Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface backgrounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Technical background, chapter 3, part B

A description is given of the physics of electromagnetic scattering from the sea and a guideline is presented to relate an observable (such as the radar cross section) to the hydrodynamics or physical properties of the sea. As specific examples of the interdisciplinary science of electromagnetics and geophysical oceanography, the physics is discussed in connection with data provided by three instruments: namely, the scatterometer, the altimeter, and the imaging radar. The data provided by each instrument are discussed in context with specular point and Bragg scattering theories. Finally, the degrading effect of extraneous sources of noise is discussed as a limiting mechanism of the accuracy of the ocean surface measurement.

Source record↗

Highly efficient separation membrane based on cellulose acetate/chitosan fibrous composite substrate with activated carbon functional adsorption layer

Abstract BACKGROUND For improving the permeability and selectivity of adsorption separation membranes, membrane materials, structural morphology and separation technology must continue to be investigated. Development of a membrane that is environmentally friendly, cost‐effective and with high filter precision is an important direction in current research. RESULTS The air pressure spraying method was used to prepare an activated carbon (AC)–cellulose acetate/chitosan (CA/CS) composite membrane. The CA/CS fiber composite membrane was prepared as substrate layer, and AC was loaded on the surface of the CA/CS composite membrane as a functional adsorption layer. When the spraying pressure was 0.01 MPa and the mass ratio of AC/CS was 2:1, a composite membrane with even and compact morphology could be obtained. Both the compact AC functional layer and complete CA/CS substrate layer endowed the AC–CA/CS composite membrane with an excellent water filtration property. At low feeding pressure, the permeate flux and rejection rate of bisphenol A (BPA) could reach 9.27 × 10 3 L m −2 h −1 and 98.31%, respectively. Meanwhile, the adsorption capacities of the membrane were investigated. It tended to equilibrate quickly in 2 min for dyes and BPA. The equilibrium adsorption capacities of the membrane for acid blue, acid yellow and BPA were 175.80, 164.0815 and 79.58 mg g −1 , respectively. The adsorption process conformed to pseudo‐second‐order kinetics and the Langmuir monolayer adsorption model. CONCLUSIONS This work could provide a practical and effective feasibility for membrane separation technology. © 2020 Society of Chemical Industry (SCI)

Zhao, Xiaoyan↗

Evolution of dwarf spheroidal satellites in the common surface-density dark halos

We investigate the growth histories of dark matter halos associated with dwarf satellites in Local Group galaxies and the resultant evolution of the baryonic component. Our model is based on the recently proposed property that the mean surface density of a dark halo inside a radius at maximum circular velocity V{sub max} is universal over a large range of V{sub max}. Given that a surface density of 20 M {sub ⊙} pc{sup −2} well explains dwarf satellites in the Milky Way and Andromeda, we find that the evolution of the dark halo in this common surface-density scale is characterized by the rapid increase of the halo mass assembled by the redshift z{sub TT} of the tidal truncation by its host halo, at early epochs of z{sub TT}≳6 or V{sub max}≲22 km s{sup −1}. This mass growth of the halo is slow at lower z{sub TT} or larger V{sub max}. Taking into account the baryon content in this dark halo evolution, under the influence of the ionizing background radiation, we find that the dwarf satellites are divided into roughly two families: those with V{sub max}≲22 km s{sup −1} having high star formation efficiency and those with larger V{sub max} having less efficient star formation. This semianalytical model is in agreement with the high-resolution numerical simulation for galaxy formation and with the observed star formation histories for Fornax and Leo II. This suggests that the evolution of a dark halo may play a key role in understanding star formation histories in dwarf satellites.

