Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMMUNICATION NETWORKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Draft LunaNet Interoperability Specification

Under the guidance of NASA’s Space Communication and Navigation (SCaN) program, this document, along with its companion documents, LunaNet Services Requirements Document (TBD) and the LunaNet Concept of Operations and Architecture (TBD), provides the basis for a comprehensive set of requirements for operation of a lunar communications and navigation network capable of interoperating with other networks compliant with the Lunar Network (LunaNet) for services to the human exploration, lunar science, and space technology missions. LunaNet will start with a simple architecture of a few nodes to meet the needs of the early missions and evolve to meet the growing needs of a sustained lunar presence. All relay network services are not expected to be met by a single spacecraft platform, or node. The expectation is that the needs of NASA, its partners and other users will be met through a combination of interoperable systems provided by NASA, international partners, and commercial providers. Interoperability across this network-of-networks can be achieved through negotiation of mutually-agreed-upon standards that will be reflected in this document and in the specifications defined by other participants in the combined, cooperative lunar network.

LunaNet↗

An Evaluation of the CAN bus for Use on the Europa Lander Motor Controller

This paper will present the application of the Controller Area Network (CAN) for communication between the Motor Control Processor and the Europa Lander Motor Control Cards. The Europa Lander mission is concerned about lowering the mass, volume, and power so that it can maximize its science return. The motor controller uses multiple Motor Control Cards to control the 24 motors that will be operating in the extremes of the Europa environment. The CAN bus was considered because of its multi-drop nature, low power interface, and simple communication protocol. Beyond communication with the motor controller cards we also use the CAN bus interface to gather telemetry from the Power Conversion Card. Our system requires the collection of telemetry at a rate of 64Hz from the Power Conversion Card and all active motor controllers along with the sending of control packets and the receipt of control parameters at 512 Hz. In the paper we will address the ability of the CAN bus to meet these requirements along with our Arduino based test system used to learn about the CAN bus standard and verify our analysis.

Lias, Malcolm↗

Draft LunaNet Interoperability Specification

This document, along with its companion documents, provides the basis for a comprehensive set of requirements for operation of a lunar communications and navigation network capable of interoperating with other networks compliant with the Lunar Network (LunaNet). LunaNet will include Earth ground stations and orbiting spacecraft and will provide services to human exploration, lunar science, and space technology missions. LunaNet will start with a simple architecture of a few nodes to meet the needs of the early missions and evolve to meet the growing needs of a sustained lunar presence. All relay network services are not expected to be met by a single spacecraft, or node. The expectation is that the needs of users will be met through a combination of interoperable systems provided by NASA, international partners, and commercial providers. Interoperability across this network-of-networks can be achieved through negotiation of mutually-agreed-upon standards that will be reflected in this document and in the specifications defined by other participants in the cooperative lunar network. This document was written and reviewed by NASA and the European Space Agency (ESA).

LunaNet↗

GeneLab for High Schools – Bioinformatic Training For Students And Educators

Modern biological sciences are increasingly based on high-throughput molecular techniques, including genomics, transcriptomics, and proteomics. NASA’s GeneLab program has collected extensive data from ‘omics’ studies, curated them into an accessible platform and provided data analysis/visualization tools to facilitate the generation of new hypotheses and research directions. GeneLab for High Schools (GL4HS), launched in 2017, has endeavored to utilize this database and provide tools for students to understand and analyze omics datasets whilst also learning about spaceflight research. The GL4HS program ran in person at Ames from 2017-2019 and has run virtually since 2020. Each year fifteen high school students are trained to analyze and interpret GeneLab transcriptomic data. Additionally, in the last several years we have expanded our “teacher training program” to include 10 teachers total in an effort to enable this program to be utilized in classrooms across the USA. Teachers also join the NASA GeneLab Education Working Group (EWG) enabling support as they implement custom GL4HS modules into their classrooms. The GL4HS program consists of three main components – (1) core learning modules, (2) networking and teamwork, and (3) an independent learning project. Students are also taught critical networking and science communication skills facilitating their ability to ‘sell their science’ in innovative and creative ways. This program has enabled students to learn about biology in space and to have a glimpse into the world of research for the first time. Many of the students in this program shared that the course was transformative to their perception about biological sciences and how it linked to other areas of STEM. The ultimate and long-term goal of GL4HS is to expand the program to multiple locations thereby facilitating the reach of NASA Space Biology beyond NASA-centric regions.

