Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Why ionizing radiation enhances surface wettability

Radiation-Induced Surface Activation is an inherent phenomenon where surfaces that are exposed to gamma irradiation are observed to undergo an increase in wettability. This increase in wettability as a result of the ionizing radiation exposure has so far been demonstrated to have a pronounced impact on Leidenfrost temperature and two-phase fluid dynamics. Test results from previous experiments have shown that incorporation of this effect on heat transfer equipment design may increase the thermal-hydraulic margin leading to higher thermal efficiency. However, the mechanism behind the increased wettability is not clearly understood. In the present work, three different materials (Zircaloy-4, 316 stainless steel, and copper) were exposed at two different dose rates with use of two different gamma irradiation facilities. A detailed surface characterization on the post-irradiated samples is carried out to understand the changes in surface chemistry, wettability and surface morphology. It is observed from the experiments that the increase in wettability upon irradiation depended on the total dose and not on the dose rate. Moreover, localized oxidation and porosity induced by radiolysis was seen to be the predominant mechanism behind increased wettability which leads to improved Leidenfrost temperature.

Seshadria, Arunkumar↗

Characterization of Stress Corrosion Cracking Initiation Precursors in Cold-Worked Alloy 690 Using Advanced High-Resolution Microscopy

Although highly cold-worked UNS N06690 has been shown to be susceptible to stress corrosion crack growth in pressurized water reactor primary water, it is unclear whether cold-work promotes stress corrosion crack initiation under constant load test conditions. To evaluate the stress corrosion cracking initiation response, constant load tensile and blunt notch compact tension testing were performed on 21% and 31% cold-worked samples from two thermally treated UNS N06690 materials in 360 °C simulated pressurized water reactor primary water. High-resolution examinations were conducted mid- and post-test to record the evolution of grain boundary precursor damage and intergranular crack nucleation by focused ion beam milling combined with scanning electron microscopy and by transmission electron microscopy. The surface and sub-surface morphology of intergranular cavities, local corrosion and shallow cracks were documented. Nanometer-sized cavities were observed associated with grain boundary carbides in all specimens. The 31% cold-work specimens consistently exhibited shallow intergranular cracks with oxidized crack flanks and a high density of cavities ahead of the oxide front. Three-dimensional distribution of carbides and cavities ahead of the cracked grain boundaries was analyzed to gain mechanistic insights into the processes that lead to crack initiation in highly cold-worked UNS N06690.

36 MATERIALS SCIENCE↗

Search for Q ~0 Order near a Forbidden Bragg Position in Bi 2.1 Sr 1.9 CaCu 2 O 8+x with Resonant Soft X-ray Scattering

Identifying what broken symmetries are present in the cuprates has become a major area of research. Many authors have reported evidence for so-called “Q ~ 0” order that involves broken inversion, mirror, chiral, or time-reversal symmetry that is uniform in space. Not all these observations are well understood and new experimental probes are needed. Here we use resonant soft x-ray scattering (RSXS) to search for Q ~ 0 order in Bi 2.1 Sr 1.9 CaCu 2 O 8+x (Bi-2212) by measuring the region of a forbidden Bragg peak, (0,0,3), which is normally extinguished by symmetry but may become allowed on resonance if valence band order is present. Using circularly polarized light, we found that this reflection becomes allowed on the CuL 3 resonance for temperatures T c < T < T*, though remains absent in linear polarization and at other temperatures. This observation suggests the existence of spatially uniform valence band order near the pseudogap temperature. In addition, we observed periodic oscillations in the specular reflectivity from the sample surface that resemble thin film interference fringes, though no known film is present. These fringes are highly resonant, appear in all polarizations, and exhibit a period that depends on the location where the beam strikes the sample surface. We speculate that these fringes arise from interaction between some intrinsic valence band instability and extrinsic structural surface morphologies of the material. Our study supports the existence of some kind of Q ~ 0 broken symmetry state in Bi-2212 at intermediate temperatures. Further studies using a microfocused beam, which could disentangle microscopic effects from macroscopic heterogeneities, are needed to ascertain the universality of the effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observations of actively forming lava tubes and associated structures, Hawaii, part 2

A ground examination is made of lave tubes and channels. The surface morphology and the changes noted through lava flow activity are cited, and compared to earlier aerial observations. The lava activity was believed to be caused by a small lava lake exposed by the collapse of a crust covering it. Drainage of the lake was caused by a fissure erruption. New tubes or extensions of existing ones were noted from the flow. Molten lava was not seen in any tubes examined on the ground, but some of the flows were not sufficiently cooled to allow subsurface examination and survey of the tubes.