79 ASTRONOMY AND ASTROPHYSICS↗

Resolved Dwarf Galaxy Searches within ~5 Mpc with the Vera Rubin Observatory and Subaru Hyper Suprime-Cam*

We present a preview of the faint dwarf galaxy discoveries that will be possible with the Vera C. Rubin Observatory and Subaru Hyper Suprime-Cam in the next decade. In this work, we combine deep ground-based images from the Panoramic Imaging Survey of Centaurus and Sculptor (PISCeS) and extensive image simulations to investigate the recovery of faint, resolved dwarf galaxies in the Local Volume with a matched-filter technique. We adopt three fiducial distances - 1.5, 3.5, 5 Mpc, and quantitatively evaluate the effects on dwarf detection of varied stellar backgrounds, ellipticity, and Milky Way foreground contamination and extinction. We show that our matched-filter method is powerful for identifying both compact and extended systems, and near-future surveys will be able to probe at least ~4.5 mag below the tip of the red giant branch (TRGB) for a distance of up to 1.5 Mpc, and ~2 mag below the TRGB at 5 Mpc. This will push the discovery frontier for resolved dwarf galaxies to fainter magnitudes, lower surface brightnesses, and larger distances. Our simulations show the secure census of dwarf galaxies down to $M_{V}$$\approx$-5, -7, -8, will be soon within reach, out to 1.5 Mpc, 3.5 Mpc, and 5 Mpc, respectively, allowing us to quantify the statistical fluctuations in satellite abundances around hosts, and parse environmental effects as a function of host properties.

79 ASTRONOMY AND ASTROPHYSICS↗

Active transition fixing and control of the boundary layer in air

Active transition of flow over an airfoil surface and feedback control by sound is investigated in a wind tunnel at Caltech. Laminar instability forced by localized time dependent nonintrusive narrow heating strip causes abrupt changes in velocity to trigger instant transition at favorable pressure gradient. At zero and adverse pressure gradients these changes are only marginal. Feedback control by sound interaction at nearly normal incidence produces significant reduction in velocity perturbation in regions of transition. This reduction is in part at the expense of an increase in background disturbance since it is not possible to restore the flow to its undisturbed state.

Maestrello, L.↗

Passive intermodulation generation in wire mesh deployable reflector antennas

Deployable reflector antennas represent a proven technology with obvious benefits for mobile satellite applications. Harris Corporation has provided deployable reflector antennas for NASA's Tracking and Data Relay Satellite System (TDRSS). These antennas utilize a rigid, radial rib unfurlable reflector with a wire mesh surface. This type of mesh has been identified as a potential design risk for multichannel communications applications based on the potential for generation of Passive Intermodulation (PIM). These concerns are based on the existence of numerous, nonpermanent metal to metal contacts that are inherent to the mesh design. To address this issue, Harris has an ongoing IR&D program to characterize mesh PIM performance. This paper presents the results of the investigation into mesh PIM performance to date and provides background information on the design and performance of the Harris radial rib deployable reflector.

Turner, Gregory M.↗

Laboratory Plasma Source as an MHD Model for Astrophysical Jets

The significance of the work described herein lies in the demonstration of Magnetized Coaxial Plasma Gun (MCG) devices like CPS-1 to produce energetic laboratory magneto-flows with embedded magnetic fields that can be used as a simulation tool to study flow interaction dynamic of jet flows, to demonstrate the magnetic acceleration and collimation of flows with primarily toroidal fields, and study cross field transport in turbulent accreting flows. Since plasma produced in MCG devices have magnetic topology and MHD flow regime similarity to stellar and extragalactic jets, we expect that careful investigation of these flows in the laboratory will reveal fundamental physical mechanisms influencing astrophysical flows. Discussion in the next section (sec.2) focuses on recent results describing collimation, leading flow surface interaction layers, and turbulent accretion. The primary objectives for a new three year effort would involve the development and deployment of novel electrostatic, magnetic, and visible plasma diagnostic techniques to measure plasma and flow parameters of the CPS-1 device in the flow chamber downstream of the plasma source to study, (1) mass ejection, morphology, and collimation and stability of energetic outflows, (2) the effects of external magnetization on collimation and stability, (3) the interaction of such flows with background neutral gas, the generation of visible emission in such interaction, and effect of neutral clouds on jet flow dynamics, and (4) the cross magnetic field transport of turbulent accreting flows. The applicability of existing laboratory plasma facilities to the study of stellar and extragalactic plasma should be exploited to elucidate underlying physical mechanisms that cannot be ascertained though astrophysical observation, and provide baseline to a wide variety of proposed models, MHD and otherwise. The work proposed herin represents a continued effort on a novel approach in relating laboratory experiments to astrophysical jet observation. There exists overwhelming similarity among these flows that has already produced some fascinating results and is expected to continue a high pay off in future flow similarity studies.

