Results for “Computer Tool” — Page 94

NASA NTRSDate not supplied

An Integrated Recursive Framework for Arbitrarily Multiscale and Multi-fidelity Modeling

The NASA Multiscale Analysis Tool (NAMSAT) serves as a state-of-the-art, “plug and play,” massively multiscale modeling (M3) platform for hierarchical materials and structures. The development of NASMAT has focused on modularity, upgradability and maintainability, interoperability, and utility. Application Program Interfaces (APIs) have been developed to facilitate the integration NASMAT into other programs (commercial, research, and user-defined) as well as the integration of other codes into NASMAT. NASMAT is an integrated, recursive platform that seamlessly allows for an arbitrary number of scales, and a variety of modeling fidelity, in a single, non-linear analysis. Thus, the macroscopic response of a material can be directly linked to the behavior of the microstructure(s), including subscale defects, making it a suitable tool for integrated computational materials engineering (ICME) because . Examples using NASMAT for simulation of polycrystalline metals at elevated temperatures will be presented.

Multiscale Modeling↗

NASA NTRSDate not supplied

Description of Cloud Characterization and Icing Test for a 3D Heated Test Article at the NASA Icing Research Tunnel

This paper describes the cloud characterization and icing tests conducted with a 3D heated test article in Winter/Spring 2022 at the NASA Icing Research Tunnel. The intent is to present analyzed results from these recently conducted tests in a future technical paper. The test article, whose geometry is representative of an inter-compressor duct and strut region of a turbofan engine, has been designed and constructed to study the physics of supercooled water icing and ice crystal icing. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, a scale to measure ice mass, and other instruments will aid in characterizing the icing behavior. The aim of these tests is to generate ice accretions on the SIDRM test article under well-characterized conditions. To that end, a suite of instruments was utilized to characterize the ice crystal clouds at the test section in a separate test series. The icing measurements collected during the SIDRM model tests will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assess the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost effective way.

Ice crystal icing↗

NASA NTRSDate not supplied

Description of Cloud Characterization and Icing Tests for a 3D Heated Test Article at the NASA Icing Research Tunnel

This paper describes the cloud characterization and icing tests conducted with a 3D heated test article in Winter/Spring 2022 at the NASA Icing Research Tunnel. The intent is to present analyzed results from these recently conducted tests in a future technical paper. The test article, whose geometry is representative of an inter-compressor duct and strut region of a turbofan engine, has been designed and constructed to study the physics of supercooled water icing and ice crystal icing. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, a scale to measure ice mass, and other instruments will aid in characterizing the icing behavior. The aim of these tests is to generate ice accretions on the SIDRM test article under well-characterized conditions. To that end, a suite of instruments was utilized to characterize the ice crystal clouds at the test section in a separate test series. The icing measurements collected during the SIDRM model tests will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assess the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost effective way.

Ice crystal icing, heated test article, engine ici↗

NASA NTRSDate not supplied

Qualitative Comparison of Pathfinder Three-Dimensional Transient Gas Granular Simulation Results to Imagery from a Subscale, Reduced Pressure Plume Surface Interaction Ground Test

NASA’s Game Changing Development Program, funded by NASA’s Space Technology Mission Directorate, the development of simulation capability for the prediction of extra-terrestrial Plume Surface Interaction (PSI) environments has been undertaken by the Fluid Dynamics Branch at NASA/MSFC. The PSI Project, planned to be completed over a four year period, contains a Predictive Simulation Capability (PSC) Element focused on creating simulation capability for the reliable and accurate prediction of PSI in Martian (~600 Pa) and Lunar (vacuum) ambient environments. In addition to the PSC Element, the PSI Project also contains a companion Ground Testing Element for development of focused datasets for validation of predictive capability as well as a Flight-focused Instrumentation Element. This paper describes the first Pathfinder three-dimensional, transient simulation of the test configuration used to acquire erosion and cratering test data as part of the Physics Focused Ground Test conducted by the PSI Project in FY2021. This first pathfinder simulation was conducted using the Loci/GGFS (Gas Granular Flow Solver), a computational fluid dynamics tool developed in part with funding provided by the PSI Project. Crater growth and ejecta flow paths from the pathfinder simulation is compared to raw high-speed imagery PFGT results of the crater growth. There is significant similarity of test and simulation to warrant expending resources on a more rigorous quantitative Validation Assessment.