Greeley, R.↗

Thermomechanical and Thermochemical Behavior of a Hafnium-20 Percent Tantalum Alloy

An investigation was conducted to determine the thermomechanical and thermochemical behavior of a high temperature, oxidation resistant, hafnium-20 percent tantalum alloy. The elastic and shear moduli of this alloy were determined in air up to 1000 C and in vacuum up to 2000 C using a mechanical resonance technique. The internal friction of the alloy was measured up to temperatures greater than 1400 C. Room temperature stress-strain behavior of the oxidized and unoxidized alloy was established. The effect of annealing on the elastic and shear moduli of the extruded rod material was investigated. The martensitic-type phase transformation occurring in the alloy was studied using hot stage metallography and electron microscopy. Static oxidation tests were conducted on the alloy at temperatures from 1000 C to 1700 C with weight gain measurements made as a function of time and temperatures. Surface morphology studies were conducted on the oxide coatings formed at the different temperatures using scanning electron microscopy and X-ray diffraction techniques.

Howell, J. P.↗

Study of recrystallization and devitrification of lunar glass

The technique of differential thermal analysis (DTA) was applied to the study of the Apollo 17 orange soil (74220,63) and the Apollo 16 glass coated anorthite (64455,21). These glasses show accentuated exotherms of strain relief in the annealing range which is indicative of rapid cooling. These are amenable to interpretation by comparison to the known history of synthetic glasses. Synthetic glasses were prepared whose similarity in behavior between the lunar glasses and their synthetic analogs is striking. Approximate rates of cooling of the lunar glasses were determined from comparative DTA of lunar and synthetic glasses and from the determination of the relation of strain relief in the annealing range to quench rate. At higher temperatures the glasses show exotherms of crystallization. The crystallization products associated with the exothermic reactions have been identified by X-ray diffraction and the surface morphologies developed by strain relief and crystallization have been characterized with scanning electron microscopy.

Ulrich, D. R.↗

Mercury's surface - Preliminary description and interpretation from Mariner 10 pictures

The surface morphology and optical properties of Mercury resemble those of the moon in remarkable detail and record a very similar sequence of events. Chemical and mineralogical similarity of the outer layers of Mercury and the moon is implied; Mercury is probably a differentiated planet with a large iron-rich core. Differentiation is inferred to have occurred very early. No evidence of atmospheric modification of landforms has been found. Large-scale scarps and ridges unlike lunar or Martian features may reflect a unique period of planetary compression near the end of heavy bombardment by small planetesimals.

Murray, B. C.↗

A scanning electron microscope study of olivine crystal surfaces

SEM photographs were taken of euhedral olivine grains from the Murchison C2 chondrite and several terrestrial and lunar occurrences. In general, the crystal faces of the meteorite grains are rough and uneven, with irregular growth patterns. They are very similar to crystal faces on terrestrial olivine grains that formed by sublimation from a vapor phase. They are very different from the relatively smooth and featureless surfaces of magmatic olivine crystals that precipitated from igneous melts. Qualitatively, the surface morphology of the crystal supports the contention that many euhedral crystals of olivine in C2 meteorites condensed from a gas phase.

Olsen, E. J.↗

Our present view of Mercury and Venus

The discipline of planetology received a quantum jump in new information on the planets Mercury and Venus from the Mariner 10 spacecraft. A detailed look at the ultraviolet markings in the upper atmosphere of Venus and their attendant motion has stimulated a considerable reevaluation of theories concerning the circulation, composition, and nature of this planet's upper atmosphere. The geologic history of Mercury as revealed by Mariner 10's television science data, from two close flybys, has challenged the prevalent theories of planetary evolution. The Mercury surface morphology and optical properties resemble those of the moon and seem to record a similar sequence of events despite their differences in density and proximity to both the sun and the asteroid belt.

Danielson, G. E., Jr.↗

Selected aspects of lunar mare geology from Apollo orbital photography

Crater size-frequency distributions were studied (100-500 m) and are shown to provide significant integrated information concerning mare surface ages, subsurface stratigraphy, and surficial geology. Equilibrium cratering is discussed gradually reducing the relative numbers of craters smaller than 300-400 m in diameter as surfaces age and regolith thickens. Results for surface ages are in good agreement with other published crater ages. The existing correlations of large ring structures among various circular mare basins are shown to be based on criteria that are inconsistent and nonstandardized. A means of comparing equivalent ring structures in the different maria is proposed which takes into account the important characteristics of young unflooded basins (Orientale) as well as the progressive development of tectonic and volcanic features within the older flooded maria. Specific geologic aspects of several of the lunar maria are discussed and especially Mare Smythii, because of its great age and significantly different surface morphology. Lunar photographs and maps are shown.

