Search NASA⌕ Search

SEARCH · Search NASA

Results for “Predictive modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

ON THE RADIATIVE EFFICIENCIES, EDDINGTON RATIOS, AND DUTY CYCLES OF LUMINOUS HIGH-REDSHIFT QUASARS

We investigate the characteristic radiative efficiency {epsilon}, Eddington ratio {lambda}, and duty cycle P {sub 0} of high-redshift active galactic nuclei (AGNs), drawing on measurements of the AGN luminosity function at z = 3-6 and, especially, on recent measurements of quasar clustering at z = 3-4.5 from the Sloan Digital Sky Survey. The free parameters of our models are {epsilon}, {lambda}, and the normalization, scatter, and redshift evolution of the relation between black hole (BH) mass M {sub BH} and halo virial velocity V{sub vir}. We compute the luminosity function from the implied growth of the BH mass function and the quasar correlation length from the bias of the host halos. We test our adopted formulae for the halo mass function and halo bias against measurements from the large N-body simulation developed by the MICE collaboration. The strong clustering of AGNs observed at z = 3 and, especially, at z = 4 implies that massive BHs reside in rare, massive dark matter halos. Reproducing the observed luminosity function then requires high efficiency {epsilon} and/or low Eddington ratio {lambda}, with a lower limit (based on 2{sigma} agreement with the measured z = 4 correlation length) {epsilon} {approx}> 0.7{lambda}/(1 + 0.7{lambda}), implying {epsilon} {approx}> 0.17 for {lambda}>0.25. Successful models predict high duty cycles, P{sub 0} {approx} 0.2, 0.5, and 0.9 at z = 3.1, 4.5, and 6, respectively, and they require that the fraction of halo baryons locked in the central BH is much larger than the locally observed value. The rapid drop in the abundance of the massive and rare host halos at z > 7 implies a proportionally rapid decline in the number density of luminous quasars, much stronger than simple extrapolations of the z = 3-6 luminosity function would predict. For example, our most successful model predicts that the highest redshift quasar in the sky with true bolometric luminosity L > 10{sup 47.5} erg s{sup -1} should be at z {approx} 7.5, and that all quasars with higher apparent luminosities would have to be magnified by lensing.

79 ASTRONOMY AND ASTROPHYSICS↗

New and comprehensive β - and βp-decay spectroscopy results in the vicinity of Sn100

A decay spectroscopy experiment on proton-rich nuclei in the vicinity of the doubly magic Sn100 was carried out at RIKEN Nishina Center. More than 20 nuclei with 43≤Z≤50 and N≤51, produced by fragmentation reactions were investigated via analyses of β-decay, βp-decay, and subsequent γ-ray data. Owing to higher statistics, the precision on the half-lives of many of the ground states and isomers was improved. β-decay endpoint energies of 11 states in 8 nuclei were measured for the first time, and the corresponding QEC and excitation energies were generally consistent with various mass models. Many β-delayed proton emission branching ratios were measured either for the first time or with higher precision compared to literature values, and some of them differed by more than 2σ. Many of the large discrepancies were associated with nuclei with long-lived isomeric states, highlighting large systematic uncertainties involved in these measurements. Twenty-five new γ rays were observed, and ten new states are proposed with unambiguous excitation energies, spins, and parities. Most of the energies of the excited states were consistent within 300 keV or 20%, whichever was greater, compared to shell model predictions in the proton/neutron (p1/2,g9/2) model space assuming a Sr76 core. A signature of a new (1/2-) isomer in Cd97 with T1/2=0.73(7) s was found, in good agreement with shell model predictions. © 2019 American Physical Society.

