Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

High-resolution X-ray diffraction analysis of Al{sub x}Ga{sub 1−x}N/In{sub x}Ga{sub 1−x}N/GaN on sapphire multilayer structures: Theoretical, simulations, and experimental observations

The work presents a comparative study on the effects of In incorporation in the channel layer of AlGaN/GaN type-II heterostructures grown on c-plane sapphire by Plasma Assisted Molecular Beam Epitaxy. The structural characterizations of these samples were performed by High-Resolution X-Ray Diffraction (HRXRD), X-ray Reflectivity (XRR), Field Emission Scanning Electron Microscopy, and High Resolution Transmission Electron Microscopy. The two-dimensional electron gas in the AlGaN/GaN and AlGaN/InGaN interface was analyzed by electrochemical capacitance voltage and compared with theoretical results based on self-consistent solution of Schördinger–Poisson equations. The carrier profile shows enhanced confinement in InGaN channel (1.4393 × 10{sup 13} cm{sup −2} compared to 1.096 × 10{sup 13} cm{sup −2} in GaN). On the basis of HRXRD measurements, the stress-strain of the layers was examined. The c- and a-lattice parameters of the epilayers as well as in-plane and out-of plane strains were determined from the ω-2θ for symmetric scan and ω-Xθ (X represents the coupling coefficient) for asymmetric scan. Strain, tilt, and correlation lengths were calculated from Williamson–Hall plots, whereas stress was examined from modified plot of the same data assuming Uniform Stress Deformation Model. Moreover, the twist angle was measured from skew symmetric scan of (102), (103), and (105) plane along with (002) symmetric plane. The composition and strain/relaxation state of the epilayers were observed in detail by reciprocal space mapping (RSM). The symmetric (002) triple axis RSM and asymmetric (105 and 114) double axis RSM of grazing incidence and exit geometry were carried out on each sample. The defect density was measured from HRXRD curves of skew symmetric (002) and (102) reflection plane. The Al and In mole fraction and strain states of the layers were calculated by fitting the experimental curves with computer simulations and compared with theoretical findings based on elastic theory. The thicknesses of the layers and roughness of the interfaces were measured from simulation of the nominal structure by fitting with XRR experimental curves. The HRXRD measured thicknesses of the layers were further confirmed by cross sectional electron micrographs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InGaAs tunnel diodes for the calibration of semi-classical and quantum mechanical band-to-band tunneling models

Promising predictions are made for III-V tunnel-field-effect transistor (FET), but there is still uncertainty on the parameters used in the band-to-band tunneling models. Therefore, two simulators are calibrated in this paper; the first one uses a semi-classical tunneling model based on Kane's formalism, and the second one is a quantum mechanical simulator implemented with an envelope function formalism. The calibration is done for In{sub 0.53}Ga{sub 0.47}As using several p+/intrinsic/n+ diodes with different intrinsic region thicknesses. The dopant profile is determined by SIMS and capacitance-voltage measurements. Error bars are used based on statistical and systematic uncertainties in the measurement techniques. The obtained parameters are in close agreement with theoretically predicted values and validate the semi-classical and quantum mechanical models. Finally, the models are applied to predict the input characteristics of In{sub 0.53}Ga{sub 0.47}As n- and p-lineTFET, with the n-lineTFET showing competitive performance compared to MOSFET.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cross-correlation measurement of quantum shot noise using homemade transimpedance amplifiers

We report a cross-correlation measurement system, based on a new approach, which can be used to measure shot noise in a mesoscopic conductor at milliKelvin temperatures. In contrast to other measurement systems in which high-speed low-noise voltage amplifiers are commonly used, our system employs homemade transimpedance amplifiers (TAs). The low input impedance of the TAs significantly reduces the crosstalk caused by unavoidable parasitic capacitance between wires. The TAs are designed to have a flat gain over a frequency band from 2 kHz to 1 MHz. Low-noise performance is attained by installing the TAs at a 4 K stage of a dilution refrigerator. Our system thus fulfills the technical requirements for cross-correlation measurements: low noise floor, high frequency band, and negligible crosstalk between two signal lines. Using our system, shot noise generated at a quantum point contact embedded in a quantum Hall system is measured. The good agreement between the obtained shot-noise data and theoretical predictions demonstrates the accuracy of the measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Modulation of over 10{sup 14} cm{sup −2} electrons in SrTiO{sub 3}/GdTiO{sub 3} heterostructures

