Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multiple Errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Kalman Filter for Mass Property and Thrust Identification (MMS)

The Magnetospheric Multiscale (MMS) mission consists of four identically instrumented, spin-stabilized observatories, elliptically orbiting the Earth in a tetrahedron formation. For the operational success of the mission, on-board systems must be able to deliver high-precision orbital adjustment maneuvers. On MMS, this is accomplished using feedback from on-board star sensors in tandem with accelerometers whose measurements are dynamically corrected for errors associated with a spinning platform. In order to determine the required corrections to the measured acceleration, precise estimates of attitude, rate, and mass-properties is necessary. To this end, both an on-board and ground-based Multiplicative Extended Kalman Filter (MEKF) were formulated and implemented in order to estimate the dynamic and quasi-static properties of the spacecraft.

Maneuver and Attitude Dynamics↗

Use of an Internal Mercury-Argon Lamp for the Calibration of Raman Frequency in Large Raman Images of Astromaterials

Raman imaging is an emerging tool for the analysis of meteorites, as it is capable of describing mineralogy, carbon composition/speciation, and crystal orientation all within a petrographic context. Adequately examining the heterogeneous composition of a meteorite, while maintaining low laser powers needed to prevent damage to meteorite mineralogy and organics, often requires the collection of large Raman images with long collection times on the timescale of days. However, the frequency calibration of the Raman instrument/spectrometer drifts on long timescales resulting in low frequency precision for the Raman spectra comprising a large Raman image. This decrease in frequency precision can compromise the analysis of geological markers that can provide important information on a meteorite sample. We examine, in detail, the change in bandwidth and frequency of the Raman bands and Hg-Ar emission lines in our Raman images as a function of time and laboratory temperature. To overcome the drift in calibration, we utilize a commercial WITec Raman instrument with an internal Hg-Ar calibration lamp to individually calibrate each spectrum in the Raman image. Our instrument, known as “Ratatoskr”, uses a beam splitter in place of the customary mirror to facilitate collection of Hg-Ar calibration lines concurrent with Raman spectra. We show that using the internal calibration we can improve the frequency precision for the spectra in our Raman images from ~±0.15 cm(exp -1) to ~±0.05 cm(exp -1) for Raman spectra collected over multiple days. This is important as it improves measurements of mineral chemistry, latent strain, and other features that are dependent upon accurate peak position determination. We also examine the spectral signal-to-noise ratio needed to minimize the frequency error when fitting bands to Gaussian/Lorentzian profiles. We then use our results to suggest a general method for calibrating the frequency of Raman spectra in large Raman images.

Jakubek, Ryan S.↗

Short Circuiting the Controller – Missteps in Maintenance and Inspection of Process and Wiring in STS-93

The primary objective of the Space Transportation System mission 93 (STS-93) was to deploy the Chandra X-Ray Observatory. Chandra, the world's most powerful X-Ray telescope, allowed scientists from around the world to study some of the most distant and dynamic objects in the universe. Stripped of nearly 7,000 pounds of its own gear to make room for the payload, the orbiter assigned to this mission was Space Shuttle Columbia. Prior to STS-93, Columbia had flown 25 flights and was NASA's oldest and heaviest orbiter. On July 23, 1999, after two prior launch scrubs, Eileen Collins and her crew of four launched from Kennedy Space Center. About five seconds after launch, Mission Control at Johnson Space Center detected a voltage drop on one of Columbia's electrical buses. As a result of this power fluctuation, a primary and back-up Main Engine controller dropped offline. Given design redundancy, the two remaining controllers supported all three engines. If there had been any other AC bus issues, one engine of the three on the Orbiter would have shut down. The redundant set of digital computer units in each engine controller saved Columbia and her crew from a very risky contingency abort. Post-flight inspection revealed soot on a screw head and a hole in an adjacent Kapton insulated wire. The single strand of polyimide wire was located nearly half-way down the payload bay. The Shuttle Independent Assessment Team (SIAT) reported that the wire had rubbed and chaffed against a burred screw head. The burr was later determined to be the result of overtightening of the screw by a technician during a maintenance refurbishment. Alone, the burr may not have been problematic, but later, during another ground processing event, possibly years after, someone inadvertently stepped on the wiring harness. With the pressure and motion of unintended contact, some of the Kapton insulation rubbed off against the burred screw head. The SIAT suspected the wire damage was pre-existing and was caused 4 or 5 years prior to the flight. Finally, the intense vibrations during the launch sequence allowed contact between the exposed conductor and exposed metal area on the burred screw head, resulting in the arcing and shorting of the wire. Due to the quick turnaround times of Space Shuttle Orbiters, wiring issues caused from multiple maintenance events were often overlooked. Additionally, failing to incorporate thorough and early inclusion of human systems integration (HSI) applications as a crucial part of the decision process can result in these types of misshaps. In order to reduce human error associated with integrated manufacturing, maintenance, refurbishment and flight preparations, wire inspection criteria should be refined and standardized, visual inspection processes should be quantified, and technicians should be certified by specially trained instructors. This case, among many others, unveils why human error management and development of safety metrics is a vital piece in the development of complex systems, and why it should be supported aggressively and implemented program wide.