60 APPLIED LIFE SCIENCES↗

Structural Basis for Metallic-Like Conductivity in Microbial Nanowires

Direct measurement of multiple physical properties of Geobacter sulfurreducens pili have demonstrated that they possess metallic-like conductivity, but several studies have suggested that metallic-like conductivity is unlikely based on the structures of the G. sulfurreducens pilus predicted from homology models. In order to further evaluate this discrepancy, pili were examined with synchrotron X-ray microdiffraction and rocking-curve X-ray diffraction. Both techniques revealed a periodic 3.2-Å spacing in conductive, wild-type G. sulfurreducens pili that was missing in the nonconductive pili of strain Aro5, which lack key aromatic acids required for conductivity. The intensity of the 3.2-Å peak increased 100-fold when the pH was shifted from 10.5 to 2, corresponding with a previously reported 100-fold increase in pilus conductivity with this pH change. These results suggest a clear structure-function correlation for metallic-like conductivity that can be attributed to overlapping π-orbitals of aromatic amino acids. A homology model of the G. sulfurreducens pilus was constructed with a Pseudomonas aeruginosa pilus model as a template as an alternative to previous models, which were based on a Neisseria gonorrhoeae pilus structure. This alternative model predicted that aromatic amino acids in G. sulfurreducens pili are packed within 3 to 4 Å, consistent with the experimental results. Thus, the predictions of homology modeling are highly sensitive to assumptions inherent in the model construction. Finally, the experimental results reported here further support the concept that the pili of G. sulfurreducens represent a novel class of electronically functional proteins in which aromatic amino acids promote long-distance electron transport.

36 MATERIALS SCIENCE↗

An ecological niche model to predict the geographic distribution of Haemagogus janthinomys, Dyar, 1921 a yellow fever and Mayaro virus vector, in South America

Yellow fever virus (YFV) has a long history of impacting human health in South America. Mayaro virus (MAYV) is an emerging arbovirus of public health concern in the Neotropics and its full impact is yet unknown. Both YFV and MAYV are primarily maintained via a sylvatic transmission cycle but can be opportunistically transmitted to humans by the bites of infected forest dwelling Haemagogus janthinomys Dyar, 1921. To better understand the potential risk of YFV and MAYV transmission to humans, a more detailed understanding of this vector species’ distribution is critical. This study compiled a comprehensive database of 177 unique Hg . janthinomys collection sites retrieved from the published literature, digitized museum specimens and publicly accessible mosquito surveillance data. Covariate analysis was performed to optimize a selection of environmental (topographic and bioclimatic) variables associated with predicting habitat suitability, and species distributions modelled across South America using a maximum entropy (MaxEnt) approach. Our results indicate that suitable habitat for Hg . janthinomys can be found across forested regions of South America including the Atlantic forests and interior Amazon.

60 APPLIED LIFE SCIENCES↗

Partitioning CO 2 fluxes with isotopologue measurements and modeling to understand mechanisms of forest carbon sequestration

1. Objectives This project combines automated in situ observations of the isotopologues of CO 2 with root observations, novel experimental manipulations of belowground processes, and isotope-enabled ecosystem modeling to investigate mechanisms of below- vs. aboveground carbon sequestration at the Harvard Forest Environmental Measurements Site (EMS). The proposed objectives, which have now been largely accomplished, include: A. Partitioning of net ecosystem CO 2 exchange (NEE) into photosynthesis and respiration using long-term continuous observations of the isotopic composition of NEE, and analysis of their dynamics ; B. Investigation of the influence of vegetation phenology on the timing and magnitude of carbon allocated belowground using measurements of root growth and indices of belowground autotrophic vs. heterotrophic respiration (via trenched plots and isotope measurements); C. Testing whether plant allocation of carbon belowground stimulates the microbial decomposition of soil organic matter, using in situ rhizosphere simulation experiments wherein realistic quantities of artificial isotopically-labeled exudates are released into the soil; and D. Synthesis and interpretation of the above data using the Ecosystem Demography Model 2 (ED2). 2. Highlights Accomplishments: • Our isotopic eddy flux record has completed its 5th full year and has been used to independently estimate ecosystem-scale respiration and photosynthesis. • Soil surface chamber isotopic flux measurements were carried out during three growing seasons, in conjunction with a trenching manipulation. Key findings to date (listed by objective): A. Partitioning of Net Ecosystem Exchange: 1. Ecosystem respiration is lower during the day than at night—the first robust evidence of the inhibition of leaf respiration by light (the “Kok effect”) at the ecosystem scale. 2. Because it neglects the Kok effect, the standard NEE partitioning approach overestimates ecosystem photosynthesis (by ~25%) and daytime respiration (by ~100%) in the first half of the growing season at our site, and portrays ecosystem photosynthetic light-use efficiency as declining when in fact it is stable until autumnal senescence. B. Vegetation Phenology and belowground allocation: Findings: 1. Autotrophic respiration (Ra) showed a seasonal pattern, peaking in mid-summer when trees were most active. 2. The effective age of the substrate for belowground respiration is less than 2 weeks. 3. Above and belowground phenology are more synchronous in deciduous hardwood stands than evergreen hemlock stands. 4. The decline in root respiration rates in the fall is related to temperature rather than acclimation of root respiration or substrate limitations. Methodological Issues: 5. The isotopic signatures of autotrophic and heterotrophic respiration are too similar for isotopic partitioning of belowground respiration into these two components at our site—in keeping with the recent findings of Bowling et al. (2015) in a subalpine conifer forest. 6. Artifacts of the trenching method, such as changes in soil moisture and increased carbon substrate from the newly severed roots, are significant and need to be quantified when determining daily to annual estimates of autotrophic and heterotrophic respiration. C. Effects of simulated exudates on priming of microbial decomposition: The stoichiometry of root exudates influences both the amount and the mechanism by which priming occurs. At low C:N, SOC loss is caused by an increase in microbial efficiency. At high C:N, SOC loss is caused by an increase in microbial biomass. D. Modeling with the Ecosystem Demography Model (ED2): 1. Incorporation of 13C tracking to create an isotopically-enabled Ecosystem Demography v2 model (ED2) 2. State-of-the-art parameter optimization methodology developed for improving ED2 model predictions and parameters. 3. Significantly improved model predictions of growth- and maintenance-related carbon fluxes and 13C fluxes

