Search NASA⌕ Search

SEARCH · Search NASA

Results for “Edge Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Investigation of the Impact of Flow on MHD Perturbations with the NIMROD Code (Final Report)

This work will enable improved understanding of tokamak edge flows and impurity-species dynamics and their impact on MHD stability as it relates to ELMs, RMPs and QH-mode by leveraging computational developments of the NIMROD code. Experimentally, it is established that the tokamak flows and impurities species can have a substantial effect on MHD stability. This is particularly true for the edge plasma where, for example, large flow shear is correlated with the occurrence of the Quiescent H-mode (QH- mode) state as opposed to operation with edge localized modes (ELMs). Understanding plasma flows is challenging because of the many physical effects that come into play: particle orbits loss, neutrals dynamics, and interaction between multiple ion species with decoupled motion. We will develop a model that incorporates multiple ion species into the MHD framework that includes self-consistent magnetic-field evolution. With this model we will understand how the presence of impurities impacts the tokamak edge-pedestal flows. Finally, we will quantify the impact of the new multiple species modeling on 3D QH-mode simulations. This work will have broader impacts on all MHD studies when multiple species are present (as is the case in modern tokamaks), as well as contributing to the edge and transport communities who also are interested in the studies of multiple-ion-species flows in the edge pedestal region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of Flame Cut Heavy Steel: Modeling of Temperature History and Residual Stress Formation

Heavy steel plates are used in demanding applications that require both high strength and hardness. An important step in the production of such components is cutting the plates with a cost-effective thermal cutting method such as flame cutting. Flame cutting is performed with a controlled flame and oxygen jet, which burns the steel and forms a cutting edge. However, the thermal cutting of heavy steel plates causes several problems. A heat-affected zone (HAZ) is generated at the cut edge due to the steep temperature gradient. Consequently, volume changes, hardness variations, and microstructural changes occur in the HAZ. In addition, residual stresses are formed at the cut edge during the process. In the worst case, unsuitable flame cutting practices generate cracks at the cut edge. The flame cutting of thick steel plate was modeled using the commercial finite element software ABAQUS. The results of modeling were verified by X-ray diffraction-based residual stress measurements and microstructural analysis. The model provides several outcomes, such as obtaining more information related to the formation of residual stresses and the temperature history during the flame cutting process. In addition, an extensive series of flame cut samples was designed with the assistance of the model.

36 MATERIALS SCIENCE↗

An experimental and theoretical study of adenine adsorption on Au(111)

A model study of adenine adsorption on the Au(111) surface is reported for molecular adlayers prepared by evaporation in vacuum and deposition from saturated aqueous solution. The electronic structure and adsorption geometry of the molecular films were studied experimentally by X-ray photoelectron spectroscopy and near edge X-ray absorption fine structure spectroscopy. Adsorption models are proposed for the adlayers arising from the different preparation methods. Density functional theory calculations were used to examine both parallel and upright adenine adsorption geometries, supply additional information on the bond strength, and identify which atom is involved in bonding to Au(111). In the case of deposition in vacuum, the adenine molecule is bound via van der Waals forces to Au(111) with the molecular plane parallel to the surface, consistent with the published scanning tunneling microscopy data on this system. The most stable parallel adenine configuration was found to have an adsorption energy of ca. -1.1 eV using the optB86b-vdW functional. For adenine deposition from aqueous solution, the adlayer is disordered, with molecules in an upright geometry, and with an adsorption energy of ca. -1.0 eV, coordinated via the imino N3 nitrogen atom. The present study contributes to the substantial literature of model studies of adenine on Au(111), complementing the existing knowledge with information on electronic structure, bonding geometry and adsorption energy of this system.

Acres, Robert G.↗

What Questions Would a Systems Engineer Ask to Assess Systems Engineering Models as Credible

Digital Systems Engineering strategies typically call for digital Systems Engineering models to be retained in repositories and certified as an authoritative source of truth (enabling model reuse, qualification, and collaboration). In order for digital Systems Engineering models to be certified as authoritative (credible), they need to be assessed - verified and validated - and with the amount of uncertainty in the model quantified (consider reusing someone else's model without knowing the author). Due to this increasing model complexity, the authors assert that traditional human-based methods for validating, verifying, and uncertainty quantification - such as human-based peer-review sessions - cannot sufficiently establish that a digital Systems Engineering model of a complex system is credible. Digital Systems Engineering models of complex systems can contain millions of nodes and edges. The authors assert that this level of detail is beyond the ability of any group of humans - even working for weeks at a time - to discern and catch every minor model infraction. In contrast, computers are highly effective at discerning infractions with massive amounts of information. The authors suggest that a better approach might be to focus the humans at what model patterns should be assessed and enable the computer to assess the massive details in accordance with those patterns - by running through perhaps 100,000 test loops. In anticipation of future projects to implement and automate the assessment of models at Sandia National Laboratories, a study was initiated to elicit input from a group of 25 Systems Engineering experts. The authors positioning query began with - 'What questions would a Systems Engineer ask to assess Systems Engineering models for credibility?" This report documents the results of that survey.