Human Systems Integration↗

Compact Midwave Imaging System: Results from an Airborne Demonstration

The Compact Midwave Imaging System (CMIS) is a wide field of view, multi-angle, multi-spectral push frame imager that relies on the forward motion of the satellite to create a two-dimensional (2D) image swath. An airborne demonstration of CMIS was successfully completed in January-February 2021 on the NASA Langley Research Center Gulfstream III. The primary objective of the four-flight campaign was to demonstrate the capability of this unique instrument to perform stereo observations of clouds and other particulates (e.g. smoke) in the atmosphere. It is shown that the midwave infrared (MWIR) spectral bands of CMIS provide a unique 24/7 capability with high resolution for accurate stereo sensing.The instrument relies on new focal plane array (FPA) technology, which provides excellent sensitivity at much warmer detector temperatures than traditional technologies. This capability enabled a compact, low-cost design that can provide atmospheric motion vectors and cloud heights to support requirements for atmospheric winds in the 2017-2027 Earth Science Decadal Survey. Applications include day/night observations of the planetary boundary layer, severe weather, and wildfires. A comparison with current space-based earth science instruments demonstrates that the SWIR/MWIR multi-spectral capability of CMIS is competitive with larger, more expensive instrumentation. Imagery obtained over a controlled burn and operating nuclear power plant demonstrated the sensitivity of the instrument to temperature variations. The system relies on a mature stereoscopic imaging technique applied to the same scene from two independent platforms to unambiguously retrieve atmospheric motion vectors (AMVs) with accurate height assignment.This capability has been successfully applied to geostationary and low-earth orbit satellites to achieve excellent accuracy. When applied to a ground-point validation case, the accuracy for the CMIS aircraft observations was 20 m and 0.3 m/s for cloud heights and motion vectors, respectively. This result was confirmed by a detailed error analysis with analytical and covariance models. The results for CMIS cases with under flights of Aeolus, CALIPSO and Aqua provided a good validation of expected accuracies. The paper also showed the feasibility of accommodating CMIS on CubeSats to enable multiple instruments to be flown in a leader-follower mode.

stereo winds↗

Method for fabricating a microelectromechanical resonator

A method is disclosed which calculates dimensions for a MEM resonator in terms of integer multiples of a grid width G for reticles used to fabricate the resonator, including an actual sub-width L.sub.a=NG and an effective electrode width W.sub.e=MG where N and M are integers which minimize a frequency error f.sub.e=f.sub.d-f.sub.a between a desired resonant frequency f.sub.d and an actual resonant frequency f.sub.a. The method can also be used to calculate an overall width W.sub.o for the MEM resonator, and an effective electrode length L.sub.e which provides a desired motional impedance for the MEM resonator. The MEM resonator can then be fabricated using these values for L.sub.a, W.sub.e, W.sub.o and L.sub.e. The method can also be applied to a number j of MEM resonators formed on a common substrate.

42 ENGINEERING↗

A Simple Tool for the Design and Analysis of Multiple-Reflector Antennas in a Multi-Disciplinary Environment

The process of designing and analyzing a multiple-reflector system has traditionally been time-intensive, requiring large amounts of both computational and human time. At many frequencies, a discrete approximation of the radiation integral may be used to model the system. The code which implements this physical optics (PO) algorithm was developed at the Jet Propulsion Laboratory. It analyzes systems of antennas in pairs, and for each pair, the analysis can be computationally time-consuming. Additionally, the antennas must be described using a local coordinate system for each antenna, which makes it difficult to integrate the design into a multi-disciplinary framework in which there is traditionally one global coordinate system, even before considering deforming the antenna as prescribed by external structural and/or thermal factors. Finally, setting up the code to correctly analyze all the antenna pairs in the system can take a fair amount of time, and introduces possible human error. The use of parallel computing to reduce the computational time required for the analysis of a given pair of antennas has been previously discussed. This paper focuses on the other problems mentioned above. It will present a methodology and examples of use of an automated tool that performs the analysis of a complete multiple-reflector system in an integrated multi-disciplinary environment (including CAD modeling, and structural and thermal analysis) at the click of a button. This tool, named MOD Tool (Millimeter-wave Optics Design Tool), has been designed and implemented as a distributed tool, with a client that runs almost identically on Unix, Mac, and Windows platforms, and a server that runs primarily on a Unix workstation and can interact with parallel supercomputers with simple instruction from the user interacting with the client.