We demonstrate charge modulation of over 10{sup 14} cm{sup −2} electrons in a two-dimensional electron gas formed in SrTiO{sub 3}/GdTiO{sub 3} inverted heterostructure field-effect transistors. Increased charge modulation was achieved by reducing the effect of interfacial region capacitances through thick SrTiO{sub 3} cap layers. Transport and device characteristics of the heterostructure field-effect transistors were found to match a long channel field effect transistor model. SrTiO{sub 3} impurity doped metal–semiconductor field effect transistors were also demonstrated with excellent pinch-off and current density exceeding prior reports. The work reported here provides a path towards oxide-based electronics with extreme charge modulation exceeding 10{sup 14} cm{sup −2}.

36 MATERIALS SCIENCE↗

Scaled ZrO{sub 2} dielectrics for In{sub 0.53}Ga{sub 0.47}As gate stacks with low interface trap densities

ZrO{sub 2} dielectrics were grown on n-In{sub 0.53}Ga{sub 0.47}As channels by atomic layer deposition, after employing an in-situ cyclic nitrogen plasma/trimethylaluminum surface cleaning procedure. By scaling the ZrO{sub 2} thickness, accumulation capacitance densities of 3.5 μF/cm{sup 2} at 1 MHz are achieved. The midgap interface trap density is estimated to be in the 10{sup 12} cm{sup −2} eV{sup −1} range. Using x-ray photoelectron spectroscopy, it was shown that the interface contained the oxides of In, Ga, and Al, but no As-oxides or As-As bonds within the detection limit. The results allow for insights into the effective passivation of these interfaces.

36 MATERIALS SCIENCE↗

Band alignment and electrical properties of Al{sub 2}O{sub 3}/β-Ga{sub 2}O{sub 3} heterojunctions

The band alignment of Al{sub 2}O{sub 3}/n-Ga{sub 2}O{sub 3} was investigated by x-ray photoelectron spectroscopy (XPS). With a band gap of 6.8 ± 0.2 eV measured for Al{sub 2}O{sub 3}, the conduction and valence band offsets at the interface were estimated to be 1.5 ± 0.2 eV and 0.7 ± 0.2 eV, respectively. The conduction band offset was also obtained from tunneling current in Al{sub 2}O{sub 3}/n-Ga{sub 2}O{sub 3} (2{sup ¯}01) metal-oxide-semiconductor (MOS) diodes using the Fowler-Nordheim model. The electrically extracted value was in good agreement with the XPS data. Furthermore, the MOS diodes exhibited small capacitance-voltage hysteresis loops, indicating the successful engineering of a high-quality Al{sub 2}O{sub 3}/Ga{sub 2}O{sub 3} interface.

36 MATERIALS SCIENCE↗

Greatly improved interfacial passivation of in-situ high κ dielectric deposition on freshly grown molecule beam epitaxy Ge epitaxial layer on Ge(100)

A high-quality high-κ/Ge interface has been achieved by combining molecule beam epitaxy grown Ge epitaxial layer and in-situ deposited high κ dielectric. The employment of Ge epitaxial layer has sucessfully buried and/or removed the residue of unfavorable carbon and native oxides on the chemically cleaned and ultra-high vacuum annealed Ge(100) wafer surface, as studied using angle-resolved x-ray photoelectron spectroscopy. Moreover, the scanning tunneling microscopy analyses showed the significant improvements in Ge surface roughness from 3.5 Å to 1 Å with the epi-layer growth. Thus, chemically cleaner, atomically more ordered, and morphologically smoother Ge surfaces were obtained for the subsquent deposition of high κ dielectrics, comparing with those substrates without Ge epi-layer. The capacitance-voltage (C-V) characteristics and low extracted interfacial trap density (D{sub it}) reveal the improved high-κ/Ge interface using the Ge epi-layer approach.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical solution deposition of ferroelectric yttrium-doped hafnium oxide films on platinum electrodes

Ferroelectric hafnium oxide films were fabricated by chemical solution deposition with a remnant polarization of >13 μC/cm{sup 2}. The samples were prepared with 5.2 mol. % yttrium-doping and the thickness varied from 18 nm to 70 nm. The hafnium oxide layer was integrated into a metal-insulator-metal capacitor using platinum electrodes. Due to the processing procedure, no thickness dependence of the ferroelectric properties was observed. To confirm the ferroelectric nature of the deposited samples, polarization, capacitance, and piezoelectric displacement measurements were performed. However, no evidence of the orthorhombic phase was found which has been proposed to be the non-centrosymmetric, ferroelectric phase in HfO{sub 2}.