GeneLab↗

Draft LunaNet Interoperability Specification

This document, along with its companion documents, provides the basis for a comprehensive set of requirements for operation of a lunar communications and navigation network capable of interoperating with other networks compliant with the Lunar Network (LunaNet). LunaNet will include Earth ground stations and orbiting spacecraft and will provide services to human exploration, lunar science, and space technology missions. LunaNet will start with a simple architecture of a few nodes to meet the needs of the early missions and evolve to meet the growing needs of a sustained lunar presence. All relay network services are not expected to be met by a single spacecraft, or node. The expectation is that the needs of users will be met through a combination of interoperable systems provided by NASA, international partners, and commercial providers. Interoperability across this network-of-networks can be achieved through negotiation of mutually-agreed-upon standards that will be reflected in this document and in the specifications defined by other participants in the cooperative lunar network. This document was written and reviewed by NASA and the European Space Agency (ESA).

LunaNet↗

Machine Learning for the Validation of Expert-Elicited Causal Risk Diagrams

Exposure to spaceflight poses risk to human health in complex ways. To help manage this risk, the Human Systems Risk Board (HSRB) at the National Aeronautics and Space Administration (NASA) maintains a set of causal diagrams that attempt to explain how spaceflight hazards generate health risks and lead to adverse outcomes both in-mission, immediately post-mission, and over the long term. These causal risk diagrams are formulated as directed acyclic graphs (DAGs) and can function as knowledge graphs of connected risks and outcomes. These DAGs have proven useful for communication, and, through network analysis, have allowed for the identification of structurally important factors in the risk network. However, the utility these DAGs provide is directly proportional to their verisimilitude, making assessment of this trait using empirical data – whether from actual human spaceflight or various spaceflight analogue exposures and model organisms – a high priority. In this research we explore the use of machine learning algorithms to learn DAG structure from empirical data as a means of evaluating human-elicited DAG structures. To do so, we test several different graph structure-learning algorithms on data concerning changes in the bones of rats and mice after exposure to either spaceflight or a spaceflight analogue. We explore potential methods for indexing the similarity between each algorithm’s output DAG with all the others and with that of the expert-elicited DAG. We discuss next steps in this ongoing line of research and open science initiatives underway to complete them.

directed acyclic graphs↗

Expanding the Deep Space Network to Support the Heliophysics System Observatory

Difficulties associated with receiving telemetry from satellites severely limit the volume of scientific data that can be downlinked to the ground. Current missions employ techniques such as compressing and pruning datasets to reduce the data volume they transmit. While existing mission designs are already restricted by limited telemetry budgets, future Heliophysics System Observatory missions will produce ever larger data volumes with higher resolution and cadence observations from constellations of satellites spread throughout the heliosphere1. In addition, heliophysics missions often produce data for the operational Space Weather community that requires a low latency between observation and downlink. In light of current limitations, the infrastructure to receive NASA satellite telemetry must be expanded and modernized to support the science needs of future data-rich heliophysics missions.

deep space network (DSN)↗

NASA’s Lunar Communications and Navigation Architecture: Human Lunar Return

NASA’s Artemis missions will return humanity to the Moon, establishing a long-term presence there and opening more of the lunar surface to exploration than ever before. This rapid growth of lunar activity requires robust and resilient communications, navigation, and networking capabilities for crew safety, command and control of spacecraft, return of science data, and precise maneuvering of assets in space and on the lunar surface.