54 ENVIRONMENTAL SCIENCES↗

Partitioning CO2 fluxes with isotopologue measurements and modeling to understand mechanisms of forest carbon sequestration

1. Objectives This project combines automated in situ observations of the isotopologues of CO2 with root observations, novel experimental manipulations of belowground processes, and isotope-enabled ecosystem modeling to investigate mechanisms of below- vs. aboveground carbon sequestration at the Harvard Forest Environmental Measurements Site (EMS). The proposed objectives, which have now been largely accomplished, include: A. Partitioning of net ecosystem CO2 exchange (NEE) into photosynthesis and respiration using long-term continuous observations of the isotopic composition of NEE, and analysis of their dynamics ; B. Investigation of the influence of vegetation phenology on the timing and magnitude of carbon allocated belowground using measurements of root growth and indices of belowground autotrophic vs. heterotrophic respiration (via trenched plots and isotope measurements); C. Testing whether plant allocation of carbon belowground stimulates the microbial decomposition of soil organic matter, using in situ rhizosphere simulation experiments wherein realistic quantities of artificial isotopically-labeled exudates are released into the soil; and D. Synthesis and interpretation of the above data using the Ecosystem Demography Model 2 (ED2). 2. Highlights Accomplishments: • Our isotopic eddy flux record has completed its 5th full year and has been used to independently estimate ecosystem-scale respiration and photosynthesis. • Soil surface chamber isotopic flux measurements were carried out during three growing seasons, in conjunction with a trenching manipulation. Key findings to date (listed by objective): A. Partitioning of Net Ecosystem Exchange: 1. Ecosystem respiration is lower during the day than at night—the first robust evidence of the inhibition of leaf respiration by light (the “Kok effect”) at the ecosystem scale. 2. Because it neglects the Kok effect, the standard NEE partitioning approach overestimates ecosystem photosynthesis (by ~25%) and daytime respiration (by ~100%) in the first half of the growing season at our site, and portrays ecosystem photosynthetic light-use efficiency as declining when in fact it is stable until autumnal senescence. B. Vegetation Phenology and belowground allocation: Findings: 1. Autotrophic respiration (Ra) showed a seasonal pattern, peaking in mid-summer when trees were most active. 2. The effective age of the substrate for belowground respiration is less than 2 weeks. 3. Above and belowground phenology are more synchronous in deciduous hardwood stands than evergreen hemlock stands. 4. The decline in root respiration rates in the fall is related to temperature rather than acclimation of root respiration or substrate limitations. Methodological Issues: 5. The isotopic signatures of autotrophic and heterotrophic respiration are too similar for isotopic partitioning of belowground respiration into these two components at our site—in keeping with the recent findings of Bowling et al. (2015) in a subalpine conifer forest. 6. Artifacts of the trenching method, such as changes in soil moisture and increased carbon substrate from the newly severed roots, are significant and need to be quantified when determining daily to annual estimates of autotrophic and heterotrophic respiration. C. Effects of simulated exudates on priming of microbial decomposition: The stoichiometry of root exudates influences both the amount and the mechanism by which priming occurs. At low C:N, SOC loss is caused by an increase in microbial efficiency. At high C:N, SOC loss is caused by an increase in microbial biomass. D. Modeling with the Ecosystem Demography Model (ED2): 1. Incorporation of 13C tracking to create an isotopically-enabled Ecosystem Demography v2 model (ED2) 2. State-of-the-art parameter optimization methodology developed for improving ED2 model predictions and parameters. 3. Significantly improved model predictions of growth- and maintenance-related carbon fluxes and 13C fluxes