36 MATERIALS SCIENCE↗

Competition between pressure effects and airflow influence for the performance of plasma actuators

The present work addresses the combined influence of pressure variations and different airflow velocities on the discharge intensity of plasma actuators. Power consumption, plasma length, and discharge capacitance were investigated systematically for varying pressure levels (p = 0.1–1 bar) and airflow velocities (U{sub ∞}=0−100 m/s) to characterize and quantify the favorable and adverse effects on the discharge intensity. In accordance with previous reports, an increasing plasma actuator discharge intensity is observed for decreasing pressure levels. At constant pressure levels, an adverse airflow influence on the electric actuator performance is demonstrated. Despite the improved discharge intensity at lower pressure levels, the seemingly improved performance of the plasma actuators is accompanied with a more pronounced drop of the relative performance. These findings demonstrate the dependency of the (kinematic and thermodynamic) environmental conditions on the electric performance of plasma actuators, which in turn affects the control authority of plasma actuators for flow control applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen interaction kinetics of Ge dangling bonds at the Si{sub 0.25}Ge{sub 0.75}/SiO{sub 2} interface

The hydrogen interaction kinetics of the GeP{sub b1} defect, previously identified by electron spin resonance (ESR) as an interfacial Ge dangling bond (DB) defect occurring in densities ∼7 × 10{sup 12} cm{sup −2} at the SiGe/SiO{sub 2} interfaces of condensation grown (100)Si/a-SiO{sub 2}/Ge{sub 0.75}Si{sub 0.25}/a-SiO{sub 2} structures, has been studied as function of temperature. This has been carried out, both in the isothermal and isochronal mode, through defect monitoring by capacitance-voltage measurements in conjunction with ESR probing, where it has previously been demonstrated the defects to operate as negative charge traps. The work entails a full interaction cycle study, comprised of analysis of both defect passivation (pictured as GeP{sub b1}-H formation) in molecular hydrogen (∼1 atm) and reactivation (GeP{sub b1}-H dissociation) in vacuum. It is found that both processes can be suitably described separately by the generalized simple thermal (GST) model, embodying a first order interaction kinetics description based on the basic chemical reactions GeP{sub b1} + H{sub 2} → GeP{sub b1}H + H and GeP{sub b1}H → GeP{sub b1} + H, which are found to be characterized by the average activation energies E{sub f} = 1.44 ± 0.04 eV and E{sub d} = 2.23 ± 0.04 eV, and attendant, assumedly Gaussian, spreads σE{sub f} = 0.20 ± 0.02 eV and σE{sub d} = 0.15 ± 0.02 eV, respectively. The substantial spreads refer to enhanced interfacial disorder. Combination of the separately inferred kinetic parameters for passivation and dissociation results in the unified realistic GST description that incorporates the simultaneous competing action of passivation and dissociation, and which is found to excellently account for the full cycle data. For process times t{sub a} ∼ 35 min, it is found that even for the optimum treatment temperature ∼380 °C, only ∼60% of the GeP{sub b1} system can be electrically silenced, still far remote from device grade level. This ineffectiveness is concluded, for the major part, to be a direct consequence of the excessive spreads in the activation energies, ∼2–3 times larger than for the Si DB P{sub b} defects at the standard thermal (111)Si/SiO{sub 2} interface which may be easily passivated to device grade levels, strengthened by the reduced difference between the average E{sub f} and E{sub d} values. Exploring the guidelines of the GST model indicates that passivation can be improved by decreasing T{sub an} and attendant enlarging of t{sub a}, however, at best still leaving ∼2% defects unpassivated even for unrealistically extended anneal times. The average dissociation energy E{sub d} ∼ 2.23 eV, concluded as representing the GeP{sub b1}-H bond strength, is found to be smaller than the SiP{sub b}-H one, characterized by E{sub d} ∼ 2.83 eV. An energy deficiency is encountered regarding the energy sum rule inherent to the GST-model, the origin of which is substantiated to lie with a more complex nature of the forward passivation process than basically depicted in the GST model. The results are discussed within the context of theoretical considerations on the passivation of interfacial Ge DBs by hydrogen.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Z{sub 1/2}, EH{sub 5}, and Ci1 deep defects on the performance of n-type 4H-SiC epitaxial layers Schottky detectors: Alpha spectroscopy and deep level transient spectroscopy studies

