Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

The effect of microscopic texture on the direct plasma surface passivation of Si solar cells

Textured silicon surfaces are widely used in manufacturing of solar cells due to increasing the light absorption probability and also the antireflection properties. However, these Si surfaces have a high density of surface defects that need to be passivated. In this study, the effect of the microscopic surface texture on the plasma surface passivation of solar cells is investigated. The movement of 10{sup 5} H{sup +} ions in the texture-modified plasma sheath is studied by Monte Carlo numerical simulation. The hydrogen ions are driven by the combined electric field of the plasma sheath and the textured surface. The ion dynamics is simulated, and the relative ion distribution over the textured substrate is presented. This distribution can be used to interpret the quality of the Si dangling bonds saturation and consequently, the direct plasma surface passivation.

36 MATERIALS SCIENCE↗

Spurious Grain Formation at Cross-Sectional Expansion During Directional Solidification: Influence of Thermosolutal Convection

Formation of spurious grains during directional solidification (DS) of Al-7 wt.% Si and Al-19 wt.% Cu alloys through an abrupt increase in cross-sectional area has been examined by experiments and by numerical simulations. Stray grains were observed in the Al-19 wt.% Cu samples and almost none in the Al-7 wt.% Si. The locations of the stray grains correlate well where numerical solutions indicate the solute-rich melt to be flowing up the thermal gradient faster than the isotherm velocity. It is proposed that the spurious grain formation occurred by fragmentation of slender tertiary dendrite arms was enhanced by thermosolutal convection. In Al-7 wt.% Si, the dendrite fragments sink in the surrounding melt and get trapped in the dendritic array growing around them, and therefore they do not grow further. In the Al-19 wt.% Cu alloy, on the other hand, the dendrite fragments float in the surrounding melt and some find conducive thermal conditions for further growth and become stray grains.

36 MATERIALS SCIENCE↗

Effect of Substrate Thickness on Oxide Scale Spallation for Solid Oxide Fuel Cells

In this paper, the effect of the ferritic substrate's thickness on the delamination/spallation of the oxide scale was investigated experimentally and numerically. At the high-temperature oxidation environment of solid oxide fuel cells (SOFCs), a combination of growth stress with thermal stresses may lead to scale delamination/buckling and eventual spallation during SOFC stack cooling, even leading to serious degradation of cell performance. The growth stress is induced by the growth of the oxide scale on the scale/substrate interface, and thermal stress is induced by a mismatch of the coefficient of thermal expansion between the oxide scale and the substrate. The numerical results show that the interfacial shear stresses, which are the driving force of scale delamination between the oxide scale and the ferritic substrate, increase with the growth of the oxide scale and also with the thickness of the ferritic substrate; i.e., the thick ferritic substrate can easily lead to scale delamination and spallation. Experimental observation confirmed the predicted results of the delamination and spallation of the oxide scale on the ferritic substrate.

30 DIRECT ENERGY CONVERSION↗

Quasi-optical electron transport across a magnetically induced junction on a topological insulator surface

Quasi-optical Dirac electron transport is theoretically analyzed at the magnetic boundaries on a topological insulator (TI) surface. The electronic band mismatch induced by the spatially varying magnetization profile can form an effective junction akin to the electrostatic potential step. The transmission/reflection characteristics show a direct dependence on electron energy and incident angle with highly asymmetric patterns. The investigation also illustrates a nontrivial anomalous Hall current along the boundary which is further shown by a numerical simulation based on the finite-difference time-domain method. The results provide key design guidelines for prospective quasi-optical devices based on the TI-magnet heterostructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetization processes in core/shell exchange-spring structures.

The magnetization reversal processes in cylindrical and spherical soft core/hard shell exchange-spring structures are investigated via the analytical nucleation theory, and are verified with numerical micromagnetic simulations. At small core sizes, the nucleation of magnetic reversal proceeds via the modified bulging mode, where the transverse component of the magnetization is only semi-coherent in direction and the nucleation field contains a contribution from self-demagnetization. For large core sizes, the modified curling mode, where the magnetization configuration is vortex-like, is favored at nucleation. The preference for the modified curling mode is beneficial in that the fluxclosure allows cylindrical and spherical core/shell exchange-spring elements to be densely packed into bulk permanent magnets without affecting the nucleation field, thereby offering the potential for high energy product.