Michael J Zemba↗

A Survey of Autonomous Navigation Techniques Applicable to Lunar Surface Exploration

As humanity returns to the Moon, and more and more attention is being paid to lunar surface operations, there is a greater need than ever for methods of surface navigation. These could be methods of computer-assisted orienteering for astronauts exploring on foot during an Extra-Vehicular Activity (EVA), or methods of solving the Lost-on-the-Moon problem to initialize a crewed or autonomous rover’s state estimate. It may also be necessary to process navigation data associated with surface samples or other surface operations a posteriori to better understand where that analysis occurred. Autonomous rover operation will also require Hazard Detection and Avoidance (HDA) and terrain-aware pathfinding. While navigation on the surface of the Moon will likely rely on Earth-based assets such as the Deep Space Network (DSN) or communication with other spacecraft (e.g., LunaNet, LCRNS, pre-deployed moon beacons, a nearby lander) it may be necessary to navigate in a loss-of-communication scenario. This paper analyzes the methods of surface navigation used on other celestial bodies, such as those used during the Apollo missions and autonomous exploration of Mars, as well as novel methods which have been studied but not yet implemented which may prove useful. It is shown that the navigator has myriad options when processing data from an Inertial Measurement Unit (IMU), a star tracker, (rover) wheel encoders, optical cameras, and LIght Detection and Ranging (LIDAR) sensors. The intention of this paper is to provide a broad overview of what has been done and what could be done, to aid those designing vehicles and/or missions to the lunar surface.

Paul D Mckee↗

A Survey of Autonomous Navigation Techniques Applicable to Lunar Surface Exploration

As humanity returns to the Moon, and more and more attention is being paid to lunar surface operations, there is a greater need than ever for methods of surface navigation. These could be methods of computer-assisted orienteering for astronauts exploring on foot during an Extra-Vehicular Activity (EVA), or methods of solving the Lost-on-the-Moon problem to initialize a crewed or autonomous rover’s state estimate. It may also be necessary to process navigation data associated with surface samples or other surface operations a posteriori to better understand where that analysis occurred. Autonomous rover operation will also require Hazard Detection and Avoidance (HDA) and terrain-aware pathfinding. While navigation on the surface of the Moon will likely rely on Earth-based assets such as the Deep Space Network (DSN) or communication with other spacecraft (e.g., LunaNet, LCRNS, pre-deployed moon beacons, a nearby lander) it may be necessary to navigate in a loss-of-communication scenario. This paper analyzes the methods of surface navigation used on other celestial bodies, such as those used during the Apollo missions and autonomous exploration of Mars, as well as novel methods which have been studied but not yet implemented which may prove useful. It is shown that the navigator has myriad options when processing data from an Inertial Measurement Unit (IMU), a star tracker, (rover) wheel encoders, optical cameras, and LIght Detection and Ranging (LIDAR) sensors. The intention of this paper is to provide a broad overview of what has been done and what could be done, to aid those designing vehicles and/or missions to the lunar surface.

Paul McKee↗

Efficient Placement of Directional Antennas

Directional antenna is an technology for the proliferation of wireless networks. In centralized wireless network, wireless devices communicate through base stations. Directed antennas are placed on base stations and form a backbone of communication. The communication between base stations and wireless devices can be interfered due to a large number of wireless device. Methodically positioning and orienting directed antennas can help to reduce the interference while saving energy. An integer linear programming is developed for siting and directing antennas on multiple base stations, and this formulation can be extended to model non-overlapping channels. Through the integer programming formulation, optimal antenna positions can be used to analyze the performance of directed antennas with different parameters like the number base stations and the number of non-overlapping channels.

99 GENERAL AND MISCELLANEOUS↗

Localization-Based detection under network losses

We consider a networked system of sensors that measure the intensity of a source amidst background inside a two-dimensional monitoring area. The source intensity decays away from it, and the corresponding sensor measurements are random with a parameter determined by the intensity at sensor location. The detection problem is to infer the presence of a source based on measurements. Under a statistical independence condition, we show that a detection method based on maximum likelihood fuser performs below the individual sensors in presence of network losses. It has been previously shown that the localization of a source using measurements from multiple sensors leads to an improved detection, thereby establishing the effectiveness of a network over single or co-located sensors. We show that the communication losses degrade such network detection performance, particularly to levels below that of a single sensor under heavy losses. Under fairly general conditions on the source intensity decay functions and underlying measurement distributions, we quantify the loss of performance of the localization-based detection as a function of loss rate and packing number of state space. We present simulation and experimental results that illustrate the performance degradations due to network losses in detecting radiation sources.

cyber-physical networks↗

R&D 100, 2016: T-Quake – Quantum-Mechanical Transmitter/Receiver Microchip

Applying advanced microfabrication techniques and innovative microdesign, the Sandia Enabled Communications and Authentication Network (SECANT) team has designed and produced photonic microchips capable of sending, receiving, and processing quantum signals for applications in cyber and physical security.