54 ENVIRONMENTAL SCIENCES↗

“Refsdal” meets Popper: Comparing predictions of the re-appearance of the multiply imaged supernova behind MACSJ1149.5+2223

Supernova “Refsdal,” multiply imaged by cluster MACS1149.5+2223, represents a rare opportunity to make a true blind test of model predictions in extragalactic astronomy, on a timescale that is short compared to a human lifetime. In order to take advantage of this event, we produced seven gravitational lens models with five independent methods, based on Hubble Space Telescope (HST) Hubble Frontier Field images, along with extensive spectroscopic follow-up observations by HST, the Very Large and the Keck Telescopes. We compare the model predictions and show that they agree reasonably well with the measured time delays and magnification ratios between the known images, even though these quantities were not used as input. This agreement is encouraging, considering that the models only provide statistical uncertainties, and do not include additional sources of uncertainties such as structure along the line of sight, cosmology, and the mass sheet degeneracy. We then present the model predictions for the other appearances of supernova “Refsdal.” A future image will reach its peak in the first half of 2016, while another image appeared between 1994 and 2004. The past image would have been too faint to be detected in existing archival images. The future image should be approximately one-third as bright as the brightest known image (i.e., H{sub AB}≈25.7 mag at peak and H{sub AB}≈26.7 mag six months before peak), and thus detectable in single-orbit HST images. We will find out soon whether our predictions are correct.

79 ASTRONOMY AND ASTROPHYSICS↗

Phenomenological Model for Prediction of Cation Substitution Distribution and Some Physical Properties in Mn{sup 3+}-Doped Barium Hexaferrite

The magnetic properties of M-type barium ferrite are strongly related to the distribution of Fe{sup 3+} cation within the crystal structure. In this work, we propose a simple phenomenological model to predict the Fe{sup 3+} cation distribution for BaFe{sub 12−x}Mn{sub x}O{sub 19} compounds. From the proposed model, it was possible to estimate physical properties such as the theoretical density, the saturation magnetization, and the anisotropic constant. The obtained results were compared with experimental ones extracted from previous reported papers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamics-guided machine learning model for predicting convective boundary layer height and its multi-site applicability

Accurate estimation of convective boundary layer height (CBLH) is vital for weather, climate, and air quality modeling. Machine learning (ML) shows promise in CBLH prediction, but input parameter selection often lacks physical grounding, limiting generalizability. This study introduces a novel ML framework for CBLH prediction, integrating thermodynamic constraints and the diurnal CBLH cycle as an implicit physical guide. Boundary layer growth is modeled as driven by surface heat fluxes and atmospheric heat absorption represented with the low tropospheric stability, using the diurnal cycle as input and output. TPOT and AutoKeras are employed to select optimal models, validated against Doppler lidar-derived CBLH data, achieving an R 2 of 0.84 across untrained years. Comparisons of eddy covariance (ECOR) and energy balance Bowen ratio (EBBR) flux measurements show the same prediction capability. Models trained on the ARM SGP C1 site with ECOR data and tested at E37 and E39 yield R 2 values of 0.79 and 0.81, respectively, demonstrating their adaptability. The ML model trained with all sites' data slightly enhances the performance compared with ML models trained over single-site data. The interquartile range for predicted CBLH is consistently narrower than that for DL-derived CBLH, reflecting lower variability in predicted CBLH compared to DL-derived CBLH, which is influenced by additional factors, which are not well represented with the model inputs. The model's generalizability across multiple sites at the ARM SGP site demonstrates its potential for transfer to greater distances, offering a scalable approach for enhancing boundary layer parameterization in atmospheric models.