42 ENGINEERING↗

An overview of 3D field optimization for control of transport and edge instabilities on KSTAR

An international team from several laboratories and universities has made key advances over the last few years in the control of plasma transport and edge instabilities with applied 3D fields in the KSTAR tokamak to optimize long pulse operation scenarios. This overview begins with the optimization of both core and edge resonant magnetic perturbations (RMP) to improve fast ion confinement to avoid excessive limiter heat loads due to fast ion losses and successful modeling of the experimental results. Integrated and advanced plasma control techniques with machine learning (ML) and adaptive control were then used to optimize the 3D field spectrum in real-time to control edge localized modes (ELMs) while avoiding core locked modes that could disrupt the plasma. Accelerating the offline model of 3D fields with a surrogate ML model can optimize ELM suppression in the edge while limiting the impact of the applied RMP fields deeper in the plasma core in real-time. In addition, the impact of the 3D fields on the divertor heat load has been modeled and compared with experimental measurements. An analysis of a multi-machine database including KSTAR has been performed to better understand the metrics for the observed RMP thresholds for ELM suppression and the resulting plasma performance. Predictive modeling of the operational space for ELM suppression and density pumpout due to RMP has shown the importance of magnetic islands in the plasma edge and their impact on plasma turbulence. This research has culminated in the development of successful long pulse operational scenarios on KSTAR while attempting to overcome challenges of the new tungsten divertor.

3D fields↗

Nonlinear Simulations of Peeling-Ballooning Modes with Anomalous Electron Viscosity and their Role in Edge Localized Mode Crashes

A minimum set of equations based on the peeling-ballooning (P-B) model with nonideal physics effects (diamagnetic drift, ExB drift, resistivity, and anomalous electron viscosity) is found to simulate pedestal collapse when using the new BOUT++ simulation code, developed in part from the original fluid edge code BOUT. Nonlinear simulations of P-B modes demonstrate that the P-B modes trigger magnetic reconnection, which leads to the pedestal collapse. With the addition of a model of the anomalous electron viscosity under the assumption that the electron viscosity is comparable to the anomalous electron thermal diffusivity, it is found from simulations using a realistic high-Lundquist number that the pedestal collapse is limited to the edge region and the edge localized mode (ELM) size is about 5%-10% of the pedestal stored energy. This is consistent with many observations of large ELMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nucleation and growth of rolling contact failure of 440C bearing steel

A 'two-body' elasto-plastic finite element model of 2-dimensional rolling and rolling-plus-sliding was developed to treat the effect of surface irregularities. The model consists of a smooth cylinder in contact with a semi-infinite half-space that is either smooth or fitted with one of 0.4 microns deep or 7 microns deep groove, or a 0.4 microns high ridge-like asperity. The model incorporates elastic-linear-kinematic hardening-plastic (ELKP) and non-linear-kinematic hardening-plastic (NLKP) material constitutive relations appropriate for hardened bearing steel and the 440C grade. The calculated contact pressure distribution is Hertzian for smooth body contact, and it displays intense, stationary, pressure spikes superposed on the Hertzian pressure for contact with the grooved and ridged surface. The results obtained for the 0.4 microns deep groove compare well with those reported by Elsharkawy and Hamrock for an EHD lubricated contact. The effect of translating the counterface on the half space as opposed to indenting the half space with the counter face with no translation is studied. The stress and strain values near the surface are found to be similar for the two cases, whereas they are significantly different in the subsurface. It is seen that when tiny shoulders are introduced at the edge of the groove in the finite element model, the incremental plasticity and residual stresses are significantly higher in the vicinity of the right shoulder (rolling direction is from left to right) than at the left shoulder. This may explain the experimental observation that the spall nucleation occurs at the exit end of the artificially planted indents. Pure rolling calculations are compared with rolling + sliding calculations. For a coefficient of friction, mu = 0.1, the effect of friction is found to be small. Efforts were made to identify the material constitutive relations which best describe the deformation characteristics of the bearing steels in the initial few cycles. Elastic-linear-kinematic hardening-plastic (ELKP) material constitutive relations produce less net plastic deformation in the initial stages for a given stress, than seen in experiments. A new set of constitutive relations: non-linear-kinematic hardening-plastic (NLKP) was used. This material model produces more plasticity than the ELKP model and shows promise for treating the net distortions in the early stages. Techniques for performing experimental measurements that can be compared with the finite element calculations were devised. The measurements are being performed on 9mm-diameter, 440C steel cylindrical rolling elements in contact with 12.5 mm-diameter, 52100 steel balls in a 3-ball-rod fatigue test machine operating at 3600 RPM. Artificial, 7 microns deep, indents were inserted on the running track of the cylindrical rolling elements and profilometer measurements of these indents made, before and after the rolling. These preliminary measurements show that the indents are substantially deformed plastically in the process of rolling. The deformations of the groove calculated with the finite element model are comparable to those measured experimentally.

