Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flow path”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Operationally Efficient Propulsion System Study (OEPSS) data book. Volume 1: Generic ground operations data

This study was initiated to identify operations problems and cost drivers for current propulsion systems and to identify technology and design approaches to increase the operational efficiency and reduce operations costs for future propulsion systems. To provide readily usable data for the Advance Launch System (ALS) program, the results of the Operationally Efficient Propulsion System Study (OEPSS) were organized into a series of OEPSS Data Books as follows: Volume 1, Generic Ground Operations Data; Volume 2, Ground Operations Problems; Volume 3, Operations Technology; Volume 4, OEPSS Design Concepts; and Volume 5, OEPSS Final Review Briefing, which summarizes the activities and results of the study. This volume presents ground processing data for a generic LOX/LH2 booster and core propulsion system based on current STS experience. The data presented includes: top logic diagram, process flow, activities bar-chart, loaded timelines, manpower requirements in terms of duration, headcount and skill mix per operations and maintenance instruction (OMI), and critical path tasks and durations.

Byrd, Raymond J.↗

Automating symbolic analysis with CLIPS

Symbolic Analysis is a methodology first applied as an aid in selecting and generating test cases for 'white box' type testing of computer software programs. The feasibility of automating this analysis process has recently been demonstrated through the development of a CLIPS-based prototype tool. Symbolic analysis is based on separating the logic flow diagram of a computer program into its basic elements, and then systematically examining those elements and their relationships to provide a detailed static analysis of the process that those diagrams represent. The basic logic flow diagram elements are flow structure (connections), predicates (decisions), and computations (actions). The symbolic analysis approach supplies a disciplined step-by-step process to identify all executable program paths and produce a truth table that defines the input and output domains for each path identified. The resulting truth table is the tool that allows software test cases to be generated in a comprehensive manner to achieve total program path, input domain, and output domain coverage. Since the manual application of symbolic analysis is extremely labor intensive and is itself error prone, automation of the process is highly desirable. Earlier attempts at automation, utilizing conventional software approaches, had only limited success. This paper briefly describes the automation problems, the symbolic analysis expert's problem solving heuristics, and the implementation of those heuristics as a CLIPS based prototype, and the manual augmentation required. A simple application example is also provided for illustration purposes. The paper concludes with a discussion of implementation experiences, automation limitations, usage experiences, and future development suggestions.

Morris, Keith E.↗

Thermal Modeling of a Dual-Stage Sodium Thermal-Electrochemical Converter (Na-TEC)

The sodium thermal electrochemical converter (Na-TEC) is a heat engine that generates electricity through the isothermal expansion of sodium ions through a beta”-alumina solid-electrolyte. The Na-TEC is a closed system that can theoretically achieve conversion efficiencies above 45% when operating between thermal reservoirs at 1150 K and 550 K. However, thermal designs have confined previous single-stage devices to thermal efficiencies below 20%. To mitigate some of these limitations, we consider dividing the isothermal expansion into two stages; one at the evaporator temperature (1150 K) and another at an intermediate temperature (550 K – 950 K). This dual-stage Na-TEC takes advantage of regeneration and reheating, and could be amenable to better thermal management through a reduction of parasitic losses. These losses are comprised of (i) the heat input that does not participate in power production but simply bypasses the thermo-electrochemical process and is transferred to the condenser, and (ii) heat that is lost from the device directly to the surroundings due to poor insulation. Heat loss to the surroundings occurs from a lower average hot-side temperature given that a fraction of the power conversion occurs at an intermediate stage. Also, the condenser now directly interacts with the lower temperature of the intermediate stage, thereby reducing radiation loss. A simplified geometry is developed for this device to help guide its design from a heat transfer perspective. All thermal contact and boundary conditions are discussed, including the evaporation and condensation of sodium vapor, thermal leakage through the housing, and the thermal contact between the beta”-alumina and the housing. A ray tracing method assuming gray, diffuse surfaces is used to account for the internal radiation heat transfer within the device. Liquid sodium flows in a capillary wick between the condenser and the evaporator with Pe << 1, so only conduction heat transfer is considered within this liquid return path. For simplicity, natural convection between the sodium vapor and the device housing is neglected. A numerical linear resistance model (<5% error when compared to a finite element model) is used to determine the expected conversion temperatures of each stage for a range of candidate materials. Furthermore, a numerical model (<2% error) is developed to find the factor of increase in the thermal resistance for several designs of corrugated features for the device housing. By using an iterative scheme, efficiency vs. power curves are created for a number of material and size combinations. Finally, the fundamental tradeoff between the power and efficiency is explored in conjunction with the total system size.