J S West↗

NASA NTRSDate not supplied

Qualitative Comparison of Pathfinder Three-Dimensional Transient Gas Granular Simulation Results to Imagery from a Subscale, Reduced Pressure Plume Surface Interaction Ground Test

NASA’s Game Changing Development Program, funded by NASA’s Space Technology Mission Directorate, the development of simulation capability for the prediction of extra-terrestrial Plume Surface Interaction (PSI) environments has been undertaken by the Fluid Dynamics Branch at NASA/MSFC. The PSI Project, planned to be completed over a four year period, contains a Predictive Simulation Capability (PSC) Element focused on creating simulation capability for the reliable and accurate prediction of PSI in Martian (~600 Pa) and Lunar (vacuum) ambient environments. In addition to the PSC Element, the PSI Project also contains a companion Ground Testing Element for development of focused datasets for validation of predictive capability as well as a Flight-focused Instrumentation Element. This paper describes the first Pathfinder three-dimensional, transient simulation of the test configuration used to acquire erosion and cratering test data as part of the Physics Focused Ground Test conducted by the PSI Project in FY2021. This first pathfinder simulation was conducted using the Loci/GGFS (Gas Granular Flow Solver), a computational fluid dynamics tool developed in part with funding provided by the PSI Project. Crater growth and ejecta flow paths from the pathfinder simulation is compared to raw high-speed imagery PFGT results of the crater growth. There is significant similarity of test and simulation to warrant expending resources on a more rigorous quantitative Validation Assessment.

Jeff West↗

NASA NTRSDate not supplied

Icing Physics Studies Using the 3D SIDRM Test Article: Aerodynamic and Supercooled Liquid Icing Analysis

In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation capability. Experimental data is required for development of icing physics models and simulation validation. To that end, this paper presents the analysis of the supercooled liquid icing data subset from tests conducted in 2022 at the NASA Icing Research Tunnel that studied both supercooled water and ice-crystal icing. The test article that was utilized replicated 3D geometrical features of an inter-compressor duct and strut region of a turbofan engine. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with pressure taps, heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, and a scale to measure ice mass were utilized to characterize the icing behavior. The aim of these tests was to generate ice accretions on the SIDRM test article under well-characterized supercooled liquid icing and ice crystal icing conditions. This paper discusses measurements related to aerodynamic testing and supercooled liquid icing tests that were conducted. Aerodynamic measurements were analyzed and compared to computational simulations and were found to be in good agreement for the range of airspeeds (50 to 230 knots) and angles of attack (0 to 4°) tested. Various parametric sweeps were conducted during the supercooled liquid icing portion of the test entry (cloud median volumetric diameter ranged from 15 to 90 µm, total air temperature from -3 to -17 °C, angle of attack from 0 to 4°, and accretion time from 5 to 20 min). These sweeps were performed to measure that parameter’s impact on ice accretion size, location (icing extent), characteristics (such as glaze/rime ice and shedding behavior), and test article surface temperature. Analysis of the test data showed that clouds composed of larger drops, colder air temperatures, smaller angles of attack, and longer spray times were the primary parameters that resulted in accretions with greater ice mass. Test article angle of attack and cloud droplet size influenced the location of ice accretion as these two parameters directly impact collection efficiency. With respect to icing characteristics, total air temperature dictated icing type, and smaller cloud drop size along with warmer air temperatures resulted in greater amounts of ice shedding. Surface temperature increased during ice accretion from the release of latent (fusion) heat, where total air temperature and cloud drop size impacted the amount of surface temperature change. The icing measurements collected during the SIDRM tests will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assesses the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost effective way.

supercooled liquid icing↗

NASA NTRSDate not supplied

Development of the Mod II X-57 Piloted Simulator and Flying Qualities Predictions

This paper discusses the development of the X-57 Mod II piloted simulator along with the predicted flight dynamics of the airplane. The piloted simulator models were initially based on data published by Tecnam on a P2006T airplane but were further improved upon through parameter identification of flight data as well as modeling tools such as computational fluid dynamics. In addition to having accurate flight models, a realistic cockpit was constructed to aid pilot training. From the piloted simulator, an understanding of how the airplane will behave throughout the flight envelope using established FAR and MIL standards is discussed. Using the simulation results, this paper will show that the airplane is predicted to be statically and dynamically stable as well as having Level 1 flying qualities.