Katz, Daniel S.↗

Advanced Visualization of Silent Error Propagation in HPC Applications

Last year, we refactored the major components of the SpotSDC visualization platform and added a visualization component for fault tolerance boundary. Also, we designed a new analysis framework to understand an application resiliency with a significantly less amount of samples compared to previous approaches. We evaluated the visualization platform and analysis framework for multiple critical HPC computation kernels and collected evidence for the effectiveness of the method developed.

97 MATHEMATICS AND COMPUTING↗

A rapid method for obtaining frequency-response functions for multiple input photogrammetric data

A two-digital-camera photogrammetric technique for measuring the motion of a vibrating spacecraft structure or wing surface and an applicable data-reduction algorithm are presented. The 3D frequency-response functions are obtained by coordinate transformation from averaged cross and autopower spectra derived from the 4D camera coordinates by Fourier transformation. Error sources are investigated analytically, and sample results are shown in graphs.

Kroen, M. L.↗

Controlling excited-state contamination in nucleon matrix elements

We present a detailed analysis of methods to reduce statistical errors and excited-state contamination in the calculation of matrix elements of quark bilinear operators in nucleon states. All the calculations were done on a 2+1-flavor ensemble with lattices of size 32 3 × 64 generated using the rational hybrid Monte Carlo algorithm at 𝑎 = 0.081 fm and with 𝑀 𝜋 = 312 MeV. The statistical precision of the data is improved using the all-mode-averaging method. We compare two methods for reducing excited-state contamination: a variational analysis and a 2-state fit to data at multiple values of the source-sink separation 𝑡 sep . We show that both methods can be tuned to significantly reduce excited-state contamination and discuss their relative advantages and cost effectiveness. Here a detailed analysis of the size of source smearing used in the calculation of quark propagators and the range of values of 𝑡 sep needed to demonstrate convergence of the isovector charges of the nucleon to the 𝑡 sep → ∞ estimates is presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Limitations of traditional tools for beyond design basis external hazard PRA

Probabilistic risk assessment (PRA) is being used increasingly by the nuclear industry for safety during normal operations as well as for the protection against external hazards. Computation of total risk in an external hazard PRA is dependent on hazard assessment, fragility assessment, and systems analysis. A systems analysis for propagation of component fragilities is conducted using event and fault trees. The event and fault trees for an actual power plant can be fairly large in size, which imposes computational challenges. Hence, certain assumptions are employed for computational efficiency. These assumptions typically represent the conditions imposed during the design basis (DB) scenario. The traditional PRA tools based on these assumptions are also widely applied to perform risk assessment in the context of beyond design basis (BDB) scenarios. However, some of these assumptions may not be valid for certain BDB scenarios. In addition, the probability of dependent failures also increases in BDB scenarios due to common cause failures (CCF) which usually results from design modifications, human errors, etc. In this manuscript, a simple and a relatively more complex illustrative examples are used to show the limitation of these assumptions in the numerical quantification of risk for the case of BDB conditions. Case studies with CCF events across multiple fault trees are also presented to illustrate the effect of these assumptions when traditional approach is used in BDB risk assessment. It is shown that the assumptions are valid for the case of DB conditions but may lead to excessively conservative risk estimates in the case of BDB conditions. Finally, a Bayesian network based top-down algorithm is proposed as an alternative tool for accurate numerical quantification of total risk in systems analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Practical Approach to Wave Function Propagation, Hopping Probabilities, and Time Steps in Surface Hopping Calculations