Jiang, J. S.↗

A numerical simulation of solar energetic particle dropouts during impulsive events

This paper investigates the conditions for producing rapid variations of solar energetic particle (SEP) intensity commonly known as 'dropouts'. In particular, we use numerical model simulations based on solving the focused transport equation in the three-dimensional Parker interplanetary magnetic field to put constraints on the properties of particle transport coefficients in both directions perpendicular and parallel to the magnetic field. Our calculations of the temporal intensity profile of 0.5 and 5 MeV protons at the Earth show that the perpendicular diffusion must be small while the parallel mean free path is long in order to reproduce the phenomenon of SEP dropouts. When the parallel mean free path is a fraction of 1 AU and the observer is located at 1 AU, the perpendicular to parallel diffusion ratio must be below 10{sup –5} if we want to see the particle flux dropping by at least several times within 3 hr. When the observer is located at a larger solar radial distance, the perpendicular to parallel diffusion ratio for reproducing the dropouts should be even lower than that in the case of 1 AU distance. A shorter parallel mean free path or a larger radial distance from the source to observer will cause the particles to arrive later, making the effects of perpendicular diffusion more prominent and SEP dropouts disappear. All of these effects require the magnetic turbulence that resonates with the particles to be low everywhere in the inner heliosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Evidence of Recent Material Transport within a Binary Asteroid System

Images acquired by the Double Asteroid Redirection Test (DART) before its impact into Dimorphos—the moon of the Didymos binary asteroid system—unexpectedly reveal a set of discontinuous rays spanning the imaged surface. These albedo features are visible only after correcting for lighting differences, which normalize the effects of the pervasive boulders that cover the surface. Comparison to physical experiments and numerical simulations shows that these bright, fan-shaped albedo features are consistent with the aftermath of a low-velocity impact into a field of boulders and provide our first direct evidence for the transfer of material in a binary asteroid system due to the shedding material from radiative torques. Parts of these and possible additional albedo markings from the reentry of boulders after the DART impact may be visible to the Hera mission when it explores the post-DART Didymos system.

Astronomy and AstroPhysics↗

Improving the prediction of DNI with physics-based representation of all-sky circumsolar radiation

Direct normal irradiance (DNI) is often interpreted differently in ground measurements and forecasts using numerical weather prediction (NWP) models, leading to substantial bias in DNI forecasting especially under cloudy-sky conditions. To mitigate the bias, we use the Fast All-sky Radiation Model for Solar applications with DNI (FARMS-DNI) to conduct physics-based simulations of solar radiation in the circumsolar region. The DNI is quantified using the sum of the radiation along the sun direction and the scattered radiation within the circumsolar region. FARMS-DNI is coupled with the Weather Research and Forecasting model with solar extensions (WRF-Solar) to predict day-ahead DNI in 9-km pixels over an extended domain covering the contiguous United States. The DNI forecasts for the entire year of 2018 are validated using surface-based observations at the Atmospheric Radiation Measurement (ARM) and Surface Radiation Budget Network (SURFRAD) sites and a satellite-based solar radiation product developed by the procedure of the National Solar Radiation Data Base (NSRDB). The results show that the WRF-Solar coupled with the conventional Beer-Bouguer-Lambert law underestimes the overall DNI forecasts by 30%-60%, which is a joint effect of the uncertainties in computing the circumsolar radiation and forecasting cloud properties. This bias is significantly reduced by using FARMS-DNI.

14 SOLAR ENERGY↗

A conservative scheme of drift kinetic electrons for gyrokinetic simulation of kinetic-MHD processes in toroidal plasmas

A conservative scheme of drift kinetic electrons for gyrokinetic simulations of kinetic-magnetohydrodynamic processes in toroidal plasmas has been formulated and verified. Both vector potential and electron perturbed distribution function are decomposed into adiabatic part with analytic solution and non-adiabatic part solved numerically. The adiabatic parallel electric field is solved directly from the electron adiabatic response, resulting in a high degree of accuracy. Here, the consistency between electrostatic potential and parallel vector potential is enforced by using the electron continuity equation. Since particles are only used to calculate the non-adiabatic response, which is used to calculate the non-adiabatic vector potential through Ohm's law, the conservative scheme minimizes the electron particle noise and mitigates the cancellation problem. Linear dispersion relations of the kinetic Alfvén wave and the collisionless tearing mode in cylindrical geometry have been verified in gyrokinetic toroidal code simulations, which show that the perpendicular grid size can be larger than the electron collisionless skin depth when the mode wavelength is longer than the electron skin depth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extended Lagrangian Born–Oppenheimer molecular dynamics using a Krylov subspace approximation

