Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Measurement of coupling resonance driving terms with the AC dipole

Resonance driving terms for linear coupled betatron motion in a synchrotron ring can be determined from corresponding spectral lines of an excited coherent beam motion. An AC dipole is one of instruments to excite such a motion. When a coherent motion is excited with an AC dipole, measured Courant-Snyder parameters and betatron phase advance have apparent modulations, as if there is an additional quadrupole field at the location of the AC dipole. Hence, measurements of these parameters using the AC dipole require a proper interpretation of observed quantities. The situation is similar in measurements of resonance driving terms using the AC dipole. In this note, we derive an expression of coupled betatron motion excited with two AC dipoles in presence of skew quadrupole fields, discuss an impact of this quadrupole like effect of the AC dipole on a measurement of coupling resonance driving terms, and present an analytical method to determine the coupling resonance driving terms from quantities observed using the AC dipole.

43 PARTICLE ACCELERATORS↗

Identification of Selected Areas to Support Federal Clean Energy Goals Using Small Modular Reactors

This analysis identifies candidate locations, in a broad sense, where there are high concentrations of federal government agency use of electricity, which are also suitable areas for near-term SMRs. Near-term SMRs are based on light-water reactor (LWR) technology with compact design features that are expected to offer a host of safety, siting, construction, and economic benefits. These smaller plants are ideally suited for small electric grids and for locations that cannot support large reactors, thus providing utilities or government entities with the flexibility to scale power production as demand changes by adding additional power by deploying more modules or reactors in phases. This research project is aimed at providing methodologies, information, and insights to assist the federal government in meeting federal clean energy goals.

Federal Energy Consumption↗

Volumetric Additive Manufacturing of Polymer Structures by Holographically Projected Light Fields

As additive manufacturing technologies proliferate and mature, overcoming some of their process limitations becomes increasingly important for the continued expansion of practical applications. Two such limitations that arise from layer-based fabrication are slow speed and geometric constraints (which include poor surface quality and challenges fabricating span, cantilever, and overhang elements). Moving beyond point-by-point and layer-by-layer approaches, the ability to generate a complex 3D volume as a unit operation has the potential to overcome these limitations. Since holography has been extensively studied as a means for storage and retrieval of 3D geometrical information, this dissertation explores the use of holographically-shaped light fields for producing three-dimensional structures in a “volume at once” approach. Leveraging advances in spatial light modulator (SLM) technology, phase-controlled light fields are projected into photopolymer resin to cure a desired geometry. By overlapping multiple sub-regions of a single light field within the target volume, the successful fabrication of non-periodic complex 3D geometries is demonstrated by single exposures on timescales of seconds. This dissertation presents a complete prototype platform that makes this approach possible, comprising a suitable hardware configuration along with the computational algorithms necessary to calculate and optimize the required optical fields. A study of the photopolymerization kinetics is also carried out, to determine the boundaries of usable process parameters such as resin absorbance and available light intensity. The results indicate that low-absorbing resins containing ~0.1% photoinitiator, illuminated at modest powers (~10-100 mW) may be used to produce full 3D structures from 1-10 second exposures, with volume build rates exceeding 100 cm3/hr, without layering and with no need for a substrate or support material.

36 MATERIALS SCIENCE↗

Formation of Field-reversed-Configuration Plasma with Punctuated-betatron-orbit Electrons

We describe ab initio, self-consistent, 3D, fully electromagnetic numerical simulations of current drive and field-reversed-configuration plasma formation by odd-parity rotating magnetic fields (RMFo). Magnetic-separatrix formation and field reversal are attained from an initial mirror configuration. A population of punctuated-betatron-orbit electrons, generated by the RMFo, carries the majority of the field-normal azimuthal electrical current responsible for field reversal. Appreciable current and plasma pressure exist outside the magnetic separatrix whose shape is modulated by the RMFo phase. The predicted plasma density and electron energy distribution compare favorably with RMFo experiments. __________________________________________________

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advanced Simulation and Optimization Tools for Dynamic Aperture of Non-scaling FFAGs and Accelerators including Modern User Interfaces

With the U.S. experimental effort in HEP largely located at laboratories supporting the operations of large, highly specialized accelerators, colliding beam facilities, and detector facilities, the understanding and prediction of high energy particle accelerators becomes critical to the success, overall, of the DOE HEP program. One area in which small businesses can contribute to the ongoing success of the U.S. program in HEP is through innovations in computer techniques and sophistication in the modeling of high-energy accelerators. Accelerator modeling at these facilities is performed by experts with the product generally highly specific and representative only of in-house accelerators or special-interest accelerator problems. Development of new types of accelerators like FFAGs with their wide choices of parameter modifications, complicated fields, and the simultaneous need to efficiently handle very large emittance beams requires the availability of new simulation environments to assure predictability in operation. In this, ease of use and interfaces are critical to realizing a successful model, or optimization of a new design or working parameters of machines. In Phase I, various core modules for the design and analysis of FFAGs were developed and Graphical User Interfaces (GUI) have been investigated instead of the more general yet less easily manageable console-type output COSY provides.