Gupta, V.↗

EXEP: Catching the rays- modeling the stray light background of a starshade.

Diffraction and reflection from the optical edges is the dominant source of stray light from a starshade. However, recent progress in optical edge design has led to much reduced predictions of stray light deriving from this source. Secondary sources now also play a role; these sources arise from two or more reflections from the starshade structure. These multiple reflections allow light to reach the telescope from parts of the structure that are shaded from direct sunlight. Here we analyze the secondary sources for the starshade model developed as part of the NASA’s S5 starshade technology development and show the effects of optical edge mechanical design variants and mitigations.

Stegman, Matthew↗

The use of a Navier-Stokes code in the wing design process

The feasibility was determined of incorporating the Navier-Stokes computational code, CFL3D, into the supersonic wing design process. The approach taken is of two steps. The first step was to calibrate CFL3D against existing experimental data sets obtained on thin sharp edged delta wings. The experimental data identified six flow types which are dependent on the similarity parameters of Mach number and angle of attack normal to the leading edge. The calibration showed CFL3D capable of simulating these various separated and attached flow conditions. The second step was to use CFL3D to study the initial formation of leading edge separation over delta wings at supersonic speeds. This consisted of examining solutions obtained on a 65 deg delta wing at Mach number of 1.6 with varying cross sectional shapes. Reynolds number was held constant at 1000000 and the Baldwin-Lomax turbulence model was used. The study showed that through the use of leading edge radius and/or camber, the onset of leading edge separation can be delayed to a higher angle of attack than observed on a flat sharp edged wing. Based on the geometries studied, three wind tunnel models are being designed to verify these results.

Mcmillin, S. Naomi↗

Final technical report

This final report covers the final year of the project. Reports from previous years were included in the group report for that year. The objective of this part of the project was to compare results from two large-scale, nonlinear plasma simulation codes based on magnetohydrodynamics, M3D and M3D-C1, for plasma edge instabilities. This is a difficult undertaking and the comparison was only partially successful because, while the MHD equations are standard, there are a number of valid MHD models of the plasma dissipation that make different approximations to their physics and the numerical implementation of a given model can be quite different depending on the way that the rest of the equations are solved. Large differences arise, and have major effects on the predicted plasma behavior, in the case of the greatest interest to this project, the plasma edge region under conditions where the plasma edge instabilities are strongest and the background plasma changes abruptly from interior hot, dense conditions to an unconfined, cool, diffuse plasma outside the magnetic boundary surface. Experimental observations only partially measure the background plasma and there are many non-MHD processes that can have important effects (studied in the rest of the project). Comparisons for edge instabilities at very small amplitude, the so-called linear modes, had showed good agreement for a few interior plasma instabilities, but strong differences between the default models for the plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tungsten dust impact on ITER-like plasma edge

The impact of tungsten dust originating from divertor plates on the performance of edge plasma in ITER-like discharge is evaluated using computer modeling with the coupled dust-plasma transport code DUSTT-UEDGE. Different dust injection parameters, including dust size and mass injection rates, are surveyed. It is found that tungsten dust injection with rates as low as a few mg/s can lead to dangerously high tungsten impurity concentrations in the plasma core. Dust injections with rates of a few tens of mg/s are shown to have a significant effect on edge plasma parameters and dynamics in ITER scale tokamaks. The large impact of certain phenomena, such as dust shielding by an ablation cloud and the thermal force on tungsten ions, on dust/impurity transport in edge plasma and consequently on core tungsten contamination level is demonstrated. It is also found that high-Z impurities provided by dust can induce macroscopic self-sustained plasma oscillations in plasma edge leading to large temporal variations of edge plasma parameters and heat load to divertor target plates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Airborne hyperspectral imaging of cover crops through radiative transfer process-guided machine learning

