Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accountability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

A holistic framework integrating plant-microbe-mineral regulation of soil bioavailable nitrogen

Abstract Soil organic nitrogen (N) is a critical resource for plants and microbes, but the processes that govern its cycle are not well-described. To promote a holistic understanding of soil N dynamics, we need an integrated model that links soil organic matter (SOM) cycling to bioavailable N in both unmanaged and managed landscapes, including agroecosystems. We present a framework that unifies recent conceptual advances in our understanding of three critical steps in bioavailable N cycling: organic N (ON) depolymerization and solubilization; bioavailable N sorption and desorption on mineral surfaces; and microbial ON turnover including assimilation, mineralization, and the recycling of microbial products. Consideration of the balance between these processes provides insight into the sources, sinks, and flux rates of bioavailable N. By accounting for interactions among the biological, physical, and chemical controls over ON and its availability to plants and microbes, our conceptual model unifies complex mechanisms of ON transformation in a concrete conceptual framework that is amenable to experimental testing and translates into ideas for new management practices. This framework will allow researchers and practitioners to use common measurements of particulate organic matter (POM) and mineral-associated organic matter (MAOM) to design strategic organic N-cycle interventions that optimize ecosystem productivity and minimize environmental N loss.

Environmental Sciences & Ecology↗

Machine Learning for Improving Surface-Layer-Flux Estimates

Abstract Flows in the atmospheric boundary layer are turbulent, characterized by a large Reynolds number, the existence of a roughness sublayer and the absence of a well-defined viscous layer. Exchanges with the surface are therefore dominated by turbulent fluxes. In numerical models for atmospheric flows, turbulent fluxes must be specified at the surface; however, surface fluxes are not known a priori and therefore must be parametrized. Atmospheric flow models, including global circulation, limited area models, and large-eddy simulation, employ Monin–Obukhov similarity theory (MOST) to parametrize surface fluxes. The MOST approach is a semi-empirical formulation that accounts for atmospheric stability effects through universal stability functions. The stability functions are determined based on limited observations using simple regression as a function of the non-dimensional stability parameter representing a ratio of distance from the surface and the Obukhov length scale (Obukhov in Trudy Inst Theor Geofiz AN SSSR 1:95–115, 1946), $$z/L$$ z / L . However, simple regression cannot capture the relationship between governing parameters and surface-layer structure under the wide range of conditions to which MOST is commonly applied. We therefore develop, train, and test two machine-learning models, an artificial neural network (ANN) and random forest (RF), to estimate surface fluxes of momentum, sensible heat, and moisture based on surface and near-surface observations. To train and test these machine-learning algorithms, we use several years of observations from the Cabauw mast in the Netherlands and from the National Oceanic and Atmospheric Administration’s Field Research Division tower in Idaho. The RF and ANN models outperform MOST. Even when we train the RF and ANN on one set of data and apply them to the second set, they provide more accurate estimates of all of the fluxes compared to MOST. Estimates of sensible heat and moisture fluxes are significantly improved, and model interpretability techniques highlight the logical physical relationships we expect in surface-layer processes.

Meteorology & Atmospheric Sciences↗

Design of a Robust Digital Control System for the Rectification Column Used in the Production of Divinyl

A complex optimization criterion that takes into account the integral quadratic error and the stability margin of a robust digital control system for the rectification column used for the butylene-divinyl fraction is proposed. The influence of the weight coefficient, taking into account the ratio of the performance and stability indicators, on the dynamic characteristics of the system is investigated. High system performance and system stability indices over a sufficiently broad range of variation of the parameters of the rectification column are achieved through the use of the proposed optimization criterion and a stability estimation algorithm in the synthesis of a robust digital control system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Regional Nature of Global Challenges. A Need and Strategy for Integrated Regional Modeling

In this paper, we explore the regional nature of global environmental challenges. We take a broad approach by examining the scientific foundation that is needed to support policy and decision making and identifying some of the most important barriers to progress that are truly scale-dependent. In so doing, we hope to show that understanding global environmental changes requires understanding a number of intrinsically regional phenomena, and that successful decision making likewise requires an integrated approach that accounts for a variety of regional Earth system processes—which we define to include both human activities and environmental systems that operate or interact primarily at sub-continental scales. Understanding regional processes and phenomena, including regional decision-making processes and information needs, should thus be an integral part of the global change research agenda. To address some of the key issues and challenges, we propose an integrated regional modeling approach that accounts for the dynamic interactions among physical, ecological, biogeochemical, and human processes and provides relevant information to regional decision makers and stakeholders.