We compare several established approaches for propagating wave functions and calculating hopping probabilities within the fewest switches surface hopping (FSSH) algorithm for difficult cases with many electronic states and many trivial crossings. If only a single time step (Δt c ) is employed, we find that no published approach can accurately capture the dynamics correctly unless Δt c → 0 (which is not computationally feasible). If multiple time steps are employed, for a fixed classical time step (Δt c ), a robust scheme can be found for dynamically choosing quantum time steps (δt q1 and δt q2 ) and calculating hopping probabilities so that one can systematically reduce all errors and achieve maximally efficient accuracy; scattering calculations confirm that one can choose a fairly large classical time step. Furthermore, the robust scheme presented here uses both the “local diabatic” and adiabatic interpolation and thus borrows elements from both the Granucci/Persico and Meek/Levine algorithms. Our findings should be broadly applicable in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal width of barrier region in X/{gamma}-ray Schottky diode detectors based on CdTe and CdZnTe

The spectral distribution of quantum detection efficiency of X- and {gamma}-ray Schottky diodes based on semi-insulating CdTe or Cd{sub 0.9}Zn{sub 0.1}Te crystals is substantiated and obtained in analytical form. It is shown that the width of the space charge region (SCR) of 6-40 {mu}m at zero bias in CdTe (Cd{sub 0.9}Zn{sub 0.1}Te) Schottky diode is optimal for detecting radiation in the photon energy range above 5-10 keV. Based on the Poisson equation, the relationship between the SCR width and the composition of impurities and the degree of their compensation are investigated. It is shown that the presence of deep levels in the bandgap leads to a considerable increase in space charge density and electric field strength near the crystal surface. However, this effect contributes a small error in the determination of the SCR width using the standard formula for the Schottky diode. It is also shown that the concentration of uncompensated impurities in CdTe and Cd{sub 0.9}Zn{sub 0.1}Te crystals within the 4 Multiplication-Sign 10{sup 11}-10{sup 13} cm{sup -3} range is optimal for the detection efficiency of X- and {gamma}-rays in the photon high-energy range. The record-high values of energy resolution have been obtained in the spectra of {sup 241}Am, {sup 57}Co, {sup 133}Ba and {sup 137}Cs isotopes measured using CdTe crystals with Schottky diodes because the concentration of uncompensated donors in the CdTe crystals (1-2) Multiplication-Sign 10{sup 12} cm{sup -3} falls on an interval of maximum detection efficiency. In the spectrum of {sup 57}Co isotope, the limiting energy resolution has been achieved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic orbital-based SOS-MP2 with tensor hypercontraction. I. GPU-based tensor construction and exploiting sparsity

We present a tensor hypercontracted (THC) scaled opposite spin second order Møller-Plesset perturbation theory (SOS-MP2) method. By using THC, we reduce the formal scaling of SOS-MP2 with respect to molecular size from quartic to cubic. We achieve further efficiency by exploiting sparsity in the atomic orbitals and using graphical processing units (GPUs) to accelerate integral construction and matrix multiplication. The practical scaling of GPU-accelerated atomic orbital-based THC-SOS-MP2 calculations is found to be N{sup 2.6} for reference data sets of water clusters and alanine polypeptides containing up to 1600 basis functions. The errors in correlation energy with respect to density-fitting-SOS-MP2 are less than 0.5 kcal/mol for all systems tested (up to 162 atoms).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Permutation invariant polynomial neural network approach to fitting potential energy surfaces. IV. Coupled diabatic potential energy matrices

A machine learning method is proposed for representing the elements of diabatic potential energy matrices (PEMs) with high fidelity. This is an extension of the so-called permutation invariant polynomial-neural network (PIP-NN) method for representing adiabatic potential energy surfaces. While for one-dimensional irreducible representations the diagonal elements of a diabatic PEM are invariant under exchange of identical nuclei in a molecular system, the off-diagonal elements require special symmetry consideration, particularly in the presence of a conical intersection. A multiplicative factor is introduced to take into consideration the particular symmetry properties while maintaining the PIP-NN framework. Here, we demonstrate here that the extended PIP-NN approach is accurate in representing diabatic PEMs, as evidenced by small fitting errors and by the reproduction of absorption spectra and product branching ratios in both H 2 O$(\tilde{X} / \tilde{B})$ and NH 3 $(\tilde{X} $/Ã) non-adiabatic photodissociation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deterministic High-Fidelity Neutronics Simulation of Pebble Bed Reactors Using Pebble Tracking Transport

The pebble tracking transport (PTT) algorithm offers a high-fidelity deterministic approach for neutron transport for pebble bed reactors (PBRs). This approach requires the mesh for the active-core region to consist exclusively of tetrahedral elements, where each node in the pebble-packing region represents a pebble centroid. This paper investigates the application of PTT for full-scale PBRs, considering both the isothermal and the temperature-dependent core conditions. Macroscopic cross sections are generated using Serpent 2 full-core eigenvalue simulations where pebbles are grouped into disjoint subsets using machine learning. To minimize the need for individual cross-section sets for each pebble in the core, K-means clustering is used to group pebbles by temperature and neutronic environment parameters. Here, we compare the multiplication factor and power rate distributions between PTT simulations using the Griffin reactor physics software and reference solutions from Serpent 2. Our analysis shows that a full-core, high-fidelity PTT calculation produces accurate results with minimal local (pebblewise) errors. Additionally, timing results indicate that PTT simulations converge rapidly on modern supercomputing platforms.