36 MATERIALS SCIENCE↗

Data Driven Online Learning of Power System Dynamics

With the advancement of sensing and communication in power networks, high-frequency real-time data from a power network can be used as a resource to develop better monitoring capabilities. In this work, a systematic approach based on data-driven operator theoretic methods involving Koopman operator is proposed for the online identification of power system dynamics. In particular, a new algorithm is provided, which unlike any previously existing algorithms, updates the Koopman operator iteratively as new data points are acquired. The proposed algorithm has three advantages: a) allows for real-time monitoring of the power system dynamics b) linear power system dynamics (this linear system is usually in a higher dimensional feature space and is not same as linearization of the underlying nonlinear dynamics) and c) computationally fast and less intensive when compared to the popular Extended Dynamic Mode Decomposition (EDMD) algorithm. The efficiency of the proposed algorithm is illustrated on an IEEE 9 bus system using synthetic data from the nonlinear model and on IEEE 39 bus system using synthetic data from the linearized model.

Sinha, Subhrajit↗

Neutron Scattering Experiment Automation with Python

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory currently holds the Guinness World Record as the world most powerful pulsed spallation neutron source. Neutrons scattered off atomic nuclei in a sample yield important information about the position, motions, and magnetic properties of atoms in materials. A neutron scattering experiment usually involves sample environment control (temperature, pressure, etc.), mechanical alignment (slits, sample and detector position), magnetic field controllers, neutron velocity selection (choppers) and neutron detectors. The SNS Data Acquisition System (DAS) consists of real-time sub-system (detector read-out with custom electronics, chopper interface), data preprocessing (soft real-time) and a cluster of control and ancillary PCs. The real-time system runs FPGA firmware and programs running on PCs (C++, LabView) typically perform one task such as motor control and communicate via TCP/IP networks. PyDas is a set of Python modules that are used to integrate various components of the SNS DAS system. It enables customized automation of neutron scattering experiments in a rapid and flexible manner. It provides wxPython GUIs for routine experiments as well as IPython command line scripting. Matplotlib and numpy are used for data presentation and simple analysis. We will present an overview of SNS Data Acquisition System and PyDas architectures and implementation along with the examples of use. We will also discuss plans for future development as well as the challenges that have to be met while maintaining PyDas for 20+ different scientific instruments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Network functions and facilities

The network is designed for two-way communications with unmanned spacecraft traveling approximately 16,000 km (10,000 miles) from earth to the farthest planets and to the edge of our solar system. The objectives, functions, and organization of the Deep Space Network are summarized. Deep space station, ground communication, and network operations control capabilities are described.

Renzetti, N. A.↗

The deep space network, volume 16

The objectives, functions, and organization of the DSN are summarized, and the instrumentation facility, ground communication facility, and the network control system are described. The requirements for supporting planetary flight projects are discussed along with the research and technology for tracking, navigation, network control, and data processing.

Source record↗

Next Generation Relay Services at Mars via an International Relay Network

Nearly all data acquired by vehicles on the surface of Mars are returned to Earth via Mars orbiters – more than 1.7 terabits so far. Successful communication between the various spacecraft is achieved via the careful implementation of internationally recognized CCSDS telecommunications protocols and the use of planning and coordination services provided by NASA’s Mars Program Office and the Multimission Ground Systems and Services (MGSS) Program at the Jet Propulsion Laboratory in Pasadena, CA. This modern Mars relay network has evolved since its inception in 2004 with the addition and loss of several missions, but it has fundamentally remained unchanged. Ground interfaces between the various spacecrafts’ mission operations centers on Earth remain largely unique for each participant, each mission maintains its own interfaces with deep space communications networks (e.g. DSN, ESTRACK), which are similar but still unique; and relay sessions at Mars require careful ground planning, coordination, and implementation. This paper will discuss the existing architecture and consider how several technologies may be applied to the next generation of relay services at Mars. Ultimately, these are expected to lead to the implementation of a delay and disruption tolerant network at Mars, a precursor to becoming a major element in an emerging Solar System Internet.

Edwards, Charles D. Jr↗