14 SOLAR ENERGY↗

Ion properties in a Hall current thruster operating at high voltage

Operation of a 5 kW-class Hall current Thruster for various voltages from 400 V to 800 V and a xenon mass flow rate of 6 mg s{sup −1} have been studied with a quasi-neutral hybrid model. In this model, anomalous electron transport is fitted from ion mean velocity measurements, and energy losses due to electron–wall interactions are used as a tuned parameter to match expected electron temperature strength for same class of thruster. Doubly charged ions production has been taken into account and detailed collisions between heavy species included. As the electron temperature increases, the main channel of Xe{sup 2+} ion production becomes stepwise ionization of Xe{sup +} ions. For an applied voltage of 800 V, the mass utilization efficiency is in the range of 0.8–1.1, and the current fraction of doubly charged ions varies between 0.1 and 0.2. Results show that the region of ion production of each species is located at the same place inside the thruster channel. Because collision processes mean free path is larger than the acceleration region, each type of ions experiences same potential drop, and ion energy distributions of singly and doubly charged are very similar.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Paths to circularity for plastics in the United States

In 2019, the United States consumed over 57 million metric tons (MMT) of plastic with less than 7% recovered for reuse. This study provides an updated material flow analysis at national and regional scales for all durable and single-use plastics in the United States. From this material flow analysis, we develop a series of alternative future national plastic flow scenarios that envision a scale-up of recycling technologies, incorporating technical limitations and sorting infrastructure constraints. The results suggest that a maximum of 68% (24 MMT) of plastic waste could be diverted from landfills by scaling up existing commercial recycling technologies. Based on the current technological landscape, reaching near-zero waste is only possible if processes that are operating at pilot and laboratory scales can be effectively scaled and coupled with improved sorting infrastructure. Through these scenarios with increased recycling, the availability of postconsumer resin stocks could increase by 22–43 MMT.

36 MATERIALS SCIENCE↗

Future Lunar Geophysical Mission Opportunities Including the Lunar Geophysical Network and CLPS

In the next few years, several opportunities are underway to take new geophysical observations of the Moon including geodetic and seismic. NASA’s novel Commercial Lunar Payload Services (CLPS) program seeks to acquire delivery services from 14 US companies. Nine funded task orders have been selected with payloads from multiple disciplines. Here we review the upcoming geophysical CLPS payloads and their measurement objectives then we provide a review of the Lunar Geophysical Network mission in development for New Frontiers 5. The Lunar Geophysical Network (LGN) mission is proposed to land on the Moon in the early 2030’s and deploy packages at four locations to enable continuous geophysical measurements for a minimum of 6 and a goal of 10 years. Returning to the lunar surface with a long-lived geophysical network is a key next step to advance lunar and planetary science. LGN will greatly expand our primarily Apollo-based knowledge of the deep lunar interior by identifying and characterizing mantle melt layers, as well as core size and state. To meet the mission objectives, the instrument suite provides complementary seismic, geodetic, heat flow, and electromagnetic (EM) observations. We discuss the network landing site requirements and provide example sites that meet these requirements. Landing sites include the P-5 region within the Procellarum KREEP Terrane (PKT; (lat:15˚; lon:-35˚), Schickard basin (lat:-44.3˚; lon:-55.1˚), Crisium basin (lat:18.5˚; lon:61.8˚), and the farside Korolev basin (lat:-2.4˚; lon:-159.3˚) (Figure 1). Network optimization considers the best locations to observe seismic core phases, e.g., ScS and PKP. Ray path density and proximity to young fault scarps are also analyzed to provide increased opportunities for seismic observations. Geodetic constraints from laser ranging require the LGN to have at least three nearside stations at maximum limb distances. Heat flow and EM measurements should be obtained away from terrane boundaries and from magnetic anomalies at locations representative of global trends. In our recent paper, an in-depth case study is provided for Mare Crisium. We also discuss the consequences for scientific return of less-than-optimal locations or number of stations.