54 ENVIRONMENTAL SCIENCES↗

The effect of climate change, population distribution, and climate mitigation on building energy use in the U.S. and China

A changing climate will affect the energy system in a number of ways, one of which is through changes in demands for heating and cooling in buildings. Understanding the potential effect of climate on heating and cooling demands must take into account not only the manner in which the building sector might evolve over time - including, for example, movements from rural to urban environments in developing countries - but also important uncertainty about the nature of climate change itself and the growth and movements of populations over time. In this study, we explored the uncertainty in climate change impacts on heating and cooling by constructing estimates of heating and cooling degree days for both a reference (no-policy) scenario and a climate mitigation scenario built from 0.5 degree latitude by 0.5 degree longitude resolution output from three different Global Climate Models (GCMs) and three gridded scenarios of population distribution. The implications that changing climate and population distribution might have for building energy consumption in the U.S. and China were then explored by using the heating and cooling degree days results as inputs to a detailed, building energy model, nested in the long-term global integrated assessment framework, Global Change Assessment Model (GCAM). Across the climate models and population distribution scenarios, the results indicate that unabated climate change would cause total final energy consumption to decrease modestly in both U.S. and China buildings by the end of the century, as decreased heating consumption is more than balanced by increased cooling using primarily electricity. However, the results also indicate that when indirect emissions from the power sector are also taken into account, climate change may have negligible effect on building sector CO2 emissions in the two countries. The variation in results due to variation of population distribution is noticeably smaller than variation due to the use of different climate models.

Zhou, Yuyu↗

Balancing global water availability and use at basin scale in an integrated assessment model

Water is essential for the world’s food supply, for energy production, including bioenergy and hydroelectric power, and for power system cooling. Water is already scarce in many regions of the world and could present a critical constraint as society attempts simultaneously to mitigate climate forcing and adapt to climate change, and to provide for a larger and more prosperous human population. Numerous studies have pointed to growing pressures on the world’s scarce fresh water resources from population and economic growth, and climate change. This study goes further. We use the Global Change Assessment Model to analyze interactions between population, economic growth, energy, land and water resources simultaneously in a dynamically evolving system where competing claims on water resources from all claimants—energy, land, and economy—are reconciled with water resource availability—from renewable water, non-renewable groundwater sources and desalinated water—across 14 geopolitical regions, 151 agriculture-ecological zones, and 235 major river basins. We find that previous estimates of global water withdrawal projections are overestimated. Model simulations show that it is more economical in some basins to alter agricultural and energy activities rather than utilize non-renewable groundwater or desalinated water. This study highlights the importance of accounting for water as a binding factor in agriculture, energy and land use decisions in IAMs and implications for global responses to water scarcity, particularly in the trade of agricultural commodities and land-use decisions.

basin↗

Challenges in simulating economic effects of climate change on global agricultural markets

Abstract Many approaches have been used to investigate climate change impacts on agriculture. However, several caveats remain in this field: (i) analyses focus only on a few major crops, (ii) large differences in yield impacts are observed between projections from site-based crops models and Global Gridded Crop Models (GGCMs), (iii) climate change impacts on livestock are rarely quantified, and (iv) several causal relations among biophysical, environmental, and socioeconomic aspects are usually not taken into account. We investigate how assumptions about these four aspects affect agricultural markets, food supply, consumer well-being, and land use at global level by deploying a large-scale socioeconomic model of the global economy with detailed representation of the agricultural sector. We find global welfare impacts several times larger when climate impacts all crops and all livestock compared to a scenario with impacts limited to major crops. At the regional level, food budget can decrease by 10 to 25% in developing countries, challenging food security. The role of land area expansion as a major source of adaptation is highlighted. Climate impacts on crop yields from site-based process crop models generate more challenging socioeconomic outcomes than those from GGCMs. We conclude that the agricultural research community should expand efforts to estimate climate impacts on many more crops and livestock. Also, careful comparison of the GGCMs and traditional site-based process crop models is needed to understand their major implications for agricultural and food markets.