Mayo, Robert M.↗

Ambient Mass Spectrometry Rapid Analysis Methods for Trace Inorganics

The ability to rapidly detect and characterize the chemistry of trace quantities of inorganic species has multiple potential applications, including nuclear safeguards, nuclear forensics, and environmental monitoring. Some mass spectrometric methods currently exist, but they are costly and time-intensive, often destroying chemical information in the process of ionization. Ambient mass spectrometry is a relatively new analytical method in which samples are introduced to the mass spectrometer from atmospheric pressure, rather than from high vacuum. Ambient MS can operate with gentler ionization methods such as electrospray ionization (ESI) and paper-spray ionization (PSI), reducing fragmentation and preserving the chemical information of the analyte. This may be useful for determining the intended purpose of material in a sample. Strontium, part of nuclear fallout, is analyzed here to test these new analytical methods for viability. Electrospray ionization mass spectrometry functions by spraying the sample as a solution through a needle charged to a few kV. A nebulizing gas flows out along with the sample to create the spray before droplets enter a drying chamber with heated drying gas to remove the solvent molecules. From there bare analyte ions enter the mass spectrometer. This method has the advantage of relatively fast sample preparation and stable ionization. More stable ionization produces higher-quality data. Paper-spray ionization mass spectrometry operates by applying sample to a paper triangle. The paper triangle is then electrified in a metal clamp to a few kV before spray solvent is applied. The spray solvent transports analyte in the sample to the tip, where it is ionized and enters the mass spectrometer. One advantage of this method is reduced sample preparation - an analyst can even swipe a surface and cut a triangle directly from the swipe. The data analysis serves to rapidly process tens of samples all at once. The mass spectrometer outputs a file containing a few hundred spectra for each sample. The pipeline processes each one to identify peaks of interest. A full palette of data analysis metrics are generated, including plots of the raw data and plots of calculated values such as isotopic ratios. The pipeline filters the raw data to remove noise and background peaks, as well as peaks representing detector saturation. A heat map is generated to show the overall spectrum in mass-time- intensity space. Post-processing, we obtained the desired calibration curves, demonstrating that both ESI-MS and PSI-MS are viable methods for quantifying trace amounts of inorganics while retaining their chemical speciation information. ESI-MS demonstrated a linear response region of 100 ppb to 20 ppm, with a limit-of-detection of around 100 ppb. At top left is an example spectrum with the {sup 88}SrNO{sub 3} peak identified to show the retention of chemical speciation. PSI-MS showed a linear response region of around 1 ppb to 1 ppm, with a limit-of-detection of near 1 ppb. PSI-MS produced more erratic results than ESI-MS, likely due to the variability in ionization resulting from manual positioning of the paper triangle near the MS inlet. Future efforts will focus on improving the repeatability of PSI-MS as well as analyzing other species of interest such as cerium and uranium. Improvements will also be made to create more reliable data extraction and intelligent data filtering.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Tropospheric Ozone in the NASA GEOS Model: Effects of Satellite Data Assimilation and Improvements in Background NO x Chemistry