Ryan Wallace↗

NASA NTRSDate not supplied

Icing Physics Studies Using the 3D SIDRM Test Article: Aerodynamic and Supercooled Liquid Icing Analysis

In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation capability. Experimental data is required for development of icing physics models and simulation validation. To that end, this paper discusses analyzed data from icing tests conducted with a 3D test article in 2022 at the NASA Icing Research Tunnel. The test article, whose geometry is representative of an inter-compressor duct and strut region of a turbofan engine, has been designed and constructed to study the physics of supercooled water icing and ice crystal icing. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with pressure taps, heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, and a scale to measure ice mass were utilized to characterize the icing behavior. The aim of these tests was to generate ice accretions on the SIDRM test article under well-characterized supercooled liquid icing and ice crystal icing conditions. This paper discusses measurements related to aerodynamic tests and supercooled liquid icing tests that were conducted. Aerodynamic measurements were analyzed and compared to computational simulations and were found to be in good agreement for the range of airspeeds (50 to 230 knots) and angles of attack (0 to 4°) tested. Various parametric sweeps were conducted during the supercooled liquid icing portion of the test entry (cloud median volumetric diameter ranged from 15 to 90 µm, total air temperature from -3 to -17 °C, angle of attack from 0 to 4°, and accretion time from 5 to 20 min). These sweeps were performed to measure that parameter’s impact on ice accretion size, location, characteristics (such as glaze/rime ice and shedding behavior), and test article surface temperature. Analysis of the test data showed that clouds composed of larger drops, colder air temperatures, smaller angles of attack, and longer spray times were the primary parameters that resulted in accretions with greater ice mass. Test article angle of attack and cloud droplet size influenced the location of ice accretion as these two parameters directly impact collection efficiency. With respect to icing characteristics, total air temperature dictated icing type, and smaller cloud drop size along with warmer air temperatures resulted in greater amounts of ice shedding. Surface temperature increased during ice accretion from the release of latent (fusion) heat, where total air temperature and cloud drop size impacted the amount of surface temperature change. The icing measurements collected during the SIDRM tests will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assesses the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost‑effective way.

supercooled liquid icing↗

NASA NTRSDate not supplied

Icing Physics Studies Using the 3D SIDRM Test Article: Ice Crystal Icing Analysis

In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation capability. Experimental data is required for the development of icing physics models and simulation validation. This paper presents the analysis of the ice crystal icing data subset from tests conducted in 2022 at the NASA Icing Research Tunnel that studied both supercooled liquid and ice-crystal icing. The test article that was utilized replicated 3D geometrical features of an inter-compressor duct and strut region of a turbofan engine. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with pressure taps, heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, and a weighing scale to measure ice mass were utilized to characterize the icing behavior. The aim of these tests was to generate ice accretions on the SIDRM test article under well-characterized icing conditions. To that end, ice crystal cloud characterization tests were conducted that provided cloud property values at the test section. The ice crystal accretion tests investigated how different test condition parameters impacted ice accretion size, location, and characteristics (such as physical attributes). A key finding was that a sufficiently high surface heat flux at the leading edge can provide a continuous supply of liquid melt to critical accretion zones downstream, resulting in elevated ice mass accretions. Another key finding was that warmer heater settings in critical accretion zones can suppress ice accretion. These findings are consistent with icing behavior observed in full-scale engine icing tests conducted previously at the NASA Glenn Research Center. Test runs investigating the contribution of liquid melt generated at the leading edge found that the melt can be transported downstream to critical accretion regions in two forms, via runback and splash. The form of melt supplied downstream affected accretion behavior and features. Sharkteeth-shaped ice accretions were generated at certain test conditions, a physical attribute that has been observed in full-scale engine icing tests. The ice accretion data will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assesses the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost‑effective way.

ice crystal icing↗

NASA NTRSDate not supplied

Icing Physics Studies Using the 3D SIDRM Test Article: Ice Crystal Icing Analysis

