Search NASA⌕ Search

SEARCH · Search NASA

Results for “triangularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Finite element analysis of notch behavior using a state variable constitutive equation

The state variable constitutive equation of Bodner and Partom was used to calculate the load-strain response of Inconel 718 at 649 C in the root of a notch. The constitutive equation was used with the Bodner-Partom evolution equation and with a second evolution equation that was derived from a potential function of the stress and state variable. Data used in determining constants for the constitutive models was from one-dimensional smooth bar tests. The response was calculated for a plane stress condition at the root of the notch with a finite element code using constant strain triangular elements. Results from both evolution equations compared favorably with the observed experimental response. The accuracy and efficiency of the finite element calculations also compared favorably to existing methods.

Dame, L. T.↗
NASA NTRS1984

Spatial variation of sea surface temperature and flux-related parameters measured from aircraft in the JASIN experiment

Spatial variation of some parameters measured on two aircraft flying 100-km box and 200-km triangular patterns at low levels in the atmospheric boundary layer during the Joint Air Sea Interaction Experiment in the North Atlantic was studied. The variation should be representative of summer conditions in mid-latitude oceans. The variance density of remotely sensed sea surface temperature, corrected for sky reflection, is found to depend on the one-dimensional wave number raised to the power of approximately -5/3. Nonuniform clouds add low-frequency variance to observations of a downward looking radiometer and result in steeper slope of the spectra of uncorrected sea surface temperature. Turbulent fluxes of momentum, sensible heat, and moisture were determined with the bulk formulae from the parameters (wind speed, temperature, specific humidity, and sea surface temperature) measured from the aircraft. The averages of these fluxes over each flight leg were compared with the fluxes determined from the parameters averaged over the same leg. The difference is negligible, showing that spatially averaged observations, such as those from spaceborne sensors, can be used in the bulk formulae to evaluate the fluxes.

Liu, W. T.↗
NASA NTRS1984

Hybrid Semiloof elements for plates and shells based upon a modified Hu-Washizu principle

Hybrid SemiLoof elements for plates and shells are developed based upon modified Hu-Washizu principle. In the new version of the assumed stress hybrid formulation the equilibrium equations are satisfied through the introduction of internal displacement parameters as Lagrange multipliers. The inversion of the resulting H-matrices is simplified particularly when the stresses are expressed in terms of natural coordinates. A 24-DOF triangular element and a 32-DOF quadrilateral element based on shallow shell theory are derived and evaluated.

Pian, T. H. H.↗
NASA NTRS1982

Development of the cosmic ray techniques

It has been found that most advances of cosmic-ray physics have been directly related to the development of observational techniques. The history of observational techniques is discussed, taking into account ionization chambers, refinements applied to ionization chambers to make them suitable for an effective use in the study of cosmic radiation, the Wulf-type electrometer, the electrometer designed by Millikan and Neher, the Geiger-Mueller counter, the experiment of Bothe and Kolhoerster, the coincidence circuit, and a cosmic-ray 'telescope'. Attention is given to a magnetic lens for cosmic rays, a triangular arrangement of Geiger-Mueller counters used to demonstrate the production of a secondary radiation, a stereoscopic cloud-chamber photograph of showers, the cloud-chamber picture which provided the first evidence of the positive electron, and arrangements for studying photon components, mu-mesons, and air showers.

Rossi, B.↗
NASA NTRS1985

Convergence of Chahine's nonlinear relaxation inversion method used for limb viewing remote sensing

The application of Chahine's (1970) inversion technique to remote sensing problems utilizing the limb viewing geometry is discussed. The problem considered here involves occultation-type measurements and limb radiance-type measurements from either spacecraft or balloon platforms. The kernel matrix of the inversion problem is either an upper or lower triangular matrix. It is demonstrated that the Chahine inversion technique always converges, provided the diagonal elements of the kernel matrix are nonzero.

Chu, W. P.↗
NASA NTRS1984

Electron mobility in modulation-doped heterostructures

A model for electron mobility in a two-dimensional electron gas confined in a triangular well was developed. All major scattering processes (deformation potential and piezoelectric acoustic, polar optical, ionized impurity, and alloy disorder) were included, as well as intrasubband and intersubband scattering. The model is applied to two types of modulation-doped heterostructures, namely GaAs-GaAlAs and In(0.53)Ga(0.47)As-Al(0.52)In(0.48)As. In the former case, phonons and remote ionized impurities ultimately limit the mobility, whereas in the latter, alloy disorder is a predominant scattering process at low temperatures. The calculated mobilities are in very good agreement with recently reported experimental characteristics for both GaAs-Ga(1-x)Al(x)As and In(0.53)Ga(0.47)As-Al(0.52)In(0.48)As modulation-doped heterostructures.