Griffin↗

Impact of a counter-rotating planetary rotation system on thin-film thickness and uniformity

Planetary rotation systems incorporating forward- and counter-rotating planets are used as a means of increasing coating-system capacity for large oblong substrates. Comparisons of planetary motion for the two types of rotating systems are presented based on point tracking for multiple revolutions, as well as comparisons of quantitative thickness and uniformity. Counter-rotation system geometry is shown to result in differences in thin-film thickness relative to standard planetary rotation for precision optical coatings. As a result, this systematic error in thin-film thickness will reduce deposition yields for sensitive coating designs.

36 MATERIALS SCIENCE↗

Revisiting Multi-Material Composite Structures with Homogenized Composite Properties

Composite structures inherently develop residual stresses during their curing process. Driven predominately by mismatched thermal strains between differing materials or ply orientations, but also affected by curing process phenomena like polymer shrinkage, these residual stresses can lead to failure within composite structures. There are several methods varying in complexity that can be used to model the development of residual stresses, all of which are capable of capturing sufficient detail to understand the residual stress state at the ply level. However, explicitly modeling all plies of a layup in a composite structure can be prohibitively expensive based on the number of plies, structure size, and required element size. The computational cost can be reduced through the homogenization of the composite layup without losing much fidelity of the overall response of the structure. The homogenization process reduces the many plies of a laminate to a single lamina that reduces complexity and increases the mesh size where a single element can span multiple plies. This report focuses on verification and validation efforts for a homogenization process using a suite of finite element simulations rather than an analytic solution derived from classical laminate theory. Initial verification using representative element volumes indicated there was minimal error in the homogenization process; however, this compounded to a small, but acceptable error in strip and split ring experimental composite structures. The error does under predict the residual stress state in the strip and split ring and should be accounted for when simulating composite structures with homogenized properties.

36 MATERIALS SCIENCE↗

Understanding Dynamics and Thermodynamics of ENSO and Its Complexity Simulated by E3SM and Other Climate Models

Despite the seeming success of most state-of-the-art climate models in simulating the El Niño-Southern Oscillation (ENSO), there is strong evidence that models achieve realistic levels of ENSO activity do so often for wrong reasons. This is owing to an often occurred near cancelation of large errors in terms of contributions to ENSO growth rate from coupled dynamic and thermodynamic feedback processes. Climate models remain deficient in simulating the observed ENSO’s spatial and temporal complexity that involves interplays of coupled dynamic and thermodynamic feedbacks, interactions across multiple scales, nonlinear processes in the tropical atmosphere and ocean system, biases in mean sate and physical processes, and influences external to equatorial Pacific coupled ENSO dynamics. Our proposed research aims at advancing predictive and process-level understandings of ENSO simulated in E3SM and other climate models under current and future climate conditions with two main objectives: (i) better understanding the aforementioned broad range interactive processes and sources that control fundamental properties of ENSO in E3SM and CIMP6 outputs as well as in observational (reanalysis) data sets, using a hierarchical of coupled dynamical frameworks consisting of theoretical analysis, intermediate complexity modeling, and coupled dynamic diagnostics; (ii) to use this understanding to explore pathways towards improving E3SM’s capability of simulating ENSO and its complexity. More specifically, we will focus on four main thrusts of research: (1) ENSO’s dynamic and thermodynamic feedbacks; (2) the across-scale interactions of ENSO with annual cycle and MJO/WWB/TIW (Madden Julian Oscillation/Westerly Wind Burst/Tropical Instability Wave) activity; (3) key nonlinear processes of ENSO involving atmospheric convective thresholds, nonlinear ocean dynamic heating, and thermocline outcropping; and (4) the impacts of climate mean-state biases/changes and perturbed physical processes on simulated ENSO and its complexity.

54 ENVIRONMENTAL SCIENCES↗