of immobilization for U, Re, and As were observed in the presence and absence of NO{sub 3}{sup -}. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Observations and Lessons Learned from Testing of the Hanford Waste Treatment Plant Standard High Solids Vessel Design - 18635

The Hanford Waste Treatment and Immobilization Plant (WTP) recently completed qualification testing of the mixing system for the standard high solids vessel design the U.S. Department of Energy (DOE) proposed to replace several vessels in the design of the plant Pretreatment Facility. Testing was split into two phases. The first phase exercised the pulse jet mixer control system to ensure that the control software could accommodate fluids across the complete range of expected densities and viscosities within the vessel for all operational modes. The second phase of testing was focused on the mixing performance of the vessel, specifically, whether mixing was adequate to support the transfer, de-inventory, throughput, and sampling functions of the vessel. Key observations and lessons learned from testing include: - Successful transfer of waste within and beyond the design basis slurry solids concentration; - Successful resuspension and transfer of large, heavy particles; - Effective performance of multi-level bubblers for process control and monitoring; - Effective controls performance; - Reduction of sparger flowrate from nominal design flow; - Liquid blending within about 15 minutes; - Insights into sample representativeness and uniformity of transfers to inform process control strategies. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Stabilization/Solidification of Tritiated Water - 20135

Tritiated water was stabilized/solidified by using calcium oxide and a polymer. First, tritiated water was changed into the powder form of calcium hydroxide by addition of tritiated water into calcium oxide. Then the produced calcium hydroxide was solidified in waste form by using a polymer binder. The specimens of waste form prepared by surrogate calcium hydroxide were subjected to compressive strength testing and water immersion testing. In addition, the specimens of waste form prepared by tritiated calcium hydroxide were subjected to leach testing. The mean compressive strength of the specimens containing 40 wt % of the surrogate calcium hydroxide was about 98.5 MPa (14,300 psi). After water immersion testing, there was no distinct change in the appearance of the specimens. The mean compressive strength of the specimens after water immersion was 79.1 MPa (11,470 psi). The mean diffusion coefficient of tritium for the specimens containing 40 wt% of tritiated calcium hydroxide was 5.4 x 10-10 cm{sup 2}/s. These findings indicate that the waste form has enough mechanical integrity and durability for final disposal and releases tritium very slowly. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

3D Structure of Oil Droplets in Hardened Geopolymer Emulsions: Impact of Various Commercial Liquid Oils - 20184

Cement-based solidification/stabilization (S/S) is a widely applied technique for the immobilization of inorganic hazardous constituents. However, S/S is considered less compatible for organic liquid waste (OLW) because organic compounds may inhibit binder hydration. Geopolymers (i.e. alumino-silicate materials) are an alternative for applications in which Portland cements are inappropriate. In a previous work, we proposed a direct immobilization of organic liquid waste in a geopolymer binder (GEOIL composite). We demonstrated the feasibility for producing various composites on model system (hexadecane) and on a hydraulic oil, which are dispersed in the geopolymer binder as droplets (10-50 μm typical size). In nuclear facilities, legacy waste based on organic liquids are currently stored. Many of them have been used for various applications in the nuclear industry (lubrication, cutting, analysis, liquid/liquid extraction..) with very wide chemical compositions. In this study, we study the influence of various commercial organic oils immobilized in hardened geopolymer emulsions by X-ray micro-tomography. Image analysis make it possible to determine the 3D spatial and size distributions of oil droplets in geopolymer emulsions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Spent Nuclear Fuel Package Consolidation using Metallic Void Fillers

This study introduces the idea of a consolidated spent nuclear fuel (SNF) package, formed by casting a metal into a SNF canister to fill any accessible void spaces. It is well known that castings experience shrinkage during cooling resulting in air gaps between the filler and its boundaries. For a consolidated SNF package, the air gap formed between the metallic filler and package components would have a negative impact on the thermal effusivity benefit offered by the filler. Here we present one solution to this challenge based on thermodynamic/solidification and metallic bonding principles. The key idea here is to pre-coat the package components with a low melting point metal, and to oxidize the coating instead of the components during the pre-heating step of the casting process. This allows for wetting of the boundary with the filler metal without the use of a flux that wouldn't survive the preheat temperature and could also contaminate the boundary with corrosive compounds. Potential benefits of successfully adopting this idea are twofold. First, improved heat diffusion inside the package due to the absence of the gap, which is significant for conceptual SNF with higher decay heat and high peak to average ratio. Second, improved proliferation resistance by making the fissile material recovery process more complex. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Density of Spray-Formed Materials

Spray Forming is an advanced materials processing technology that transforms molten metal into a near-net-shape solid by depositing atomized droplets onto a substrate. Depending on the application, the spray-formed material may be used in the as-deposited condition or it may undergo post-deposition processing. Regardless, the density of the as-deposited material is an important issue. Porosity is detrimental because it can significantly reduce strength, toughness, hardness and other properties. While it is not feasible to achieve fully-dense material in the as-deposited state, density greater than 99% of theoretical density is possible if the atomization and impact conditions are optimized. Thermal conditions at the deposit surface and droplet impact angle are key processing parameters that influence the density of the material. This paper examines the factors that contribute to porosity formation during spray forming and illustrates that very high as-deposited density is achieved by optimizing processing parameters.

99 GENERAL AND MISCELLANEOUS↗