In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation capability. Experimental data is required for the development of icing physics models and simulation validation. This paper presents the analysis of the ice crystal icing data subset from tests conducted in 2022 at the NASA Icing Research Tunnel that studied both supercooled liquid and ice-crystal icing. The test article that was utilized replicated 3D geometrical features of an inter-compressor duct and strut region of a turbofan engine. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with pressure taps, heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, and a weighing scale to measure ice mass were utilized to characterize the icing behavior. The aim of these tests was to generate ice accretions on the SIDRM test article under well-characterized icing conditions. To that end, ice crystal cloud characterization tests were conducted that provided cloud property values at the test section. The ice crystal accretion tests investigated how different test condition parameters impacted ice accretion size, location, and characteristics (such as physical attributes). A key finding was that a sufficiently high surface heat flux at the leading edge can provide a continuous supply of liquid melt to critical accretion zones downstream, resulting in elevated ice mass accretions. Another key finding was that warmer heater settings in critical accretion zones can suppress ice accretion. These findings are consistent with icing behavior observed in full-scale engine icing tests conducted previously at the NASA Glenn Research Center. Test runs investigating the contribution of liquid melt generated at the leading edge found that the melt can be transported downstream to critical accretion regions in two forms, via runback and splash. The form of melt supplied downstream affected accretion behavior and features. Sharkteeth-shaped ice accretions were generated at certain test conditions, a physical attribute that has been observed in full-scale engine icing tests. The ice accretion data will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assesses the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost‑effective way.

ice crystal icing↗

NASA NTRSDate not supplied

Toward Adaptive Mixed-Element Unstructured Grids for Simulations of Viscous Flows

Accurate prediction of surface skin friction and heat transfer for viscous flow applications using computational fluid dynamics tools necessitates thin wall-normal elements in the boundary layer. A tetrahedral adaptation process is extended to incorporate the advancing front local reconnection procedure. Thin boundary-layer grids are adapted from the solution, which governs the boundary-layer grid parameters such as first cell height off the wall. The process enables grid-converged steady-state results from a CAD file. Results are presented across the speed range from low subsonic flow over an airfoil to high-speed flows over blunt bodies and a rocket.

CFD↗

NASA NTRSDate not supplied

A NASA Perspective on Quantum AI, Error Correction, and Beyond

Quantum computing is one of the most enticing computational paradigms with the potential to revolutionize diverse areas of future-generation computational systems. While quantum computing hardware has advanced rapidly, from tiny laboratory experiments to quantum chips that can outperform even the largest supercomputers on specialized computational tasks, these noisy-intermediate scale quantum (NISQ) processors are still too small and non-robust to be directly useful for any real-world applications. We discuss the prospects for quantum computing and AI, highlighting advances in algorithms, both near- and longer-term. Quantum error correction is critical to the realization of any such vision. The talk with touch on some recent exciting advanced in quantum error correction, particularly in dynamical codes. The talk will conclude with an example of how the combination of quantum computing and artificial intelligence can help probe fundamental aspect of quantum physics.

quantum optimization algorithms and sampling↗

NASA NTRSDate not supplied

Toward Adaptive Mixed-Element Unstructured Grids for Simulations of Viscous Flows

Accurate prediction of surface skin friction and heat transfer for viscous flow applications using computational fluid dynamics tools necessitates thin wall-normal elements in the boundary layer. A tetrahedral adaptation process is extended to incorporate the advancing front local reconnection procedure. Thin boundary-layer grids are adapted from the solution, which governs the boundary-layer grid parameters such as first cell height off the wall. The process enables grid-converged steady-state results from a CAD file. Results are presented across the speed range from low subsonic flow over an airfoil to high-speed flows over blunt bodies and a rocket.

chemically reacting flow↗

NASA NTRSDate not supplied

Multiscale Modeling of Woven Ablative Thermal Protection System Materials

The NASA Entry Systems Modeling project maintains a portfolio of computational model and tool development activities focused on reducing performance uncertainties in ablative Thermal Protection System (TPS) materials for NASA missions. The development activities span material scale and strive to allow microstructural characterization of material structure and properties, mesoscale analyses of damage, and macroscale evaluation of heatshield performance and recession in a given aerothermodynamic environment. This talk will detail the application of developed capabilities at all three scales to the woven TPS material that the Agency has selected as the heatshield for the Mars Sample Return Earth Entry System (MSR-EES) mission – 3D Mid-Density Carbon Phenolic (3MDCP). Each of the applications focuses on driving down uncertainties in material performance and thus risk for MSR-EES and other future missions that may leverage woven TPS. At the microscale, machine learning techniques are used to characterize images from destructive microscopy and inform structural variability. At the mesoscale, Lagrangian techniques are used to simulate ballistic impact and interpret damage modes noted in experiments. At the macroscale, coupled flow-material response techniques are validated by Arc Jet testing to enable heatshield design for missions with massive ablation.