Chu, Yufei [Stony Brook Univ., NY (United States)]↗

Space Weather Modeling and Prediction for Intermediate Time-scales

Much of solar activity within a sunspot cycle occurs as bursts, or 'seasons' of strong activity over several months, separated by periods of much less activity. The most important space weather effects occur during these bursts. Previous modeling and forecasting efforts have focused on time-scales of hours-to-days and decades-to-centuries. The recent discovery of Rossby waves in the Sun, together with recently developed global models of solar MHD Rossby waves and their interactions with differential rotation and spot-producing magnetic fields, reveal the opportunity to simulate and predict the occurrence, strength and location of enhanced activity bursts a few weeks up to several months in advance. We now have a golden opportunity to fill in this gap in time-scales of forecasting space weather. This requires a) continuous observations of solar Rossby waves by various techniques; b) development of coupled nonlinear MHD models that simulate both global Rossby waves and the much smaller spatial scale emergence of new active regions; c) application of advanced data assimilation techniques to couple surface observations to update the model-system to integrate forward in time for creating forecasts months ahead. Then it will be possible to build operational prediction models to meet the needs of customers and stakeholders, including support of future NASA missions, regarding what kind and level of space weather to expect a few weeks to several months ahead.

SMD↗

Pairwise interaction extended point-particle model for a random array of monodisperse spheres

This study introduces a new point-particle force model that attempts to account for the hydrodynamic influence of the neighbouring particles in an Eulerian–Lagrangian simulation. In previous point-particle models the force on a particle depends only on Reynolds number and mean volume fraction. Thus, as long as the mean local volume fraction is the same, the force on different particles will be estimated to be the same, even though the precise arrangement of neighbours can be vastly different. From direct numerical simulation (DNS) it has been observed that in a random arrangement of spheres that were distributed with uniform probability, the particle-to-particle variation in force can be as large as the mean drag. Since the Reynolds number and mean volume fraction of all the particles within the array are the same, the standard models fail to account for the significant particle-to-particle force variation within the random array. Here, we develop a model which can compute the drag and lateral forces on each particle by accounting for the precise location of a few surrounding neighbours. A pairwise interaction is assumed where the perturbation flow induced by each neighbour is considered separately, then the effects of all neighbours are linearly superposed to obtain the total perturbation. Faxén correction is used to quantify the force perturbation due to the presence of the neighbours. The single neighbour perturbations are mapped in the vicinity of a reference sphere and stored as libraries. We test the pairwise interaction extended point-particle (PIEP) model for random arrays at two different volume fractions of $\unicode[STIX]{x1D719}=0.1$ and 0.21 and Reynolds numbers in the range $16.5\leqslant Re\leqslant 170$ . The PIEP model predictions are compared against drag and lift forces obtained from the fully resolved DNS simulations performed using the immersed boundary method. Although not perfect, we observe the PIEP model prediction to correlate much better with the DNS results than the classical mean drag model prediction.

Mechanics↗

Movement Models to Predict Low‐Altitude Flight of Soaring Birds Using Look‐Ahead Environmental Factors

Advances in fine-scale movement modeling of soaring birds can aid efforts to understand and resolve the impacts of anthropogenic activities on such birds. Soaring birds often rely on underlying terrain and low-altitude updrafts to govern their flights at rotor-swept altitudes (≤ 200 m above ground level), which puts them at risk of collision with wind turbines. We developed a data-driven Markov model at 1-s resolution that predicts the fine-scale flight behavior of golden eagles (Aquila chrysaetos) as a function of ecological covariates at the current location as well as those within an eagle's line of sight. We only considered ecological covariates that are readily available in real-time (ground elevation and wind conditions). Latent factors (age, sex, species, behavioral intent, migratory status) were intentionally left out of the model. We calibrated the model using golden eagle telemetry data collected in two different ecoregions of the United States. Given a starting location, the calibrated model simulates multiple stochastic 3D paths to produce a time-explicit and spatially explicit risk map of turbine collisions. We discovered an empirical relation between the rate of change of heading and the orographic updraft conditions within an eagle's line of sight. Our model performed most effectively when predicting predominantly-soaring flights at rotor-swept altitudes during wind conditions in which turbines are likely to be operational. The calibrated model could be used in concert with automated eagle detection and turbine curtailment technologies. Specifically, once an eagle is detected by those systems, our model could then provide accurate predictions of turbines the eagle is likely to interact with in the near term.

17 WIND ENERGY↗

Control of Systems With Slow Actuators Using Time Scale Separation

This paper addresses the problem of controlling a nonlinear plant with a slow actuator using singular perturbation method. For the known plant-actuator cascaded system the proposed scheme achieves tracking of a given reference model with considerably less control demand than would otherwise result when using conventional design techniques. This is the consequence of excluding the small parameter from the actuator dynamics via time scale separation. The resulting tracking error is within the order of this small parameter. For the unknown system the adaptive counterpart is developed based on the prediction model, which is driven towards the reference model by the control design. It is proven that the prediction model tracks the reference model with an error proportional to the small parameter, while the prediction error converges to zero. The resulting closed-loop system with all prediction models and adaptive laws remains stable. The benefits of the approach are demonstrated in simulation studies and compared to conventional control approaches.