43 PARTICLE ACCELERATORS↗

Multi-seasonal measurements of the ground-level atmospheric ice-nucleating particle abundance on the North Slope of Alaska

Atmospheric ice-nucleating particles (INPs) are an important subset of aerosol particles that are responsible for the heterogeneous formation of ice crystals. INPs modulate the arctic cloud phase (liquid vs. ice), resulting in implications for radiative feedbacks. The number of arctic INP studies investigating specific INP episodes or sources increased recently. However, existing studies are based on short-duration field data, and long-term datasets are lacking. Continuous, long-term measurements are key to determining the abundance and variability of ambient arctic INPs and constraining aerosol–cloud interactions, e.g., to verify and/or improve simulations of mixed-phase clouds. Here, we present a new long-duration INP dataset from the Arctic: 2 years of predominantly immersion-mode INP concentrations (n INP ) measured continuously at the National Oceanic and Atmospheric Administration's Barrow Atmospheric Baseline Observatory (BRW) on the North Slope of Alaska. A portable ice nucleation experiment chamber (PINE-03), which simulates adiabatic expansion cooling, was used to directly measure the ground-level INP abundance with an approximately 12 min time resolution from October 2021 to December 2023. We document PINE-03 n INP measurements as well as estimated ice nucleation active surface site density (n s ) over a wide range of heterogeneous freezing temperatures from −16 to −31 °C from which we introduce new season-specific parameterizations suitable for modeling mixed-phase clouds. Collocated aerosol and meteorological data were analyzed to assess the correlation between ambient n INP , air mass origin region, and meteorological variability. Our findings suggest (1) very high freezing efficiency of INPs across the measured temperatures (n s ≈ 2×10 8 –10 10 m −2 for −16 to −31 °C), which is a factor of 10–1000 times greater efficiency as compared to that found in the previous mid-latitude INP measurements in fall using the same instrument; (2) surprisingly high n INP (≥ 1 L −1 at −25 °C) for the examined temperatures throughout the year that were not measured by PINE-03 at other sites; and (3) high n INP in spring, possibly related to arctic haze episodes. Relatively low concentrations of aerosol surface area and contrasting high-INP concentrations at BRW relative to mid-latitude sites are the possible reasons for the observed high freezing efficiency.

54 ENVIRONMENTAL SCIENCES↗

Jupiter emission observed near 1 MHz

Emission from Jupiter has been observed by the IMP-6 spacecraft at 19 frequencies between 600 and 9900 kHz covering the period from April 1971 to October 1972. The Jovian bursts were identified in the IMP-6 data through the phase of the observed modulated signal detected from the spinning dipole antenna. Initial data reduction has isolated 177 events over a span of 500 days. These events persisted over a period between 1 and 60 min. Of these events at least 48 occurred during times in which Jupiter emission was being observed at either 16.7 or 22.2 MHz by ground-based instruments of the Goddard Space Flight Center Jupiter monitoring system. Large bursts were detectable from 9900 kHz down to 600 kHz, while smaller bursts ranged down to 1030 kHz.-

Brown, L. W.↗

Saturn radio emission near 1 MHz

Emission from the direction of the planet Saturn was observed by the IMP-6 spacecraft at 15 frequencies between 375 and 2200 kHz during the period April 1971 to October 1972. The Saturnian radio bursts were identified in the IMP-6 data through an analysis of the phase of the observed modulated signal detected from the spinning dipole antenna. Initial data reduction has isolated approximately 12 storms whose occurrence corresponded to times in which the spacecraft had an unobstructed view in the direction of Saturn. These events persisted over periods between one and ten minutes. Over the span of 500 days of data another 10 to 20 Saturnian events may exist, but positive identification is confused by the presence of terrestrial noise as well as a geometric ambiguity with Jupiter. A power spectral analysis of the storm occurrence times indicates a weak periodicity at 10h 30m + or - 5m at some of the observing frequencies. The spectral character of the radiation was found analogous to that of Jupiter.

Brown, L. W.↗

Initial ion composition results from the Isis 2 satellite

Isis 2 satellite carried, among other ionospheric instruments an ion mass spectrometer designed to measure the composition of the ionosphere in the mass range from 1 to 64 amu. The satellite, in a nearly constant 1400-km orbit, was launched on April 1, 1971. Examples of data show a wide variation in ion composition from 99% H(+) at night near the equator to greater than 95% O(+) and N(+) in the daytime poleward of the plasmapause. Both H(+) and He(+) are observed to be streaming outward from the high-latitude regions with velocities of several kilometers per second (the polar wind), determined from phase shifts in roll modulation maximums between light and heavy ion species. During the August 1972 magnetic storm a unique ionosphere developed, consisting of N(+) as the dominant species between 55 and 80 deg invariant latitude (above the plasmapause) and N2(+), NO(+), and O2(+) at the 1000 per cu cm concentration level, whereas these molecular species are usually below the detection limit of 1 ion per cu cm in quiet times at this altitude.