Justin B Haskins↗

NASA NTRSDate not supplied

Time-History Statistics of Soot Formation in A Model Gas Turbine Combustor

Soot formation is a complex dynamic and intermittent process determined by properties of the fuel, combustor design, and combustor operation. Although the major steps in soot formation (i.e., formation of precursors, inception, growth and evolution) are similar for a variety of carbonaceous fuels, applications, and operating conditions, it remains unclear when the temporal transition between these steps occurs. An engineering prediction tool coupled with computational fluid physics (CFD), therefore needs to accurately model all these complex steps. To develop such a model, we propose the time-history concept for understanding the time dependency of soot formation as a function of local properties (i.e., temperature, velocity, local fuel air ratio, etc.). We continue our previous work with modeling the DLR aero-combustor [1] with our updated in-house CFD code, Open National Combustion Code (OpenNCC), that now includes a Multiple Time-Scale Flamelet Progress Variable approach and a the semi-empirical two-equation soot model. We injected massless tracer particles upstream of the injector region of the combustor to collect time-history statistics of the solution variables. The correlations between the collected statistics with respect to the experimental soot volume fraction data showed that time-history effect of certain flow variables, including turbulent kinetic energy (TKE), and multiple species is indeed important for soot formation. We then conducted a time-history based correlation analysis to determine the key species and the concentration ranges critical for soot formation (C6H5-based nucleation, acetylene-based surface growth, and oxidation with OH and O2). Based on the time-history correlation coefficient (THCC) analysis, we propose possible modifications to improve the current two-equation model.

LES↗

DOE OSTI2020

Accomplishments and Year-End Performance Report: Wind Energy Program, Fiscal Year 2020

Offering broad-based technical expertise and world-class capabilities and facilities, NREL leverages these assets to provide the wind industry with a better understanding of fundamental physics, high-performance computing-enabled simulation tools, and the physical validation necessary to significantly lower the cost of wind energy. This report provides an overview of the many achievements NREL delivered on behalf of DOE's Wind Energy Technologies Office (WETO) and other partners during Fiscal Year (FY) 2020.

49 EE - Wind and Water Power Program - Wind (EE-4W↗

DOE OSTI2022

Modeling Cosmic Reionization

The transformation of cold neutral intergalactic hydrogen into a highly ionized warm plasma marks the end of the cosmic dark ages and the beginning of the age of galaxies. The details of this process reflect the nature of the early sources of radiation and heat, the statistical characteristics of the large-scale structure of the Universe, the thermodynamics and chemistry of cosmic baryons, and the histories of star formation and black hole accretion. A number of massive data sets from new ground- and space-based instruments and facilities over the next decade are poised to revolutionize our understanding of primeval galaxies, the reionization photon budget, the physics of the intergalactic medium (IGM), and the fine-grained properties of hydrogen gas in the "cosmic web". In this review we survey the physics and key aspects of reionization-era modeling and describe the diverse range of computational techniques and tools currently available in this field.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

2.3.4.501 - Synthesis and Analysis of Performance-Advantaged Bioproducts

This project focuses on the synthesis and analysis of performance-advantaged bioproducts (PABPs). We have established collaborations with other BETO-funded projects and academic and industrial collaborators to source new molecules that have promising manufacturing pathways and that could be serve as performance-advantaged biochemicals or biopolymers. We conduct synthesis and characterization of biochemicals and biopolymers alongside techno-economic analysis and life cycle assessment to estimate their cost and environmental impacts relative to incumbent materials. As part of the project, Profs. Linda Broadbelt and Brent Shanks are developing computational pathway prediction tools to identify optimal production pathways for bio-based compounds via biological and chemo-catalytic transformations. When coupled to the polyID tool from the Inverse Design project, these tools will ultimately enable a narrowing of design space for PABPs. From FY21-FY23, we described a framework for benchmarking PAPBs, estimated the energy and GHG emissions for commodity organic chemicals, developed performance-advantaged nylons and polyesters from beta-ketoadipic acid, and produced lignin-based plasticizers. We have shown that aromatic amines can be used in performance thermosets and that polyhydroxyalkanoates with crosslinked side chains can exhibit rubber-like properties, along with repair and degradability. We are working actively with industry partners on scale-up and validation of multiple PABPs.

BIOMASS FUELS↗