Walukiewicz, W.↗
NASA NTRS1985

Reduction of background noise induced by wind tunnel jet exit vanes

The NASA-Langley 4 x 7 m wind tunnel develops low frequency flow pulsations at certain velocity ranges during open throat mode operation, affecting the aerodynamics of the flow and degrading the resulting model test data. Triangular vanes attached to the trailing edge of flat steel rails, mounted 10 cm from the inside of the jet exit walls, have been used to reduce this effect; attention is presently given to methods used to reduce the inherent noise generation of the vanes while retaining their pulsation reduction features.

Martin, R. M.↗
NASA NTRS1984

Crystal growth of GaAs in space

It is shown that stoichiometry variations in the GaAs melt during growth constitute the most critical parameter regarding defect formations and their interactions; this defect structure determines all relevant characteristics of GaAs. Convection in the melt leads to stoichiometric variations. Growth in axial magnetic fields reduces convection and permits the study of defect structure. In order to control stoichiometry in space and to accommodate expansion during solidification, a partially confined configuration was developed. A triangular prism is employed to contain the growth melt. This configuration permits the presence of the desired vapor phase in contact with the melt for controlling the melt stoichiometry.

Gatos, H. C.↗
NASA NTRS1982

Space station preliminary design report

The results of a 3 month preliminary design and analysis effort is presented. The configuration that emerged consists of a very stiff deployable truss structure with an overall triangular cross section having universal modules attached at the apexes. Sufficient analysis was performed to show feasibility of the configuration. An evaluation of the structure shows that desirable attributes of the configuration are: (1) the solar cells, radiators, and antennas will be mounted to stiff structure to minimize control problems during orbit maintenance and correction, docking, and attitude control; (2) large flat areas are available for mounting and servicing of equipment; (3) Large mass items can be mounted near the center of gravity of the system to minimize gravity gradient torques; (4) the trusses are lightweight structures and can be transported into orbit in one Shuttle flight; (5) the trusses are expandable and will require a minimum of EVA; and (6) the modules are anticipated to be structurally identical except for internal equipment to minimize cost.

Source record↗
NASA NTRS1983

Control of space stations

A study is made to develop controllers for the NASA-JSC Triangular Space Station and evaluate their performances to make recommendations for structural design and/or control alternatives. The control system design assumes the rigid body of the Space Station and developes the lumped parameter control system by using the Inverse Optimal Control Theory. In order to evaluate the performance of the control system, a Parameter Estimation algorithm is being developed which will be used in modeling an equivalent but simpler Space Station model. Finally, a scaled version of the Space Station is being built for the purpose of physical experiments to evaluate the control system performance.

Lee, K. Y.↗
NASA NTRS1986

Digital filtering and acceleration pulse interpretation

It was concluded that the post processing digital filter is quite effective for removing unwanted high frequency and noise without distorting the signal. In addition, digital filtering is effective for smoothing low-level low resolution digital data where the digital stairstep phenomena are pronounced. Integrating the acceleration data to obtain velocity traces is quite useful. The velocity change provides a check on the validity of the acceleration trace. (Zero offsets in acceleration must be removed before integrating.) Average accelerations can be obtained from the velocity trace by dividing the change in velocity for an acceleration pulse by the pulse duration. One can obtain the peak of an equivalent triangular pulse by doubling the average acceleration.

Pasanella, E. L.↗
NASA NTRS1986

Synchronously deployable truss structure

A collapsible-expandable truss structure, including first and second spaced surface truss layers having an attached core layer is described. The surface truss layers are composed of a plurality of linear struts arranged in multiple triangular configurations. Each linear strut is hinged at the center and hinge connected at each end to a nodular joint. A passive spring serves as the expansion force to move the folded struts from a stowed collapsed position to a deployed operative final truss configuration. A damper controls the rate of spring expansion for the synchronized deployment of the truss as the folded configuration is released for deployment by the restrain belts. The truss is synchronously extended under the control of motor driven spools.

Bush, H. G.↗
NASA NTRS1986

Enhancements to Sperry/NASTRAN

Reviewed is the enhancement to NASTRAN program performed by NUK (Nippon Univac Kaisha, Ltd.) added to Level 15.5. Features discussed include intermediate checkpoint-restart in triangular decomposition, I/O improvement, multibanked memory and new plate element. The first three improvements provide the capability to solve significantly large size problems, while the new elements release the analyst from the cumbersome work to constrain the singularities caused by the lack of stiffness of inplane rotation of old plate elements.