Cover cropping between cash crop growing seasons is a multifunctional conservation practice. Timely and accurate monitoring of cover crop traits, notably aboveground biomass and nutrient content, is beneficial to agricultural stakeholders to improve management and understand outcomes. Currently, there is a scarcity of spatially and temporally resolved information for assessing cover crop growth. Remote sensing has a high potential to fill this need, but conventional empirical regression operated with coarse-resolution multispectral data has large uncertainties. Therefore, this study utilized airborne hyperspectral imaging techniques and developed new process-guided machine learning approaches (PGML) for cover crop monitoring. Specifically, we deployed an airborne hyperspectral system covering visible to shortwave-infrared wavelengths (400–2400 nm) to acquire high spatial (0.5 m) and spectral (3–5 nm) resolution reflectance over 23 cover crop fields across Central Illinois in March and April of 2021. Airborne hyperspectral surface reflectance with high spectral and spatial resolution can be well matched with field data to quantify cover crop traits. Furthermore, the PGML models were pre-trained by synthetic data from soil-vegetation radiative transfer modeling (one million records), and then fine-tuned with field data of cover crop biomass and nutrient content. Results show that airborne hyperspectral data with PGML can achieve high accuracy to predict cover crop aboveground biomass (R 2 = 0.72, relative RMSE = 15.16%) and nitrogen content (R 2 = 0.69, relative RMSE = 16.59%) through leave-one-field-out cross-validation. Unlike the pure data-driven approach (e.g., partial least-squares regression), PGML incorporated radiative transfer knowledge and obtained higher predictive performance with fewer field data. Meanwhile, with field data for model fine-tuning, PGML predicted biomass more accurately than the inversion of radiative transfer models. Here we also found that the red edge has a high contribution in quantifying aboveground biomass and nitrogen content, followed by green and shortwave spectra. This study demonstrated the first attempt of utilizing hyperspectral remote sensing to accurately quantify cover crop traits. We highlight the strength of PGML in exploiting sensing data to quantify ecosystem variables to advance agroecosystem monitoring for sustainable agricultural management.

60 APPLIED LIFE SCIENCES↗

The Peak Absorbance Wavelength of Photosynthetic Pigments Around Other Stars From Spectral Optimization

In the search for life on other planets, the presence of photosynthetic surface vegetation may be detectable from the colors of light it reflects, which on the modern Earth is a steep increase in reflectance between the red and near-infrared wavelengths, a “red edge.” This edge-like signature occurs at wavelengths of peak photon absorbance, which are the result of adaptations of the phototroph to their spectral environment. On planets orbiting different stellar types, red edge analogs may occur at other colors than red. Thus, knowing the wavelengths at which photosynthetic organisms preferentially absorb and reflect photons is necessary to detect red edge analogs on other planets. Using a numerical model that predicts the absorbance spectrum of extant photosynthetic pigments on Earth from Marosvolgyi & van Gorkom (2010), we calculate the absorbance spectrum for pigments on an Earth-like planet around F through late M type stars that are adapted for maximal energy production. In this model, cellular energy production is maximized when pigments are tuned to absorb at the wavelength that maximizes energy input from incident photons while minimizing energy losses due to thermal emission and building cellular photosynthetic apparatus. We find that peak photon absorption for photosynthetic organisms around F type stars tends to be in the blue while for G, K, and early M type stars, red or just beyond is preferred. Around the coolest M type stars, these organisms may preferentially absorb in the near-infrared, possibly past 1 micron. These predictions are consistent with previous, qualitative estimates of pigment absorptance. Our predicted absorbance spectra for photosynthetic surface organisms depend on both the stellar type and planetary atmospheric composition, especially atmospheric water vapor concentrations, which alter the availability of surface photons and thus the predicted pigment absorption. By constraining the absorbance spectra of alien, photosynthetic organisms, future observations may be better equipped to detect the weak spectral signal of red edge analogs.