Gurgel, Angelo C. (ORCID:0000000183319508)↗

The contribution of bioenergy to the decarbonization of transport: a multi-model assessment

The expected growth in the demand for passenger and freight services exacerbates the challenges of reducing transport GHG emissions, especially as commercial low-carbon alternatives to petroleum fuels are limited for shipping, air and long-distance road travel. Biofuels can offer a pathway to significantly reduce emissions from these sectors, as they can easily substitute for conventional liquid fuels in internal combustion engines. In this paper, we assess the potential of bioenergy to reduce transport GHG emissions through an analysis leveraging various integrated assessment models and scenarios, as part of the 33rd Energy Modeling Forum study (EMF-33). Furthermore, we find that bioenergy can contribute a significant, albeit not dominant, proportion of energy supply to the future transport sector: in scenarios aiming to keep the temperature increase below 2 °C by the end of the twenty-first century, models project that in 2100 bioenergy can provide on average 42 EJ/yr (ranging from 5 to 85 EJ/yr) for transport (compared to 3.7 EJ in 2018), mainly through lignocellulosic fuels. This makes up 9–62% of final transport energy use. Only a small amount of bioenergy is projected to be used in transport through electricity and hydrogen pathways, with a larger role for biofuels in road passenger transport than in freight. The association of carbon capture and storage (CCS) with bioenergy technologies (BECCS) is a key determinant in the role of biofuels in transport, because of the competition for biomass feedstock to provide other final energy carriers along with carbon removal. Among models that consider CCS in the biofuel conversion process the average market share of biofuels is 21% in 2100 (ranging from 2 to 44%), compared to 10% (0–30%) for models that do not. Cumulative direct emissions from the transport sector account for half of the emission budget (from 306 to 776 out of 1,000 GtCO 2 ). However, the carbon intensity of transport decreases as much as other energy sectors in 2100 when accounting for process emissions, including carbon removal from BECCS. Lignocellulosic fuels become more attractive for transport decarbonization if BECCS is not feasible for any energy sectors. Since global transport service demand increases and biomass supply is limited, its allocation to and within the transport sector is uncertain and sensitive to assumptions about political as well as technological and socioeconomic factors.

54 ENVIRONMENTAL SCIENCES↗

A model for discrete fracture-clay rock interaction incorporating electrostatic effects on transport

Abstract A model based on the code CrunchClay is presented for a fracture-clay matrix system that takes electrostatic effects on transport into account. The electrostatic effects on transport include those associated with the development of a diffusion potential as captured by the Nernst-Planck equation, and the formation of a diffuse layer bordering negatively charged clay particles within which partial anion exclusion occurs. The model is based on a dual continuum formulation that accounts for diffuse layer and bulk water pore space, providing a more flexible framework than is found in the classical mean electrostatic potential models. The diffuse layer model is obtained by volume averaging ion concentrations in the Poisson-Boltzmann equation, but also includes the treatment of longitudinal transport within this continuum. The calculation of transport within the bulk and diffuse layer porosity is based on a new formulation for the Nernst-Planck equation that considers averaging of diffusion coefficients and accumulation factors at grid cell interfaces. Equations for function residuals and the associated Jacobian matrix are presented such that the system of nonlinear differential-algebraic equations can be solved with Newton’s method. As an example, we consider a 2D system with a single discrete fracture within which flow and advective transport occurs that is coupled to diffusion in the clay-rich matrix. The simulation results demonstrate the lack of retardation for anions (e.g., 36 Cl − ) of the contaminant plume within the fracture flow system because they are largely excluded from the charged clay rock, while the migration of cations (e.g., 90 Sr ++ ) is more strongly attenuated. The diffusive loss of divalent cations in particular from the fracture is accentuated by their accumulation in the diffuse layer within the clay-rich matrix.