Koga, T.↗
NASA NTRS1986

A comparison of NASTRAN (Cosmic) and experimental results for the vibration of thick open cylindrical cantilevered shells

The natural frequencies and associated mode shapes for three thick open cantilevered cylindrical shells were determined both numerically and experimentally. The shells ranged in size from moderately to very thick with length to thickness ratios of 16, 8 and 5.6, the independent dimension being the shell thickness. The shell geometry is characterized by a circumferential angle of the 142 degrees and a ratio of length to inner radii arc length near 1.0. The finite element analysis was performed using NASTRAN's (COSMIC) triangular plate bending element CTRIA2, which includes membrane effects. The experimental results were obtained through holographic interferometry which enables one to determine the resonant frequencies as well as mode shapes from photographs of time-averaged holograms.

Mindle, W. L.↗
NASA NTRS1986

Aerodynamics of the Viggen 37 aircraft. Part 1: General characteristics at low speed

A description of the aerodynamics of the Viggen 37 and its performances, especially at low speeds is presented. The aerodynamic requirements for the design of the Viggen 37 aircraft are given, including the basic design, performance requirement, and aerodynamic characteristics, static and dynamic load test results and flight test results. The Viggen 37 aircraft is designed to be used for air attack, surveillance, pursuit, and training applications. It is shown that this aircraft is suitable for short runways, and has good maneuvering, acceleration, and climbing characteristics. The design objectives for this aircraft were met by utilizing the effect produced by the interference between two triangular wings, positioned in tandem.

Karling, K.↗
NASA NTRS1986

A simple algorithm for computing canonical forms

It is well known that all linear time-invariant controllable systems can be transformed to Brunovsky canonical form by a transformation consisting only of coordinate changes and linear feedback. However, the actual procedures for doing this have tended to be overly complex. The technique introduced here is envisioned as an on-line procedure and is inspired by George Meyer's tangent model for nonlinear systems. The process utilizes Meyer's block triangular form as an intermedicate step in going to Brunovsky form. The method also involves orthogonal matrices, thus eliminating the need for the computation of matrix inverses. In addition, the Kronecker indices can be computed as a by-product of this transformation so it is necessary to know them in advance.

Ford, H.↗
NASA NTRS1986

On realizations of least-squares estimation and Kalman filtering by systolic arrays

Least-squares (LS) estimation is a basic operation in many signal processing problems. Given y = Ax + v, where A is a m x n coefficient matrix, y is a m x 1 observation vector, and v is a m x 1 zero mean white noise vector, a simple least-squares solution is finding the estimated vector x which minimizes the norm of /Ax-y/. It is well known that for an ill-conditioned matrix A, solving least-squares problems by orthogonal triangular (QR) decomposition and back substitution has robust numerical properties under finite word length effect since 2-norm is preserved. Many fast algorithms have been proposed and applied to systolic arrays. Gentleman-Kung (1981) first presented the trianglular systolic array for a basic Givens reduction. McWhirter (1983) used this array structure to find the least-squares estimation errors. Then by geometric approach, several different systolic array realizations of the recursive least-squares estimation algorithms of Lee et al (1981) were derived by Kalson-Yao (1985). Basic QR decomposition algorithms are considered in this paper and it is found that under a one-row time updating situation, the Householder transformation degenerates to a simple Givens reduction. Next, an improved least-squares estimation algorithm is derived by considering a modified version of fast Givens reduction. From this approach, the basic relationship between Givens reduction and Modified-Gram-Schmidt transformation can easily be understood. This improved algorithm also has simpler computational and inter-cell connection complexities while compared with other known least-squares algorithms and is more realistic for systolic array implementation.

Chen, M. J.↗
NASA NTRS1986

EX-111 Thermal Emission from Hot White Dwarfs: The Suggested He Abundance-Temperature Correlation. EX-112: The Unique Emission Line White Dwarf Star GD 356

Progress in the EXOSAT data analysis program is reported. EXOSAT observations for four white dwarfs (WD1031-115, WD0004+330, WD1615-154, and WD0109-264) were obtained. Counting rates were unexpectedly low, indicating that these objects have a substantial amount of x-ray absorbing matter in their photosheres. In addition, soft x-ray pulsations characterized by a 9.25 minute cycle were discovered in the DA white dwarf V471 Tauri. A residual x-ray flux from the K dwarf companion can be seen during the white dwarf eclipse at orbital phase 0.0. Pronounced dips in the soft x-ray light curve occur at orbital phases 0.15, 0.18, and 0.85. The dips may be correlated with the triangular Lagrangian points of the binary orbit. Smaller dips at phases near the eclipse may be associated with cool loops in the K star corona. Data for the white dwarf H1504+65 was also analyzed. This object is particularly unusual in that its photoshere is devoid of hydrogen and helium. Finally, existing data on the white dwarf Sirius B were analyzed to see what constraints from other data can be placed on the properties of this star. Interrelationships between radius, rotational velocity, and effective temperature were derived.

Shipman, H. L.↗