Hoffman, J. H.↗

Spectral behavior of Jupiter near 1 MHz

Emission from Jupiter has been observed by the IMP-6 spacecraft at 25 frequencies between 425 and 9900 kHz covering the period April 1971 to October 1972. The Jovian bursts were identified through the phase of the observed modulated signal detected from the spinning dipole antenna. Approximately 500 days of data have been scanned for Jupiter emissions with a positive detection of at least 382 events. The static spectral behavior of the emission has been investigated and can be divided naturally into three types. Type one (normal) shows a high correlation with earth-based observations and follows the same spectral behavior. These bursts are seldom detected much below 1 MHz. The second type (md-frequency) occurs near or below 1 MHz and shows low and high-frequency cutoffs. The emission peak is near 900 kHz with a 3 db bandwidth of approximately 450 kHz. A third type consists of a complex combination of the previous types.

Brown, L. W.↗

Convolutional code performance in fading channels

The performance of convolutional codes in fading channels typical of the planetary entry channel is examined in detail. Short constraint length codes are considered in conjunction with binary phase-shift-keyed (BPSK) modulation and Viterbi maximum likelihood decoding while for longer constraint length codes we consider sequential decoding utilizing both the Fano and Zigangirov-Jelinek (ZJ) algorithms. For short constraint length codes we are primarily interested in the bit error probability performance parameterized by the fading channel parameters. For longer constraint length codes interest will center on the effect of the fading channel parameters on the computational requirements of both the Fano and ZJ algorithms. In either case the effects of simple block interleaving in combatting the memory of the channel is thoroughly explored. The approach is analytic where possible otherwise resort is made to digital computer simulation.

Modestino, J. W.↗

Possible radio emission from Uranus at 0.5 MHz

Radio emission from the direction of Uranus was detected in data from the radio astronomy experiment on the IMP-6 spacecraft. Previously, emission from the direction of Jupiter and Saturn was observed by the IMP-6 at a number of frequencies near 1 MHz during the period April 1971 to October 1972. These radio bursts were identified in the IMP-6 data through an analysis of the phase of the observed modulated signal detected from the spinning dipole antenna. This technique was applied to the direction of the planet Uranus with possible positive results. Over the approximately 500 days of data, three to six bursts with unique spectral characteristics were found. Identification with Uranus is confused by the likely presence of low level terrestrial and solar emission. The observed events persisted less than three minutes and are strongest in intensity near 0.5 MHz.

Brown, L. W.↗

Single laser beam of spatial coherence from an array of GaAs lasers - Free-running mode

Spatially coherent radiation from a monolithic array of three GaAs lasers in a free-running mode is reported. The lasers, with their mirror faces antireflection coated, are operated in an external optical cavity built of spherical lenses and plane mirrors. The spatially coherent-beam formation makes use of the Fourier-transformation property of the internal lenses. Transverse mode control is accomplished by a spatial filter. The optical cavity is similar to that used for the phase-controlled mode of spatially coherent-beam formation; only the spatial filters are different. In the far field (when restored by an external lens), the intensities of the lasers in the array are concentrated in a single laser beam of spatial coherence, without any grating lobes. The far-field distribution of the laser array in the free-running mode differs significantly from the interference pattern of the phase-controlled mode. The modulation characteristics of the optical waveforms of the two modes are also quite different because modulation is related to the interaction of the spatial filter with the longitudinal modes of the laser array within the optical cavity. The modulation of the optical waveform of the free-running mode is nonperiodic, confirming that the fluctuations of the optical fields of the lasers are random.

Philipp-Rutz, E. M.↗

Convolutional code performance in the Rician fading channel

The performance of short constraint length convolutional codes in conjunction with binary phase-shift keyed (BPSK) modulation and Viterbi maximum likelihood decoding on the classical Rician fading channel is examined in detail. Primary interest is in the bit error probability performance as a function of E sub b/N sub 0 parameterized by the fading channel parameters. Fairly general upper bounds on bit error probability performance in the presence of fading are obtained and compared with simulation results in the two extremes of zero channel memory and infinite channel memory. The efficacy of simple block interleaving in combating the memory of the channel is thoroughly explored. Results include the effects of fading on tracking loop performance and the subsequent impact on overall coded system performance. The approach is analytical where possible; otherwise resort is made to digital computer simulation.

Modestino, J. W.↗