Tropospheric ozone is a major atmospheric oxidant, the primary source of the hydroxyl radical, and a greenhouse gas. In the troposphere, it is produced from the oxidation of carbon monoxide and volatile organic compounds in the presence of nitrogen oxides (NO x =NO+NO 2 ) or has its origins in the stratosphere. The tropospheric ozone burdens in global atmospheric chemistry models disagree by a factor of 1.5, indicating an incomplete understanding of ozone sources and sinks. Here we examine the tropospheric ozone simulation in NASA Global Modeling and Assimilation Office’s (GMAO’s) GEOS model with the GEOS-Chem chemistry mechanism (version 14.2), using observations from satellites, aircraft, ozonesondes, and surface sites. This modeling framework is used to produce GMAO’s GEOS Composition Forecasts (GEOS-CF), and it has been updated extensively with new emission inventories, improved model physics, satellite data assimilation capability, and an up-to-date chemical mechanism that includes tropospheric halogen chemistry and NOx recycling from particulate nitrate. Earlier versions of the model using GEOS-Chem version 12.0 showed an underestimate in tropospheric ozone in the northern hemisphere. We evaluate the ozone simulation in the updated model, focusing on the effects of assimilating satellite NO 2 data from the Ozone Monitoring Instrument (OMI), constraining stratospheric ozone to satellite data, and updates to the NOx chemistry. We will examine changes in the vertical profiles of tropospheric ozone over the US in support of the Tropospheric Emissions: Monitoring of Pollution (TEMPO), and discuss implications for the tropospheric ozone budget.

Viral Shah↗

Size and Stoichiometry Effects on the Reactivity of MoCy Nanoparticles Towards Ethylene

Molybdenum carbides are promising catalysts alternative to Pt-group metals for the hydrogenation of unsaturated hydrocarbons. Nanostructuring has been shown to be an efficient way to boost the catalytic activity of these materials with MoCy nanoparticles (NPs) exhibiting a good performance when encapsulated inside zeolites or dispersed on inert supports such as carbon or gold. In this work, we focus on a systematic DFT study of the interaction of MoCy NPs with ethylene (C 2 H 4 ), as a general and simple approach for examining binding and activation of C≡C bonds. Models for 14 NPs, with a Mo/C ratio in the 0.67 to 2.00 range, have been built following a cascade procedure. Several chemical descriptors, including the adsorption energy, structural NPs distortion, C≡C deformation, and C 2 H 4 attachment energy have been analyzed along with a meticulous geometric and electronic characterization of bare NPs and C2H4 binding. The present results show that 1:1 stoichiometric Mo 6 C 6 , Mo 12 C 12 , and Mo 24 C 24 , and the non-stochiometric Mo 4 C 6 , Mo 8 C 12 (MetCar), and Mo 14 C 13 (Nanocube) are excellent systems for the binding and activation of ethylene, exhibiting a much bigger reactivity than a bulk δ-MoC(001) surface with a similar Mo:C ratio. In addition, C 2 H 4 binding on the NPs with a Mo/C < 1.08 is advantageous since, apart from a rather large adsorption energy, implies low energy values for NPs deformation (from 0.00 to 0.31 eV), C≡C distortion (from 0.30 to 0.52 eV), and C 2 H 4 attachment (from -2.12 to -2.58 eV). These theoretical results point to the ideal MoCy size and composition for C 2 H 4 binding, providing a background for further experimental studies aimed at the preparation of MoCy NPs as hydrogenation catalysts.

36 MATERIALS SCIENCE↗

Carbene Functionalization of Monolayer Tungsten Disulfide for Enhanced Quantum Emission

Semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDs) are promising materials for an array of applications, ranging from conventional field-effect transistors, photodetectors, and light-emitting diodes to their more recent use in quantum photonic technologies. Chemical functionalization of 2D TMDs with organic ligands and adlayers provides an additional means for customizing their electronic and optical properties. While many pathways have been reported for the chemical functionalization of 2D TMDs, their frequent reliance on solution-based methods results in limited control over adlayer thickness and coverage, thus hindering utility in high-performance applications. Here, in this study, we describe the vapor-phase functionalization of a 2D TMD with carbene ligands, specifically tungsten disulfide (WS 2 ) with N-heterocyclic carbenes (NHCs), resulting in molecularly smooth, thin, and uniform adlayers. Reacting NHCs with monolayer WS 2 reduces the broad photoluminescence background observed at cryogenic temperatures by 58%, which facilitates the detection of single-photon emitters from strained monolayer WS 2 , as indicated by second order correlation values ( g (2) ) as low as 0.17 ± 0.07. Chemical characterization coupled with density functional theory calculations suggests that the NHC adlayer has a dual defect-passivation and doping effect on monolayer WS 2 that results in enhanced single-photon emission. Overall, this study establishes vapor-phase carbene functionalization as a homogeneous surface modification scheme for tailoring the quantum emission properties of semiconducting 2D TMDs.