Moons↗

Future Lunar Geophysical Mission Opportunities Including the Lunar Geophysical Network, Artemis and CLPS

In the next few years, several opportunities are underway to take new geophysical observations of the Moon including geodetic and seismic. NASA’s novel Commercial Lunar Payload Services (CLPS) program seeks to acquire delivery services from 14 US companies. Nine funded task orders have been selected with payloads from multiple disciplines. Here we review the upcoming geophysical CLPS payloads and their measurement objectives then we provide a review of the Lunar Geophysical Network mission in development for New Frontiers 5. The Lunar Geophysical Network (LGN) mission is proposed to land on the Moon in the early 2030’s and deploy packages at four locations to enable continuous geophysical measurements for a minimum of 6 and a goal of 10 years. Returning to the lunar surface with a long-lived geophysical network is a key next step to advance lunar and planetary science. LGN will greatly expand our primarily Apollo-based knowledge of the deep lunar interior by identifying and characterizing mantle melt layers, as well as core size and state. To meet the mission objectives, the instrument suite provides complementary seismic, geodetic, heat flow, and electromagnetic (EM) observations. We discuss the network landing site requirements and provide example sites that meet these requirements. Landing sites include the P-5 region within the Procellarum KREEP Terrane (PKT; (lat:15˚; lon:-35˚), Schickard basin (lat:-44.3˚; lon:-55.1˚), Crisium basin (lat:18.5˚; lon:61.8˚), and the farside Korolev basin (lat:-2.4˚; lon:-159.3˚) (Figure 1). Network optimization considers the best locations to observe seismic core phases, e.g., ScS and PKP. Ray path density and proximity to young fault scarps are also analyzed to provide increased opportunities for seismic observations. Geodetic constraints from laser ranging require the LGN to have at least three nearside stations at maximum limb distances. Heat flow and EM measurements should be obtained away from terrane boundaries and from magnetic anomalies at locations representative of global trends. In our recent paper, an in-depth case study is provided for Mare Crisium. We also discuss the consequences for scientific return of less-than-optimal locations or number of stations.

Moons↗

Diagnosing Tropical Divergent Circulations From Satellite-Derived Diabatic Forcing and Variational Integral Constraints

Large-scale divergent circulations are part of the atmospheric dynamic response to diabatic heating from condensation, radiative processes, and surface energy fluxes. Vertical motion and the associated divergent wind is thus intimately tied to the hydrologic cycle and the global beat balance. Despite its importance, the divergent circulation is too small in comparison to the rotational flow to measure directly with any accuracy. Vertical motions are recovered diagnostically from reanalyses and, as such, are subject to shortcomings in model physics, numerics, and data availability. While reanalysis estimates of tropical divergent circulations are much improved over those from the Global Weather Experiment, there are still substantial differences between products from operational centers. This is because these circulations are still forced largely by model physics and only secondarily by observations. In order to produce a refined estimate of tropical divergence and its interannual variability we have used a number of remotely-sensed data sets along with variational constraints to improve upon reanalysis estimates. Among these are: precipitation from SSM/I and GPCP, TOVS Path-A vertical cloud distributions; ISCCP radiative cooling rates; TOA radiative fluxes from ERBS, surface radiative fluxes from the SRB project, and surface latent and sensible flux estimates from SSM/I. The TOVS Path-A data constrain the divergent outflow in precipitating regions to have the same vertical structure as observed cloudiness. Using integral constraints for moisture, heat, and mass balance, we retrieve consistent divergent wind flows. We examine the ability of this type analysis to capture regional details of ENSO related perturbations to the divergent wind and associated tropical energy balance. Precipitation from satellite is found to be the major constraint in supplying this horizontal structure. We also consider the ability of this analysis to quantify integrated (land vs. ocean) fluctuations in the global monsoonal flow and energy balance. This depends, of course, on the error characteristics of the data constraints. Some estimate of these properties and their relative importance is provided.