Young, R. A.↗

Hot tensile properties and deformation response of a gamma/Ni/-gamma prime/Ni3Al/-delta/Ni3Nb/ eutectic composite

Three distinct regions of tensile, deformation and fracture behavior were observed in a 2.5 wt. per cent Al gamma/gamma prime-delta eutectic alloy as the testing temperature was varied. The major finding was an extraordinary ductility maximum at about 550 C. It was shown that this phenomenon is caused by the deflection of transverse cracks at the eutectic grain boundaries when yielding occurs. This delamination between eutectics grains caused by fracture of a gamma prime eutectic grain boundary film leads to a distinctly different 'wood-like' fracture surface morphology. Above 690 C to 926 C, yield and tensile strength values decrease while ductility increase slightly. Cooperative twinning of both phases develops giving rise to block-like deformation of the microstructure quite in parallel to the behavior observed previously in the gamma-delta system.

Bertorello, H. R.↗

Mercurian volcanism questioned

It is noted that reports of the Mariner 10 television team favor a volcanic origin for the plains materials on Mercury. The present paper advances the argument that the Mercurian plains more closely resemble the lunar light plains (which are not of volcanic origin) in terms of stratigraphic relations, surface morphology, and albedo contrast. It is suggested that the plains on Mercury may have been formed from impact materials, possibly impact melts or other basin ejecta which behaved more like a fluid than did the lunar ejecta. It is concluded that if the old intercrater plains and younger smooth plains of Mercury were formed from impact materials, then Mercury underwent neither the volcanic interlude between early cratering episodes nor the late mare-type volcanic phase deduced by the Mariner 10 investigators.

Wilhelms, D. E.↗

Crystal growth from the vapour phase (ASTP experiment MA-085)

The positive effects of microgravity on crystal quality and fundamental properties of the vapor transport reaction were established by analyzing the results of three transport experiments on multi-component systems performed during the Apollo Soyuz Test Project (ASTP) mission. The systems employed were GeSe(0.99)Te(0.01) - GeI4 (A), GeS(0.98)Se(0.02) - GeCl4 (B), and GeS - GeCl4-Ar (C). The crystallographic analysis is based on a direct comparison of space and ground-based (prototype) crystals, employing X-ray diffraction, microprobe, microscopic, and chemical etching techniques. The results demonstrate a considerable improvement of the space-grown crystals in terms of chemical and crystalline homogeneity, surface morphology, and bulk perfection relative to ground specimens. The confirmation of greater mass transport rates than predicted for micro-gravity by present vapor transport models is of basic scientific and practical importance for the improvement of transport models and techniques on earth and for the development of a transport model for space conditions. The internal consistency and agreement between ASTP and Skylab results obtained for different compounds, transport agents, and temperature gradients strongly support the validity of these observations. The combined findings of improved crystal quality and high mass transport rates are of technological significance for space-processing applications.

Wiedemeier, H.↗

Crystal growth from the vapor phase. Experiment MA-085

The positive effects of microgravity on crystal quality and the fundamental properties of the vapor transport reaction were established by analyzing the results of three transport experiments on multicomponent systems performed during the Apollo-Soyuz Test Project mission. The systems employed were GeSe0.99Te0.01-GeI4(A), GeS0.98Se0.02-GeCl4(B), and GeS-GeCl4-Ar (C). The crystallographic analysis is based on a direct comparison of space and ground-based (prototype) crystals employing X-ray diffraction, microprobe, microscopic, and chemical etching techniques. The results demonstrate a considerable improvement of the space-grown crystals in terms of chemical and crystalline homogeneity, surface morphology, and bulk perfection relative to ground specimens.

Wiedemeier, H.↗

Germanium-silicon solid solutions

An experiment on melting and directional crystallization of an antimony (Sb) doped germanium silicon (GeSi) solid solution was designed for the Apollo-Soyuz Test Project (ASTP) to study the possibility of using zero-g conditions for obtaining solid-solution monocrystals with uniformly distributed components. Crystallization in the zero-g environment did not occur under ideal stationary growth and segregation conditions. Crystallization under zero-g conditions revealed the heterogeneous nature of Si and Sb distribution in the cross sections of crystals. The presence of the radial thermal gradient in the multipurpose furnace could be one of the reasons for such Si and Sb distribution. The structure of space-grown crystals correlates with the nature of heterogeneities of Si and Sb distribution in crystals. The type of surface morphology and the contour observed in space-grown crystals were never observed in ground-based crystals and indicate the absence of wetting of the graphitized walls of the ampoule by the melt during melting and crystallization.

Zemskov, V. S.↗

Preliminary findings of the Viking gas exchange experiment and a model for Martian surface chemistry

Earlier results reported from the Viking Lander-1 experiment are reexamined and interpreted in terms of a model of the Martian soil surface morphology and chemistry. Major events in the gas exchange experiment (GEX) first cycle are tabulated and data are presented on the sample processing and transport environments experienced by the soil samples. Oxygen and CO2 evolved from humidified Martian soil in GEX and slight changes in N2 present are investigated. A soil model involving iron oxide coating on silicate material is entertained to yield a mechanistic explanation of the experimental findings, and invocation of biotic processes is eschewed.

Oyama, V. I.↗