N-heterocyclic carbenes↗

A parametric study of the linear growth of magnetospheric EMIC waves in a hot plasma

Since electromagnetic ion cyclotron (EMIC) waves in the terrestrial magnetosphere play a crucial role in the dynamic losses of relativistic electrons and energetic protons and in the ion heating, it is important to pursue a comprehensive understanding of the EMIC wave dispersion relation under realistic circumstances, which can shed significant light on the generation, amplification, and propagation of magnetospheric EMIC waves. The full kinetic linear dispersion relation is implemented in the present study to evaluate the linear growth of EMIC waves in a multi-ion (H{sup +}, He{sup +}, and O{sup +}) magnetospheric plasma that also consists of hot ring current protons. Introduction of anisotropic hot protons strongly modifies the EMIC wave dispersion surface and can result in the simultaneous growth of H{sup +}-, He{sup +}-, and O{sup +}-band EMIC emissions. Our parametric analysis demonstrates that an increase in the hot proton concentration can produce the generation of H{sup +}- and He{sup +}-band EMIC waves with higher possibility. While the excitation of H{sup +}-band emissions requires relatively larger temperature anisotropy of hot protons, He{sup +}-band emissions are more likely to be triggered in the plasmasphere or plasmaspheric plume where the background plasma is denser. In addition, the generation of He{sup +}-band waves is more sensitive to the variation of proton temperature than H{sup +}-band waves. Increase of cold heavy ion (He{sup +} and O{sup +}) density increases the H{sup +} cutoff frequency and therefore widens the frequency coverage of the stop band above the He{sup +} gyrofrequency, leading to a significant damping of H{sup +}-band EMIC waves. In contrast, O{sup +}-band EMIC waves characteristically exhibit the temporal growth much weaker than the other two bands, regardless of all considered variables, suggesting that O{sup +}-band emissions occur at a rate much lower than H{sup +}- and He{sup +}-band emissions, which is consistent with the observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High Temperature Thermographic Phosphor Coatings Development

For many years, phosphor thermometry has been used for non-contact temperature measurements. A large number of applications have been associated with high temperatures, especially for aerospace systems where blackbody radiation backgrounds are large and in challenging environments, such as vibration, rotation, flame, or noise. These environments restrict the use of more common thermocouples or infrared thermometric techniques. In particular, temperature measurements inside jet turbines, rocket engines, or similar devices are especially amenable to phosphor techniques. Often the fluorescent materials are used as powders, either suspended in binders and applied like paint or applied as high-temperature sprays. Thin coatings that are less than 50 m thick are used on the surfaces of interest. These coatings will quickly assume the same temperature as the surface to which they are applied. The temperature dependence of fluorescent materials is a function of the base matrix atoms and a small quantity of added activator or dopant ions. Often for high temperature applications, the selected materials are refractory and include rare earth ions. Phosphors like Y3Al5O12 (YAG) doped with Eu, Dy, or Tm, Y2O3 doped with Eu, or similar rare earth compounds, will survive high temperatures and can be configured to emit light that changes rapidly in lifetime and intensity. For example, researchers at Oak Ridge National Laboratory recently observed fluorescence from YAG:Dy and YAG:Tm at temperatures above 1400 C. One of the biggest challenges is to locate a binder material that can withstand tremendous variations in temperature in an adverse aerospace environment. This poster will provide an overview into our attempt to utilize phosphors for thermometry purposes. Emphasis will be placed on the use of selected binder materials that can withstand high temperatures. This research was completed for the National Aeronautics and Space Administration's Glenn Research Center in Cleveland, Ohio.