Spectroscopic performance of Schottky barrier alpha particle detectors fabricated on 50 μm thick n-type 4H-SiC epitaxial layers containing Z{sub 1/2}, EH{sub 5}, and Ci1 deep levels were investigated. The device performance was evaluated on the basis of junction current/capacitance characterization and alpha pulse-height spectroscopy. Capacitance mode deep level transient spectroscopy revealed the presence of the above-mentioned deep levels along with two shallow level defects related to titanium impurities (Ti(h) and Ti(c)) and an unidentified deep electron trap located at 2.4 eV below the conduction band minimum, which is being reported for the first time. The concentration of the lifetime killer Z{sub 1/2} defects was found to be 1.7 × 10{sup 13} cm{sup −3}. The charge transport and collection efficiency results obtained from the alpha particle pulse-height spectroscopy were interpreted using a drift-diffusion charge transport model. Based on these investigations, the physics behind the correlation of the detector properties viz., energy resolution and charge collection efficiency, the junction properties like uniformity in barrier-height, leakage current, and effective doping concentration, and the presence of defects has been discussed in details. The studies also revealed that the dominating contribution to the charge collection efficiency was due to the diffusion of charge carriers generated in the neutral region of the detector. The 10 mm{sup 2} large area detectors demonstrated an impressive energy resolution of 1.8% for 5486 keV alpha particles at an optimized operating reverse bias of 130 V.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved time response for large area microchannel plate photomultiplier tubes in fusion diagnostics

Fusion diagnostics that utilise high speed scintillators often need to capture a large area of light with a high degree of time accuracy. Microchannel plate (MCP) photomultiplier tubes (PMTs) are recognised as the leading device for capturing fast optical signals. However, when manufactured in their traditional proximity focused construction, the time response performance is reduced as the active area increases. This is due to two main factors: the capacitance of a large anode and the difficulty of obtaining small pore MCPs with a large area. Collaboration between Photek and AWE has produced prototype devices that combine the excellent time response of small area MCP-PMTs with a large active area by replacing the traditional proximity-gap front section with an electro-optically focused photocathode to MCP. We present results from both single and double MCP devices with a 40 mm diameter active area and show simulations for the 100 mm device being built this year.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The influence of the AlN barrier thickness on the polarization Coulomb field scattering in AlN/GaN heterostructure field-effect transistors

The electron mobility scattering mechanisms in AlN/GaN heterostuctures with 3 nm and 6 nm AlN barrier thicknesses were investigated by temperature-dependent Hall measurements. The effect of interface roughness (IFR) scattering on the electron mobility was found to be enhanced by increasing AlN barrier thickness. Moreover, using the measured capacitance-voltage and current-voltage characteristics of the fabricated heterostructure field-effect transistors (HFETs) with different Schottky areas on the two heterostuctures, the variations of electron mobility with different gate biases were investigated. Due to enhanced IFR scattering, the influence of polarization Coulomb field (PCF) scattering on electron mobility was found to decrease with increasing AlN barrier layer thickness. However, the PCF scattering remained an important scattering mechanism in the AlN/GaN HFETs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of CZTSSe photovoltaic device with an atomic layer-deposited passivation layer

We describe a CZTSSe (Cu{sub 2}ZnSn(S{sub 1−x},Se{sub x}){sub 4}) photovoltaic (PV) device with an ALD (atomic layer deposition) coated buffer dielectric layer for CZTSSe surface passivation. An ALD buffer layer, such as TiO{sub 2}, can be applied in order to reduce the interface recombination and improve the device's open-circuit voltage. Detailed characterization data including current-voltage, admittance spectroscopy, and capacitance profiling are presented in order to compare the performance of PV devices with and without the ALD layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge transport across organic heterostructure: Role of interfacial density of states