58 GEOSCIENCES↗

Determining the Optimum Number of Increments in Composite Sampling

Composite sampling can be more cost effective than simple random sampling. This paper considers how to determine the optimum number of increments to use in composite sampling. Composite sampling can be more cost effective than simple random sampling. This paper considers how to determine the optimum number of increments to use in composite sampling. Composite sampling terminology and theory are outlined and a method is developed which accounts for different sources of variation in compositing and data analysis. This method is used to define and understand the process of determining the optimum number of increments that should be used in forming a composite. The blending variance is shown to have a smaller range of possible values than previously reported when estimating the number of increments in a composite sample. Accounting for differing levels of the blending variance significantly affects the estimated number of increments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Discrete element model for powder grain interactions under high compressive stress

A reduced order, nonlocal model is proposed for the contact force between initially spherical particles under compression. The model in effect provides the normal component of the interaction force between elements in the discrete element method (DEM). It is applicable to high relative density and large stress in powder compaction. It takes into account the mutual interaction between multiple points of contact, in contrast to the usual assumption in DEM of pair interactions. The mathematical form of the model is derived from a variational formulation that leads to the momentum balance for the forces on each grain. The model is calibrated mainly using detailed three dimensional peridynamic simulations of single grains under compressive loading by rigid plates that move radially with prescribed velocity. This calibration takes into account the large deformation and fracture of the grains. The interaction model also includes terms for the unloading behavior and adhesion. Finally, as validation, the model is applied to test data on the compaction of microcrystalline cellulose bulk powder.

36 MATERIALS SCIENCE↗

Determination of Earths transient and equilibrium climate sensitivities from observations over the twentieth century: Strong dependence on assumed forcing

Relations among observed changes in global mean surface temperature, ocean heat content, ocean heating rate, and calculated radiative forcing, all as a function of time over the twentieth century, that are based on a two-compartment energy balance model, are used to determine key properties of Earth's climate system. The increase in heat content of the world ocean, obtained as the average of several recent compilations, is found to be linearly related to the increase in global temperature over the period 1965-2009; the slope, augmented to account for additional heat sinks, which is an effective heat capacity of the climate system, is 21.8 {+-} 2.1 W year m{sup -2} K{sup -1} (one sigma), equivalent to the heat capacity of 170 m of seawater (for the entire planet) or 240 m for the world ocean. The rate of planetary heat uptake, determined from the time derivative of ocean heat content, is found to be proportional to the increase in global temperature relative to the beginning of the twentieth century with proportionality coefficient 1.05 {+-} 0.06 W m{sup -2} K{sup -1}. Transient and equilibrium climate sensitivities were evaluated for six published data sets of forcing mainly by incremental greenhouse gases and aerosols over the twentieth century as calculated by radiation transfer models; these forcings ranged from 1.1 to 2.1 W m{sup -2}, spanning much of the range encompassed by the 2007 assessment of the Intergovernmental Panel on Climate Change (IPCC). For five of the six forcing data sets, a rather robust linear proportionality obtains between the observed increase in global temperature and the forcing, allowing transient sensitivity to be determined as the slope. Equilibrium sensitivities determined by two methods that account for the rate of planetary heat uptake range from 0.31 {+-} 0.02 to 1.32 {+-} 0.31 K (W m{sup -2}){sup -1} (CO{sub 2} doubling temperature 1.16 {+-} 0.09-4.9 {+-} 1.2 K), more than spanning the IPCC estimated 'likely' uncertainty range, and strongly anticorrelated with the forcing used to determine the sensitivities. Transient sensitivities, relevant to climate change on the multidecadal time scale, are considerably lower, 0.23 {+-} 0.01 to 0.51 {+-} 0.04 K (W m{sup -2}){sup -1}. The time constant characterizing the response of the upper ocean compartment of the climate system to perturbations is estimated as about 5 years, in broad agreement with other recent estimates, and much shorter than the time constant for thermal equilibration of the deep ocean, about 500 years.

54 ENVIRONMENTAL SCIENCES↗

Strength of Reinforced Concrete Structures of Hydroelectric Power Plants and Nuclear Power Plants

The reinforced concrete structures of hydroelectric power plants and nuclear power plants differ from civil structures by their massive nature, including high cross-sections, low reinforcement percentage, and the presence of block seams. A decrease in the safety of these structures results when these features are not taken into account. Methods of calculation that take these features into account are proposed.

42 ENGINEERING↗

Bench-Scale Electrochemical System for Generation of CO and Syn-Gas

A bench-scale system for the electrochemical reduction of CO2 has been developed which produces CO and H2 (syn-gas) mixtures. The system is equipped with a gas-diffusion electrode which partially alleviates some of the mass-transport issues associated with CO2 delivery to the cathode. The positive effect of temperature was discovered where at 70°C a reduction in cell voltage of 1.57 V (compared to ambient) was observed at 70 mA cm-2. Controlling the flow of CO2 made it possible to maintain set H2:CO ratios with CO accounting for 25-90% of the product and H2 accounting for 10-75%. The cell, after an initial stabilization period of 40 min, displays reproducible, stable behavior. The current cell design brings the current densities for CO2 reduction closer to what is currently achieved in industrial alkaline electrolysis cells. This report discusses the electrolyte, electrode materials and variables which have been found to be significant in the production of CO and syn-gas mixtures.