Goedeke, Shawn↗

Meteoroid-Induced Anomalies on Spacecraft

Sporadic meteoroid background is directional (not isotropic) and accounts for 90 percent of the meteoroid risk to a typical spacecraft. Meteor showers get all the press, but account for only approximately10 percent of spacecraft risk. Bias towards assigning meteoroid cause to anomalies during meteor showers. Vast majority of meteoroids come from comets and have a bulk density of approximately 1 gram per cubic centimeter (ice). High speed meteoroids (approximately 50 kilometers per second) can induce electrical anomalies in spacecraft through discharging of charged surfaces (also EMP (electromagnetic pulse?).

Cooke, Bill↗

The Geographic Distribution of Boulder Halo Craters at Mid-to-High Latitudes on Mars

Extensive evidence exists for ground ice at mid-to-high latitudes on Mars, including results from neutron spectroscopy [1-3], thermal properties [4-5], geomorphology [e.g., 6-9], and the in situ observations of Mars Phoenix [10]. This ground ice has been hypothesized to be emplaced diffusively and fill pores [11], or to have accumulated by ice and dust deposition that draped or mantled the terrain [7, 12]. These two processes are not mutually exclusive; both potentially have occurred on Mars [5]. One of the landforms found in areas where ground ice is common on Mars are boulder halo craters [e.g., 13-15] (Figure 1), which are topographically muted impact craters that are filled by ice-rich regolith. They are outlined by boulders that trace a circular outline of the original crater rim. Boulder halos generally have distinctly higher boulder densities than the surrounding background plains and have few boulders in their interiors. The mechanism of boulder halo crater formation is somewhat uncertain. Our working model is that an impact event occurs with sufficient size to excavate to a depth greater than the boulder-poor, ice-rich soils. Excavated boulders are deposited around the crater's rim and in its proximal ejecta. Quite rapidly [14], the crater becomes infilled by icy soil. Rather than being buried, boulders in the halo remain at the surface, perhaps be-cause they 'float' relative to finer-grained materials [14, 16]. Regardless of the details of this process, the life-time of boulders at the surface is much greater than the timescale needed to remove most of the craters' topography. Physical weathering of rocks must be greatly out-paced by crater infilling (the opposite of what is typical, e.g., on the Moon [17]). The rapidity of this infilling is easiest to understand if icy mantling material is deposited and accumulates, rather than simply being added by pore filling of soils. If this model is correct, boulder halos only form when they excavate rock-producing materials from beneath the upper surface. Thus, the distribution and size of craters that result in boulders halos may provide in-sight into the thickness of the ice-rich surface layer in different locations. Note that this thickness is necessarily that of the ice-rich layer at the time of impact, not at present. This study is an initial survey of boulder halo crater locations in the 50deg to 80degN and 50deg to 80degS latitude bands on Mars.

Ice↗

Representation of Tropical Storms by the Modern-Era Retrospective Analysis for Research and Applications Version 2

This study examines the veracity of the tropical cyclone (TC) statistics estimated from the Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2) global atmospheric reanalysis, focusing on the climatological-mean genesis regions, tracks and their lifetime maximum intensity, as well as the interannual and intraseasonal variations in TC activity. The results are validated against the International Best Track Archive for Climate Stewardship (IBTrACS) data for 1980-2016. MERRA-2 represents the spatial distribution of the TC genesis location and the tracks realistically well over all main development regions (MDRs), but with notable discrepancies including too weak TC activity over the Arabian Sea and the South China Sea and too strong activity over the North Indian Ocean. Over the western North Pacific and the North Atlantic, MERRA-2 underestimates recurving TCs steered by background westerlies in the mid-latitudes and thereby exaggerates northwestward moving TCs, resulting in an overestimate of the landfall probability in East Asia and North America. Excessive development of TCs over the Bay of Bengal also tends to exaggerate the landfall probability in India. In spite of the discrepancies in the annual TC number, the seasonal variation of TC genesis is realistic in MERRA-2. MERRA-2 also captures the TC intensity relationship between the minimum pressure and the maximum surface wind speed at the mature stage, although the maximum intensity is weaker than in the observations. While MERRA-2 tends to reproduce the interannual variations of the observed TC number and the power dissipation index (PDI), the level of accuracy depends on the region. MERRA-2 describes the changes in the TC genesis region and tracks realistically according to the different phases of El Nino and the Southern Oscillation (ENSO) and the Madden-Julian Oscillation (MJO), although it is less realistic over the North Indian Ocean.