The mechanism of carrier transport across organic-organic hetero-interfaces is crucial for organic devices. For purposes of this study, we choose two hole transport materials 4, 4′, 4″-tris(N-3-methylphenyl-N-phenyl-amino) triphenyl-amine (m-MTDATA) and N, N′-diphenyl-N, N′-bis(1-naphthyl) (1, 1′-biphenyl)-4, 4′diamine. We demonstrate that transport across such interfaces can be controlled by introducing a thin undoped layer, which is chosen to be 10–30 nm of m-MTDATA layer in this particular case. By correlating the low frequency capacitance-voltage and temperature dependence of current density-voltage (J-V) characteristics, we show that the occupation of local density of states (LDOS) on both sides controls the transport at the hetero-interface and that it can be modified by the introduction of interlayer. The thickness of the undoped interlayer effectively acts as a control on carrier concentration at the interface leading to the modification of the effective energy offset, and overlap of the LDOS. The slope of the J-V characteristics in the exponential regime has a temperature dependent term and a purely voltage dependent term. The temperature dependence of J-V characteristics is explained by including field dependence of mobility and tunneling across LDOS. We trace the origin of the offset at the hetero-interface and estimate its values for the different cases consistent with the proposed model of thermally assisted tunneling at the interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of carrier transport and carrier trapping in organic diodes with polyimide-6,13-Bis(triisopropylsilylethynyl)pentacene double-layer by charge modulation spectroscopy and optical second harmonic generation measurement

We studied the carrier transport and carrier trapping in indium tin oxide/polyimide (PI)/6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene)/Au diodes by using charge modulation spectroscopy (CMS) and time-resolved electric field induced optical second harmonic generation (TR-EFISHG) measurements. TR-EFISHG directly probes the spatial carrier behaviors in the diodes, and CMS is useful in explaining the carrier motion with respect to energy. The results clearly indicate that the injected carriers move across TIPS-pentacene thorough the molecular energy states of TIPS-pentacene and accumulate at the PI/TIPS-pentacene interface. However, some carriers are trapped in the PI layers. These findings take into account the capacitance-voltage and current-voltage characteristics of the diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large area graphene ion sensitive field effect transistors with tantalum pentoxide sensing layers for pH measurement at the Nernstian limit

We have fabricated and characterized large area graphene ion sensitive field effect transistors (ISFETs) with tantalum pentoxide sensing layers and demonstrated pH sensitivities approaching the Nernstian limit. Low temperature atomic layer deposition was used to deposit tantalum pentoxide atop large area graphene ISFETs. The charge neutrality point of graphene, inferred from quantum capacitance or channel conductance, was used to monitor surface potential in the presence of an electrolyte with varying pH. Bare graphene ISFETs exhibit negligible response, while graphene ISFETs with tantalum pentoxide sensing layers show increased sensitivity reaching up to 55 mV/pH over pH 3 through pH 8. Applying the Bergveld model, which accounts for site binding and a Guoy-Chapman-Stern picture of the surface-electrolyte interface, the increased pH sensitivity can be attributed to an increased buffer capacity reaching up to 10{sup 14} sites/cm{sup 2}. ISFET response was found to be stable to better than 0.05 pH units over the course of two weeks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of rapid thermal annealing on the electrical properties of the AlGaN/AlN/GaN heterostructure field-effect transistors with Ti/Al/Ni/Au gate electrodes

In this study, we investigated the electrical properties of the AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) with Ti/Al/Ni/Au gate electrodes using the measured capacitance-voltage, current-voltage characteristics, and micro-Raman spectroscopy. We found that the uneven distribution of the strain caused by the Schottky metals was a major factor that generates the polarization Coulomb field scattering in AlGaN/AlN/GaN HFETs, and after appropriate rapid thermal annealing (RTA) processes, the polarization Coulomb field scattering was greatly weakened and the two-dimensional electron gas electron mobility was improved. We also found that the Schottky barrier height and the DC characteristics of the devices became better after appropriate RTA. Of course, the electrical performances mentioned above became deteriorated after excessive annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