08 HYDROGEN↗

Sampling dynamics for pressurized electrochemical cells

A model describing the gas distribution within a constant pressure electrolysis system and how the distribution impacts electrochemical efficiencies is presented. The primary system of interest is the generation of syngas (CO and H2) associated with the co-electrolysis of H2O and CO2. The model developed for this system takes into account the primary process variables of operation including total system pressure, applied current, the in-flow of reactant gases. From these, and the chemical equilibria within the system, the impact on electrochemically generated gases is presented. Comparing the predicted and measured faradaic efficiency of electrode processes with the expected efficiency from experimental data indicates an offset between the two exists. Methods to minimize and account for the discrepancy are presented with the goal of being able to discern, in a real time manner, degradation of electrode performance. Comparison of the model to experimental data shows a strong correlation between the two with slight variation in experimental data which is attributed to reversible system dynamics such as wetting of the gas diffusion electrode used as the cell cathode.

10 SYNTHETIC FUELS↗

Advanced mass balance characterization and fractionation of algal biomass composition

Abstract Opportunities associated with biomass production and bioproduct isolation from algae-derived feedstocks are plentiful and promising; however, there are challenges associated with realizing these applications. One of the most important, and often overlooked, challenges is the lack of availability of a strong foundation of compositional analysis methods validated on microalgal biomass. Currently, compositional analysis in algae is dominated by the use of interference-prone methods, a lack of full mass balance accounting, and the use of top-down approaches that bin all unaccounted-for mass into a single category, such as carbohydrates. We present here an approach based on a bottom-up algal biomass characterization aimed at moving towards, and highlighting the importance of, full and accurate mass closure to achieve the maximum economic potential from a sustainable and renewable feedstock. Algal biomass representing three genera, Nannochloropsis , Scenedesmus , and Monoraphidium , was subjected to a cell rupture and fractionation process, followed by detailed characterization of each fraction to determine the partitioning of measured and unknown components. The goal of this work is to identify where the missing components partition, and develop a strategy to close the mass balance or identify the unknowns, while utilizing a rigorous characterization approach for characterizing algal biomass. Although only 75–80% of the biomass was accounted for, the fractionation approach utilized here provides key insight into possible chemical components for future investigations.

59 BASIC BIOLOGICAL SCIENCES↗

The Simulation and Design of an On-Chip Superconducting Millimetre Filter-Bank Spectrometer

Abstract Superconducting on-chip filter banks provide a scalable, space saving solution to create imaging spectrometers at millimetre and submillimetre wavelengths. We present an easy to realise, lithographed superconducting filter design with a high tolerance to fabrication error. Using a capacitively coupled $$\lambda /2$$ λ / 2 microstrip resonator to define a narrow ( $$\lambda /\Delta \lambda = 300$$ λ / Δ λ = 300 ) spectral pass band, the filtered output of a given spectrometer channel directly connects to a lumped-element kinetic inductance detector. We show the tolerance analysis of our design, demonstrating $$<11\%$$ < 11 % change in filter quality factor to any one realistic fabrication error and a full filter-bank efficiency forecast to be 50% after accounting for fabrication errors and dielectric loss tangent.

Robson, G. (ORCID:0000000315279326)↗

Critical Behavior of the Specific Heat of Pr{sub 0.6}Sr{sub 0.4}Mn{sub 1−x}Fe{sub x}O{sub 3} Manganites

The specific heat of Pr{sub 0.6}Sr{sub 0.4}Mn{sub 1−x}Fe{sub x}O{sub 3} (x = 0 and 0.1) manganites was measured in the temperature range 80–350 K. A nature of the ferromagnetic phase transition is studied via the analysis of a specific heat critical behavior near the Curie temperature with account of correction to the scaling. The critical indices calculated with the account of correction to the scaling α = −0.0981 and −0.1208 for x = 0 and 0.10, correspondingly, are close to those of the 3D Heisenberg model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