Robertson, Franklin R.↗

Frequency–wavenumber spectral analysis of spatio-temporal flows

We propose a fully spatio-temporal approach for identifying spatially varying modes of oscillation in fluid dynamics simulation output by means of multitaper frequency–wavenumber spectral analysis. One-dimensional spectrum estimation has proven to be a valuable tool in the analysis of turbulence data applied spatially to determine the rate of energy transport between spatial scales, or temporally to determine frequencies of oscillatory flows. It also allows for the quantitative comparison of flow characteristics between two scenarios using a standard basis. It has the limitation, however, that it neglects coupling between spatial and temporal structures. Two-dimensional frequency–wavenumber spectral analysis allows one to decompose waveforms into standing or travelling variety. The extended higher-dimensional multitaper method proposed here is shown to have improved statistical properties over conventional non-parametric spectral estimators, and is accompanied by confidence intervals which estimate their uncertainty. Multitaper frequency–wavenumber analysis is applied to a canonical benchmark problem, namely, a direct numerical simulation of von Kármán vortex shedding off a square wall-mounted cylinder with two inflow scenarios with matching momentum-thickness Reynolds numbers $Re_{\unicode[STIX]{x1D703}}\approx 1000$ at the obstacle. Frequency–wavenumber analysis of a two-dimensional section of these data reveals that although both the laminar and turbulent inflow scenarios show a turbulent $-5/3$ cascade in wavenumber ( $\unicode[STIX]{x1D708}$ ) and frequency ( $f$ ), the flow characteristics differ in that there is a significantly more prominent discrete harmonic oscillation near $(f,\unicode[STIX]{x1D708})=(0.2,0.21)$ in wavenumber and frequency in the laminar inflow scenario than the turbulent scenario. This frequency–wavenumber pair corresponds to a travelling wave with velocity near one near the centre path of the vortex street.

Geoga, Christopher J. (ORCID:0000000250604799)↗

Thermal Dispersion Within a Porous Medium Near a Solid Wall

The regenerator is a key component to Stirling cycle machine efficiency. Typical regenerators are of sintered fine wires or layers of fine-wire screens. Such porous materials are contained within solid-waH casings. Thermal energy exchange between the regenerator and the casing is important to cycle performance for the matrix and casing would not have the same axial temperature profile in an actual machine. Exchange from one to the other may allow shunting of thermal energy, reducing cycle efficiency. In this paper, temperature profiles within the near-wall region of the matrix are measured and thermal energy transport, termed thermal dispersion, is inferred. The data show how the wall affects thermal transport. Transport normal to the mean flow direction is by conduction within the solid and fluid and by advective transport within the matrix. In the near-wall region, both may be interrupted from their normal in-core pattern. Solid conduction paths are broken and scales of advective transport are damped. An equation is presented which describes this change for a wire screen mesh. The near-wall layer typically acts as an insulating layer. This should be considered in design or analysis. Effective thermal conductivity within the core is uniform. In-core transverse thermal effective conductivity values are compared to direct and indirect measurements reported elsewhere and to 3D numerical simulation results, computed previously and reported elsewhere. The 3-D CFD model is composed of six cylinders in cross flow, staggered in arrangement to match the dimensions and porosity of the matrix used in the experiments. The commercial code FLUENT is used to obtain the flow and thermal fields. The thermal dispersion and effective thermal conductivities for the matrix are computed from the results.

Simon, T.↗

Tropospheric HO determination by FAGE

In the detection of tropospheric HO by laser excited fluorescence, and alternative air-sampling method, named FAGE (Fluorescence Assay with Gas Expansion) was introduced. Here the air is expanded through a nozzle prior to excitation, in order to improve the ratio of the HO signal to the scattered, fluorescent, and photolytic backgrounds. The improvement comes from the differing pressure dependence of the intensities of these four terms, as well as the distinguishability of their temporal waveforms at low pressures when excited by a pulsed laser. HO has been excited by a YAG/dye laser. Other lasers and pumping paths may perform as well or better in this method. With FAGE, chemical modulation of the HO signal was achieved by hydrocarbon addition to the nozzle flow, converting photolytic HO from an interference to a background. Chemical calibration of the instrumental response to external HO was also achieved, by hydrocarbon decay, at HO concentrations within the ambient range.