International Best Track Archive for Climate Stewa↗

SUB-KILOPARSEC IMAGING OF COOL MOLECULAR GAS IN TWO STRONGLY LENSED DUSTY, STAR-FORMING GALAXIES

We present spatially resolved imaging obtained with the Australia Telescope Compact Array (ATCA) of three CO lines in two high-redshift gravitationally lensed dusty star-forming galaxies, discovered by the South Pole Telescope. Strong lensing allows us to probe the structure and dynamics of the molecular gas in these two objects, at z = 2.78 and z = 5.66, with effective source-plane resolution of less than 1 kpc. We model the lensed emission from multiple CO transitions and the dust continuum in a consistent manner, finding that the cold molecular gas as traced by low-J CO always has a larger half-light radius than the 870 μm dust continuum emission. This size difference leads to up to 50% differences in the magnification factor for the cold gas compared to dust. In the z = 2.78 galaxy, these CO observations confirm that the background source is undergoing a major merger, while the velocity field of the other source is more complex. We use the ATCA CO observations and comparable resolution Atacama Large Millimeter/submillimeter Array dust continuum imaging of the same objects to constrain the CO–H{sub 2} conversion factor with three different procedures, finding good agreement between the methods and values consistent with those found for rapidly star-forming systems. We discuss these galaxies in the context of the star formation—gas mass surface density relation, noting that the change in emitting area with observed CO transition must be accounted for when comparing high-redshift galaxies to their lower redshift counterparts.

79 ASTRONOMY AND ASTROPHYSICS↗

The skin microbiome of elasmobranchs follows phylosymbiosis, but in teleost fishes, the microbiomes converge

Background: The vertebrate clade diverged into Chondrichthyes (sharks, rays, and chimeras) and Osteichthyes fishes (bony fishes) approximately 420 mya, with each group accumulating vast anatomical and physiological differences, including skin properties. The skin of Chondrichthyes fishes is covered in dermal denticles, whereas Osteichthyes fishes are covered in scales and are mucous rich. The divergence time among these two fish groups is hypothesized to result in predictable variation among symbionts. Here, using shotgun metagenomics, we test if patterns of diversity in the skin surface microbiome across the two fish clades match predictions made by phylosymbiosis theory. In this work, we hypothesize (1) the skin microbiome will be host and clade-specific, (2) evolutionary difference in elasmobranch and teleost will correspond with a concomitant increase in host-microbiome dissimilarity, and (3) the skin structure of the two groups will affect the taxonomic and functional composition of the microbiomes. Results: We show that the taxonomic and functional composition of the microbiomes is host-specific. Teleost fish had lower average microbiome within clade similarity compared to among clade comparison, but their composition is not different among clade in a null based model. Elasmobranch’s average similarity within clade was not different than across clade and not different in a null based model of comparison. In the comparison of host distance with microbiome distance, we found that the taxonomic composition of the microbiome was related to host distance for the elasmobranchs, but not the teleost fishes. In comparison, the gene function composition was not related to the host-organism distance for elasmobranchs but was negatively correlated with host distance for teleost fishes. Conclusion: Our results show the patterns of phylosymbiosis are not consistent across both fish clades, with the elasmobranchs showing phylosymbiosis, while the teleost fish are not. The discrepancy may be linked to alternative processes underpinning microbiome assemblage, including possible historical host-microbiome evolution of the elasmobranchs and convergent evolution in the teleost which filter specific microbial groups. Our comparison of the microbiomes among fishes represents an investigation into the microbial relationships of the oldest divergence of extant vertebrate hosts and reveals that microbial relationships are not consistent across evolutionary timescales.

59 BASIC BIOLOGICAL SCIENCES↗