Stepanyan, Vehram↗

Evaluation of models to predict insolation on tilted surfaces

An empirical study was performed to evaluate the validity of various insolation models which employ either an isotropic or an anisotropic distribution approximation for sky light when predicting insolation on tilted surfaces. Data sets of measured hourly insolation values were obtained over a 6-month period using pyranometers which received diffuse and total solar radiation on a horizontal plane and total radiation on surfaces tilted toward the equator at 37 degrees and 60 degrees angles above the horizon. Data on the horizontal surfaces were used in the insolation models to predict insolation on the tilted surface; comparisons of measured vs calculated insolation on the tilted surface were examined to test the validity of the sky light approximations. It was found that the Liu-Jordan isotropic distribution model provides a good fit to empirical data under overcast skies but underestimates the amount of solar radiation incident on tilted surfaces under clear and partly cloudy conditions.

Klucher, T. M.↗

Finite element models for predicting crack growth characteristics in composite materials

Two dimensional and quasi-three dimensional, linear elastic finite element models for the prediction of crack growth characteristics, including crack growth direction, in laminated composite materials are presented. Mixed mode crack growth in isotropic materials, unidirectional and laminated composites is considered. The modified crack closure method is used to predict the applied load level for crack extension and two failure theories, modifications of the point stress and the Hashin failure criteria, are proposed to predict the direction of crack extension in composites. Comparisons are made with the Tsai-Wu failure criterion and the Sih strain energy density criterion as well as with experimental results. It is shown that the modified versions of point stress and Hashin criteria compare well with experiment.

Buczek, M. B.↗

Origin of the neutron skin thickness of {sup 208}Pb in nuclear mean-field models

We study whether the neutron skin thickness {Delta}r{sub np} of {sup 208}Pb originates from the bulk or from the surface of the nucleon density distributions, according to the mean-field models of nuclear structure, and find that it depends on the stiffness of the nuclear symmetry energy. The bulk contribution to {Delta}r{sub np} arises from an extended sharp radius of neutrons, whereas the surface contribution arises from different widths of the neutron and proton surfaces. Nuclear models where the symmetry energy is stiff, as typical of relativistic models, predict a bulk contribution in {Delta}r{sub np} of {sup 208}Pb about twice as large as the surface contribution. In contrast, models with a soft symmetry energy like common nonrelativistic models predict that {Delta}r{sub np} of {sup 208}Pb is divided similarly into bulk and surface parts. Indeed, if the symmetry energy is supersoft, the surface contribution becomes dominant. We note that the linear correlation of {Delta}r{sub np} of {sup 208}Pb with the density derivative of the nuclear symmetry energy arises from the bulk part of {Delta}r{sub np}. We also note that most models predict a mixed-type (between halo and skin) neutron distribution for {sup 208}Pb. Although the halo-type limit is actually found in the models with a supersoft symmetry energy, the skin-type limit is not supported by any mean-field model. Finally, we compute parity-violating electron scattering in the conditions of the {sup 208}Pb parity radius experiment (PREX) and obtain a pocket formula for the parity-violating asymmetry in terms of the parameters that characterize the shape of the {sup 208}Pb nucleon densities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling Lithium Diffusion in Battery Cathodes Considering Chemo-Mechanically Induced Damage

This talk will present a 3D, continuum-level damage model for simulating Lithium diffusion within generated Li_{x}Ni_{0.5}Mn_{0.3}Co_{0.2} (NMC 532) secondary cathode particles. The primary motivation of the particle-level model is to inform cathode-particle design and determine charging profiles that reduce cathode fracture. The model considers NMC 532 secondary particles containing an agglomeration of anisotropic, randomly oriented grains. The model predicts that secondary-particle fracture is primarily due to non-ideal grain interactions with slight dependence on high-rate charge demands. The model predicts that small secondary-particles with large grains develop significantly less damage than larger secondary particles with small grains. Finally, the model predicts most of the chemo-mechanical damage accumulates in the first high-rate cycles. This chemo-mechanical “damage saturation” effect indicates that initial secondary-particle fracture occurs within the first few cycles, while long-term cathode degradation is not solely chemo-mechanically induced.

47 OTHER INSTRUMENTATION↗