Hard, T. M.↗

Predictions of wing and pylon forces caused by propeller installation

Replacement of current turbojets by high-efficiency unducted propfans could have the unfortunate side effect of increasing cabin noise, essentially because unsteady-aerodynamic mechanisms are likely to be introduced whereby some of the energy saved may be lost again, to the production of propeller noise and to wing/pylon vibrations coupling to the cabin as a sounding board. The present study estimates theoretically associated harmonic aerodynamic forces for two candidate configurations: a pusher propeller which chops through the mean wake of the pylon supporting it, and in the process generates a blade-rate force driving the structure, and a tractor wing-mounted propeller, whose trailing rotating wake induces an unsteady downwash field generating unsteady wing airloads. Reported predictions of such propfan aerodynamic sources of structure-borne sound, or vibration, could be the basis for devising means for their mechanical isolation, and thus for the effective interruption of the structural noise path into the cabin. Both mechanisms are analyzed taking advantage of the high subsonic Mach number and high reduced frequency of the interaction between the impinging flow and the affected aerodynamic element.

Martinez, Rudolph↗

Airborne Measurements of Nitric Oxide, Nitrogen Dioxide, Ozone, and Total Reactive Nitrogen During the NASA Global Tropospheric Experiment

Fabrication of the University of Michigan Multichannel Chemiluminescence Instrument (UMMCI) was completed in early 1996 and the instrument participated in test flights on the NASA P3B at Wallops Island prior to integration and deployment for the PEM- Tropics A Mission. The UMMCI consists of 4 channels for simultaneous measurements of ozone and NO with the option for measurements of NO2 and NOy (total reactive nitrogen) when converters are placed upstream of the NO channels. Each NO channel consists of a zeroing volume and reaction vessel, while the ozone channel consists of an ozone catalyst (or scrubber) trap that is not in line with the reaction vessel. The detectors in all for channels are Hamamatsu photomultiplier tubes, which are followed by pulse amplifier discriminators on the NO channels and an electrometer on the ozone channel. Schematics of the Detector Module and NOx/03 Probe Insert and Diagrams of the Control and Data System, the Power and Ground System, the Gas Flow System, and the Calibration System Flow are attached. Intercomparisons were conducted with G. Gregory, NASA/Langley, during the test flights (following prior calibration of the ozone generator/calibrators at the Wallops Long-Path Absorption facility). Initial test results appeared to be reasonable, and instrument characterization studies proceeded for the ozone channel and the 3 NO channels until deployment for integration for the PEM-Tropics Mission. Ozone data was obtained for Flights #4, and 6-2 1, and finalized data was submitted to the PEM-Tropics Data Archive and to the Science Team during the April 1997 Data Workshop. Although it initially appeared that the instrument sensitivity varied, subsequent tests showed that this was the fault of a leak in the ozone calibrator. In fact; the instrument sensitivity has not been observed to vary in a large number of tests over the years since the PEM-Tropics mission. We have, therefore, a very high degree of confidence in the O3 data that we submitted. NO data was obtained for all flights except the mission out of Christmas Island and the subsequent return to Hawaii, during which time the NO channels were contaminated with back-flushing pure NO from the O3 channel. The NO channels were found to suffer from a varying artifact (7 - 22 pptv) which made the instrument's results unreliable for the marine boundary layer portions of the missions (where conditions were extremely clean with NO typically < 2 pptv and O3 only 8 ppbv). Nonetheless, the NO values were an upper limit and were quite useful in identifying pollution layers and outflow from the Latin American Continent. NO data was submitted to the archive for all flights during which data was obtained. Ozone data from the P3B was among the results presented in several peer-reviewed publications. Notably, the ozone data supported the first published finding of evidence for the occurrence of aerosol nucleation in the marine boundary layer. As well, the ozone data was utilized in a treatment of the wavenumber spectra of winds, temperature and trace gases and to demonstrate the occurrence of layering as observed by the P3B during PEM-Tropics A . O3 and NO data were used in an assessment of the impact of southern hemispheric biomass burning, and in the role of NOx and O3 in HOx photochemistry during the PEM Tropics A mission. These data, along with other species measured during PEM-Tropics A, have also been employed in the generation of climatologies for tropospheric ozone and its precursors by the PI's research group.