It is shown how the electronic equations of motion in extended Lagrangian Born–Oppenheimer molecular dynamics simulations can be integrated using low-rank approximations of the inverse Jacobian kernel. This kernel determines the metric tensor in the harmonic oscillator extension of the Lagrangian that drives the evolution of the electronic degrees of freedom. The proposed kernel approximation is derived from a pseudoinverse of a low-rank estimate of the Jacobian, which is expressed in terms of a generalized set of directional derivatives with directions that are given from a Krylov subspace approximation. The approach allows a tunable and adaptive approximation that can take advantage of efficient preconditioning techniques. The proposed kernel approximation for the integration of the electronic equations of motion makes it possible to apply extended Lagrangian first-principles molecular dynamics simulations to a broader range of problems, including reactive chemical systems with numerically sensitive and unsteady charge solutions. This can be achieved without requiring exact full calculations of the inverse Jacobian kernel in each time step or relying on iterative non-linear self-consistent field optimization of the electronic ground state prior to the force evaluations as in regular direct Born–Oppenheimer molecular dynamics. We note the low-rank approximation of the Jacobian is directly related to Broyden’s class of quasi-Newton algorithms and Jacobian-free Newton–Krylov methods and provides a complementary formulation for the solution of nonlinear systems of equations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diagnosis of information scrambling from Hamiltonian evolution under decoherence

We apply a quantum teleportation protocol based on the Hayden-Preskill thought experiment to quantify how scrambling a given quantum evolution is. It has an advantage over the direct measurement of out-of time ordered correlators when used to diagnose the information scrambling in the presence of decoherence effects stemming from a noisy quantum device. We demonstrate the protocol by applying it to two physical systems: Ising spin chain and SU(2) lattice Yang-Mills theory. To this end, we numerically simulate the time evolution of the two theories in the Hamiltonian formalism. The lattice Yang-Mills theory is implemented with a suitable truncation of Hilbert space on the basis of the Kogut-Susskind formalism. On a two-leg ladder geometry and with the lowest nontrivial spin representations, it can be mapped to a spin chain, which we call Yang-Mills-Ising model and is also directly applicable to future digital quantum simulations. Here, we find that the Yang-Mills-Ising model shows the signal of information scrambling at late times.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Large eddy simulation and laser diagnostic studies on a low swirl stratified premixed flame

This paper presents numerical simulations and laser diagnostic experiments of a swirling lean premixed methane/air flame with an aim to compare different Large Eddy Simulations (LES) models for reactive flows. An atmospheric-pressure laboratory swirl burner has been developed wherein lean premixed methane/air is injected in an unconfined low-speed flow of air. The flame is stabilized above the burner rim in a moderate swirl flow, triggering weak vortex breakdown in the downstream direction. Both stereoscopic (3-component) PIV and 2-component PIV are used to investigate the flow. Filtered Rayleigh scattering is used to examine the temperature field in the leading flame front. Acetone-Planar Laser Induced Fluorescence (PLIF) is applied to examine the fuel distribution. The experimental data are used to assess two different LES models; one based on level-set G-equation and flamelet chemistry, and the other based on finite rate chemistry with reduced kinetics. The two LES models treat the chemistry differently, which results in different predictions of the flame dynamic behavior and statistics. Yet, great similarity of flame structures was predicted by both models. The LES and experimental data reveal several intrinsic features of the low swirl flame such as the W-shape at the leading front, the highly wrinkled fronts in the shear layers, and the existence of extinction holes in the trailing edge of the flame. The effect of combustion models, the numerical solvers and boundary conditions on the flame and flow predictions was systematically examined. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study on the Impact Characteristics of Submerged CO{sub 2} and O{sub 2} Mixed Injection (S-COMI) in EAF Steelmaking

A new type of oxygen-supplying technology was developed for electric arc furnace (EAF) steelmaking using submerged CO{sub 2} and O{sub 2} mixed injection (S-COMI). S-COMI injects O{sub 2} into the molten steel bath directly by a submerged injector installed in the furnace bed; so the metallurgical reactions can be accelerated with a high utilization ratio of oxygen. However, there has been limited research on the impact characteristics of the S-COMI submerged gas jet in EAF steelmaking. In this study, water model experiments and numerical simulations were carried out to analyze the submerged gas jet behavior, and a theoretical model was built to depict the axis trajectory of submerged gas jet in the liquid bath. The numerical results were validated against the water model experiments to show that the gas flow rate and the installed angle have a significant influence on the jet impact characteristics. The results show that as the gas flow rate increases, the horizontal and vertical penetration distances increase; as the installed angle increases, the horizontal penetration distance increases while the vertical penetration distance decreases. In addition, the erosion mechanism of the element around the submerged injector exit was studied. As the installed angle increases, the velocity component in the vertical direction increases, the fluid flow is accelerated, and the wall shear stress of the underpart of the injector element increases. Therefore, the erosion rate of the upper part of the element decreases, while that of the underpart increases.