astrobiology↗

Topological edge modes without symmetry in quasiperiodically driven spin chains

Here we construct an example of a 1d quasiperiodically driven spin chain whose edge states can coherently store quantum information, protected by a combination of localization, dynamics, and topology. In a sharp departure from topological phases in static and periodically driven (Floquet) spin chains, this model does not rely upon microscopic symmetry protection: Instead, the edge states are protected purely by emergent dynamical symmetries. We explore the dynamical signatures of this emergent dynamical symmetry-protected topological (EDSPT) order through exact numerics, time evolving block decimation, and analytic high-frequency expansion, finding evidence that the EDSPT is a stable dynamical phase protected by bulk many-body localization up to (at least) stretched-exponentially long timescales, and possibly beyond. We argue that EDSPTs are special to the quasiperiodically driven setting, and cannot arise in Floquet systems. Moreover, we find evidence of a type of boundary critical with no known static or Floquet analogue, in which the edge spin dynamics transition from quasiperiodic to chaotic, leading to bulk thermalization.

36 MATERIALS SCIENCE↗

Enhancing grid reliability and resilience through novel DER control, total situational awareness and integrated distribution-transmission representation

High penetration of distributed energy resources (DERs) can lead to overvoltage and thermal violations, miscoordination of protection devices and potential adverse control interactions. The challenges are exacerbated by a lack of operator situational awareness of behind-the-meter DERs, and T&D interactions. Furthermore, the large attack surface of a DER environment creates significant cyber security challenges. The motivation is to address these barriers. The main goal is to enable extreme levels of DERs in distribution systems while simultaneously enhancing their reliability and resiliency. This is achieved by a data-driven approach for operation, planning and control of distribution systems with total situational awareness and real-time DER control enabled by a network of edge intelligent devices, a cloud-based analytical platform, and secure communications.

14 SOLAR ENERGY↗

Effect of slot width on transition and noise attenuation of a flat sound shield in a Mach 6 wind tunnel

An experimental and theoretical study of a sound shield concept to attenuate the noise radiated into the test section from the turbulent boundary layer on the walls of wind tunnels was conducted. The model investigated was planar with a sharp flat plate leading edge faired into an array of rods aligned nearly parallel to the local flow. For a ratio of gap diameter to rod diameter of 0.16, the flow was laminar over the entire model at a maximum local length Reynolds number of 14 million. A 45% reduction in the tunnel free stream root mean square pressure level was measured within the shielded region for this gap width when the boundary layers on the rods were laminar. Smaller ratios of gap diameter to rod diameter resulted in substantial reductions in the transition Reynolds number, and in a 40% pressure reduction.

Stainback, P. C.↗

The interaction of edge dislocations with hydrogen-helium bubbles in tungsten

In fusion reactors, plasmas-facing components undergo degradation due to displacement damage and injection of gas impurities. Significant amounts of hydrogen (H) and helium (He) impurities can be introduced into materials through plasma exposure and nuclear transmutation, and their synergistic effects lead to the formation of mixed He/H bubbles under irradiation, changing their hardening mechanisms. In this study, molecular dynamics (MD) models were developed to study the interaction between ½<111> edge dislocations with mixed He/H-bubbles in W. The critical resolved shear stress (CRSS) that is required for dislocation breakaway increases with He/H-to-vacancy ratio at 600 K, indicating strong pinning effects of mixed He/H bubbles. However, as the temperature increases up to 1400 K, the mixed He/H bubbles become unstable as the H atoms are increasingly emitted from the mixed He/H bubbles and migrate into W matrix, which lowers bubble pressure and CRSS. Overall, these results highlight the synergistic effects of He and H on dislocation behavior in irradiated W during deformation.

36 - MATERIALS SCIENCE↗

Graph Neural Network for Object Reconstruction in Liquid Argon Time Projection Chambers

The Exa.TrkX project presents a graph neural network (GNN) technique for low-level reconstruction of neutrino interactions in a Liquid Argon Time Projection Chamber (LArTPC). GNNs are still a relatively novel technique, and have shown great promise for similar reconstruction tasks in the Large Hadron Collider (LHC). Graphs describing particle interactions are formed by treating each detector hit as a node, with edges describing the relationships between hits. We utilise a multi-head attention message passing network which performs graph convolutions in order to label each node with a particle type.We present an updated variant of our GNN architecture, with several improvements. After testing the model on more realistic simulation with regions of unresponsive wires, the target was modified from edge classification to node classification in order to increase robustness. Removing edges as a classification target opens up a broader possibility space for edge-forming techniques; we explore the model’s performance across a variety of approaches, such as Delaunay triangulation, kNN, and radius-based methods. We also extend this model to the 3D context, sharing information between detector views. By using reconstructed 3D spacepoints to map detector hits from each wire plane, the model naively constructs 2D representations that are independent yet fully consistent.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