Carroll, Mary Anne↗

NASA Tech Briefs, April 2002

The contents include: 1) Application Briefs; 2) Sneak Preview of Sensors Expo; 3) The Complexity of the Diagnosis Problem; 4) Design Concepts for the ISS TransHab Module; 5) Characteristics of Supercritical Transitional Mixing Layers; 6) Electrometer for Triboelectric Evaluation of Materials; 7) Infrared CO2 Sensor With Built-In Calibration Chambers; 8) Solid-State Potentiometric CO Sensor; 9) Planetary Rover Absolute Heading Detection Using a Sun Sensor; 10) Concept for Utilizing Full Areas of STJ Photodetector Arrays; 11) Development of Cognitive Sensors; 12) Enabling Higher-Voltage Operation of SOl CMOS Transistors; 13) Estimating Antenna-Pointing Errors From Beam Squints; 14) Advanced-Fatigue-Crack-Growth and Fracture- Mechanics Program; 15) Software for Sequencing Spacecraft Actions; 16) Program Distributes and Tracks Organizational Memoranda; 16) Flat Membrane Device for Dehumidification of Air; 17) Inverted Hindle Mount Reduces Sag of a Large, Precise Mirror; 18) Heart-Pump-Outlet/Cannula Coupling; 19) Externally Triggered Microcapsules Release Drugs In Situ; 20) Combinatorial Drug Design Augmented by Information Theory; 21) Multiple-Path-Length Optical Absorbance Cell; 22) Model of a Fluidized Bed Containing a Mixture of Particles; 23) Refractive Secondary Concentrators for Solar Thermal Systems; 24) Cold Flow Calorimeter; 25) Methodology for Tracking Hazards and Predicting Failures; 26) Estimating Heterodyne-Interferometer Polarization Leakage; 27) An Efficient Algorithm for Propagation of Temporal- Constraint Networks; 28) Software for Continuous Replanning During Execution; 29) Surface-Launched Explorers for Reconnaissance/Scouting; 30) Firmware for a Small Motion-Control Processor; 31) Gear Bearings and Gear-Bearing Transmissions; and 32) Linear Dynamometer With Variable Stroke and Frequency.

Source record↗

Benefits Analysis of Wind-Optimal Operations For Trans-Atlantic Flights

North Atlantic Tracks are trans-Atlantic routes across the busiest oceanic airspace in the world. This study analyzes and compares current flight-plan routes to wind-optimal routes for trans-Atlantic flights in terms of aircraft fuel burn, emissions and the associated climate impact. The historical flight track data recorded by EUROCONTROL's Central Flow Management Unit is merged with data from FAA's Enhanced Traffic Management System to provide an accurate flight movement database containing the highest available flight path resolution in both systems. The combined database is adopted for airspace simulation integrated with aircraft fuel burn and emissions models, contrail models, simplified climate response models, and a common climate metric to assess the climate impact of flight routes within the Organized Track System (OTS). The fuel burn and emissions for the tracks in the OTS are compared with the corresponding quantities for the wind-optimized routes to evaluate the potential environmental benefits of flying wind-optimal routes in North Atlantic Airspace. The potential fuel savings and reduction in emissions depend on existing inefficiencies in current flight plans, atmospheric conditions and location of the city-pairs. The potential benefits are scaled by comparing them with actual flight tests that have been conducted since 2010 between a few city-pairs in the transatlantic and trans-pacific region to improve fuel consumption and reduce the environmental impact of aviation.

air traffic optimization↗

Combining complex flow manifold with three dimensional woven lattices as a thermal management unit

The present invention is directed to a manifold for directing cooling fluid and/or gas to a heat exchanger in a flow configuration designed to optimize heat transfer from the heat exchanger. The manifold can take many different forms such as a layered construction with distributed inlet paths, local outlet paths, a central collection changer and a path for fluid removal. The manifold can be formed from a metal, plastic, rubber, ceramic, or other heat resistant material known to or conceivable by one of skill in the art. The manifold can also be combined with any type of heat exchanger known to or conceivable by one of skill in the art to form a thermal management unit. To optimize overall properties such as low pressure drop, high heat transfer, and excellent temperature uniformity of the thermal management unit, the manifold can be graded, expanded and scaled as needed.

Hemker, Kevin J.↗