36 MATERIALS SCIENCE↗

Magnetic Field of Conductive Objects as Superposition of Elementary Eddy Currents and Eddy Current Tomography

The paper represents induced currents in an electrically conductive object as a totality of elementary eddy currents. The proposed scanning method includes measurements of only one component of the secondary magnetic field. Reconstruction of the current distribution is performed by deconvolution with regularization. Numerical modeling supported by the field experiments show that this approach is of direct practical relevance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A High-temperature Sealing Technology for Solid Oxide Fuel Cells

A reliable, cost-effective high-temperature sealing technology for the joining of ceramic components to metallic structures is critical to the successful development of solid oxide fuel cells (SOFCs). In this paper, our latest development of a novel reactive air brazing (RAB) technology will be presented. This RAB technology uses Ag-CuO as the base braze composition with a variety of additional elements. With a proper processing control, the resultant sealing technology is capable of providing a high-temperature sealing with sufficient chemical inertness, thermal reliability, and bonding strength. We will present in this paper our latest studies on the composition design/synthesis of braze filler materials, and the characterizations including wettability, microstructure, and mechanical properties, as well as a preliminary numerical simulation addressing the residual stress generated during the processing.

30 DIRECT ENERGY CONVERSION↗

Revisited global drift fluid model for linear devices

The problem of energy conserving global drift fluid simulations is revisited. It is found that for the case of cylindrical plasmas in a homogenous magnetic field, a straightforward reformulation is possible avoiding simplifications leading to energetic inconsistencies. The particular new feature is the rigorous treatment of the polarisation drift by a generalization of the vorticity equation. The resulting set of model equations contains previous formulations as limiting cases and is suitable for efficient numerical techniques. Examples of applications on studies of plasma blobs and its impact on plasma target interaction are presented. The numerical studies focus on the appearance of plasma blobs and intermittent transport and its consequences on the release of sputtered target materials in the plasma. Intermittent expulsion of particles in radial direction can be observed and it is found that although the neutrals released from the target show strong fluctuations in their propagation into the plasma column, the overall effect on time averaged profiles is negligible for the conditions considered. In addition, the numerical simulations are utilised to perform an a-posteriori assessment of the magnitude of energetic inconsistencies in previously used simplified models. It is found that certain popular approximations, in particular by the use of simplified vorticity equations, do not significantly affect energetics. However, popular model simplifications with respect to parallel advection are found to provide significant deterioration of the model consistency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of tritium-rich fuel to improve the yield of layered deuterium/tritium inertial fusion capsules

In deuterium–tritium (DT) ice layered implosions, nearly all hot spot mass at peak burn comes from the dense fuel. Accurate prediction of the fuel mass ablation, including the enthalpy associated with mass inflow into the hot spot from the dense fuel, is essential to understanding the energetics and ignition of the hot spot in layered implosions. A recently published boundary layer analysis (Daughton et al., 2023) indicates a faster mass ablation rate than in previous analyses of layered implosions. Inclusion of this effect provides a better match to simulations and leads to a new ignition threshold where the temperature of the dense fuel plays a critical role. This analysis motivates possible new directions for improved capsule performance. Here, the authors present evidence in support of one such approach: the use of tritium-rich ice to decrease 14 MeV neutron scattering and heating of the dense fuel, resulting in less mass ablation and more robust burn of the hot spot. It is found from numerical simulations that despite a less favorable D:T ratio in the ice, the use of a 40:60 D:T ratio leads to an increase in capsule yield of 17% percent compared with that of a 50:50 D:T ratio fuel for capsules resembling those of the recent N210808 ignition experiment on the NIF (Abu-Shawareb et al., 2022) and an increase of 74% compared with that of a 60:40 D:T ratio fuel capsule. Finally, these results are potentially important for modeling all layered implosions, since some degree of DT fractionization may arise naturally during the beta layering process. In addition, this physics is important for the feasibility of high-gain capsule designs that seek to minimize tritium usage, as in some inertial fusion energy concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Asymptotic behavior of the mixed mass in Rayleigh–Taylor and Richtmyer–Meshkov instability induced flows

Rayleigh–Taylor instability (RTI) and Richtmyer–Meshkov instability (RMI) are serious practical issues in inertial confinement fusion research, and also have relevance to many cases of astrophysical fluid dynamics. So far, much of the attention has been paid to the late-time scaling of the mixed width, which is used as a surrogate to how well the fluids have been mixed. Yet, the actual amount of mixed mass could be viewed as a more direct indicator on the evolution of the mixing layers due to hydrodynamic instabilities. Despite its importance, there is no systematic study as yet on the scaling of the mixed mass for either the RTI or the RMI induced flow. In this article, the normalized mixed mass (Ψ) is introduced for measuring the efficiency of the mixed mass. Six large numerical simulation databases have been employed: the RTI cases with heavy-to-light fluid density ratios of 1.5, 3, and 9; the single shock RMI cases with density ratios of 3 and 20; and a reshock RMI case with density ratio of 3. Using simulated flow fields, the normalized mixed mass Ψ is shown to be more sensitive in discriminating the variation with Atwood number for the RTI flows. Moreover, Ψ is demonstrated to provide more consistent results for both the RTI and RMI flows when compared with the traditional mixedness parameters, Ξ and Θ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